ZERO MODE NATURAL FREQUENCY AND NONLINEAR VIBRATION OF COUPLED LATERAL AND TORSION OF A LARGE TURBINE GENERATOR

Zero mode natural frequency (ZMNF) is found during experiments. The ZMNF andvibrations resulted by it are studied. First, calculating method of the ZMNF excited byelectromagnetic in vibrational system of coupled mechanics and electrics are given from the view ofmagnetic energy. Laws that the ZMNF varies with active power and exciting current are obtained andare verified by experiments. Then, coupled lateral and torsional vibration of rotor shaft system isstudied by considering rest eccentricity, rotating eccentricity and swing eccentricity. UsingLargrange-Maxwell equation when three phases are asymmetric derives differential equation of thecoupled vibration. With energy method of nonlinear vibration, amplitude-frequency characteristics ofresonance are studied when rotating speed of rotor equals to ZMNF. The results show that ZMNF willoccur in turbine generators by the action of electromagnetic. Because ZMNF varies withelectromagnetic parameters, resonance can occur when exciting frequency of the rotor speed is fixedwhereas exciting current change. And also find that a generator is in the state of large amplitudein rated exciting current.

A semi-analytical approach for calculating the equilibrium structure and radial breathing mode frequency of single-walled carbon nanotubes

A semi-analytical model for determining the equilibrium configuration and the radial breathing mode (RBM) frequency of single-wall carbon nanotubes (CNTs) is presented. By taking advantage of the symmetry characteristics, a CNT structure is represented by five independent variables. A line search optimization procedure is employed to determine the equilibrium values of these variables by minimizing the potential energy. With the equilibrium configuration obtained, the semi-analytical model enables an efficient calculation of the RBM frequency of the CNTs. The radius and radial breathing mode frequency results obtained from the semi-analytical approach are compared with those from molecular dynamics (MD) and ab initio calculations. The results demonstrate that the semi-analytical approach offers an efficient and accurate way to determine the equilibrium structure and radial breathing mode frequency of CNTs.

Complex Mode Frequency Iteration Method for Flutter Analysis of 2-DOF Systems

For a vibration system with 2 DOF of bend and torsion, its critical flutter wind speed can be calculated by using complex mode frequency iteration (CMFI) method based on MatLab 5.2, the results of which are in agree with those acquired by wind tunnel test. Not only critical flutter wind speed, but also vibration characteristic of a system under different wind speeds can be determined. CMFI method is suitable for both of separated flow torsional flutter and classic coupling flutter analysis, which is presented by flutter analysis of an ideal thin plate and a bluff bridge deck. Furthermore, it is proved through the investigation of the relationship between flutter derivatives and its critical flutter wind speed that coupling aerodynamic derivatives are necessary for classic coupling flutter to occur.]

Bifurcation and chaos in high-frequency peak current mode Buck converter

Bifurcation and chaos in high-frequency peak current mode Buck converter working in continuous conduction mode（CCM） are studied in this paper. First of all, the two-dimensional discrete mapping model is established. Next, reference current at the period-doubling point and the border of inductor current are derived. Then, the bifurcation diagrams are drawn with the aid of MATLAB. Meanwhile, circuit simulations are executed with PSIM, and time domain waveforms as well as phase portraits in i_L–v_C plane are plotted with MATLAB on the basis of simulation data. After that, we construct the Jacobian matrix and analyze the stability of the system based on the roots of characteristic equations. Finally, the validity of theoretical analysis has been verified by circuit testing. The simulation and experimental results show that,with the increase of reference current I_（ref）, the corresponding switching frequency f is approaching to low-frequency stage continuously when the period-doubling bifurcation happens, leading to the converter tending to be unstable. With the increase of f, the corresponding Irefdecreases when the period-doubling bifurcation occurs, indicating the stable working range of the system becomes smaller.

Role of Triad Kinetic Energy Interactions for Maintenance of Upper Tropospheric Low Frequency Waves during Summer Monsoon 1988

In order to determine nonlinear energy exchanges into individual triad interactions in the frequency domain,spectral formulas are derived by use of the cross-spectral technique. First time attempt has been made to understandthe problem of maintenance of low frequency waves for tropical weather system by using this technique.The TOGAbasic level ill daily wind analyses on a 2.5 degree square grid around the global zone from 20°S-30°N at 200 hpa for92-day periods covering June, July and August of 1988 are used. Kinetic energy is gained at high frequencies and lostat low frequencies.In the planetary scale dynamics over tropics, barotropic nonlinear energy transfer plays a negativerole.Low frequency wave of period 45 day loses maximum amount of energy when it interacted with frequencies ofperiods 92 day and 30 day.45 day cycle is also the main source of energy for other frequencies. Distrubances of periodl 5 day gain maximum amount of energy.The major contribution comes from the triad interaction of the frequencies<7,l,6>.North of 20'N low frequency waves of period 30 to 92--day gain energy through nonlinear triadinteraction with the maximum gain at 22.5'N. The study may help to investigate the rapid loss of predictability of lowfrequency modes over tropics.

THE THREE-DIMENSIONAL ANALYSIS OF THE SELF-VIBRATIONAL CHARACTERI-STICS OF THE 2050MM HOT-STRIP MILL HOUSING BY MEANS OF LASER HOLOGRAPHIC INTERFEROMETRY AND FINITE ELEMENT METHOD

According to the theory of similarity, a three-dimensional simulation study on the self-vibrational characteristics of the 2050mm hot-strip finishing mill housing at Baoshan Iron and Steel Complex has been carried out. The analysis of the main vibrational modes of the first three orders has also been done by means of holographic interferometry. In addition, the authors have carried out the numerical analysis of finite elements in three dimensions. The comparison of the results of both analyses (simulation analysis and numerical analysis of finite element) shows that they are consistent.

Extraction of mode attenuation coefficient from low frequency reverberation signal

A method of extracting normal mode attenuation coefficient from low frequency reverberation signal has been proposed.Pseudo-inverse normal mode filtering method is implemented to get single mode reverberation field firstly.Based on the assumption of separability of modal back-scattering matrix,effective back-scattering matrix element can be calculated using single mode average reverberation intensity.Finally,mode attenuation coefficient is extracted by comparing effective back-scattering matrix elements at different ranges.The extracted mode attenuation coefficients are used to predict sound transmission loss at the same experiment area. Results show that the predicted transmission loss agrees well with the measured data.This method avoids the difficult of treating the coupling between bottom scattering attenuation and normal mode propagation attenuation.Research on extraction of mode attenuation coefficient from low frequency reverberation signal is useful for both geoacoustic inversion and rapid underwater environment assessment.

Michelson interferometer composite cavity fiber laser sensor with radio frequency interrogation

A Michelson interferometer(MI) composite cavity fiber laser sensing system based on radio frequency(RF) interrogation is proposed and experimentally demonstrated. The system down-converts the traditional MI light frequency detection to RF detection, which improves the stability of the system. The optic fiber MI is placed in the laser resonator to form a composite cavity structure, which greatly improves the sensitivity of beat frequency signal demodulation.

Vortex shedding in the flow around two side-by-side circular cylinders of different diameters

In this paper,the 3-D turbulent flow around two side-by-side circular cylinders of different diameters,at sub-critical Reynolds number（Re=3 900）,is numerically simulated by the large eddy simulation（LES）.The spacing ratios（T/D）between the two cylinders are considered in four cases（T/D=1.2,1.5,1.8 and 2.7）to study the vortex shedding and turbulent properties in the flow field.The main results are focused on the drag and lift coefficients,the vortex shedding frequency,the coherent structure,and the scale properties.It is shown that when T/D is equal to 1.2,the vortex shedding of the main cylinder is strongly suppressed by the small cylinder,the drag and lift coefficients of the main cylinder are smaller than those in other three cases.While T/D is equal to 1.5,the vortex shedding of the main cylinder can be improved,the drag and lift coefficients of the main cylinder are larger than those in other three cases.The empirical mode decomposition（EMD）method is applied to decompose the velocity signals traced by the LES.It is shown that there is a linear relationship between the mean period and the mode in the semi-log coordinates.The vortex shedding period of the main cylinder is consistent with the period of the restructured coherent structures quantitatively.