A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） techn...A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） technology. The structure parameters of CRLH NLTLs, e.g. host transmission line, rectangular spiral inductor, and nonlinear capacitor, have a great impact on the second harmonic performance enhancement in terms of second harmonic frequency, output power, and conversion efficiency. It has been experimentally demonstrated that the second harmonic frequency is deter- mined by the anomalous dispersion of CRLH NLTLs and can be significantly improved by effectively adjusting these structure parameters. A good agreement between the measured and simulated second harmonic performances of Ka-band CRLH NLTLs frequency multipliers is successfully achieved, which further validates the design approach of frequency multipliers on CRLH NLTLs and indicates the potentials of CRLH NLTLs in terms of the generation of microwave and millimeter-wave signal source.展开更多
An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapt...An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapter board technology.Four layers of high-resistance silicon substrate stack packaging are implemented based on the wafer-level gold-gold bonding process.Each layer adopts though silicon via(TSV)technology to realize signal interconnection.A core monolithic integrated microwave chip(MMIC)is embedded in the silicon cavity,and the silicon-based filter is integrated with the high-resistance silicon substrate.The interconnect line,cavity and filter of the silicon-based adapter board are designed with AutoCAD,and HFSS is adopted for 3D electromagnetic field simulation.According to the measured results,the radio frequency(RF)of the mixing multi-function chip is 40-44 GHz and its intermediate frequency(IF)can cover the Ku band with a chip size of 10 mm×11 mm×1 mm.The multiplier multi-function chip operates at 16-20 GHz.The fundamental suppression is greater than 50 dB and the second harmonic suppression is better than 40 dB with a chip size of 8 mm×8 mm×1 mm.The cascaded fully assembled mixing component achieves a spur of better than-50 dBc and a gain of better than 15 dB.展开更多
<div style="text-align:justify;"> A photonics approach to generate a linearly chirped waveform with increased TBWP is proposed and investigated. The time bandwidth product (TBWP) of the linearly chirpe...<div style="text-align:justify;"> A photonics approach to generate a linearly chirped waveform with increased TBWP is proposed and investigated. The time bandwidth product (TBWP) of the linearly chirped waveform is improved based on optical microwave frequency multiplying combined with temporal synthesis. An integrated dual-polarization modulator and an optical filter are utilized to perform frequency doubling operation by generating an orthogonally polarized optical signal, which consists of an optical carrier in one polarization direction and a second-order chirped optical sideband in another. Then the orthogonally polarized optical signal puts into a polarization modulator (PolM) to perform phase coding process. By driving a Pseudorandom (PN) sequence to the PolM, the time duration of the generated bandwidth doubled linearly chirped waveform can be synthesized to arbitrary length. The approach is verified by simulation. A linearly chirped waveform with central frequency of 8.25 GHz, bandwidth of 500 MHz, time duration of 6.4 ns is used to generate a synthesized waveform with central frequency of 16.5 GHz, bandwidth of 1 GHz, time duration of 819.2 ns. The TBWP of the linearly chirped signal is improved from 3.2 to 819.2. The proposed method features arbitrary large TBWP, and it can be used in a radar system to improve its resolution. </div>展开更多
From the point of view of system design, a configuration of fiber-optic interferomet- ric hydrophone array and its modulation and demodulation approach using frequncy division multiplexing technique based on Phase Gen...From the point of view of system design, a configuration of fiber-optic interferomet- ric hydrophone array and its modulation and demodulation approach using frequncy division multiplexing technique based on Phase Generated Carrier (PGC) is introduced. And the em- phasis on demonstrating the relationship among the number of units N, the detectable signal amplitude D and the detectable frequency ws through analyzing the frequency spectrum of the output signal of the J × K array and the key factor which restricts N, D, Ws for increasing are presented. The maximum phare shift and the law of its variation according to frequency are specially analyzed. The results induced from some relative theory were verified by experiments.展开更多
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.61401373)the Research Fund for the Doctoral Program of Southwest University,China(Grant No.SWU111030)
文摘A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） technology. The structure parameters of CRLH NLTLs, e.g. host transmission line, rectangular spiral inductor, and nonlinear capacitor, have a great impact on the second harmonic performance enhancement in terms of second harmonic frequency, output power, and conversion efficiency. It has been experimentally demonstrated that the second harmonic frequency is deter- mined by the anomalous dispersion of CRLH NLTLs and can be significantly improved by effectively adjusting these structure parameters. A good agreement between the measured and simulated second harmonic performances of Ka-band CRLH NLTLs frequency multipliers is successfully achieved, which further validates the design approach of frequency multipliers on CRLH NLTLs and indicates the potentials of CRLH NLTLs in terms of the generation of microwave and millimeter-wave signal source.
文摘An ultra-wideband mixing component cascaded by a mixing multi-function chip and a frequency multiplier multi-function chip was demonstrated and implemented using 3D heterogeneous integration based on the silicon adapter board technology.Four layers of high-resistance silicon substrate stack packaging are implemented based on the wafer-level gold-gold bonding process.Each layer adopts though silicon via(TSV)technology to realize signal interconnection.A core monolithic integrated microwave chip(MMIC)is embedded in the silicon cavity,and the silicon-based filter is integrated with the high-resistance silicon substrate.The interconnect line,cavity and filter of the silicon-based adapter board are designed with AutoCAD,and HFSS is adopted for 3D electromagnetic field simulation.According to the measured results,the radio frequency(RF)of the mixing multi-function chip is 40-44 GHz and its intermediate frequency(IF)can cover the Ku band with a chip size of 10 mm×11 mm×1 mm.The multiplier multi-function chip operates at 16-20 GHz.The fundamental suppression is greater than 50 dB and the second harmonic suppression is better than 40 dB with a chip size of 8 mm×8 mm×1 mm.The cascaded fully assembled mixing component achieves a spur of better than-50 dBc and a gain of better than 15 dB.
文摘<div style="text-align:justify;"> A photonics approach to generate a linearly chirped waveform with increased TBWP is proposed and investigated. The time bandwidth product (TBWP) of the linearly chirped waveform is improved based on optical microwave frequency multiplying combined with temporal synthesis. An integrated dual-polarization modulator and an optical filter are utilized to perform frequency doubling operation by generating an orthogonally polarized optical signal, which consists of an optical carrier in one polarization direction and a second-order chirped optical sideband in another. Then the orthogonally polarized optical signal puts into a polarization modulator (PolM) to perform phase coding process. By driving a Pseudorandom (PN) sequence to the PolM, the time duration of the generated bandwidth doubled linearly chirped waveform can be synthesized to arbitrary length. The approach is verified by simulation. A linearly chirped waveform with central frequency of 8.25 GHz, bandwidth of 500 MHz, time duration of 6.4 ns is used to generate a synthesized waveform with central frequency of 16.5 GHz, bandwidth of 1 GHz, time duration of 819.2 ns. The TBWP of the linearly chirped signal is improved from 3.2 to 819.2. The proposed method features arbitrary large TBWP, and it can be used in a radar system to improve its resolution. </div>
文摘From the point of view of system design, a configuration of fiber-optic interferomet- ric hydrophone array and its modulation and demodulation approach using frequncy division multiplexing technique based on Phase Generated Carrier (PGC) is introduced. And the em- phasis on demonstrating the relationship among the number of units N, the detectable signal amplitude D and the detectable frequency ws through analyzing the frequency spectrum of the output signal of the J × K array and the key factor which restricts N, D, Ws for increasing are presented. The maximum phare shift and the law of its variation according to frequency are specially analyzed. The results induced from some relative theory were verified by experiments.
