In BEPC Ⅱ(Upgrade of Beijing Electron-Position Collider),multi-bunches and high current operation mode is usually used.Due to the influence of high frequency cavity structure or resistance impedance,the beam will be ...In BEPC Ⅱ(Upgrade of Beijing Electron-Position Collider),multi-bunches and high current operation mode is usually used.Due to the influence of high frequency cavity structure or resistance impedance,the beam will be unstable.If the beam is unstable,the luminosity and brightness of the accelerator will be decreased.In order to improve the beam current and brightness of accelerator and the collider luminosity,the beam feedback system is needed to suppress the instability.The trifold frequency multiplier by using triode is simple to operate,and it has good performance.In the experiments,the 500MHz signal was passed through the Triode Frequency Multiplier to get the 1.5GHz signal,and its output amplitude stability is 1.7mV,and its synchronization stability is 3.46ps compared with the 500MHz input signal.展开更多
A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） techn...A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） technology. The structure parameters of CRLH NLTLs, e.g. host transmission line, rectangular spiral inductor, and nonlinear capacitor, have a great impact on the second harmonic performance enhancement in terms of second harmonic frequency, output power, and conversion efficiency. It has been experimentally demonstrated that the second harmonic frequency is deter- mined by the anomalous dispersion of CRLH NLTLs and can be significantly improved by effectively adjusting these structure parameters. A good agreement between the measured and simulated second harmonic performances of Ka-band CRLH NLTLs frequency multipliers is successfully achieved, which further validates the design approach of frequency multipliers on CRLH NLTLs and indicates the potentials of CRLH NLTLs in terms of the generation of microwave and millimeter-wave signal source.展开更多
Natural frequencies for multilayer plates are calculated by mixed finite element method. The main object of this paper is to use the mixed model for multilayer plates, analyzing each layer as an isolated plate, where ...Natural frequencies for multilayer plates are calculated by mixed finite element method. The main object of this paper is to use the mixed model for multilayer plates, analyzing each layer as an isolated plate, where the continuity of displacements is achieved by Lagrange multipliers （representing static variables）. This procedure allows us to work with any model for single plate （so as to ensure the proper behavior of each layer）, and the complexity of the multilayer system is avoided by ensuring the condition of displacements by the Lagrange multipliers （static variables）. The plate is discretized by finite element modeling based on a primary hybrid model, where the domain is divided by quadrilateral, both for the displacement field and static variables. This mixed element for plates was implemented and several examples of vibrations have been verified successfully by the results obtained by other methods in the literature.展开更多
文摘In BEPC Ⅱ(Upgrade of Beijing Electron-Position Collider),multi-bunches and high current operation mode is usually used.Due to the influence of high frequency cavity structure or resistance impedance,the beam will be unstable.If the beam is unstable,the luminosity and brightness of the accelerator will be decreased.In order to improve the beam current and brightness of accelerator and the collider luminosity,the beam feedback system is needed to suppress the instability.The trifold frequency multiplier by using triode is simple to operate,and it has good performance.In the experiments,the 500MHz signal was passed through the Triode Frequency Multiplier to get the 1.5GHz signal,and its output amplitude stability is 1.7mV,and its synchronization stability is 3.46ps compared with the 500MHz input signal.
基金Project supported by the Young Scientists Fund of the National Natural Science Foundation of China(Grant No.61401373)the Research Fund for the Doctoral Program of Southwest University,China(Grant No.SWU111030)
文摘A bandwidth microwave second harmonic generator is successfully designed using composite right/left-handed non- linear transmission lines （CRLH NLTLs） in a GaAs monolithic microwave integrated circuit （MMIC） technology. The structure parameters of CRLH NLTLs, e.g. host transmission line, rectangular spiral inductor, and nonlinear capacitor, have a great impact on the second harmonic performance enhancement in terms of second harmonic frequency, output power, and conversion efficiency. It has been experimentally demonstrated that the second harmonic frequency is deter- mined by the anomalous dispersion of CRLH NLTLs and can be significantly improved by effectively adjusting these structure parameters. A good agreement between the measured and simulated second harmonic performances of Ka-band CRLH NLTLs frequency multipliers is successfully achieved, which further validates the design approach of frequency multipliers on CRLH NLTLs and indicates the potentials of CRLH NLTLs in terms of the generation of microwave and millimeter-wave signal source.
文摘Natural frequencies for multilayer plates are calculated by mixed finite element method. The main object of this paper is to use the mixed model for multilayer plates, analyzing each layer as an isolated plate, where the continuity of displacements is achieved by Lagrange multipliers （representing static variables）. This procedure allows us to work with any model for single plate （so as to ensure the proper behavior of each layer）, and the complexity of the multilayer system is avoided by ensuring the condition of displacements by the Lagrange multipliers （static variables）. The plate is discretized by finite element modeling based on a primary hybrid model, where the domain is divided by quadrilateral, both for the displacement field and static variables. This mixed element for plates was implemented and several examples of vibrations have been verified successfully by the results obtained by other methods in the literature.
