Parameters in wind-wave frequency spectra and their bearings on spectrum forms and growth

The spectrum variance m0, peak frequency ω0 and peakness factor p are expressed in terms of nondimensional fetch and duration by making use of relations which are derived through comparing and analyzing existing empirical formulas for the growth of significant wave height and period. The main features of spectrum growth as specified by these parameters agree with those of the JONS-WAP experiments. For given wind speed and fetch, the high frequency parts beyond the peaks of shallow water spectra almost coincide with that of the corresponding deep water spectrum, whereas the low frequency parts differ appreciably. The method developed in this paper predicts smaller significant wave height as well as smaller wave period for shallow water spectra in contrast to the theoretical result of Kitaigorodskii ef al, in which the peak frequency, and consequently the significant wave period, remains basically unchanged for different water depths. Spectra are further reduced to a form in which only significant wave height and period are left as parameters, the peakness factor being replaced by the wave steepness through an empirical relation between them. Spectra in this form have been verified by observations.

Optimal Microwave Radiation Field Parameters for Mercury Ion Microwave Frequency Standards

We propose a method to determine the optimal power of the microwave resonance transition that simultaneously improves the signal-to-noise ratio and reduces line width based on saturation broadening theory and experiment. Saturation broadening spectra of the ground state hyperfine transition of trapped 199Hg＋ ions are measured and analyzed. The value of the optimal microwave power is obtained by using the proposed method and is verified. Rabi oscillations decay spectra of trapped 199Hg＋ ions are observed and the optimal microwave irradiation time for the maximum transition signal intensity is determined. This work will help to improve the short-term frequency stability of the mercury ion microwave frequency standard.

Two-step compressed acquisition method for Doppler frequency and Doppler rate estimation in high-dynamic and weak signal environments

To acquire global navigation satellite system(GNSS)signals means four-dimension acquisition of bit transition,Doppler frequency,Doppler rate,and code phase in high-dynamic and weak signal environments,which needs a high computational cost.To reduce the computations,this paper proposes a twostep compressed acquisition method(TCAM)for the post-correlation signal parameters estimation.Compared with the fast Fourier transform(FFT)based methods,TCAM uses fewer frequency search points.In this way,the proposed method reduces complex multiplications,and uses real multiplications instead of improving the accuracy of the Doppler frequency and the Doppler rate.Furthermore,the differential process between two adjacent milliseconds is used for avoiding the impact of bit transition and the Doppler frequency on the integration peak.The results demonstrate that due to the reduction of complex multiplications,the computational cost of TCAM is lower than that of the FFT based method under the same signal to noise ratio(SNR).

Spheroidization of molybdenum powder by radio frequency thermal plasma

To control the morphology and particle size of dense spherical molybdenum powder prepared by radio frequency（RF） plasma from irregular molybdenum powder as a precursor, plasma process parameters were optimized in this paper. The effects of the carrier gas flow rate and molybdenum powder feeding rate on the shape and size of the final products were studied. The molybdenum powder morphology was examined using high-resolution scanning electron microscopy. The powder phases were analyzed by X-ray diffraction. The tap density and apparent density of the molybdenum powder were investigated using a Hall flow meter and a Scott volumeter. The optimal process parameters for the spherical molybdenum powder preparation are 50 g/min powder feeding rate and 0.6 m^3/h carrier gas rate. In addition, pure spherical molybdenum powder can be obtained from irregular powder, and the tap density is enhanced after plasma processing. The average size is reduced from 72 to 62 μm, and the tap density is increased from 2.7 to 6.2 g/cm^3. Therefore, RF plasma is a promising method for the preparation of high-density and high-purity spherical powders.

Influence of porosity distribution on nonlinear free vibration and transient responses of porous functionally graded skew plates

This article deals with the investigation of the effects of porosity distributions on nonlinear free vibration and transient analysis of porous functionally graded skew(PFGS)plates.The effective material properties of the PFGS plates are obtained from the modified power-law equations in which gradation varies through the thickness of the PFGS plate.A nonlinear finite element(FE)formulation for the overall PFGS plate is derived by adopting first-order shear deformation theory(FSDT)in conjunction with von Karman’s nonlinear strain displacement relations.The governing equations of the PFGS plate are derived using the principle of virtual work.The direct iterative method and Newmark’s integration technique are espoused to solve nonlinear mathematical relations.The influences of the porosity distributions and porosity parameter indices on the nonlinear frequency responses of the PFGS plate for different skew angles are studied in various parameters.The effects of volume fraction grading index and skew angle on the plate’s nonlinear dynamic responses for various porosity distributions are illustrated in detail.

Low frequency characteristic parameters measurement of vented-box loudspeaker system using total least squares method

The interrelationship between the ARMA model parameters of a vented-box loud-speaker system and lowthequency characteristic parameters is analysed in this paper. These AANA model parameters are deterndned by the total least squares (TLS) method. Therefore, we can measure in the timedomain the fow frequency characteristic parameters of a vented-box loudspeaker system, its impendance curvs and low-frquency response curves. These measured results show a satisfactory agreement with the values obtained by the frequency-domain measurement.

Effects of sediment parameters on the low frequency acoustic wave propagation in shallow water

The integral expression for acoustic field due to a point source in shallow waterwhile sediment is either a liquid or a solid is derived. The synthetic full waveforms are simulatedusing real axis integration and FFF method. The effects of the seabed sediment parametersand center frequency of the source on the low frequency acoustic wave propagation in shallowwater are investigated. The conclusion is that the wave groups received in far field are thoseof the mode waves of the source center frequency. The possibility for inversely deducing thecompressional and shear sound speeds of sediment using the least square optimum through themeasured group velocities of a selected mode at different frequencies is discussed.

Hydromagnetic oscillatory Couette flow in rotating system with induced magnetic field

This paper presents a study of hydromagnetic Couette flow of an incompress- ible and electrically conducting fluid between two parallel rotating plates, one of which is oscillating in its own plane. A uniform transverse magnetic field is used, and the induced magnetic field is taken into account. The exact solution to the governing equations is obtained in a closed form. The solution to the problem in the case of vanishing and small finite magnetic Prandtl numbers is also derived from the general solution. The asymp- totic behavior of the solution for large values of the frequency parameter is analyzed to gain some physical insights into the flow pattern. Expressions for the shear stress at both the oscillatory and stationary plates due to primary and secondary flows and mass flow rate in the primary and secondary flow directions are also obtained. The results of the fluid velocity and the induced magnetic field are presented. The shear stresses on the plates due to the primary and secondary flows and the corresponding mass flow rates are presented in a tabular form.

Modeling of aggregation kernels for fluidized beds using discrete particle model simulations

Aggregation is one of the many important processes in chemical and process engineering. Several researchers have attempted to understand this complex process in fluidized beds using the macro-model of population balance equations （PBEs）. The aggregation kernel is an effective parameter in PBEs, and is defined as the product of the aggregation efficiency and collision frequency functions. Attempts to derive this kernel have taken different approaches, including theoretical, experimental, and empirical techniques. The present paper calculates the aggregation kernel using micro-model computer simulations, i.e., a discrete particle model. We simulate the micro-model without aggregation for various initial conditions, and observe that the collision frequency function is in good agreement with the shear kernel. We then simulate the micro-model with aggregation and calculate the aggregation efficiency rate.