Solid-state impedance spectroscopy studies of dielectric properties and relaxation processes in Na_(2)O–V_(2)O_(5)–Nb_(2)O_(5)–P_(2)O_(5) glass

Solid-state impedance spectroscopy(SS-IS)was used to investigate the influence of structural modifications resulting from the addition of Nb2O5 on the dielectric properties and relaxation processes in the quaternary mixed glass former(MGF)system 35Na_(2)O–10V_(2)O_(5)–(55-x)P_(2)O_(5)–xNb_(2)O_(5)(x=0–40,mol%).The dielectric parameters,including the dielectric strength and dielectric loss,are determined from the frequency and temperature-dependent complex permittivity data,revealing a significant dependence on the Nb2O5 content.The transition from a predominantly phosphate glass network(x<10,region I)to a mixed niobate–phosphate glass net-work(10≤x≤20,region II)leads to an increase in the dielectric parameters,which correlates with the observed trend in the direct-cur-rent(DC)conductivity.In the predominantly niobate network(x≥25,region III),the highly polarizable nature of Nb5+ions leads to a fur-ther increase in the dielectric permittivity and dielectric strength.This is particularly evident in Nb-40 glass-ceramic,which contains Na_(13)Nb_(35)O_(94) crystalline phase with a tungsten bronze structure and exhibits the highest dielectric permittivity of 61.81 and the lowest loss factor of 0.032 at 303 K and 10 kHz.The relaxation studies,analyzed through modulus formalism and complex impedance data,show that DC conductivity and relaxation processes are governed by the same mechanism,attributed to ionic conductivity.In contrast to glasses with a single peak in frequency dependence of imaginary part of electrical modulus,M″(ω),Nb-40 glass-ceramic exhibits two distinct contributions with similar relaxation times.The high-frequency peak indicates bulk ionic conductivity,while the additional low-fre-quency peak is associated with the grain boundary effect,confirmed by the electrical equivalent circuit(EEC)modelling.The scaling characteristics of permittivity and conductivity spectra,along with the electrical modulus,validate time-temperature superposition and demonstrate a strong correlation with composition and modification of the glass structure upon Nb_(2)O_(5) incorporation.

Molecular dynamics of amorphous pharmaceutical fenofibrate studied by broadband dielectric spectroscopy

Fenofibrate is mainly used to reduce cholesterol level in patients at risk of cardiovascular disease. Thermal transition study with the help of differential scanning calorimetry （DSC） shows that the aforesaid active pharmaceutical ingredient （API） is a good glass former. Based on our DSC study, the molecular dynamics of this API has been carried out by broadband dielectric spectroscopy （BDS） covering wide temperature and frequency ranges. Dielectric measurements of amorphous fenofibrate were per- formed after its vitrification by fast cooling from a few degrees above the melting point （Tm=354.11 K） to deep glassy state. The sample does not show any crystallization tendency during cooling and reaches the glassy state. The temperature dependence of the structural relaxation has been fitted by single Vogel- Fulcher-Tamman （VFT） equation. From VFT fit, glass transition temperature （Tg） was estimated as 250.56 K and fragility （m） was determined as 94.02. This drug is classified as a fragile glass former. Deviations of experimental data from Kohlrausch-Williams-Watts （KWW） fits on high-frequency flank of α-peak indicate the presence of an excess wing in fenofibrate. Based on Ngai＇s coupling model, we identified the excess wing as true Johari-Goldstein （JG） process. Below the glass transition temperature one can clearly see a secondary relaxation （γ） with an activation energy of 32.67 kJ/mol.

Measurement of OH Radicals in Dielectric Barrier Discharge Plasmas by Cavity Ring-Down Spectroscopy

Near-infrared continuous wave cavity ring-down spectroscopy was applied to mea- sure the OH radicals in dielectric barrier discharge plasmas, which play an important role in combustion systems, atmospheric chemistry and the removal of air pollutants by non-thermal plasmas. The P-branches of OH X2YIi （vI ： 2 ＋-- it 0） bands were used for number density measurements. The OH number density and plasma temperature were determined for different applied voltages, gas pressures and concentrations of both oxygen and water. The temporal evolu- tion of the OH number density was obtained by using the ＂time window＂ method, which was used to extract individual ring-down times at different times in a half period of the sine wave applied voltage in dielectric barrier discharge plasmas.

Dielectric Spectroscopy Study on Vesicles of CTAB/SDBS System

Amphiphilic molecules can form into different structures, such as micelle, microemulsion, vesicle, liposome, liquid crystals, and so on by self-associating. The Dielectric Spectroscopy (DS) method has been applied to the systems of micelle and microemulsion successfully. For the first time the author put the method to the system of vesicle of CTAB/SDBS. The experiments show clear dielectric relaxation and the results were discussed primarily.

Spatial sensitivity to absorption changes for various near-infrared spectroscopy methods:A compendium review

This compendium review focuses on the spatial distribution of sensitivity to localized absorption changes in optically diffuse media,particularly for measurements relevant to near-infrared spectroscopy.The three temporal domains,continuous wave,frequency domain,and time domain,each obtain different optical data types whose changes may be related to effective homogeneous changes in the absorption coefficient.Sensitivity is the relationship between a localized perturbation and the recovered effective homogeneous absorption change.Therefore,spatial sensitivity maps representing the perturbation location can be generated for the numerous optical data types in the three temporal domains.The review first presents a history of the past 30 years of work investigating this sensitivity in optically diffuse media.These works are experimental and theoretical,presenting one-,two-,and three-dimensional sensitivity maps for different Near-Infrared Spectroscopy methods,domains,and data types.Following this history,we present a compendium of sensitivity maps organized by temporal domain and then data type.This compendium provides a valuable tool to compare the spatial sensitivity of various measurement methods and parameters in one document.Methods for one to generate these maps are provided in Appendix A,including the code.This historical review and comprehensive sensitivity map compendium provides a single source researchers may use to visualize,investigate,compare,and generate sensitivity to localized absorption change maps.

An Investigation of Structure Transition in Sodium Dodecyl Trioxyethylene Sulfate/n-Butanol/n-Octane/Water System by Dielectric Relaxation Spectroscopy Method

The phase diagram of the quaternary system of sodium dodecyl trioxyethylene sulfate(SDES)/n-butanol/n-octane/water was obtained at (30.0±0.1) ℃. There exists a clear, isotropic, and low-viscosity L phase, which can be divided into W/O, bi-continuous(B.C.) and O/W microemulsions by conductivity measurement results. Dielectric Relaxation Spectroscopy(DRS) measurements, including permittivity, conductivity, relaxation strength, characteristic relaxation time, dielectric parameters, phase parameters, etc., were applied to investigating the microstructures of the system mentioned above. For the samples with a fixed SDES/n-butanol mass ratio of 4/6 including 20%(mass fraction) of n-octane, DRS indicated a structure transition from a W/O to an O/W via a B.C. microemulsion with the increase of the water content. For the samples with a fixed (SDES/20%n-octane)/H_2O mass ratio of 5/5, DRS presented that there only exists a onefold structure of a W/O microemulsion as the (n-butanol/20%n-octane) content increases. The results obtained from DRS are in good agreement with those from the phase diagram.

Studies on the Phase Properties of Winsor Ⅰ-Ⅲ Type Microemulsions with Dielectric Relaxation Spectroscopy

The dielectric relaxation spectroscopy （DRS） of Winsor I -Ⅲ microemulsions for nonionic surfactant octyl polyglucoside CsG1.46/1-butanol/cyclohexanedwater system was studied. The experiment shows that the permittivity decreases with the increase in the frequency and clear dielectric relaxation phenomena were observed. Permittivity obviously decreases with the change of the microstructure of the microemulsion, W/O, B.C. and O/W can be distinguished by the permittivity.

The Research of Connection between Degree of Polymerization and Frequency Domain Dielectric Spectroscopy Characteristics during Oil-Paper Insulation Aging

In order to study the linkage effects between degree of polymerization and frequency domain dielectric spectroscopy characteristics of oil-paper insulation, the frequency domain dielectric response test platform of oil-paper insulation is set up. Complex permittivity of oil-paper insulation respectively composed by new or aged oil and insulation paper with different DP are tested, and complex permittivity of oil-paper insulation respectively composed by insulation respectively composed by new oil and insulation paper with different DP and low or high moisture content are tested. The test results are analyzed, and the analysis results show that the degree of polymerization of insulation paper has an influence on complex permittivity of oil-paper insulation though influencing the distribution of moisture and acids between oil and paper.

Diagnostics of Argon Inductively Coupled Plasma and Dielectric Barrier Discharge Plasma by Optical Emission Spectroscopy

An experimental setup was built up to carry out radio frequency (RF) inductively coupled plasma (ICP) and dielectric barrier discharge (DBD), and to depict the optical emission spectra (OES) of the discharges. OES from argon ICP and DBD plasmas in visible and near ultraviolet region were measured. For argon ICP, the higher RF power input (higher than 500 W for our machine), the higher degree of argon plasma ionization. But that doesn't mean a higher mean electron energy. With the increase in the power input, the mean electron energy increases slightly, whereas the density of electron increases apparently On the contrary, argon DBD discharge behaves in the manner of a pulsed DC discharge on optical emission spectroscopy and V-I characteristics. DBD current is composed of a series of pulses equally spaced in temporal domain. The Kinetics of DBD emission strength is mainly governed by the frequency of the current pulse.

Aspects of the upstream region in a plasma jet with dielectric barrier discharge configurations

A plasma column with a length of about 65 cm is generated in the upstream region of a plasma jet using dielectric barrier discharge configurations. The effects of experimental parameters such as the amplitude of the applied voltage and the driving frequency are investigated in aspects of the plasma column by the optical method. Results show that both the plasma length and the propagating velocity, as well as the discharge current, increase with the increase in the applied voltage or its frequency. The discharge mechanism is analysed qualitatively based on streamer theory, where photo-ionization is important. Furthermore, optical emission spectroscopy is used to investigate the electric field intensity of the upstream region.

Oxygen-vacancy-related dielectric relaxation and conduction mechanisms in Bi5TiNbWO15 ceramics

This paper reports that the intergrowth ceramics Bi5TiNbWO15 （BW-BTN） have been prepared with the conventional solid-state reaction method. The dielectric and conductivity properties of samples were studied by using the dielectric relaxation and AC impedance spectroscopy in detail. Two distinct relaxation mechanisms were detected both in the plots of dielectric loss （tanδ） and the imaginary part （Z″） versus frequency in the frequency range of 10 Hz-13 MHz. We attribute the higher frequency relaxation process to the hopping process of the oxygen vacancies inside the grains, while the other seems to be associated with the space charges bound at the grain boundary layers. The AC impedance spectroscopy indicates that the conductivities at 625 K for bulk and grain boundary are about 1.12 × 10^-2 S/m and 1.43 × 10^-3 S/m respectively. The accumulation of the space charges in the grain boundary layers induces a space charge potential of 0.52 eV.

Dielectric Behavior of Middle Phase Microemulsion

Dielectric measurements were performed on middle phase microemulsions composed of sodium dodecylsulfate(SDS), cetyltrimethylammonium bromide(CTAB), n-butanol, n-heptane and brine. Distinct and unique dielectric behavior, with characteristic frequency dependence regularity on the salinity of the microemulsions, was observed in the low-frequency range from 10-10(3)Hz. It can be considered to be an interfacial polarization mechanism.

Surface Modification of Fluororubber Using Atmospheric Pressure Dielectric Barrier Discharge(DBD)

Fluoride rubber F2311 film, an alternating copolymer of CF2-CFC1 （CTFE） and CH2-CF2 （VF2） components, was treated by atmospheric pressure dielectric barrier discharge （DBD） in air. The surface structure, topography and surface chemistry of the treated F2311 films were characterized by contact angle measurement, atomic force microscopy （AFM）, and X-ray photoelectron spectroscopy （XPS）, respectively. The experimental results showed that a short time air plasma treatment led to morphological, wettability and chemical changes in the F2311 films. The surface hydrophilicity increased greatly after the plasma treatment, the static water contact angle decreased from 98.6° to 32°, and oxygen containing groups （C=O, O-C=O, etc. ） were introduced. Atomic force microscopy revealed that plasma produced by DBD etched F2311 films obviously. The roughness of the samples increased remarkably with the formation of peaks and valleys on the treated surfaces. The increased surface wettability may be correlated with both the introduction of hydrophilic groups due to air plasma oxidation of the surface and the change in surface morphology etched by DBD.

Microstructure and microwave dielectric properties of CaO-B_2O_3-SiO_2 glass ceramics with various B_2O_3 contents

The effects of B2O3 addition on both the sintering behavior and microwave dielectric properties of CaO-B2O3-SiO2 (CBS) glass ceramics were investigated by Fourier transform infrared spectroscopy (FTIR),X-ray diffractometry (XRD) and scanning electron microscopy (SEM).The results show that the increasing amount of B2O3 causes the increase of the contents of [BO3],[BO4] and [SiO4],which deduces the increase of CaB2O4 and α-SiO2 and the decrease of CaSiO3 correspondingly.No new phase is observed throughout the entire experiments.A bulk density of 2.54 g/cm3,a thermal expansion coefficient value of 11.95×10-6 °C -1 (20-500°C),a dielectric constant εr value of 6.42 and a dielectric loss tan δ value of 0.000 9 (measured at 9.7 GHz) are obtained for CBS glass ceramics containing 35% B2O3 (mass fraction) sintered at 850 °C for 15 min.

Composite Materials Damage Modeling Based on Dielectric Properties

Composite materials, by nature, are universally dielectric. The distribution of the phases, including voids and cracks, has a major influence on the dielectric properties of the composite materials. The dielectric relaxation behavior measured by Broadband Dielectric Spectroscopy (BbDS) is often caused by interfacial polarization, which is known as Maxwell-Wagner-Sillars polarization that develops because of the heterogeneity of the composite materials. A prominent mechanism in the low frequency range is driven by charge accumulation at the interphases between different constituent phases. In our previous work, we observed in-situ changes in dielectric behavior during static tensile testing, and also studied the effects of applied mechanical and ambient environments on composite material damage states based on the evaluation of dielectric spectral analysis parameters. In the present work, a two dimensional conformal computational model was developed using a COMSOL&trade;multi-physics module to interpret the effective dielectric behavior of the resulting composite as a function of applied frequency spectra, especially the effects of volume fraction, the distribution of the defects inside of the material volume, and the influence of the permittivity and Ohmic conductivity of the host materials and defects.

Dielectric and infrared properties of SrTiO_3 single crystal doped by 3d (V,Mn,Fe,Ni) and 4f (Nd,Sm,Er) ions

In this study, the effects of doping by 3d （V, Mn, Fe, Ni） and 4f （Nd, Sm, Er） ions on dielectric and infrared properties of SrTiO3 （STO） single crystals are investigated. It is well known that doping of the SrTiO3 can change the dielectric properties of the STO from an insulator to an n-type semiconductor, and even to a metallic conductor. Dielectric and infrared （IR） properties of the undoped STO and doped STO single crystals are analyzed using dielectric spectroscopy （80 kHz-5 MHz）, transmission （200 cm^-1-4000 cm^-1）, and reflection spectroscopy （50 cm^-1-2000 cm^-1）. It is found that doping by the 3d ions reduces the value of dielectric permittivity, but the trend of temperature dependence of the dielectric permittivity remains almost unchanged. On the other hand, dielectric spectroscopy measurements for samples doped by 4f ions show the anomalous behaviors of the dielectric permittivity at temperatures around the temperature of the structural phase transition. There are two fractures of temperature dependences of inverse dielectric permittivity εr^-1 （T）. Transmittance spectroscopy measurements show that there are differences in the shape of the spectrum in the mid-IR region between the undoped STO and the one doped by 4f ions. The differences in the reflectance spectrum between the STO：Nd and STO are analyzed in detail.

Study on the transition from filamentary discharge to diffuse discharge by using a dielectric barrier surface discharge device

Discharge characteristics have been investigated in different gases under different pressures using a dielectric barrier surface discharge device. Electrical measurements and optical emission spectroscopy are used to study the discharge, and the results obtained show that the discharges in atmospheric pressure helium and in low-pressure air are diffuse, while that in high-pressure air is filamentary. With decreasing pressure, the discharge in air can transit from filamentary to diffuse one. The results also indicate that corona discharge around the stripe electrode is important for the diffuse discharge. The spectral intensity of N＋ （391.4nm） relative to N2 （337.1 nm） is measured during the transition from diffuse to filamentary discharge. It is shown that relative spectral intensity increases during the discharge transition. This phenomenon implies that the averaged electron energy in diffuse discharge is higher than that in the filamentary discharge.

Dielectric Spectra of Aerosol OT/Water Systems at Different Concentrations and Temperatures

The dielectric spectra of aerosol OT[AOT, sodium（bis-2-ethylhexyl）sulfosuccinate]/water systems at different concentrations and temperatures were investigated by the dielectric relaxation spectroscopy（DRS）. Through the dielectric spectra of different concentrations, two dielectric relaxations were observed over a frequency range from 40 Hz to 110 MHz and the mechanisms of the relaxations were also interpreted based on the Grosse’s model. The low-frequency relaxation（around 105 Hz） was attributed to the radial diffusion of counterions along the long-half axis of the rod-like micelle, and the high-frequency relaxation（around 106 Hz） was ascribed to the radial diffusion of counterions along the short-half axis. Furthermore, specific emphasis was placed on studying the effects of temperature on system’s conductivity. It was observed that the low-frequency limit of conductivity（κl） decreased and then increased with the increment of temperature under the measured concentration. On the other hand, the conductivity（κm and κh） in meso- and high-frequency ranges always increased as temperature increased. Both the tendencies of alteration which mentioned above should be related to the phase transition of AOT/water system.