Reliable transmission of consultative committee for space data systems file delivery protocol in deep space communication

In consultative committee for space data systems（CCSDS） file delivery protocol（CFDP） recommendation of reliable transmission,there are no detail transmission procedure and delay calculation of prompted negative acknowledge and asynchronous negative acknowledge models.CFDP is designed to provide data and storage management,story and forward,custody transfer and reliable end-to-end delivery over deep space characterized by huge latency,intermittent link,asymmetric bandwidth and big bit error rate（BER）.Four reliable transmission models are analyzed and an expected file-delivery time is calculated with different trans-mission rates,numbers and sizes of packet data units,BERs and frequencies of external events,etc.By comparison of four CFDP models,the requirement of BER for typical missions in deep space is obtained and rules of choosing CFDP models under different uplink state informations are given,which provides references for protocol models selection,utilization and modification.

Robust control for a class of nonlinear networked systems with stochastic communication delays via sliding mode conception

This paper deals with the robust control problem for a class of uncertain nonlinear networked systems with stochastic communication delays via sliding mode conception （SMC）. A sequence of variables obeying Bernoulli distribution are employed to model the randomly occurring communication delays which could be different for different state variables. A discrete switching function that is different from those in the existing literature is first proposed. Then, expressed as the feasibility of a linear matrix inequality （LMI） with an equality constraint, sufficient conditions are derived in order to ensure the globally mean-square asymptotic stability of the system dynamics on the sliding surface. A discrete-time SMC controller is then synthesized to guarantee the discrete-time sliding mode reaching condition with the specified sliding surface. Finally, a simulation example is given to show the effectiveness of the proposed method.

H-infinity performance optimization for networked control systems with limited communication channels

This paper studies the problems of H-infinity performance optimization and controller design for continuous-time NCSs with both sensor-to-controller and controller-to-actuator communication constraints （limited communication channels）. By taking the derivative character of network-induced delay into full consideration and defining new Lyapunov functions, linear matrix inequalities （LMIs）-based H-infinity performance optimization and controller design are presented for NCSs with limited communication channels. If there do not exist any constraints on the communication channels, the proposed design methods are also applicable. The merit of the proposed methods lies in their Jess conservativeness, which is achieved by avoiding the utilization of bounding inequalities for cross products of vectors. The simulation results illustrate the merit and effectiveness of the proposed H-infinity controller design for NCSs with limited communication channels.

A Secure Key Management Scheme for Heterogeneous Secure Vehicular Communication Systems

Intelligent transportation system （ITS） is proposed as the most effective way to improve road safety and traffic efficiency. However, the future of ITS for large scale transportation infrastructures deployment highly depends on the security level of vehicular communication systems （VCS）. Security applications in VCS are fulfilled through secured group broadcast. Therefore, secure key management schemes are considered as a critical research topic for network security. In this paper, we propose a framework for providing secure key management within heterogeneous network. The seeurity managers （SMs） play a key role in the framework by retrieving the vehicle departnre infi^rmation, encapsulating block to transport keys and then executing rekeying to vehicles within the same security domain. The first part of this framework is a novel Group Key Management （GKM） scheme basing on leaving probability （LP） of vehicles to depart current VCS region. Vehicle＇s LP factor is introduced into GKM scheme to achieve a more effieient rekeying scheme and less rekeying costs. The second component of the framework using the blockchain concept to simplify the distributed key management in heterogeneous VCS domains. Extensive simulations and analysis are provided to show the effectiveness and effieiency of the proposed framework： Our GKM results demonstrate that probability-based BR reduees rekeying eost compared to the benchmark scheme, while the blockchain deereases the time eost of key transmission over heterogeneous net-works.

Frequency Reconfigurable Antenna for Multi Standard Wireless and Mobile Communication Systems

In this paper,low profile frequency reconfigurable monopole antenna is designed on FR-4 substrate with a compact size of 30 mm^(3)×20 mm^(3)×1.6 mm^(3).The antenna is tuned to four different modes through three pin diode switches.In Mode 1(SW1 to SW3=OFF),antenna covers a wideband of 3.15–8.51 GHz.For Mode 2(SW1=ON,SW2 to SW3=OFF),the proposed antenna resonates at 3.5 GHz.The antenna shows dual band behavior and covers 2.6 and 6.4 GHz in Mode 3(SW1 and SW2=ON,SW3=OFF).The same antenna covers three different bands of 2.1,5 and 6.4 GHz when operating in Mode 4(SW1 to SW3=ON).The proposed antenna has good radiation efficiency ranges from 70%∼84%,providing adequate average gain of 2.05 dBi in mode 1,1.87 dBi in mode 2,1.4–1.75 dBi in mode 3 and 1.05–1.56 dBi in mode 4.The achieved impedance bandwidths at respective frequencies ranges from 240 to 5000 MHz.The Voltage Standing Waves Ratio(VSWR)of less than 1.5 is achieved for all operating bands.To validate the simulation results,the proposed antenna is fabricated and experimentally tested in antenna measurement laboratory.Due to its reasonably small size and support of multiple bands operation,the proposed antenna can be used in modern communication systems for supporting various applications such as fifth generation(5G)mobile and wireless local area networks(WLAN).

International Journal of Systems, Control and Communications(IJSCC)

ISSN (Online): 1755-9359; ISSN (Print): 1755-9340Published in 4 issues per year. Description One of the most dramatic technological developments in the era of information is the deployment of communication networks. This on-going revolution

Exponential networked synchronization of master-slave chaotic systems with timevarying communication topologies

The networked synchronization problem of a class of master-slave chaotic systems with time-varying communication topologies is investigated in this paper. Based on algebraic graph theory and matrix theory, a simple linear state feedback controller is designed to synchronize the master chaotic system and the slave chaotic systems with a time- varying communication topology connection. The exponential stability of the closed-loop networked synchronization error system is guaranteed by applying Lyapunov stability theory. The derived novel criteria are in the form of linear matrix inequalities （LMIs）, which are easy to examine and tremendously reduce the computation burden from the feedback matrices. This paper provides an alternative networked secure communication scheme which can be extended conveniently. An illustrative example is given to demonstrate the effectiveness of the proposed networked synchronization method.

Learning-Based Switched Reliable Control of Cyber-Physical Systems With Intermittent Communication Faults

This study deals with reliable control problems in data-driven cyber-physical systems(CPSs) with intermittent communication faults, where the faults may be caused by bad or broken communication devices and/or cyber attackers. To solve them, a watermark-based anomaly detector is proposed, where the faults are divided to be either detectable or undetectable.Secondly, the fault's intermittent characteristic is described by the average dwell-time(ADT)-like concept, and then the reliable control issues, under the undetectable faults to the detector, are converted into stabilization issues of switched systems. Furthermore,based on the identifier-critic-structure learning algorithm, a datadriven switched controller with a prescribed-performance-based switching law is proposed, and by the ADT approach, a tolerated fault set is given. Additionally, it is shown that the presented switching laws can improve the system performance degradation in asynchronous intervals, where the degradation is caused by the fault-maker-triggered switching rule, which is unknown for CPS operators. Finally, an illustrative example validates the proposed method.

Threshold Characteristics Enhancement of a Single Mode 1.55 µm InGaAsP Photonic Crystal VCSEL for Optical Communication Systems

In the present work, we investigate threshold characteristics of a single mode 1.55 μm InGaAsP vertical cavity surface emitting laser (VCSEL) with two different optical confinement structures. The device employs InGaAsP active region, which is sandwiched between GaAs/AlGaAs and GaAs/AlAs distributed Bragg reflectors (DBRs). The optical confinement introduced by the oxide aperture or a single defect photonic crystal design with holes etched throughout the whole structure, is compared with previous work. Photonic crystal VCSEL shows 30.86% and 57.02% lower threshold current than that of the similar oxide confined VCSEL and previous results, respectively. This paper provides key results of the threshold characteristics, including the threshold current and the threshold power. Results suggest that, the 1.55 μm InGaAsP photonic crystal VCSEL seems to be the most optimal one for light sources in high performance optical communication systems.

Nonlocality Distillation and Trivial Communication Complexity for High-Dimensional Systems

A nonlocality distillation protocol for arbitrary high-dimensional systems is proposed. We study the nonlocality distillation in the 2-input d-output bi-partite case. Firstly, we give the one-parameter nonlocal boxes and their correlated distilling protocol. Then, we generalize the one-parameter nonlocality distillation protocol to the twoparameter case. Furthermore, we introduce a contracting protocol testifying that the 2-input d-output nonlocal boxes make communication complexity trivial.

Mean-square composite-rotating consensus of second-order systems with communication noises

We study the mean-square composite-rotating consensus problem of second-order multi-agent systems with communication noises, where all agents rotate around a common center and the center of rotation spins around a fixed point simultaneously. Firstly, a time-varying consensus gain is introduced to attenuate to the effect of communication noises. Secondly, sufficient conditions are obtained for achieving the mean-square composite-rotating consensus. Finally, simulations are provided to demonstrate the effectiveness of the proposed algorithm.

Leveraging UAV-assisted communications to improve secrecy for URLLC in 6G systems

Unmanned Aerial Vehicles(UAVs)will be essential to support mission-critical applications of Ultra Reliable Low Latency Communication(URLLC)in futuristic Sixth-Generation(6G)networks.However,several security vulnerabilities and attacks have plagued previous generations of communication systems;thus,physical layer security,especially against eavesdroppers,is vital,especially for upcoming 6G networks.In this regard,UAVs have appeared as a winning candidate to mitigate security risks.In this paper,we leverage UAVs to propose two methods.The first method utilizes a UAV as Decode-and-Forward(DF)relay,whereas the second method utilizes a UAV as a jammer to mitigate eavesdropping attacks for URLLC between transmitter and receiver devices.Moreover,we present a low-complexity algorithm that outlines the two aforementioned methods of mitigating interception,i.e.increasing secrecy rate,and we compare them with the benchmark null method in which there is a direct communication link between transmitter and receiver without the UAV DF relay.Additionally,simulation results show the effectiveness of such methods by improving the secrecy rate and its dependency on UAV height,blocklength,decoding error probability and transmitter-receiver separation distance.Lastly,we recommend the best method to enhance the secrecy rate in the presence of an eavesdropper based on our simulations.

Optimal Bidirectional LSTM for Modulation Signal Classification in Communication Systems

Modulation signal classification in communication systems can be considered a pattern recognition problem.Earlier works have focused on several feature extraction approaches such as fractal feature,signal constellation reconstruction,etc.The recent advent of deep learning(DL)models makes it possible to proficiently classify the modulation signals.In this view,this study designs a chaotic oppositional satin bowerbird optimization(COSBO)with bidirectional long term memory(BiLSTM)model for modulation signal classification in communication systems.The proposed COSBO-BiLSTM technique aims to classify the different kinds of digitally modulated signals.In addition,the fractal feature extraction process takes place by the use of Sevcik Fractal Dimension(SFD)approach.Moreover,the modulation signal classification process takes place using BiLSTM with fully convolutional network(BiLSTM-FCN).Furthermore,the optimal hyperparameter adjustment of the BiLSTM-FCN technique takes place by the use of COSBO algorithm.In order to ensure the enhanced classification performance of the COSBO-BiLSTM model,a wide range of simulations were carried out.The experimental results highlighted that the COSBO-BiLSTM technique has accomplished improved performance over the existing techniques.

Machine Learning-Based Channel State Estimators for 5G Wireless Communication Systems

For a 5G wireless communication system,a convolutional deep neural network(CNN)is employed to synthesize a robust channel state estimator(CSE).The proposed CSE extracts channel information from transmit-and-receive pairs through offline training to estimate the channel state information.Also,it utilizes pilots to offer more helpful information about the communication channel.The proposedCNN-CSE performance is compared with previously published results for Bidirectional/long short-term memory(BiLSTM/LSTM)NNs-based CSEs.The CNN-CSE achieves outstanding performance using sufficient pilots only and loses its functionality at limited pilots compared with BiLSTM and LSTM-based estimators.Using three different loss function-based classification layers and the Adam optimization algorithm,a comparative study was conducted to assess the performance of the presented DNNs-based CSEs.The BiLSTM-CSE outperforms LSTM,CNN,conventional least squares(LS),and minimum mean square error(MMSE)CSEs.In addition,the computational and learning time complexities for DNN-CSEs are provided.These estimators are promising for 5G and future communication systems because they can analyze large amounts of data,discover statistical dependencies,learn correlations between features,and generalize the gotten knowledge.

FUNDAMENTAL COMMUNICATIONS THEORIES AND SIGNAL PROCESSING TECHNIQUES FOR AMORPHOUS CELLULAR SYSTEMS

The rapid developing of the fourth generation(4G)wireless communications has aroused tremendous demands for high speed data transmission due to the dissemination of various types of the intelligent user terminals as well as the wireless multi-media services.It is predicted that the network throughput will increase

Design of a Multiband Patch Antenna for 5G Communication Systems

Currently, communication system requires multiband small antennas for 5G mobile applications. Driven this motivation, this paper proposes a multiband patch antenna for Wi-Fi, WiMAX and 5G applications. The proposed antenna can effectively operate at 2.4 GHz as Wi-Fi, 7.8 GHz as WiMAX and 33.5 GHz as 5G communication purposes. The proposed antenna arrays have given directional radiation patterns, very small voltage standing wave ratio, high gain (VSWR) and directivity for each aforementioned systems operating frequency. This antenna is made for multiband purpose which can be effective for not only Wi-Fi and WiMAX but also 5G applications.

Research Framework of B3G Mobile Communications Systems

Compared with the services in 3G, services in Beyond 3G (B3G) have some distinctive characteristics such as the packet data services being the majority, more service types, larger scale of services, higher peak transmission rate, enlarged range of transmission rates, more spatial and temporal distribution differences, and more service transmission requests occurring in fast moving vehicles. In order to meet the requirements of B3G services, the B3G systems must have great improvement in network architecture, air interface scheme, radio resource allocation strategy, frequency bands, and Radio Frequency (RF) technology etc. Therefore, the research of the B3G systems should focus on the theory of generalized cellular communications networks, theory of the Multiple Input Multiple Output (MIMO) wireless transmission system, matching of radio resources to new-type air interfaces, new iterative detection and adaptive link methods, and new-type antenna and RF technologies.

Security for Industrial Communication Systems

B. Remote Access to Stand-Alone Embedded Systems Industrial controllers, especially for power system and transportation applications, are often deployed as stand-alone systems in a geographically dispersed area. Maintenance and service costs of stand-alone embedded systems can be reduced when they can be

A New Compact Omni-Directional Quasi-Self-Complementary Antenna for Wireless Communication Systems

This article describes a new miniaturized omni-directional antenna with quasi-self-complementary structure for wireless communication applications. A novel ground structure composed of five rectangular plates is proposed to enhance the impedance bandwidth and reduce the antenna size. The proposed antenna is comprised of two patches surrounded by the ground structure. Two metal patches of the antenna are located on two opposite sides of the dielectric substrate. The feed patch is used to excite the radiation patch. This unique design is realized by properly choosing the suitable feed patch shape, selecting similar slot shape on the radiation patch, and tuning their dimensions. The proposed antenna with an extremely small size of 6 mm × 9 mm has an operating impedance bandwidth ranging from 4.5 to 6.1 GHz for S11 < -10 dB, which also covers the two IEEE 802.11a wireless local area network bands (5.15 - 5.35 GHz and 5.725 - 5.825 GHz). In addition to be very small in size, the antenna exhibits omni-directional radiation patterns in the entire operating bandwidth and low cross polarization. The distortionless time domain performance of the antenna is confirmed by investigation of the phase response and group delay. The obtained results in both frequency and time domain show that the proposed antenna is suitable for use in wireless communication systems.

Security for Industrial Communication Systems

B. Network Architectures This section describes the main types of industrial and utility communication network topologies and protocols, in preparation for the discussion of specific security issues in the later sections. Communication networks for industrial automation are typically built in hierarchi-