Frequency-modulated continuous-wave multiplexed gas sensingbased on optical frequency comb calibration

Laser absorption spectroscopy has proven to be an effective approach for gas sensing, which plays an important rolein the fields of military, industry, medicine and basic research. This paper presents a multiplexed gas sensing system basedon optical frequency comb (OFC) calibrated frequency-modulated continuous-wave (FMCW) tuning nonlinearity. Thesystem can be used for multi-parameter synchronous measurement of gas absorption spectrum and multiplexed opticalpath. Multi-channel parallel detection is realized by combining wavelength division multiplexing (WDM) and frequencydivision multiplexing (FDM) techniques. By introducing nonlinear optical crystals, broadband spectrum detection is simultaneouslyachieved over a bandwidth of hundreds of nanometers. An OFC with ultra-high frequency stability is used asthe frequency calibration source, which guarantees the measurement accuracy. The test samples involve H13C14N, C_(2)H_(2)and Rb vapor cells of varying densities and 5 parallel measurement experiments are designed. The results show that themeasurement accuracies of spectral absorption line and the optical path are 150 MHz and 20 m, respectively. The schemeoffers the advantages of multiplexed, multi-parameter, wide spectrum and high resolution detection, which can realize theidentification of multi-gas components and the high-precision inversion of absorption lines under different environments.The proposed sensor demonstrates great potential in the field of high-resolution absorption spectrum measurement for gassensing applications.

Continuous-wave optical enhancement cavity with 30-kW average power

Optical enhancement cavity(OEC)is a powerful tool for fundamental research and diagnostics.In this paper,the progress of a continuous-wave OEC to realize of megawatt cavity for a novel light source based on a steady-state microbunching(SSMB)mechanism,is reported.After efficiently suppressing all external noise and optimizing the alignment,mode-matching,and polarization matching,stable and long-term locking is achieved with the help of two feedback loops.The modal instability phenomenon caused by the surface thermoelastic deformation is observed.A pair of D-shape mirrors are utilized to remove the high-order modes.Finally,an intra-cavity average power of 30 kW is reached.

Single-photon frequency-modulated continuous-wave Lidar based on quantum compressed sensing

Frequency-modulated continuous-wave(FMCW)Lidar has the characteristics of high-ranging accuracy,noise immunity,and synchronous speed measurement,which makes it a candidate for the next generation of vehicle Lidar.In this work,an FMCW Lidar working at the single-photon level is demonstrated based on quantum compressed sensing,and the target distance is recovered from the sparse photon detection,in which the detection sensitivity,bandwidth,and compression ratio are improved significantly.Our Lidar system can achieve 3 GHz bandwidth detection at photon count rates of a few thousand,making ultra-long-distance FMCW Lidar possible.

High powerλ~8.5μm quantum cascade laser grown by MOCVD operating continuous-wave up to 408 K

Robust quantum cascade laser(QCL)enduring high temperature continuous-wave(CW)operation is of critical importance for some applications.We report on the realization of lattice-matched InGaAs/InAlAs/InP QCL materials grown by metal-organic chemical vapor deposition(MOCVD).High interface quality structures designed for light emission at 8.5μm are achieved by optimizing and precise controlling of growth conditions.A CW output power of 1.04 W at 288 K was obtained from a 4 mm-long and 10μm-wide coated laser.Corresponding maximum wall-plug efficiency and threshold current density were 7.1%and 1.18 kA/cm2,respectively.The device can operate in CW mode up to 408 K with an output power of 160 mW.

Continuous-wave mid-infrared intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate

This paper reports a continuous-wave （CW） mid-infrared intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate （PPLN） pumped by a diode-end-pumped CW Nd：YVO4 laser. Considering the thermal lens effects, it adopted an optical ballast lens and the near-concentric cavity for better operation. At the PPLN＇s grating period of 28.5 μm and the temperature of 140℃, the maximum idler output power of 155 mW at 3.86 μm has been achieved when the 808 nm pump power is 8.5 W, leading to an optical-to-optical conversion efficiency of 1.82%.

High efficiency continuous-wave tunable signal output of an intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate

In this paper we report on a continuous-wave （CW） intracavity singly resonant optical parametric oscillator （ICSRO） based on periodically poled LiNbO3 （PPLN） pumped by a diode-end-pumped CW Nd：YVO4 laser. Considering the thermal lens effects and diffraction loss, an optical ballast lens and a near-concentric cavity are adopted for better operation. Through varying the grating period and the temperature, the tunable signal output from 1406 nm to 1513 nm is obtained. At a PPLN grating period of 29 pm and a temperature of 413 K, a maximum signal output power of 820 mW at 1500 nm is achieved when the 808 nm pump power is 10.9 W, leading to an optical-to-optical conversion efficiency of 7.51%.

Continuous-wave operation of InAs/InP quantum dot tunable external-cavity laser grown by metal-organic chemical vapor deposition

We demonstrate high-performance broadband tunable external-cavity lasers(ECLs) with the metal-organic chemical vapor deposition(MOCVD) grown In As/In P quantum dots(QDs) structures. Without cavity facet coatings, the 3-d B spectral bandwidth of the Fabry–Perot(FP) laser is approximately 10.8 nm, while the tuning bandwidth of ECLs is 45 nm.Combined with the anti-reflection(AR)/high-reflection(HR) facet coating, a 92 nm bandwidth tuning range has been obtained with the wavelength covering from 1414 nm to 1506 nm. In most of the tuning range, the threshold current density is lower than 1.5 k A/cm2. The maximum output power of 6.5 m W was achieved under a 500 m A injection current.All achievements mentioned above were obtained under continuous-wave(CW) mode at room temperature(RT).

Design of a 162.5 MHz continuous-wave normal-conducting radiofrequency electron gun

A high-gradient radiofrequency(RF)gun operated in continuous-wave(CW)mode is required in various accelerating applications.Due to the high RF power loss,a traditional normal-conducting(NC)RF electron gun has difficulty meeting the requirement of generating a high-repetition-rate electron beam.The development of a scheme for a CW NC-RF gun is urgently required.Demonstrated as a photoinjector of a high-repetition-rate free-electron laser(FEL),an electron gun operated in CW mode and the VHF band is designed.An analysis of the reentrant gun cavity is presented in this paper to increase the gradient and decrease the power density and power dissipation.Referring to the analysis results,the design of a162.5 MHz gun cavity is optimized by a multi-objective evolutionary algorithm to achieve better performance in CW mode.Multipacting and thermal analyses are also deliberated in the design to coordinate with RF and mechanical design.The optimized 162.5 MHz gun cavity can be operated in CW mode to generate a high-repetition-rate beam with voltage up to 1 MV and gradient up to 32.75 MV/m at the cathode.

Generation of Continuous-Wave 194 nm Laser for Mercury Ion Optical Frequency Standard

A 194-nm cw laser is an essential part in the mercury ion optical frequency standard. We report the generation of over 2mW continuous-wave radiation at 194nm in a beta barium borate crystal using a simple sum frequency mixing （SFM） system. One source beams at 718nm is resonantly enhanced with a cavity and the other at 266mn makes a single pass. Considering the walk-off effect in SFM, the source beam waists are designed to be elliptical, thus the conversion efficiency can be promoted. The 266-nm beam produced by frequency doubling of 532-nm laser is shaped close to the diffraction limit to achieve better mode matching.

Low Power Consumption Distributed-Feedback Quantum Cascade Lasers Operating in Continuous-Wave Mode above 90℃ at λ～7.2μm

We report on the design and fabrication of λ-7.2μm distributed feedback quantum cascade lasers lot very high temperature cw operation and low electrical power consumption. The cw operation is reported above 90℃. For a 2-mm-long and 10-μm-wide laser coated with high-reflectivity on the rear facet, more than 170mW of output power is obtained at 20℃ with a threshold power consumption of 2.4 W, corresponding to 30mW with a threshold power consumption of 3.9 W at 90℃. Robust single-mode emission with a side-mode suppression ratio above 25 dB is continuously tunable by the heat sink temperature or injection current.

Continuous-Wave and Actively Q-Switched Diode-Pumped Er:LuAG Ring Laser at 1650 nm

We demonstrate a cw and actively Q-switched Er：LuAO laser resonantly dual-end-pumped by 1532nm fibre- coupled laser diodes. A maximum cw output power of 1.9W at 1650.3nm is obtained at a pump power of 25.5 W, corresponding to a slope efficiency of 43.3 %. In the Q-switched regime, the maximum pulse energy of 3.51 mJ is reached at a pulse repetition rate of 100 Hz, a pulse duration of 90.5ns and a pump power of 25.5 W. At the repetition rate of 400 Hz, the output energy is 2.12m J, corresponding to a pulse duration of 125.4 ns.

High-sensitivity methane monitoring based on quasi-fundamental mode matched continuous-wave cavity ring-down spectroscopy

Continuous-wave cavity ring-down spectroscopy(CW-CRDS)is an important technical means to monitor greenhouse gases in atmospheric environment.In this paper,a CW-CRDS system is built to meet the needs of atmospheric methane monitoring.The problem of mode matching is explained from the perspective of transverse mode and longitudinal mode,and the influence of laser injection efficiency on measurement precision is further analyzed.The results of cavity ring-down time measurement show that the measurement precision is higher when the laser is coupled with the fundamental mode.In the experiment,DFB laser is used to calibrate the system with standard methane concentration,and the measurement residual is less than±4×10^(-4)μs^(-1).The methane concentration in the air is monitored in real time for two days.The results show the consistency of the concentration changes over the two days,which further demonstrates the reliability of the system for the measurement of trace methane.By analyzing the influence of mode matching,it not only assists the adjustment of the optical path,but also further improves the sensitivity of the system measurement.

A kW Continuous-Wave Ytterbium-Doped All-Fiber Laser Oscillator with Domestic Fiber Components and Gain Fiber

We demonstrate a kW continuous-wave ytterbium-doped all-fiber laser oscillator with M1 domestic fiber compo- nents： a 7× I fused fiber bundle combiner, a fiber Bragg grating and a double-clad gain fiber. The oscillator operates at 1079.48nrn with 80.94% slope efficiency and shows no limit of temperature and nonlinear effects. These indicate that the passive fiber components and the gain fiber are all qualified for the high power environ- ment. No evidence of the signal power roll-over shows that this oscillator possesses the capacity to higher output with available pump power.

High-Power Continuous-Wave and Acousto-Optical Q-Switched Ho:(Sc_(0.5)Y_(0.5))_2SiO_5 Laser Pumped by Laser Diode

We experimentally investigate the continuous-wave(cw)and acousto-optical(AO)Q-switched performance of a diode-pumped Ho:(Sc_(0.5)Y_(0.5))_2SiO_5(Ho:SYSO)laser.A fiber-coupled laser diode at 1.91m is employed as the pump source.The cw Ho:SYSO laser produces 13.0 W output power at 2097.9 nm and 56.0%slope efficiency with respect to the absorbed pump power.In the AO Q-switched regime,at a pulse repetition frequency of 5 kHz,the Ho:SYSO laser yields 2.1 mJ pulse energy and 21 ns pulse width,resulting in a calculated peak power of 100 k W.In addition,at the maximum output level,the beam quality factor of the Q-switched Ho:SYSO laser is measured to be about 1.6.

Multi-wavelength continuous-wave Nd:YVO4 self-Raman laser under in-band pumping

Multi-wavelength continuous-wave self-Raman laser with an a-cut composite YVO4/Nd:YVO4/YVO4 crystal pumped by an 879-nm wavelength-locked laser diode is demonstrated for the first time.Multi-wavelength Raman lasers at 1168.4,1176,1178.7,and 1201.6 nm are achieved by the first Stokes shift of the multi-wavelength fundamental lasers at 1064,1066.7,1073.6,1084,and 1085.6 nm with two Raman shifts of 890 and 816 cm^-1.A maximum Raman output power of 2.56 W is achieved through the use of a 20-mm-long composite crystal,with a corresponding optical conversion efficiency of 9.8%.The polarization directions of different fundamental and Raman lasers are investigated and found to be orthogonalπandσpolarizations.These orthogonally polarized multi-wavelength lasers with small wavelength separation pave the way to the development of a potential laser source for application in spectral analysis,laser radar and THz generation.

Efficient continuous-wave eye-safe region signal output from intra-cavity singly resonant optical parametric oscillator

We report an efficient continuous-wave （CW） tunable intra-cavity singly resonant optical parametric oscillator based on the multi-period periodically poled lithium niobate and using a laser diode （LD） end-pumped CW 1064 nm Nd：YVO4 laser as the pump source. A highly efficiency CW operation is realized through a careful cavity design for mode matching and thermal stability. The signal tuning range is 1401 1500 nm obtained by varying the domain period. The maximum output power of 2.2 W at 1500 nm is obtained with a 17.1 W 808 nm LD power and the corresponding conversion efficiency is 12.9%.

MICRO-MOTION TARGET SENSING BY STEPPED-FREQUENCY CONTINUOUS-WAVE RADAR

Mechanical micro-vibration of a target may induce phase modulations on the radar echo,and the vibration can be detected to identify micro-motion target. In this paper,a new method to detect a micro-motion target and obtain its range and micro-motion frequency is proposed in which multiple periods stepped-frequency continuous-wave signal and Moving Target Indication (MTI) filter are adopted. The simulation results illustrate the validity of this method and present the detection of the target range and the vibration frequency. The experiment gives promising results.

Two-Photon Transitions of ^(85)Rb 5D_(5/2) State by Using an Optical Frequency Comb and a Continuous-Wave Laser

A high-resolution two-photon spectrum of 5S1/2 → 5P3/2 → 5D5/2 transitions in a thermal SSRb vapor cell is presented by using an optical frequency comb and a cw laser. The fluorescence of 6P3/2 → 5S1/2 spontaneous emission is detected when the cw laser frequency is scanned from the 5S1/2 ground state to 5P3/2 hyperfine levels and the optical frequency comb repetition rate is fixed. The hyperfine splittings （Ff = 2-5） of the 5D5/2 excited state are well resolved. The dependences of fluorescence intensities on the cw laser intensity and temperature of SSRb vapor eel1 are studied, respectively. The experimental results are in good agreement with the theoretical analyses.

High-Power Continuous-Wave Nd:GdVO4 Solid-State Laser Dual-End-Pumped at 880 nm

A high-power cw all-solid-state Nd：GdVO4 laser operating at 88Onto is reported. The laser consists of a low doped level Nd：GdV04 crystal dual-end-pumped by two high-power diode lasers and a compact negative confocM unstable-stable hybrid resonator. At an incident pump power of 820 W, a maximum cw output of 240 W at 1064nm is obtained. The optical-to-optical efficiency and Mope efficiency are 40.7% and 53.2%, respectively. The M2 factors in the unstable direction and in the stable direction are 4.38 and 5.44, respectively.

Calculation of left ventricular diastolic time constant(Tau) in dogs with aortic regurgitation using continuous-wave Doppler spectra

OBJECTIVE To investigate a new noninvasive method for calculating left ventricular diastolic time constant(Tau) through a continuous-wave aortic regurgitation Doppler spectrum.METHODS According to ultrasound guidance, twenty-four animal models(beagles) of aortic regurgitation and acute ischemic left ventricular diastolic dysfunction were created. The left ventricular diastolic function was manipulated with dobutamine or esmolol and fifty-nine hemodynamic stages were achieved. Raw audio signals of the continuous-wave Doppler spectra were collected, and new aortic regurgitation Doppler spectra were built after reprocessing by a personal computer. The updating time of the spectral line was 0.3 ms. The new Doppler spectra contour line was automated using MATLAB(MATrix LABoratory, MathWorks, Natick, MA, USA), and two time intervals,(t2–t1) and(t3–t1) were measured on the ascending branch of the aortic regurgitation Doppler spectrum. Then, the two time intervals were substituted into Bai's equations, and Doppler-derived Tau(Tau-D)was resolved and compared with catheter-derived Tau(Tau-c).RESULTS There is no significant difference between Tau-D and Tau-c(45.95 ± 16.90 ms and 46.81 ± 17.31 ms, respectively;P >0.05). Correlation analysis between Tau-c and Tau-D suggested a strong positive relationship(r = 0.97, P = 0.000). A Bland-Altman plot of Tau-c and Tau-D revealed fair agreement.CONCLUSIONS This new calculation method is simple, convenient, and shows a strong positive relationship and fair agreement with the catheter method.