Digital signal acquisition system for complex nuclear reaction experiments

A digital data-acquisition system based on XIA LLC products was used in a complex nuclear reaction experiment using radioactive ion beams.A flexible trigger system based on a field-programmable gate array(FPGA)parametrization was developed to adapt to different experimental sizes.A user-friendly interface was implemented,which allows converting script language expressions into FPGA internal control parameters.The proposed digital system can be combined with a conventional analog data acquisition system to provide more flexibility.The performance of the combined system was veri-fied using experimental data.

A fine acquisition algorithm based on fast three-time FRFT for dynamic and weak GNSS signals

As high-dynamics and weak-signal are of two primary concerns of navigation using Global Navigation Satellite System(GNSS)signals,an acquisition algorithm based on threetime fractional Fourier transform(FRFT)is presented to simplify the calculation effectively.Firstly,the correlation results similar to linear frequency modulated(LFM)signals are derived on the basis of the high dynamic GNSS signal model.Then,the principle of obtaining the optimum rotation angle is analyzed,which is measured by FRFT projection lengths with two selected rotation angles.Finally,Doppler shift,Doppler rate,and code phase are accurately estimated in a real-time and low signal to noise ratio(SNR)wireless communication system.The theoretical analysis and simulation results show that the fast FRFT algorithm can accurately estimate the high dynamic parameters by converting the traditional two-dimensional search process to only three times FRFT.While the acquisition performance is basically the same,the computational complexity and running time are greatly reduced,which is more conductive to practical application.

Reconstruction of sub cross-correlation cancellation technique for unambiguous acquisition of BOC(kn, n) signals

In order to solve the problem of ambiguous acquisition of BOC signals caused by its property of multiple peaks,an unambiguous acquisition algorithm named reconstruction of sub cross-correlation cancellation technique(RSCCT)for BOC(kn,n)signals is proposed.In this paper,the principle of signal decomposition is combined with the traditional acquisition algorithm structure,and then based on the method of reconstructing the correlation function.The method firstly gets the sub-pseudorandom noise(PRN)code by decomposing the local PRN code,then uses BOC(kn,n)and the sub-PRN code cross-correlation to get the sub cross-correlation function.Finally,the correlation peak with a single peak is obtained by reconstructing the sub cross-correlation function so that the ambiguities of BOC acquisition are removed.The simulation shows that RSCCT can completely eliminate the side peaks of BOC(kn,n)group signals while maintaining the narrow correlation of BOC,and its computational complexity is equivalent to sub carrier phase cancellation(SCPC)and autocorrelation side-peak cancellation technique(ASPeCT),and it reduces the computational complexity relative to BPSK-like.For BOC(n,n),the acquisition sensitivity of RSCCT is 3.25 dB,0.81 dB and 0.25 dB higher than binary phase shift keying(BPSK)-like,SCPC and ASPeCT at the acquisition probability of 90%,respectively.The peak to average power ratio is 1.91,3.0 and 3.7 times higher than ASPeCT,SCPC and BPSK-like at SNR=–20 dB,respectively.For BOC(2n,n),the acquisition sensitivity of RSCCT is 5.5 dB,1.25 dB and 2.69 dB higher than BPSK-like,SCPC and ASPeCT at the acquisition probability of 90%,respectively.The peak to average power ratio is 1.02,1.68 and 2.12 times higher than ASPeCT,SCPC and BPSK-like at SNR=–20 dB,respectively.

Efficient and Innovative Techniques for Collective Acquisition of Weak GNSS Signals

Navigation and positioning in harsh environments is still a great challenge for many applications. Collective Detection (CD) is a powerful approach for acquiring highly attenuated satellite signals in challenging environments, because of its capacity to process all visible satellites collectively taking advantage of the spatial correlation between GNSS signals as a vector acquisition scheme. CD combines the correlator outputs of satellite channels and projects them onto the position/clock bias domain in order to enhance the overall GNSS signal detection probability. In CD, the code phase search for all satellites in view is mapped into a receiver position/clock bias grid and the satellite signals are not acquired individually but collectively. In this concept, a priori knowledge of satellite ephemeris and reference location are provided to the user. Furthermore, CD addresses some of the inherent drawbacks of the conventional acquisition at the expenses of an increased computational cost. CD techniques are computationally intensive because of the significant number of candidate points in the position-time domain. The aim of this paper is to describe the operation of the CD approach incorporating new methods and architectures to address both the complexity and sensitivity problems. The first method consists of hybridizing the collective detection approach with some correlation techniques and coupling it with a better technique for Doppler frequency estimate. For that, a new scheme with less calculation load is proposed in order to accelerate the detection and location process. Then, high sensitivity acquisition techniques using long coherent integration and non-coherent integration are used in order to improve the performance of the CD algorithm.

Constant False Alarm Rate Acquisition Algorithm for Compass B1C Signal

In order to improve the sensitivity of the Compass B1C signal acquisition for the receiver,the principle of constant false alarm rate(CFAR)is applied for the B1C pilot channel acquisition to realize the dynamic adjustment of the threshold of acquisition against the carrier to noise ratio.The non-coherent data/pilot combined acquisition algorithm for B1C signal is analyzed to make full use of the power of the B1C signal under the condition of low carrier to noise ratio.On this basis,to improve the acquisition sensitivity of the receiver,the principle of constant false alarm probability is applied for the non-coherent data/pilot combined acquisition algorithm.Theoretical analysis and simulations show that the non-coherent data/pilot combined acquisition algorithm with CFAR improves the B1C signal acquisition sensitivity of the receiver significantly,and achieves a better Receiver Operating Characteristic compared with the traditional acquisition algorithms.

Impact of GPS Almanac Broadcast Strategy on the Signal Acquisition Time

This paper investigates the problem of almanac affecting the signal acquisition time with two constraints: different age of data and multi-sets of almanac. The contributions made in this paper include: 1) the exploiting of signal acquisition concept to extend well-known almanac function of predicting visible satellite and initializing signal acquisition to minimizing the signal acquisition time; 2) a model based on code phase and Doppler frequency to reflect the impact of multi-sets of almanac on the signal acquisition time; 3) the evaluation of the existing GPS almanac with different broadcast strategy. The theoretical analyses and simulations conducted on three sets of almanac show that the model proposed in this paper is general and efficient for almanac design and application.

Re-scaling and adaptive stochastic resonance as a tool for weak GNSS signal acquisition

Weak global navigation satellite system（GNSS） signal acquisition has been a limitation for high sensitivity GPS receivers. This paper modifies the traditional acquisition algorithms and proposes a new weak GNSS signal acquisition method using re-scaling and adaptive stochastic resonance（SR）. The adoption of classical SR is limited to low-frequency and periodic signals. Given that GNSS signal frequency is high and that the periodic feature of the GNSS signal is affected by the Doppler frequency shift, classical SR methods cannot be directly used to acquire GNSS signals. Therefore, the re-scaling technique is used in our study to expand its usage to high-frequency signals and adaptive control technique is used to gradually determine the Doppler shift effect in GNSS signal buried in strong noises. The effectiveness of our proposed method was verified by the simulations on GPS L1 signals. The simulation results indicate that the new algorithm based on SR can reach-181 d BW sensitivity with a very short data length of 1 ms.

Development of a wide-range and fast-response digitizing pulse signal acquisition and processing system for neutron flux monitoring on EAST

The neutron count rate fluctuation reaches six orders of magnitude between the ohmic plasma scenario and high power of auxiliary heating on an experimental advanced superconducting tokamak(EAST).The measurement result of neutron flux monitoring(NFM)is a significant feedback parameter related to the acquisition of radiation protection-related information and rapid fluctuations in neutron emission induced by plasma magnetohydrodynamic activity.Therefore,a wide range and high time resolution are required for the NFM system on EAST.To satisfy these requirements,a digital pulse signal acquisition and processing system with a wide dynamic range and fast response time was developed.The present study was conducted using a field-programmable gate array(FPGA)and peripheral component interconnect extension for instrument express(PXIe)platform.The digital dual measurement modes,which are composed of the pulse-counting mode and AC coupled square integral's Campbelling mode,were designed to expand the measurement range of the signal acquisition and processing system.The time resolution of the signal acquisition and processing system was improved from 10 to 1 ms owing to utilizing highspeed analog-to-digital converters(ADCs),a high-speed PXIe communication with a direct memory access(DMA)mode,and online data preprocessing technology of FPGA.The signal acquisition and processing system was tested experimentally in the EAST radiation field.The test results showed that the time resolution of NFM was improved to 1 ms,and the dynamic range of the neutron counts rate was expanded to more than 10^(6) counts per second.The Campbelling mode was calibrated using a multipoint average linear fitting method;subsequently,the fitting coefficient reached 0.9911.Therefore,the newly developed pulse signal acquisition and processing system ensures that the NFM system meets the requirements of high-parameter experiments conducted on EAST more effectively.

Two-step compressed acquisition method for Doppler frequency and Doppler rate estimation in high-dynamic and weak signal environments

To acquire global navigation satellite system(GNSS)signals means four-dimension acquisition of bit transition,Doppler frequency,Doppler rate,and code phase in high-dynamic and weak signal environments,which needs a high computational cost.To reduce the computations,this paper proposes a twostep compressed acquisition method(TCAM)for the post-correlation signal parameters estimation.Compared with the fast Fourier transform(FFT)based methods,TCAM uses fewer frequency search points.In this way,the proposed method reduces complex multiplications,and uses real multiplications instead of improving the accuracy of the Doppler frequency and the Doppler rate.Furthermore,the differential process between two adjacent milliseconds is used for avoiding the impact of bit transition and the Doppler frequency on the integration peak.The results demonstrate that due to the reduction of complex multiplications,the computational cost of TCAM is lower than that of the FFT based method under the same signal to noise ratio(SNR).

High Sensitivity Acquisition Algorithm for DSSS Signal with Data Modulation

In direct sequence spread spectrum communication both for satelliteto-ground and inter-satellite links, the system constrains due to radio frequency spectral occupation, channel data throughput and link performances in terms of data channel coding which might result in a signal structure where the symbol duration is shorter than the pseudo code period. This can generate some difficulties in the DSSS signal acquisition due to the polarity inversion caused by the data modulation. To eliminate the influence due to polarity inversion, this paper proposes a novel acquisition algorithm based on the simultaneous search of the code phase, data phase and Doppler frequency. In the proposed algorithm the data phase is predicted and the correlation period for the coherent integration can be set equal to the symbol duration. Then non-coherent accumulation over different symbol is implemented in order to enhance the acquisition algorithm sensitivity; the interval of non-coherent accumulation is the least common multiple between the symbol duration and the pseudo code period. The algorithm proposed can largely minimize the SNR loss caused by data polarity inversion and enhance acquisition performance without a noticeable increase in hardware complexity. Theoretical analysis, simulation and measured results verify the validity of the algorithm.

A new frequency domain search strategy in high sensitivity GPS signal acquisition circuit designing

The contradiction between the sensitivity and the frequency domain searching speed of GPS signal acquisition circuit has been discussed for a long time. The signal integration operation which enhances the sensitivity of the system also makes the frequency slots narrower, which affects the speed of the system. In this research a high sensitivity GPS signal acquisition circuit is implemented with a new frequency domain search strategy. The new strategy combines DDS sweep strategy with cyclic shifting sweep strategy which makes the TTFF (time to first fix) reduced evidently. The extra hardware resource cost of the new strategy is acceptable. The speed advantage of the new frequency domain search strategy has been verified by hardware comparison tests.

Fast Acquisition Method of GPS Signal Based on FFT Cyclic Correlation

Since the global positioning system began to operate, it has become more and more close to people’s lives, and has been applied to various fields now. In order to track and decode GPS signals, GPS signals need to be captured first. The necessary parameters of the captured GPS signal are immediately transmitted to the tracking process, and then the navigation message of the satellite can be obtained by tracking process. In this paper, the basic contents related to the signal structure of GPS system are briefly described. Then, the traditional GPS signal acquisition method based on time domain correlation method is introduced, and the GPS signal acquisition method based on FFT cyclic correlation method is discussed in this paper. By comparing the simulation results, two kinds of GPS signal acquisition methods are compared with the calculation time according to the method of controlling variables. For the two GPS signal acquisition methods, the variation of time delay error with SNR is simulated in this paper.

Acquisition of Weak Signals in Multi-Constellation Frequency Domain Receivers

New positioning applications’ availability requirements demand receivers with higher sensitivities and ability to process multiple GNSS signals. Possible applications include acquiring one signal per GNSS constellation in the same frequency band and combining them for increased sensitivity or predicting acquisition of other signals. Frequency domain processing can be used for this purpose, since it benefits from parallel processing capabilities of Fast Fourier Transform (FFT), which can be efficiently implemented in software receivers. On the other hand, long coherent integration times are mainly limited due to large FFT size in receivers using frequency domain techniques. A new method is proposed to address the problems in frequency domain receivers without compromising the resources and execution time. A pre-correlation accumulation (PCA) is proposed to partition the received samples into one-code-period blocks, and to sum them together. As a result, the noise is averaged out and the correlation results will gain more power, provided that the relative phase between the data segments is compensated for. In addition to simplicity, the proposed PCA method enables the use of one-size FFT for all integration times. A post-correlation peak combination is also proposed to remove the need for double buffering. The proposed methods are implemented in a configurable Simulink model, developed for acquiring recorded GNSS signals. For weak signal scenarios, a Spirent GPS simulator is used as a source. Acquisition results for GPS L1 C/A and GLONASS L1OF are shown and the performance of the proposed technique is discussed. The proposed techniques target GNSS receivers using frequency domain processing aiming at accommodating all the GNSS signals, while minimizing resource usage. They also apply to weak signal acquisition in frequency domain to answer the availability demand of today’s GNSS positioning applications.

An on-line data acquisition system of oscilloscope-embedded input/output controller for cavity BPM measurement

Cavity beam position monitor(BPM) is widely used in a precise electron beam position measurement. Based on high performance oscilloscope-embedded EPICS input/output controller,we developed an on-line cavity BPM signal processing system for fast data acquisition solution when designing a cavity BPM.Also,methods for extracting the position information from cavity pickup signals and calibration algorithm are included in this solution.

Continuous-Wave Interference Mitigation for Acquisition Method in Unified Carrier TT&C Systems

An interference mitigation for acquisition method,based on both energy center and spectrum symmetry detection,has been proposed as a possible solution to the problem of signal acquisition susceptibility to continuous-wave interference(CWI)in unified carrier telemetry,tracking,and command(TT&C)systems.With subcarrier modulation index as a priori condition,the existence of CWI is determined by comparing the energy center with the symmetric center.In the presence of interference,the interference frequency point is assumed and culled;sequentially,the spectral symmetry is used to verify whether the signal acquisition is realized.Theoretical analysis,simulations,and experimental results demonstrate that the method can realize the acquisition of the main carrier target signal with an interference-to-signal ratio of 31 dB,which represents an improvement over the existing continuous-wave interference mitigation for acquisition methods.

Research on full-period acquisition method for diesel engine based on self-adaptive correlation analysis

Full-period signal acquisition of vibration signal plays a vital role in the health monitoring and fault diagnosis of modern industrial equipment group. The traditional full-period signal acquisition methods usually need not only a reference signal generated from special key phase device but also a reserved position, which is only suitable for a small number of particular equipment. A novel full-period signal acquisition method without key phase is proposed to construct the time-frequency method with strong energy concentration called the synchrosqueezing generalized S-Transform(SGST), combining together the Teager energy operator(TEO) and self-adaptive correlation analysis(SACA) based on the vibration signals of both gear and cylinder head. Actual vibration signals of diesel engine are employed to verify the feasibility and effectiveness of the proposed method by comparing with traditional method with special key phase device. By comparisons, the results show that full-period signal acquisition method without key phase has approximate accuracy for diesel engine under different working conditions.

Image Acquisition Method Based on TMS320DM642

In order to achieve high-speed, real-time and accurate, an image acquisition method based on digital signal processor (DSP) TMS320DM642 is proposed for the paper currency image acquisition [1]. System will be high speed digital signal processing (DSP) technology and complex programmable logic device (CPLD) and CIS acquisition module combination, the structure of acquisition system is given and the time series analysis, during the process of collecting this kind of design has the advantages of simple implementation, high recognition rate [2].

基于小波变换的锚杆锚索测力仪设计

针对井下存在的电磁干扰,会对测力仪采集到的运放端的电压信号存在较大的干扰,进而对传感器测得的压力值准确性产生影响的问题;设计了基于小波变换的锚杆锚索测力仪。以国产HC32L176单片机作为主控芯片,对运放端的电压信号进行AD采集;选用合适的小波基函数、分解层数、阈值规则及阈值函数,对含噪信号进行分解,滤除不同层的高频成分,再对信号重构,得到去噪后的信号。Matlab仿真与实际测试结果表明:小波变换可以对采集的电压信号实现很好去噪,提高了锚杆锚索测力仪的可靠性与稳定性。