Optimization of Protein Removal Method and Condition of Polysaccharide from Phellinus Linteus

[Objective] The research aimed at optimizing protein removal method and condition of polysaccharide extracts from Phellinus Linteus and comparing the effects of two methods on protein removal.[Method] Free proteins in polysaccharide from Phellinus Linteus were removed using Sevag method and TCA method.[Result] The TCA method was better than Sevag method,and the optimum protein removal condition was treated with 5% TCA for 30 min and for three times,under that condition,the protein removal rate attained 82% while the polysaccharide loss rate was only 10.8%.[Conclusion] The TCA method was a better way to remove proteins of polysaccharide from Phellinus Linteus.

MODIFIED LAYER REMOVAL METHOD FOR MEASUREMENT OF RESIDUAL STRESS DISTRIBUTION IN THICK PRE-STRETCHED ALUMINUM PLATE

The integrated structure parts are widely used in aircraft. The distortion caused by residual stresses in thick pre-stretched aluminum plates during machining integrated parts is a common and serious problem. To predict and control the machining distortion, the residual stress distribution in the thick plate must be measured firstly. The modified removal method for measuring residual stress in thick pre-stretched aluminum plates is proposed and the stress-strain relation matrix is deduced by elasticity theory. The residual stress distribution in specimen of 7050T7451 plate is measured by using the method, and measurement results are analyzed and compared with data obtained by other methods. The method is effective to measure the residual stress.

A new two-step variational model for multiplicative noise removal with applications to texture images

Multiplicative noise removal problems have attracted much attention in recent years.Unlike additive noise,multiplicative noise destroys almost all information of the original image,especially for texture images.Motivated by the TV-Stokes model,we propose a new two-step variational model to denoise the texture images corrupted by multiplicative noise with a good geometry explanation in this paper.In the first step,we convert the multiplicative denoising problem into an additive one by the logarithm transform and propagate the isophote directions in the tangential field smoothing.Once the isophote directions are constructed,an image is restored to fit the constructed directions in the second step.The existence and uniqueness of the solution to the variational problems are proved.In these two steps,we use the gradient descent method and construct finite difference schemes to solve the problems.Especially,the augmented Lagrangian method and the fast Fourier transform are adopted to accelerate the calculation.Experimental results show that the proposed model can remove the multiplicative noise efficiently and protect the texture well.

MIBK Removal from Aqueous Solution by Aeration method

In order to develop an effective MIBK removal method of H 2TaF 7 solution in tantalum extraction process, MIBK removal from aqueous solution by the aeration method was investigated by using an aeration column with the dimensions of 78 mm in inner diameter and 1 100 mm in length. The effects of aeration conditions on aerating efficiency were investigated in the ranges of temperature 303 333 K, airflow rate 50 300 L/h,volume of solution 1 600 3 200 mL. Aerating efficiency increases with the increase of temperature and airflow rate. MIBK in aqueous solution can be removed from 0.058 mol/L to 0.002 mol/L at 50 ℃,airflow rate 200 L/h, volume of solution 2 400 mL and aeration time 1h. The experimental results show that MIBK can be removed effectively from aqueous solution by the aeration method.

Effects of Planting Methods on Root Yield and Nutrient Removal of Five Cassava Cultivars Planted in Late Rainy Season in Northeastern Thailand

The objectives of this study were to evaluate growth, yield and nutrients removal of five cassava cultivars planted by different planting methods in late rainy season of northeastern Thailand. A split plot design was used in this study. The planting methods (vertical and horizontal) were assigned as main-plots. Cassava cultivars (Rayong-7, Rayong-11, Rayong-72, Huaybong-80 and E-dum) were assigned as sub-plots with four replications. Results showed that vertical planting gave significantly higher fresh storage root yield than those of horizontal planting, across five cassava cultivars. The cultivar Rayong-7 produced maximum fresh storage root yield across two planting methods, but not significantly different from Rayong 11, Huaybong 80 and Edum cultivars. Irrespective of nutrient removal, N, P and K removed ranges from 2.9 - 3.6, 0.8 - 1.3 and 5.3 - 7.9 kg per ton fresh root weight, respectively depending on cassava cultivar. The cultivar Rayong-7 removed the highest quantities of N, and the cultivar Rayong-11 removed maximum of P and K in the present study. Regardless of nutrient removal at different plant parts;N, P and K removed maximum quantities in leaf, stem and storage root, respectively. Planting method had no significant effect on N and P removal, but significant effect on K removal. The vertical planting removed K higher than those of horizontal planting.

Influence Factors of Phosphorus Removal by Chemical Method in Sewage Treatment System

[Objective] The research aimed to study influence factors of phosphorus removal by chemical method in sewage treatment system. [ Method] In different reaction systems, removal effect of the phosphorus in sewage by dosing lime and influence of the constraint factor were stud- ied. [ Result] Lime precipitation method treating high-concentration phosphorus wastewater could not only decline cost of phosphorus removal by chemical method, but also reach better treatment effect under suitable stirring and precipitation conditions by controlling alkalinity and pH. Phosphor- us content of chemical sludge after treatment could reach 9% -12%, with higher recyclable value. E Conclusion] Lime method treating phosphorus- rich sewage was more economic than low-concentration phosphorus sewage, and had very great potential for recycling phosphorus.

Efficient Extraction and Isolation of Mangiferin from Mango Leaves by Ethyl Acetate Impurity Removal Method

[Objectives] To optimize the ethyl acetate impurity removal method for extracting and isolating mangiferin from mango leaves,and provide raw materials and technical support for development and use of mangiferin related products. [Methods]Five steps( material crushing→ ethyl acetate impurity removing → concentrated extract washing → extracting with methanol → crystallization and precipitation) were used.The single factor experiment and L9( 34) orthogonal experiment was carried out to optimize the process parameters including extraction time,ultrasonic power,extraction times,and extraction temperature.[Results] The optimum process of ethyl acetate impurity removal method for extracting and isolating mangiferin from mango leaves was as follows: the mango leaves were crushed and sieved; 3 m L/g of ethyl acetate was added,sealed and soaked for 4 h,ultrasonically shaken for 20 min( 50℃,350 W),filtered at room temperature,filtered with 100 mesh sieve,and extracted three times; added 100% methanol to the residue at 3 m L/g,extract by ultrasonic vibration for 20 min( 350 W,55℃)for four times,filtered with 100 mesh sieve when it was still hot; mixed the extract of each time,condensed by vacuum decompression to get the extract; added 100% methanol at 4 m L/g,mixed and washed for 5 min at room temperature,placed for 10 min,filtered with 100 mesh sieve,washed 3 times repeatedly,and dried the filter residue at 60℃ to obtain the crude mangiferin; added 100% methanol at 4 m L/g,mixed and washed at 50℃ for 5 min,placed at 6℃ for 8 h,dried the filter residue at 60℃,and repeatedly crystallized two times. According to the above process,crude and pure mangiferin products could be obtained,the purity of mangiferin of the crude product was higher than 64. 00%,the total recovery rate was 83. 90%,and the purity of mangiferin of the pure product was higher than 98. 00%,and the total recovery rate was about 66. 40%. [Conclusions] The optimized ethyl acetate impurity removal method is easy in operation,low in cost,and high in efficiency for extracting and isolating mangiferin,and can be applied for actual production of mangiferin.

Calculation Method of Passive Residual Heat Removal Heat Exchanger and Numerical Simulation

The tube inside and outside heat transfer mechanism of Passive Residual Heat Removal Heat Exchanger (PRHR HX) was analyzed. The calculation method of this special heat exchanger under natural convection condition in In-containment Refueling Water Storage Tank (IRWST) was carried out. The single-tube coupling model three-dimensional natural circulation in the IRWST was simulated numerically using Fluent. The heat transfer and flow characteristics of the fluid in IRWST were obtained. The comparison of the results between theoretical arithmetic and numerical simulation showed that the theoretical calculation method is suitable for the heat transfer calculation of PRHR HX.

Initial residual stress experiment and simulation of thin-walled parts for layer removal method

Thin-walled parts have low stiffness characteristic. Initial residual stress of thin-walled blanks is an important influence factor on machining stability. The present work is to verify the feasibility of an initial residual stress measurement of layer removal method. According to initial residual stress experiment for casting ZL205 A aluminum alloy tapered thin-walled blank by a common method,namely hole-drilling method,three finite element models with initial residual stress are established to simulate the layer removal method in ABAQUS and ANSYS software. By analyzing the results of simulation and experiments,the cutting residual stress inlayer removal process has a significant effect on measurement results. Reducing cutting residual stress is helpful to improve accuracy of layer removal method.

Amended influence matrix method for removal of rigid motion in the interior BVP for plane elasticity

A conventional complex variable boundary integral equation （CVBIE） in plane elasticity is provided. After using the Somigliana identity between a particular fundamental stress field and a physical stress field, an additional integral equality is obtained. By adding both sides of this integral equality to both sides of the conventional CVBIE, the amended boundary integral equation （BIE） is obtained. The method based on the discretization of the amended BIE is called the amended influence matrix method. With this method, for the Neumann boundary value problem （BVP） of an interior region, a unique solution for the displacement can be obtained. Several numerical examples are provided to prove the efficiency of the suggested method.

A New Shadow Removal Method for Color Images

Shadow and variable illumination considerably influence the results of image understanding such as image segmentation, object tracking, and object recognition. The intrinsic image decomposition is to separate the reflectance and the illumination image from an observed image. The intrinsic image decomposition is very useful to remove shadows and then improve the performance of image understanding. In this paper, we present a new shadow removal method based on intrinsic image decomposition on a single color image using the Fisher Linear Discriminant (FLD). Under the assumptions-Lambertian surfaces, approximately Planckian lighting, and narrowband camera sensors, there exist an invariant image, which is 1-dimensional greyscale and independent of illuminant color and intensity. The Fisher Linear Discriminant is applied to create the invariant image. And further the shadows can be removed through the difference between invariant image and original color image. The experimental results on real data show good performance of this algorithm.

Modified Layer-Removal Method for Measurement of Residual Stress in Pre-stretched Aluminium Alloy Plate

Residual stress is one of the factors affecting the machining deformation of monolithic structure parts in the aviation industry. Thus, the studies on machining deformation rules induced by residual stresses largely depend on correctly and efficiently measuring the residual stresses of workpieccs. A modified layer-removal method is proposed to measure residual stress by analysing the characteristics of a traditional, layer-removal method. The coefficients of strain release are then deduced according to the simulation results using the finite element method （FEM）. Moreover, the residual stress in a 7075T651 aluminium alloy plate is measured using the proposed method, and the results are then analyzed and compared with the data obtained by the traditional methods. The analysis indicates that the modified layer-removal method is effective and practical for measuring the residual stress distribution in pre-stretched aluminium alloy plates.

The anti-correlation method for removing harmonic distortion in vibroseis slip-sweep data

The slip-sweep technique is one of the high-efficiency, high-fidelity, and environmental vibroseis seismic prospecting techniques which consists of a vibrator group sweeping without waiting for the previous group＇s sweep to terminate. The cycle time can be reduced drastically and hence the production efficiency can be increased significantly but harmonic distortion of one sweep will leak into the record of the other sweep. In this paper, we propose an anti-correlation method for removing harmonic distortion in vibroseis data. This method is based on decomposition of the ground force signal into fundamental and harmonic components. Then the corresponding anti-correlation operator can be computed to estimate the energy of each harmonic after correlating the vibroseis data with the corresponding harmonic component. Finally, the vibroseis harmonic noise to be removed can be obtained by subtracting the extracted harmonic noise from the traces of the previous group＇s sweep. The advantage of the proposed method is that it can process both uncorrelated and correlated vibroseis seismic data. Moreover, the algorithm is simple, stable, and computationally fast. Especially, the significant contribution of this method is a considerable reduction in the harmonic without any alteration of the desired signals. The method was tested on both synthetic and field data sets to validate the good harmonic noise suppression results.

Synthesis of platy potassium magnesium titanate and its application in removal of copper ions from aqueous solution

Platy potassium magnesium titanate (K0.8Mg0.4Ti1.6O4, KMTO) was synthesized by a flux method. The potential application of KMTO in removing copper ions from water pollutants was investigated. The crystal phases of specimens were identified by XRD. The morphology and structural information were characterized by SEM and TEM. The adsorption behavior under different conditions was investigated, including different pH values and different initial copper ion concentrations. The results show that the maximum adsorption capacity of Cu(II) ions is 290.697 mg/g, and almost 99.9% of Cu(II) ions can be removed, which is much higher than that of other sorbents reported. The kinetics of KMTO for the adsorption of Cu(II)ions was studied and the best fit can be obtained by the pseudo-second-order model. Adsorption isothermal data can be well interpreted by the Freundlich equation (R2=0.991). In conclusion, this study highlights that KMTO is a potential material for the efficient removal of heavy metal ions in polluted water. It also opens up a new opportunity for the applications of platy KMTO.

Optimal design for buckets layout based on muck removal analysis of TBM cutterhead

The layout of the buckets for tunnel boring machine(TBM)directly affects the muck removal efficiency of cutterhead during excavation.In order to improve the muck removal performance for TBM,the optimal design of bucket layout was investigated.The whole muck transfer process was simulated by discrete-element method(DEM),including the muck falling,colliding,pilling up,shoveling and transferring into the hopper.The muck model was established based on size distribution analysis of muck samples from the water-supply tunnel project in Jilin Province,China.Then,the influence of the bucket number and the interval angle between buckets on muck removal performance was investigated.The results indicated that,as the number of buckets increased from four to eight,the removed muck increased by 29%and the residual volume decreased by 40.5%,and the process became steadier.Different interval angles between buckets were corresponding to different removed muck irregularly,but the residual muck number increased generally with the angles.The optimal layout of buckets for the cutterhead in this tunnel project was obtained based on the simulation results,and the muck removal performance of the TBM was verified by the actual data in the engineering construction.

Cutting-Edge Space Exploration Technology Maturity Level Facilitation with Support of Space Debris Removal Missions

Considering current space debris situation in outer space environment,different methods for debris removal missions are proposed.In addition,advanced technologies are needed to be demonstrated for future human space exploration programs.The main issue regarding to these missions is high mission cost for both debris removal missions and space environmental tests to achieve high maturity level for new space-usable technologies.Since,these missions are unavoidable for future of human space activities,a solution which can tackle these challenges is necessary.This paper will address to an idea which has the possibility to give a solution for facilitating technology readiness level(TRL)maturity tests by debris removal mission platform consideration.

A statistical inference for generalized Rayleigh model under Type-Ⅱ progressive censoring with binomial removals

This paper considers the parameters and reliability characteristics estimation problem of the generalized Rayleigh distribution under progressively Type-Ⅱ censoring with random removals,that is,the number of units removed at each failure time follows the binomial distribution.The maximum likelihood estimation and the Bayesian estimation are derived.In the meanwhile,through a great quantity of Monte Carlo simulation experiments we have studied different hyperparameters as well as symmetric and asymmetric loss functions in the Bayesian estimation procedure.A real industrial case is presented to justify and illustrate the proposed methods.We also investigate the expected experimentation time and discuss the influence of the parameters on the termination point to complete the censoring test.

New methods to remove baseline drift in trapezoidal pulse shaping

Trapezoidal pulse shaping algorithm is widely applied to improve signal-to-noise ratio(SNR), throughput and energy resolution with the properties of noise suppression, pile-up pulse separation and ballistic deficit correction. The algorithm can be acquired by z transform method which is easier for derivation. However, the baseline drift of trapezoidal pulse appears because the noise superimposes on the input signal. In this paper,two new methods based on convergence analysis and noise suppression are proposed to remove the baseline drift resulting from trapezoidal pulse shaping. Simulations and experimental tests are carried out to verify the methods. The results demonstrate that the proposed methods can remove baseline drift in trapezoidal pulse shaping.

High efficiency of heavy metal removal in mine water by limestone

The removal of Cd, Cu, Ni and Zn from dilute mine water by using several geological materials including pure limestone, sand, carbonaceous limestone and brecciated limestone was performed on a laboratory scale. The results showed that to add geological materials in combination with sodium carbonate injection would notably enhance the efficiency of heavy metal removal to varying degrees. Pure limestone was found the best one among the four materials mentioned above for removing heavy metals from mine water. The removal efficiencies of pure limestone when it is ground as fine as 30–60 meshes are 58.6% for Cd, 100% for Cu, 47.8% for Ni, and 36.8% for Zn at 20℃. The optimum pH is about 8.9 to 9.1. The mechanism of higher effective removal, perhaps, is primarily due to co-precipitation under the control of calcite-related pH value. According to this research, Na2CO3 injection manners, including slug dosing and drip-wise, seemed to have little impact on the efficiency of heavy metal removal.

Study on Inclusion Removal Efficiency of Runner

A two-phase fluid hydrodynamic method is used to investigate the inclusion re-moval ability of a runner system,and a mathematical formula is established from theresults to quantify the percentage by volume of the slag content captured by the runnerfrom the liquid metal.