This paper investigates a wireless powered and backscattering enabled sensor network based on the non-linear energy harvesting model, where the power beacon(PB) delivers energy signals to wireless sensors to enable th...This paper investigates a wireless powered and backscattering enabled sensor network based on the non-linear energy harvesting model, where the power beacon(PB) delivers energy signals to wireless sensors to enable their passive backscattering and active transmission to the access point(AP). We propose an efficient time scheduling scheme for network performance enhancement, based on which each sensor can always harvest energy from the PB over the entire block except its time slots allocated for passive and active information delivery. Considering the PB and wireless sensors are from two selfish service providers, we use the Stackelberg game to model the energy interaction among them. To address the non-convexity of the leader-level problem, we propose to decompose the original problem into two subproblems and solve them iteratively in an alternating manner. Specifically, the successive convex approximation, semi-definite relaxation(SDR) and variable substitution techniques are applied to find a nearoptimal solution. To evaluate the performance loss caused by the interaction between two providers, we further investigate the social welfare maximization problem. Numerical results demonstrate that compared to the benchmark schemes, the proposed scheme can achieve up to 35.4% and 38.7% utility gain for the leader and the follower, respectively.展开更多
The Backscatter communication has gained widespread attention from academia and industry in recent years. In this paper, A method of resource allocation and trajectory optimization is proposed for UAV-assisted backsca...The Backscatter communication has gained widespread attention from academia and industry in recent years. In this paper, A method of resource allocation and trajectory optimization is proposed for UAV-assisted backscatter communication based on user trajectory. This paper will establish an optimization problem of jointly optimizing the UAV trajectories, UAV transmission power and BD scheduling based on the large-scale channel state signals estimated in advance of the known user trajectories, taking into account the constraints of BD data and working energy consumption, to maximize the energy efficiency of the system. The problem is a non-convex optimization problem in fractional form, and there is nonlinear coupling between optimization variables.An iterative algorithm is proposed based on Dinkelbach algorithm, block coordinate descent method and continuous convex optimization technology. First, the objective function is converted into a non-fractional programming problem based on Dinkelbach method,and then the block coordinate descent method is used to decompose the original complex problem into three independent sub-problems. Finally, the successive convex approximation method is used to solve the trajectory optimization sub-problem. The simulation results show that the proposed scheme and algorithm have obvious energy efficiency gains compared with the comparison scheme.展开更多
The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant ...The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.展开更多
Networks based on backscatter communication provide wireless data transmission in the absence of a power source.A backscatter device receives a radio frequency(RF)source and creates a backscattered signal that deliver...Networks based on backscatter communication provide wireless data transmission in the absence of a power source.A backscatter device receives a radio frequency(RF)source and creates a backscattered signal that delivers data;this enables new services in battery-less domains with massive Internet-of-Things(IoT)devices.Connectivity is highly energy-efficient in the context of massive IoT applications.Outdoors,long-range(LoRa)backscattering facilitates large IoT services.A backscatter network guarantees timeslot-and contention-based transmission.Timeslot-based transmission ensures data transmission,but is not scalable to different numbers of transmission devices.If contention-based transmission is used,collisions are unavoidable.To reduce collisions and increase transmission efficiency,the number of devices transmitting data must be controlled.To control device activation,the RF source range can be modulated by adjusting the RF source power during LoRa backscatter.This reduces the number of transmitting devices,and thus collisions and retransmission,thereby improving transmission efficiency.We performed extensive simulations to evaluate the performance of our method.展开更多
In wireless communications, the Ambient Backscatter Communication (AmBC) technique is a promisingapproach, detecting user presence accurately at low power levels. At low power or a low Signal-to-Noise Ratio(SNR), ther...In wireless communications, the Ambient Backscatter Communication (AmBC) technique is a promisingapproach, detecting user presence accurately at low power levels. At low power or a low Signal-to-Noise Ratio(SNR), there is no dedicated power for the users. Instead, they can transmit information by reflecting the ambientRadio Frequency (RF) signals in the spectrum. Therefore, it is essential to detect user presence in the spectrum forthe transmission of data without loss or without collision at a specific time. In this paper, the authors proposed anovel Spectrum Sensing (SS) detection technique in the Cognitive Radio (CR) spectrum, by developing the AmBC.Novel Matched Filter Detection with Inverse covariance (MFDI), Cyclostationary Feature Detection with Inversecovariance (CFDI) and Hybrid Filter Detection with Inverse covariance (HFDI) approaches are used with AmBCto detect the presence of users at low power levels. The performance of the three detection techniques is measuredusing the parameters of Probability of Detection (PD), Probability of False Alarms (Pfa), Probability of MissedDetection (Pmd), sensing time and throughput at low power or low SNR. The results show that there is a significantimprovement via the HFDI technique for all the parameters.展开更多
Non-Orthogonal Multiple Access(NOMA)has emerged as a novel air interface technology for massive connectivity in Sixth-Generation(6G)era.The recent integration of NOMA in Backscatter Communication(BC)has triggered sign...Non-Orthogonal Multiple Access(NOMA)has emerged as a novel air interface technology for massive connectivity in Sixth-Generation(6G)era.The recent integration of NOMA in Backscatter Communication(BC)has triggered significant research interest due to its applications in low-powered Internet of Things(IoT)networks.However,the link security aspect of these networks has not been well investigated.This article provides a new optimization framework for improving the physical layer security of the NOMA ambient BC system.Our system model takes into account the simultaneous operation of NOMA IoT users and the Backscatter Node(BN)in the presence of multiple EavesDroppers(EDs).The EDs in the surrounding area can overhear the communication of Base Station(BS)and BN due to the wireless broadcast transmission.Thus,the chief aim is to enhance link security by optimizing the BN reflection coefficient and BS transmit power.To gauge the performance of the proposed scheme,we also present the suboptimal NOMA and conventional orthogonal multiple access as benchmark schemes.Monte Carlo simulation results demonstrate the superiority of the NOMA BC scheme over the pure NOMA scheme without the BC and conventional orthogonal multiple access schemes in terms of system secrecy rate.展开更多
Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rou...Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rough surface are applied to the investigation of microwave backscattering of breaking waves driven by strong wind. The shapes of seawater droplets are considered by calculating the effective dielectric constant of the whitecap layer. The responses of seawater droplets shapes, such as sphere and ellipsoid, to the backscattering coefficient are discussed. Numerical results of the models are in good agreement with the experimental measurements of horizontally and vertically polarized backscattering at microwave frequency 13.9GHz and different incidence angles.展开更多
Internet of Things (IoT) has attracted extensive interest from both academia and industries, and is recognized as an ultimate infrastructure to connect everything at anytime and anywhere. The implementation of IoT gen...Internet of Things (IoT) has attracted extensive interest from both academia and industries, and is recognized as an ultimate infrastructure to connect everything at anytime and anywhere. The implementation of IoT generally faces the challenges from energy constraint and implementation cost. In this paper, we will introduce a new green communication paradigm, the ambient backscatter (AmBC), that could utilize the environmental wireless signals for both powering a tiny-cost device and backscattering the information symbols. Specifically, we will present the basic principles of AmBC, analyze its features and advantages, suggest its open problems, and predict its potential applications for our future IoT.展开更多
In this paper, the orange peel defect in the surface range of the st14 steel sheet has been investigated using the electron backscattered diffraction (EBSD) technique. It has been found that the orange peel defect in ...In this paper, the orange peel defect in the surface range of the st14 steel sheet has been investigated using the electron backscattered diffraction (EBSD) technique. It has been found that the orange peel defect in the st14 steel sheet was resulted from the local coarse grains which were produced during hot-rolling due to the critical deformation in dual-phase zone. During deep drawing, the coarse grains with {100}<001> microtexture can slip on the {112}<111> slip system to form bulging and yields orange peel defects, while the coarse grains with {112}<110> orientation do not form the defect as the Schmid factor of {112}<111> slip system in it equals zero.展开更多
An analysis of the radar backscattering from the ocean surface covered by oil spill is presented using a mi- crowave scattering model and Monte-Carlo simulation. In the analysis, a one-dimensional rough sea sur- face ...An analysis of the radar backscattering from the ocean surface covered by oil spill is presented using a mi- crowave scattering model and Monte-Carlo simulation. In the analysis, a one-dimensional rough sea sur- face is numerically generated with an ocean waveheight spectrum for a given wind velocity. A two-layered medium is then generated by adding a thin oil layer on the simulated rough sea surface. The electric fields backscattered from the sea surface with two-layered medium are computed with the method of moments (MoM), and the backscattering coefficients are statistically obtained with N independent samples for each oil-spilled surface using the Monte-Carlo technique for various conditions of surface roughness, oil-layer thickness, frequency, polarization and incidence angle. The numerical simulation results are compared with theoretical models for clean sea surfaces and SAR images of an off-spilled sea surface caused by the Hebei (Hebei province, China) Spirit oil tanker in 2007. Further, conditions for better oil spill extraction are sought by the numerical simulation on the effects of wind speed and oil-layer thickness at different inci- dence angles on the backscattering coefficients.展开更多
We present a coaxial detection of the backscattered electrons in SEM. The lens-aperture has been used to filter in energy and focus the backscattered electrons. This particular geometry allows us to eliminate the low ...We present a coaxial detection of the backscattered electrons in SEM. The lens-aperture has been used to filter in energy and focus the backscattered electrons. This particular geometry allows us to eliminate the low energy backscattered electrons and collect the backscattered electrons, which are backscattered close to the incident beam orientation. The main advantage of this geometry is adapted to topographic contrast attenuation and atomic number contrast enhancement. Thus this new SEM is very suitable to analyze the material composition.展开更多
The goal of this study is to analyze the statistics of the backscatter signal from bovine cancellous bone using a Nakagami model and to evaluate the feasibility of Nakagami-model parameters for cancellous bone charact...The goal of this study is to analyze the statistics of the backscatter signal from bovine cancellous bone using a Nakagami model and to evaluate the feasibility of Nakagami-model parameters for cancellous bone characterization. Ultrasonic backscatter measurements were performed on 24 bovine cancellous bone specimens in vitro and the backscatter signals were compensated for the frequency-dependent attenuation prior to the envelope detection. The statistics of the backscatter envelope were modeled using the Nakagami distribution. Our results reveal that the backscatter envelope mainly followed pre-Rayleigh distributions, and the deviations of the backscatter envelope from Rayleigh distribution decreased with increasing bone density. The Nakagami shape parameter(i.e., m) was significantly correlated with bone densities(R = 0.78–0.81, p < 0.001) and trabecular microstructures(|R| = 0.46–0.78, p < 0.05). The scale parameter(i.e.,?) and signal-to-noise ratio(SNR) also yielded significant correlations with bone density and structural features. Multiple linear regressions showed that bone volume fraction(BV/TV) was the main predictor of the Nakagami parameters,and microstructure produced significantly independent contribution to the prediction of Nakagami distribution parameters,explaining an additional 10.2% of the variance at most. The in vitro study showed that statistical parameters derived with Nakagami model might be useful for cancellous bone characterization, and statistical analysis has potential for ultrasonic backscatter bone evaluation.展开更多
The Al-Si-Mg alloy which can be strengthened by heat treatment is widely applied to the key components of aerospace and aeronautics. Iron-rich intermetallic compounds are well known to be strongly influential on mecha...The Al-Si-Mg alloy which can be strengthened by heat treatment is widely applied to the key components of aerospace and aeronautics. Iron-rich intermetallic compounds are well known to be strongly influential on mechanical properties in Al-Si-Mg alloys. But intermetallic compounds in cast Al-Si-Mg alloy intermetallics are often misidentified in previous metallurgical studies. It was described as many different compounds, such as AlFeSi, Al8Fe2Si, Al5(Fe, Mn)3Si2 and so on. For the purpose of solving this problem, the intermetallic compounds in cast Al-Si alloys containing 0.5% Mg were investigated in this study. The iron-rich compounds in Al-Si-Mg casting alloys were characterized by optical microscope(OM), scanning electron microscope(SEM), energy dispersive X-ray spectrometer(EDS), electron backscatter diffraction(EBSD) and X-ray powder diffraction(XRD). The electron backscatter diffraction patterns were used to assess the crystallographic characteristics of intermetallic compounds. The compound which contains Fe/Mg-rich particles with coarse morphologies was Al8FeMg3Si6 in the alloy by using EBSD. The compound belongs to hexagonal system, space group P6_2m, with the lattice parameter a=0.662 nm, c=0.792 nm. The β-phase is indexed as tetragonal Al3FeSi2, space group I4/mcm, a=0.607 nm and c=0.950 nm. The XRD data indicate that Al8FeMg3Si6 and Al3FeSi2 are present in the microstructure of Al-7Si-Mg alloy, which confirms the identification result of EBSD. The present study identified the iron-rich compound in Al-Si-Mg alloy, which provides a reliable method to identify the intermetallic compounds in short time in Al-Si-Mg alloy. Study results are helpful for identification of complex compounds in alloys.展开更多
A new parallel Monte Carlo simulation method of secondary electron (SE) and back scattered electron images (BSE) of scanning electron microscopy (SEM) for a com plex geometric structure has been developed. This paper ...A new parallel Monte Carlo simulation method of secondary electron (SE) and back scattered electron images (BSE) of scanning electron microscopy (SEM) for a com plex geometric structure has been developed. This paper describes briefly the si mulation method and the modification to the conventional sampling method for the step length. Example simulation results have been obtained for several artifici al structures.展开更多
The backscatter from sonicated albumin microbubbles (Albunex) was analyzed using acoustic densitometry in an in vitro pulsatile heart model to evaluate the effects of pressure on the backscatter from Albunex, and the ...The backscatter from sonicated albumin microbubbles (Albunex) was analyzed using acoustic densitometry in an in vitro pulsatile heart model to evaluate the effects of pressure on the backscatter from Albunex, and the cardiac cyclic changes of intracardiac backscatter from sonicated albumin microbubbles in 16 healthy persons were analyzed. It was found that the Albunex microbubbles were compressed in systole and decompressed in diastole, causing corresponding changes of backscatter in cardiac cycle. Although the intensities of backscatter in diastole and systole were related to the concentration of microbubbles, the concentration of microbubbles had no effect on the difference of end-diastolic and end-systolic backscatter. The difference of the backscatter was highly correlated with end-systolic pressure (r=0.96, P=0.001). In human studies, we also observed same intracardiac cyclic changes of backscatter from sonicated albumin microbubbles. Our study indicates that it is possible to evaluate the intracardiac pressure non-invasively by analyzing the intracardiac backscatter from the microbubbles with acoustic densitometry.展开更多
A full aperture backscattering light diagnostic system (FABLDS) implemented on the Shen Guang-Ⅲ Prototype Laser Facility is described in the paper. FABLDS measures both stimulated brillouin scattering (SBS) and s...A full aperture backscattering light diagnostic system (FABLDS) implemented on the Shen Guang-Ⅲ Prototype Laser Facility is described in the paper. FABLDS measures both stimulated brillouin scattering (SBS) and stimulated Raman scattering (SRS) with a series of optical detectors. Energy sensors record the integrated energy, and streak cameras coupled with spectrometers measure the temporal spectrum of the backscattering light. This paper provides an overview of the FABLDS and detailed descriptions of the optical path. Special components, including off-axis parabolic mirror, spatial filter and optical light filters, are incorporated along the beam path for purifying the scattering light. Several hohlraum targets were employed, including C5H12 gas-filled targets and empty targets in the experiments. Results presented in the paper indicate that the fraction of backscatter light has been obviously shrinked when the laser is smoothed by continuous phase plates (CPP).展开更多
In this paper,we investigate the performance of commensal ambient backscatter communications(AmBC)that ride on a non-ortho go nal multiple access(NOMA)downlink transmission,in which a backscatter device(BD)splits part...In this paper,we investigate the performance of commensal ambient backscatter communications(AmBC)that ride on a non-ortho go nal multiple access(NOMA)downlink transmission,in which a backscatter device(BD)splits part of its received signals from the base station(BS)for energy harvesting,and backscatters the remaining received signals to transmit information to a cellular user.Specifically,under the power consumption constraint at BD and the peak transmit power constraint at BS,we derive the optimal reflection coefficient at BD,the optimal total transmit power at BS,and the optimal power allocation at BS for each transmission block to maximize the ergodic capacity of the ambient backscatter transmission on the premise of preserving the outage performance of the NOMA downlink transmission.Furthermore,we consider a scenario where the BS is restricted by a maximum allowed average transmit power and the reflection coefficient at BD is fixed due to BD’s low-complexity nature.An algorithm is developed to determine the optimal total transmit power and power allocation at BS for this scenario.Also,a low-complexity algorithm is proposed for this scenario to reduce the computational complexity and the signaling overheads.Finally,the performance of the derived solutions are studied and compared via numerical simulations.展开更多
The backscattering signal, which arises from the pulsed laser traveling through water, has limited the lidar system sensitivity and underwater target contrast. The transmitted optical carrier is modulated to be ultras...The backscattering signal, which arises from the pulsed laser traveling through water, has limited the lidar system sensitivity and underwater target contrast. The transmitted optical carrier is modulated to be ultrashort pulsed laser and it is effective to suppress the backscattering to adopt the coherent detection technology by identifying the modulation envelope. A nonstationary light field is formed in seawater by the ultrashort pulsed laser. The inherent relationship between the nonstationary light field formed by modulated lidar and the stationary light field formed by conventional lidar was discussed and the backscattering light model of the stationary light field for the ultrashort pulsed laser was proposed. The backscattering signal in modulated lidar system was processed and analyzed in the frequency domain on the basis of the model.展开更多
Harmful algal blooms (HABs), caused by the overgrowth of certain phytoplankton species, have negative effects on marine environments and coastal fisheries. In addition to cell-counting methods using phytoplankton nets...Harmful algal blooms (HABs), caused by the overgrowth of certain phytoplankton species, have negative effects on marine environments and coastal fisheries. In addition to cell-counting methods using phytoplankton nets, a hydroacoustic technique based on acoustic backscattering has been proposed for the detection of phytoplankton blooms. However, little is known of the acoustic properties of HAB species. In this study, as essential data to support this technique, we measured the acoustic properties of two HAB species, Akashiwo sanguinea and Alexandrium affine, which occur in the South Sea off the coast of Korea. Due to the small size of the target, we used ultrasound for the measurements. Experiments were conducted under laboratory and field conditions. In the laboratory experiment, the acoustic signal received from each species was directly proportional to the cell abundance. We derived a relationship between the cell abundance and acoustic signal received for each species. The measured signals were compared to predictions of a fluid sphere scattering model. When A. sanguinea blooms appeared at an abundance greater than 3 500 cells/mL, the acoustic signals varied with cell abundance, showing a good correlation. These results confirm that acoustic measurements can be used to detect HAB species.展开更多
基金supported by National Natural Science Foundation of China(No.61901229 and No.62071242)the Project of Jiangsu Engineering Research Center of Novel Optical Fiber Technology and Communication Network(No.SDGC2234)+1 种基金the Open Research Project of Jiangsu Provincial Key Laboratory of Photonic and Electronic Materials Sciences and Technology(No.NJUZDS2022-008)the Post-Doctoral Research Supporting Program of Jiangsu Province(No.SBH20).
文摘This paper investigates a wireless powered and backscattering enabled sensor network based on the non-linear energy harvesting model, where the power beacon(PB) delivers energy signals to wireless sensors to enable their passive backscattering and active transmission to the access point(AP). We propose an efficient time scheduling scheme for network performance enhancement, based on which each sensor can always harvest energy from the PB over the entire block except its time slots allocated for passive and active information delivery. Considering the PB and wireless sensors are from two selfish service providers, we use the Stackelberg game to model the energy interaction among them. To address the non-convexity of the leader-level problem, we propose to decompose the original problem into two subproblems and solve them iteratively in an alternating manner. Specifically, the successive convex approximation, semi-definite relaxation(SDR) and variable substitution techniques are applied to find a nearoptimal solution. To evaluate the performance loss caused by the interaction between two providers, we further investigate the social welfare maximization problem. Numerical results demonstrate that compared to the benchmark schemes, the proposed scheme can achieve up to 35.4% and 38.7% utility gain for the leader and the follower, respectively.
文摘The Backscatter communication has gained widespread attention from academia and industry in recent years. In this paper, A method of resource allocation and trajectory optimization is proposed for UAV-assisted backscatter communication based on user trajectory. This paper will establish an optimization problem of jointly optimizing the UAV trajectories, UAV transmission power and BD scheduling based on the large-scale channel state signals estimated in advance of the known user trajectories, taking into account the constraints of BD data and working energy consumption, to maximize the energy efficiency of the system. The problem is a non-convex optimization problem in fractional form, and there is nonlinear coupling between optimization variables.An iterative algorithm is proposed based on Dinkelbach algorithm, block coordinate descent method and continuous convex optimization technology. First, the objective function is converted into a non-fractional programming problem based on Dinkelbach method,and then the block coordinate descent method is used to decompose the original complex problem into three independent sub-problems. Finally, the successive convex approximation method is used to solve the trajectory optimization sub-problem. The simulation results show that the proposed scheme and algorithm have obvious energy efficiency gains compared with the comparison scheme.
基金supported by the 2021 Open Project Fund of Science and Technology on Electromechanical Dynamic Control Laboratory,grant number 212-C-J-F-QT-2022-0020China Postdoctoral Science Foundation,grant number 2021M701713+1 种基金Postgraduate Research&Practice Innovation Program of Jiangsu Province,grant number KYCX23_0511the Jiangsu Funding Program for Excellent Postdoctoral Talent,grant number 20220ZB245。
文摘The phenomenon of a target echo peak overlapping with the backscattered echo peak significantly undermines the detection range and precision of underwater laser fuzes.To overcome this issue,we propose a four-quadrant dual-beam circumferential scanning laser fuze to distinguish various interference signals and provide more real-time data for the backscatter filtering algorithm.This enhances the algorithm loading capability of the fuze.In order to address the problem of insufficient filtering capacity in existing linear backscatter filtering algorithms,we develop a nonlinear backscattering adaptive filter based on the spline adaptive filter least mean square(SAF-LMS)algorithm.We also designed an algorithm pause module to retain the original trend of the target echo peak,improving the time discrimination accuracy and anti-interference capability of the fuze.Finally,experiments are conducted with varying signal-to-noise ratios of the original underwater target echo signals.The experimental results show that the average signal-to-noise ratio before and after filtering can be improved by more than31 d B,with an increase of up to 76%in extreme detection distance.
基金the National Research Foundation of Korea(NRF)grant funded by theKoreaGovernment(MSIT)(No.2021R1C1C1013133)Basic ScienceResearch Programthrough the NationalResearch Foundation ofKorea(NRF)funded by the Ministry of Education(NRF-2020R1I1A3066543)the Soonchunhyang University Research Fund.
文摘Networks based on backscatter communication provide wireless data transmission in the absence of a power source.A backscatter device receives a radio frequency(RF)source and creates a backscattered signal that delivers data;this enables new services in battery-less domains with massive Internet-of-Things(IoT)devices.Connectivity is highly energy-efficient in the context of massive IoT applications.Outdoors,long-range(LoRa)backscattering facilitates large IoT services.A backscatter network guarantees timeslot-and contention-based transmission.Timeslot-based transmission ensures data transmission,but is not scalable to different numbers of transmission devices.If contention-based transmission is used,collisions are unavoidable.To reduce collisions and increase transmission efficiency,the number of devices transmitting data must be controlled.To control device activation,the RF source range can be modulated by adjusting the RF source power during LoRa backscatter.This reduces the number of transmitting devices,and thus collisions and retransmission,thereby improving transmission efficiency.We performed extensive simulations to evaluate the performance of our method.
基金the Ministry of Higher Education Malaysia for funding this research project through Fundamental Research Grant Scheme(FRGS)with Project Code:FRGS/1/2022/TK02/UCSI/02/1 and also to UCSI University.
文摘In wireless communications, the Ambient Backscatter Communication (AmBC) technique is a promisingapproach, detecting user presence accurately at low power levels. At low power or a low Signal-to-Noise Ratio(SNR), there is no dedicated power for the users. Instead, they can transmit information by reflecting the ambientRadio Frequency (RF) signals in the spectrum. Therefore, it is essential to detect user presence in the spectrum forthe transmission of data without loss or without collision at a specific time. In this paper, the authors proposed anovel Spectrum Sensing (SS) detection technique in the Cognitive Radio (CR) spectrum, by developing the AmBC.Novel Matched Filter Detection with Inverse covariance (MFDI), Cyclostationary Feature Detection with Inversecovariance (CFDI) and Hybrid Filter Detection with Inverse covariance (HFDI) approaches are used with AmBCto detect the presence of users at low power levels. The performance of the three detection techniques is measuredusing the parameters of Probability of Detection (PD), Probability of False Alarms (Pfa), Probability of MissedDetection (Pmd), sensing time and throughput at low power or low SNR. The results show that there is a significantimprovement via the HFDI technique for all the parameters.
文摘Non-Orthogonal Multiple Access(NOMA)has emerged as a novel air interface technology for massive connectivity in Sixth-Generation(6G)era.The recent integration of NOMA in Backscatter Communication(BC)has triggered significant research interest due to its applications in low-powered Internet of Things(IoT)networks.However,the link security aspect of these networks has not been well investigated.This article provides a new optimization framework for improving the physical layer security of the NOMA ambient BC system.Our system model takes into account the simultaneous operation of NOMA IoT users and the Backscatter Node(BN)in the presence of multiple EavesDroppers(EDs).The EDs in the surrounding area can overhear the communication of Base Station(BS)and BN due to the wireless broadcast transmission.Thus,the chief aim is to enhance link security by optimizing the BN reflection coefficient and BS transmit power.To gauge the performance of the proposed scheme,we also present the suboptimal NOMA and conventional orthogonal multiple access as benchmark schemes.Monte Carlo simulation results demonstrate the superiority of the NOMA BC scheme over the pure NOMA scheme without the BC and conventional orthogonal multiple access schemes in terms of system secrecy rate.
基金Project supported by the National Natural Science Foundation of China (Grant Nos 40476062 and 10374026).
文摘Based on the effective medium approximation theory of composites, the whitecap-covered sea surface is treated as a medium layer of dense seawater droplets and air. Two electromagnetic scattering models of randomly rough surface are applied to the investigation of microwave backscattering of breaking waves driven by strong wind. The shapes of seawater droplets are considered by calculating the effective dielectric constant of the whitecap layer. The responses of seawater droplets shapes, such as sphere and ellipsoid, to the backscattering coefficient are discussed. Numerical results of the models are in good agreement with the experimental measurements of horizontally and vertically polarized backscattering at microwave frequency 13.9GHz and different incidence angles.
基金supported in part by National Key R&D Program of China under Grant 2016YFE0200900part by Scientific Research Program of Beijing Municipal Commission of Education under Grant KM201910853003part by Major projects of Beijing Municipal Science and Technology Commission under Grant Z181100003218010
文摘Internet of Things (IoT) has attracted extensive interest from both academia and industries, and is recognized as an ultimate infrastructure to connect everything at anytime and anywhere. The implementation of IoT generally faces the challenges from energy constraint and implementation cost. In this paper, we will introduce a new green communication paradigm, the ambient backscatter (AmBC), that could utilize the environmental wireless signals for both powering a tiny-cost device and backscattering the information symbols. Specifically, we will present the basic principles of AmBC, analyze its features and advantages, suggest its open problems, and predict its potential applications for our future IoT.
基金This work was supported by the National Natural Science Foundation of China under grant No.50171040.
文摘In this paper, the orange peel defect in the surface range of the st14 steel sheet has been investigated using the electron backscattered diffraction (EBSD) technique. It has been found that the orange peel defect in the st14 steel sheet was resulted from the local coarse grains which were produced during hot-rolling due to the critical deformation in dual-phase zone. During deep drawing, the coarse grains with {100}<001> microtexture can slip on the {112}<111> slip system to form bulging and yields orange peel defects, while the coarse grains with {112}<110> orientation do not form the defect as the Schmid factor of {112}<111> slip system in it equals zero.
基金The Project "Development of Korea Operational Oceanographic System (PM57041)" funded by the Ministry of Land, Transport and Maritime Affairs of Korean Governmentthe Project "Cooperation on the Development of Basic Technologies for the Yellow Sea and East China Sea Operational Oceanographic System (YOOS)" funded by CKJORC and the Basic Research Projects (PE98731, PG47770 and PE98732) of the Korea Institute Ocean Science and Technologysupport by the PASCO Corporation,Japan is also apreciated
文摘An analysis of the radar backscattering from the ocean surface covered by oil spill is presented using a mi- crowave scattering model and Monte-Carlo simulation. In the analysis, a one-dimensional rough sea sur- face is numerically generated with an ocean waveheight spectrum for a given wind velocity. A two-layered medium is then generated by adding a thin oil layer on the simulated rough sea surface. The electric fields backscattered from the sea surface with two-layered medium are computed with the method of moments (MoM), and the backscattering coefficients are statistically obtained with N independent samples for each oil-spilled surface using the Monte-Carlo technique for various conditions of surface roughness, oil-layer thickness, frequency, polarization and incidence angle. The numerical simulation results are compared with theoretical models for clean sea surfaces and SAR images of an off-spilled sea surface caused by the Hebei (Hebei province, China) Spirit oil tanker in 2007. Further, conditions for better oil spill extraction are sought by the numerical simulation on the effects of wind speed and oil-layer thickness at different inci- dence angles on the backscattering coefficients.
基金the National Natural Science Foundation of China!10045001
文摘We present a coaxial detection of the backscattered electrons in SEM. The lens-aperture has been used to filter in energy and focus the backscattered electrons. This particular geometry allows us to eliminate the low energy backscattered electrons and collect the backscattered electrons, which are backscattered close to the incident beam orientation. The main advantage of this geometry is adapted to topographic contrast attenuation and atomic number contrast enhancement. Thus this new SEM is very suitable to analyze the material composition.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11874289,11827808,11504057,11525416,and 81601504)the Fundamental Research Funds for the Central Universities
文摘The goal of this study is to analyze the statistics of the backscatter signal from bovine cancellous bone using a Nakagami model and to evaluate the feasibility of Nakagami-model parameters for cancellous bone characterization. Ultrasonic backscatter measurements were performed on 24 bovine cancellous bone specimens in vitro and the backscatter signals were compensated for the frequency-dependent attenuation prior to the envelope detection. The statistics of the backscatter envelope were modeled using the Nakagami distribution. Our results reveal that the backscatter envelope mainly followed pre-Rayleigh distributions, and the deviations of the backscatter envelope from Rayleigh distribution decreased with increasing bone density. The Nakagami shape parameter(i.e., m) was significantly correlated with bone densities(R = 0.78–0.81, p < 0.001) and trabecular microstructures(|R| = 0.46–0.78, p < 0.05). The scale parameter(i.e.,?) and signal-to-noise ratio(SNR) also yielded significant correlations with bone density and structural features. Multiple linear regressions showed that bone volume fraction(BV/TV) was the main predictor of the Nakagami parameters,and microstructure produced significantly independent contribution to the prediction of Nakagami distribution parameters,explaining an additional 10.2% of the variance at most. The in vitro study showed that statistical parameters derived with Nakagami model might be useful for cancellous bone characterization, and statistical analysis has potential for ultrasonic backscatter bone evaluation.
基金supported by National Natural Science Foundation of China (Grant No. 50864002)Guangxi Provincial Natural Science Foundation of China (Grant No. 0991001)
文摘The Al-Si-Mg alloy which can be strengthened by heat treatment is widely applied to the key components of aerospace and aeronautics. Iron-rich intermetallic compounds are well known to be strongly influential on mechanical properties in Al-Si-Mg alloys. But intermetallic compounds in cast Al-Si-Mg alloy intermetallics are often misidentified in previous metallurgical studies. It was described as many different compounds, such as AlFeSi, Al8Fe2Si, Al5(Fe, Mn)3Si2 and so on. For the purpose of solving this problem, the intermetallic compounds in cast Al-Si alloys containing 0.5% Mg were investigated in this study. The iron-rich compounds in Al-Si-Mg casting alloys were characterized by optical microscope(OM), scanning electron microscope(SEM), energy dispersive X-ray spectrometer(EDS), electron backscatter diffraction(EBSD) and X-ray powder diffraction(XRD). The electron backscatter diffraction patterns were used to assess the crystallographic characteristics of intermetallic compounds. The compound which contains Fe/Mg-rich particles with coarse morphologies was Al8FeMg3Si6 in the alloy by using EBSD. The compound belongs to hexagonal system, space group P6_2m, with the lattice parameter a=0.662 nm, c=0.792 nm. The β-phase is indexed as tetragonal Al3FeSi2, space group I4/mcm, a=0.607 nm and c=0.950 nm. The XRD data indicate that Al8FeMg3Si6 and Al3FeSi2 are present in the microstructure of Al-7Si-Mg alloy, which confirms the identification result of EBSD. The present study identified the iron-rich compound in Al-Si-Mg alloy, which provides a reliable method to identify the intermetallic compounds in short time in Al-Si-Mg alloy. Study results are helpful for identification of complex compounds in alloys.
基金This work wus supporeal by the National Naturul Science Foundation of China(No.10025420 and No.90206009).
文摘A new parallel Monte Carlo simulation method of secondary electron (SE) and back scattered electron images (BSE) of scanning electron microscopy (SEM) for a com plex geometric structure has been developed. This paper describes briefly the si mulation method and the modification to the conventional sampling method for the step length. Example simulation results have been obtained for several artifici al structures.
基金This Project was supported by a grant from the NationalSciences Foundtion of China (No. 39970 30 8)
文摘The backscatter from sonicated albumin microbubbles (Albunex) was analyzed using acoustic densitometry in an in vitro pulsatile heart model to evaluate the effects of pressure on the backscatter from Albunex, and the cardiac cyclic changes of intracardiac backscatter from sonicated albumin microbubbles in 16 healthy persons were analyzed. It was found that the Albunex microbubbles were compressed in systole and decompressed in diastole, causing corresponding changes of backscatter in cardiac cycle. Although the intensities of backscatter in diastole and systole were related to the concentration of microbubbles, the concentration of microbubbles had no effect on the difference of end-diastolic and end-systolic backscatter. The difference of the backscatter was highly correlated with end-systolic pressure (r=0.96, P=0.001). In human studies, we also observed same intracardiac cyclic changes of backscatter from sonicated albumin microbubbles. Our study indicates that it is possible to evaluate the intracardiac pressure non-invasively by analyzing the intracardiac backscatter from the microbubbles with acoustic densitometry.
文摘A full aperture backscattering light diagnostic system (FABLDS) implemented on the Shen Guang-Ⅲ Prototype Laser Facility is described in the paper. FABLDS measures both stimulated brillouin scattering (SBS) and stimulated Raman scattering (SRS) with a series of optical detectors. Energy sensors record the integrated energy, and streak cameras coupled with spectrometers measure the temporal spectrum of the backscattering light. This paper provides an overview of the FABLDS and detailed descriptions of the optical path. Special components, including off-axis parabolic mirror, spatial filter and optical light filters, are incorporated along the beam path for purifying the scattering light. Several hohlraum targets were employed, including C5H12 gas-filled targets and empty targets in the experiments. Results presented in the paper indicate that the fraction of backscatter light has been obviously shrinked when the laser is smoothed by continuous phase plates (CPP).
基金supported in part by the National Key R&D Program of China under Grant 2018YFE0100500the National Natural Science Foundation of China under Grant 61871387,Grant 61861041,and Grant 61871471+2 种基金the Natural Science Basic Research Program of Shaanxi under Grant 2019JM-019Academy of Finland via:(a)ee-Io T project n.319009,(b)FIREMAN consortium CHIST-ERA/n.326270,and(c)Energy Net Research Fellowship n.321265/n.328869the NUDT Research Fund under Grant ZK17-03-08。
文摘In this paper,we investigate the performance of commensal ambient backscatter communications(AmBC)that ride on a non-ortho go nal multiple access(NOMA)downlink transmission,in which a backscatter device(BD)splits part of its received signals from the base station(BS)for energy harvesting,and backscatters the remaining received signals to transmit information to a cellular user.Specifically,under the power consumption constraint at BD and the peak transmit power constraint at BS,we derive the optimal reflection coefficient at BD,the optimal total transmit power at BS,and the optimal power allocation at BS for each transmission block to maximize the ergodic capacity of the ambient backscatter transmission on the premise of preserving the outage performance of the NOMA downlink transmission.Furthermore,we consider a scenario where the BS is restricted by a maximum allowed average transmit power and the reflection coefficient at BD is fixed due to BD’s low-complexity nature.An algorithm is developed to determine the optimal total transmit power and power allocation at BS for this scenario.Also,a low-complexity algorithm is proposed for this scenario to reduce the computational complexity and the signaling overheads.Finally,the performance of the derived solutions are studied and compared via numerical simulations.
文摘The backscattering signal, which arises from the pulsed laser traveling through water, has limited the lidar system sensitivity and underwater target contrast. The transmitted optical carrier is modulated to be ultrashort pulsed laser and it is effective to suppress the backscattering to adopt the coherent detection technology by identifying the modulation envelope. A nonstationary light field is formed in seawater by the ultrashort pulsed laser. The inherent relationship between the nonstationary light field formed by modulated lidar and the stationary light field formed by conventional lidar was discussed and the backscattering light model of the stationary light field for the ultrashort pulsed laser was proposed. The backscattering signal in modulated lidar system was processed and analyzed in the frequency domain on the basis of the model.
基金project titled "Establishment and demonstration of red tide detection and prediction system for minimizing red tide damage" funded by the Ministry of Oceans and Fisheries, Korea (PM61410)
文摘Harmful algal blooms (HABs), caused by the overgrowth of certain phytoplankton species, have negative effects on marine environments and coastal fisheries. In addition to cell-counting methods using phytoplankton nets, a hydroacoustic technique based on acoustic backscattering has been proposed for the detection of phytoplankton blooms. However, little is known of the acoustic properties of HAB species. In this study, as essential data to support this technique, we measured the acoustic properties of two HAB species, Akashiwo sanguinea and Alexandrium affine, which occur in the South Sea off the coast of Korea. Due to the small size of the target, we used ultrasound for the measurements. Experiments were conducted under laboratory and field conditions. In the laboratory experiment, the acoustic signal received from each species was directly proportional to the cell abundance. We derived a relationship between the cell abundance and acoustic signal received for each species. The measured signals were compared to predictions of a fluid sphere scattering model. When A. sanguinea blooms appeared at an abundance greater than 3 500 cells/mL, the acoustic signals varied with cell abundance, showing a good correlation. These results confirm that acoustic measurements can be used to detect HAB species.