Dual-doping for enhancing chemical stability of functional anionic units in sulfide for high-performance all-solid-state lithium batteries

The sulfide-based solid-state electrolytes(SEs)reactivity toward moisture and Li-metal are huge barriers that impede their large-scale manufactu ring and applications in all-solid-state lithium batteries(ASSLBs).Herein,we proposed an Al and O dual-doped strategy for Li_(3)PS_(4)SE to regulate the chemical/electrochemical stability of anionic PS_(4)^(3-)tetrahedra to mitigate structural hydrolysis and parasitic reactions at the SE/Li interface.The optimized Li_(3.08)A_(10.04)P_(0.96)S_(3.92)O_(0.08)SE presents the highestσLi+of 3.27 mS cm^(-1),which is~6.8 times higher than the pristine Li_(3)PS_(4)and excellently inhibits the structural hydrolysis for~25 min@25%humidity at RT.DFT calculations confirmed that the enhanced chemical stability was revealed to the intrinsically stable entities,e.g.,POS33-units.Moreover,Li_(3.08)Al_(0.04)P_(0.96)S_(3.92)O_(0.08)SE cycled stably in Li//Li symmetric cell over 1000 h@0.1 mA cm^(-2)/0.1 mA h cm^(-2),could be revealed to Li-Al alloy and Li_(2)Oat SE/Li interface impeding the growth of Li-dendrites during cycling.Resultantly,LNO@LCO/Li_(3.08)Al_(0.04)P_(0.96)S_(3.92)O_(0.08)/Li-In cell delivered initial discharge capacities of 129.8 mA h g^(-1)and 83.74%capacity retention over 300 cycles@0.2 C at RT.Moreover,the Li_(3.08)Al_(0.04)P_(0.96)S_(3.92)O_(0.08)SE presented>90%capacity retention over 200 and 300 cycles when the cell was tested with LiNi_(0.8)Co_(0.15)Al_(0.05)O_(2)(NCA)cathode material vs.5 and 10 mg cm^(-2)@RT.

Block copolymer electrolyte with adjustable functional units for solid polymer lithium metal battery

Solid polymer electrolytes have been considered as the promising candidates to improve the safety and stability of high-energy lithium metal batteries.However,the practical applications of solid polymer electrolytes are still limited by the low ionic conductivity,poor interfacial contact with electrodes,narrow electrochemical window and weak mechanical strength.Here,a series of novel block copolymer electrolytes with three-dimensional networks are designed by cross-linked copolymerization of the polyethylene glycol soft segments and hexamethylene diisocyanate trimer hard segments.Their ionic migration performances and interface compatibilities with Li metal anode have been optimized delicately by tailoring the ratio of these functional units.The optimized block copolymer electrolyte has shown an amorphous crystalline structure,a high ionic conductivity of ~5.7×10^(-4)S cm^(-1),high lithium ion transference number(~0.49),wide electrochemical window up to ~4.65 V(vs.Li+/Li) and favorable mechanical strength at 55℃.Furthermore,the enhanced interface compatibility can well support the normal operations of lithium metal batteries using both LiFePO4 and LiNi0.8Co0.15Al0.05O2 cathodes.This study not only paves a new way to develop solid polymer electrolyte with optimizing functional units,but also provides a polymer electrolyte design strategy for the application demand of lithium metal battery.

Reusing Test Cases Based on the Function Point

Reusing test cases from existing test case library is quite common in the software testing field. Testing practice tells us that there is a strong relationship between the granularity of a function unit under testing and that of the test case. A function unit with small granularity usually results in the test cases with the same small granularity. Therefore a test case defined as the function point,i. e.,the smallest size function unit,was provided for the first time.Though test cases with smaller granularity usually have better reusability,the cost of accurately reusing and integrating such test cases is also higher. In order to balance the test case reusability and the cost of test case reuse,a novel test case reuse model based on the function point was proposed in this paper. In this model,a reusable test case for specification-based testing was defined and some reuse strategies and three formal reuse methods were given. Finally,the complete automatic software process was realized by a reusing generation tool. The new method has improved reuse accuracy,while greatly enhances the software productivity.

On the Laplace transform of delta function

Delta function is an important function in mathematics and physics. In this paper, the Laplace transforms of δ(t)and δ(t-τ)have been discussed in detail. After the Laplace transform of δ(t)is analyzed, the author has found that three aspects should be taken into account, i.e. τ→0+, τ→0- andτ=0; and it is the same with the Laplace transform of δ(t-τ). Then the results of the Laplace transform of Delta function have been obtained in a rigorous and comprehensive sense.

THE ASYMPTOTIC FORMULA OF THE ORTHOGONAL RATIONAL FUNCTION ON THE UNIT CIRCLE

In this paper we obtained the asymptotic formula of the orthogonal rational function on the unit circle with respect to the weight function μ(z) with preasigned poles, which are in the exterior of the unit disk.

Symmetry-breaking of LiMn_(6) hexatomic-ring in grain surface of Li_(2)MnO_(3)

LiMn_(6) hexatomic-rings act as functional units in Li-rich layered oxides(LLOs),which determine the capacity,voltage,and structural stability of LLOs.However,the symmetry of the LiMn_(6) hexatomic-ring is always broken,especially in the grain surface of LLOs,which will greatly affect its electrochemical performance.Herein,the symmetry-breaking of LiMn_(6) hexatomic-ring in the grain surface of Li_(2)MnO_(3) was studied,and their effect on charge compensation mechanism and structure evolution behavior was thoroughly investigated.The results show that the electrochemical activity of the symmetry-broken LiMn_(6) hexatomic-ring is higher than that of the unbroken LiMn_(6),and the former is more favorable for spinelization on the grain surface.Furthermore,the exposure proportion of crystallographic planes with different symmetry-broken LiMn_(6) hexatomic-ring has also been discussed,which can be adjusted by changing the partial pressure of oxygen.The in-depth understanding of the symmetry-breaking of LiMn_(6) hexatomic-ring will provide more targeted strategies for designing high-performance LLOs cathodes for lithium-ion batteries.

Review on birefringence in borates based on birefringence-active functional groups and arrangements

As a fundamental parameter of the optical crystals,birefringence plays a vital role in many optical applications,such as phase modulation,light splitting,and polarization,especially the phase matching process of the nonlinear optical crystals.The big birefringence not only benefits to the miniaturization of related devices,but also broadens the phase-matching wavelength range of nonlinear optical crystals.The design and synthesis of crystals with large birefringence becomes a hot research topic due to its more and more important applications in the optical modulation and laser technology fields.Herein,crystals with birefringence greater than 0.05 in the borate system are reviewed and classified according to different birefringent active groups,and the relationship between structure and properties is thoroughly explored.It is hoped that this review will provide a clear understanding of what kinds of building units and arrangements would have more opportunity to get adequate birefringence in borate systems and provide the statistical references to encourage the emergence of better crystal materials with large birefringence.

Association between Diabetes Mellitus and Oral Health Status in Japanese Adults

Aim The objective of this study was to analyze the oral health among Japanese adults, with and without diabetes mellitus. Methodology The subjects were 518 community residents aged 20 to 91 years in Japan, who participated in the ＂Akita health and nutrition survey＂ and the ＂Akita dental disease survey＂, conducted in 2006. The surveys comprised a self-administered questionnaire, along with medical and dental examinations. Results Using the community periodontal index （CPI）, the mean numbers of sextants presenting codes 0, 1 and 2 were significantly lower in diabetics than non-diabetics among the 59 years or younger age group. Although the mean numbers of sextants with codes 0, 1 and 2 among the 60 to 69 years age group were lower, and sextants with a code X among the 59 years or younger age group were higher in diabetics than non-diabetics, no statistically significant differences were detected. The tendency of lower mean numbers of natural teeth and functional tooth units in diabetics than non-diabetics was observed, however no differences were statistically significant. Conclusion The outcome of periodontal disease seemed to be influenced by the diabetic state to some degree, but a clear association between diabetes and oral health status was not found.

RESEARCH OF REGULARITY OF THROWING MOVEMENT FOR SOLID PARTICLE ON THE SHAKER'S SCREEN

By means of Delta-function & unit step function to express the force of solid particle on plane inertial shaker's screen, an mathematical model of the differential equation type was set up and solved. According to analysis of the solution, the relation is given between the throw period & displacement with the parameters of shaker design & solid particle. The method of numerical value calculation & analysis for the relation is given too.

Identifying urban land use social functional units:a case study using OSM data

Urban land use is always the central focus of urban planners and policymakers when pursuing urban sustainable development.Currently,many studies have explored urban land use using satellite data,but few of them can identify the social function of land use through these data.In this research,OpenStreetMap(OSM)data are used to extract urban land use social functional units.Firstly,the OSM data are transferred to actual land use types based on the established mapping rules between OSM data and the urban land use classification standards.Then,the improved DBSCAN algorithm is applied with OSM data of the study area after estimating the parameters of the neighborhood radius(Eps)and the minimum polygons(MinPolys)based on the polygon density.With the two estimated parameters,the improved DBSCAN algorithm is used to cluster residential,commercial and public service land use social functional polygons of the OSM data.Following that,the clusters of the three land use types are processed into land use social functional units.The results show that OSM data perform well in determining these three land use social functional clusters using the improved DBSCAN algorithm,and the social functional units display obvious spatial features.

Establishment of Knowledge Base Management System and the Type Selection of Mechanism for Mechanism Kinematic Scheme

Firstly data standardization technology and combined classification method have been applied to carry out classification of kinematic behaviors and mechanisms in the mapping field between the kinematic behavior level and the mechanism level of conceptual design.The principle of computer coding and storing have been built to give a fast and broad selection of mechanisms that meets the requirements of basic motion characters.Then on the basis of mentioned above,the heuristic matching propagation principle (HMPP) of kinematic behaviors and its true table serves as a guide to perform mechanism types selection.Finally an application is given to indicate its practicability and effectiveness.

Software/Hardware Integrating Model of Embedded Reconfigurable Computing System for Digital Signal Processing

The system model of embedded reconfigurable system is discussed firstly, followed by the construction of the soft- ware and hardware platform. Based on the platform, the function trait and control models of digital signal processing tasks are described. According the functional unit model and control model, a software/hardware integrating model with dataflow control infrastructure is constructed. The software/hardware partition is carded out in the experiments of ultrasonic signal processing, and the results show that the system model is practicable.

Prioritizing Patient Assessment Data (PAD) Using the Japanese Psychiatric Nursing Assessment Classification System (PsyNACS)©

The study identified priorities of the Patient Assessment Data (PAD) using the Japanese Psychiatric Nursing Assessment Classification System (PsyNACS©) derived from 644 psychiatric nurses’ responses who were practicing in specific units: Acute Care Units (ACU), General Care Units (GCU), Long-term Care Units (LCU), physically Complicated Disease Care Units (CDCU), and Dementia Care Units (DCU). Secondary analysis of the PsyNACS©on-line survey data using four levels of “importance” was used to determine the priorities: 1) unnecessary;2) quite important;3) important and 4) very important. The Mean Factor Points (MFP) and the Welch’s ANOVA were calculated. PsyNACS©score of 3 or higher indicates the PAD as priority. The results showed that in the ACU PAD1, “Psychological symptom”, “Stress coping”, and “Mood disorder and aggression”, and PAD2 “Information of adherence”, and “Information of the psychiatry rehabilitation”, and PAD7 “Situation of the family and social life”, “Relationship to the health care providers”, and “Relationships with others” are high priority (high importance). Other PADs showed results below PsyNACS©score of 3. The GCU had PAD 3 “Balance of water”, the LCU had PAD 4 “Intention/Point of view”, and “Thoughts of the patient” and PAD 7 “Disease and family”. The CDCU showed PAD 2 “Blood test”, PAD 3 “Excretion situation”, and PAD 5 “General health condition”, “Respiratory and chest symptom”, and “Vital signs”, and the DCU had PAD 1 “Cognition function”, and “Delirium and derangement capacity to register failure”, PAD 3 “Function of eating”, PAD 6 “Egestion and cleanliness” and PAD 8 “Activity and sleeping”, and “Mobility capability”. These classifications indicated levels of importance in the CAD comprising the PAD below the score of “2”. Japanese psychiatric hospitals specify assessments according to functional areas. By prioritizing the CAD for each PAD, more effective and efficient assessments can be performed according to practice unit.

A decade of job realignment movement at large Chinese and American academic libraries from 1998 to 2007

Based on a questionnaire survey,the paper made a comparative study on the changes of traditional library positions within the context of the emerging professional positions and functional units at some large academic libraries in China and in the United States from 1998 to 2007.It describes how some of the library professional positions and functional units have gone through a time period of intensified and proactive position allocation realignment in terms of their rise,decline,fission and/or fusion within the administrative context of their library's evolving changes in missions,objectives and service delivery structure under the impact of the rapid development of information technologies.Such changes are graphically demonstrated in several charts in this paper to highlight the evolutionary development of academic librarianship in general and the waves of changes for library position reallocations in specific in the ten-year period under study.It is believed that such a study can be useful for discerning the overall developing trend of academic librarianship,especially in the area of the rising professional and social status of academic librarianship during this period.The movement of library position allocation realignment was a corresponding response at the time to the influx of applicable information technologies to the library scene.It not only made the library operation to become'leaner and meaner,' but also gave added impetus to the rise of the professional and social status of their practitioners in the society due to the latter's enhanced service delivery innovations and capabilities for meeting their constituencies' timely information needs more satisfactorily.

Experimental Study on Stress Relaxation and Creep Properties of Human Thoracolumbar Vertebral Bodies and Intervertebral Discs

Objective:Underwater shock can produce extremely high accelerations, resulting in severe human injuries on shipboard, and human thoraco lumbar spines are prone to suffer from injuries by ship shock motion. To observe the viscoelasticity of thoracolumbar of young fresh cadavers, and to provide biomechanical parameters for both research and clinical practice. Materials and Methods:5 fresh young male cadavers (aged 22 to 31 years) were provided, and 15 thoracolumbar spinal anatomies of 5 samples were harvested within 1 hour of death. WE-10A universal testing machine was used for creep and relaxation tests.Results:Stress relaxation and creep deformation equations are derived from the biomechanics model and the measured and simulated curves are compared. The creep in vertebral bodies and intervertebral discs exhibited significantly changes in the first 5 min and 10 min, respectively. The stress rapidly decreased in the first 2 min, and then gradually went balance during the relaxation process. Conclusion:The change in creep rate is significant at early stage,and gradually slows down.This indicates that the differences between internal pressure and local pressure are decreased until balance. The simulated curve derived from equation coincides with the experimental data to a large degree, which states that the equation is rational and reliable.

Material exploration via designing spatial arrangement of octahedral units: a case study of lead halide perovskites

Halide perovskites have attracted tremendous attention as semiconducting materials for various optoelectronic applications.The functional metal-halide octahedral units and their spatial arrangements play a key role in the optoelectronic properties of these materials.At present,most of the efforts for material exploration focus on substituting the constituent elements of functional octahedral units,whereas designing the spatial arrangement of the functional units has received relatively little consideration.In this work,via a global structure search based on density functional theory(DFT),we discovered a metastable three-dimensional honeycomb-like perovskite structure with the functional octahedral units arranged through mixed edge-and comer-sharing.We experimentally confirmed that the honeycomb-like perovskite structure can be stabilized by divalent molecular cations with suitable size and shape,such as 2,2’-bisimidazole(BIM).DFT calculations and experimental characterizations revealed that the honeycomb-like perovskite with the formula of BIMPb2l6,synthesized through a solution process,exhibits high electronic dimensionality,a direct allowed bandgap of 2.1 eV,small effective masses for both electrons and holes,and high optical absorption coefficients,which indicates a significant potential for optoelectronic applications.The employed combination of DFT and experimental study provides an exemplary approach to explore prospective optoelectronic semiconductors via spatially arranging functional units.

Bounded Projections and Duality on Spaces of Holomorphic Functions in the Unit Ball of (?)~n

In this paper three Banach spaces A(ф),A(ф)and A~1(ф)of functions holomor- phic in the unit ball B of ■~n are defined.We exhibit bounded projections from C(B)onto A(ф),from L~1(B)onto A~1(ф),and from L~∞(B)onto A(ф).Using these projections,we show that A(ф)~*≌A~1(ф)and A~1(ф)~*≌A(ф).

π-Extension of Isoindigos(IIDs)through C—H/N—H Activation and Alkyne Annulation

Isoindigo(IID)is widely used as organic dye and conjugated unit in opto-electronic materials.Functionalization of IID to increase its structural complexity is demanding for obtaining diversity properties.Herein,we developed a direct C-H/N-H activation method of IIDs via double alkyne annulations and synthesizedπ-extended IIDs with two pairs of 5/7 membered rings.The structure of theπ-extended IIDs was characterized and confirmed by^(1)H NMR,^(13)C NMR,HRMS and X ray crystal analysis.Their physical properties were characterized by UV-vis absorption,cyclic voltammetry and thermogravimetric analysis.The absorption coefficient of the annulated products enhanced significantly compared with the non-annulated analogue.

Life cycle assessment of alkali-activated materials:a systematic literature review

The physical-mechanical,chemical,and durability characteristics of alkali-activated materials(AAMs)have been widely investigated.However,a critical gap in the literature is the lack of a comprehensive overview of recently published literature regarding the life cycle assessment(LCA)of these binders.This study aims to fill that gap by conducting a systematic literature review of globally published literature on the topic.This paper consolidates knowledge by searching different databases,focusing on LCA studies that used AAMs as pastes,mortars,concretes,bricks,and rammed earth/soil blocks.The selected articles were reviewed and categorized based on precursors,alkaline activators,functional units,system boundaries,life cycle inventory databases,allocation,impact methodologies,and software used.Additionally,this paper also critically analyzes the key challenges of LCA for AAMs.The major challenges were identified as selecting a functional unit,subjectivity in boundary systems,and data interpretation.This work concludes that AAMs show substantial advantages in global warming potential compared to ordinary Portland cement-based materials;however,the average of other categories such as marine ecotoxicity and ozone layer depletion has been reported to be higher than for the reference samples.

Reduced graphene oxide@carbon sphere based metacomposites for temperature-insensitive and efficient microwave absorption

With the increasing advance of fifth generation(5G)network and the gradual expansion of digital devices,harsh working environment for electronic devices has spawned higher requirements for microwave absorbing materials(MAMs).Since both the electromagnetic response and energy conversion character vary with temperature,to achieve temperature insensitive microwave absorption behaviour in wide temperature range has become extremely challenging.In this work,structured metacomposites containing sub-wavelength reduced graphene oxide(RGO)@carbon spheres were fabricated,and the microwave absorption was further improved through structural and composition design of the RGO@carbon units.Due to the unique anti-reflection effect on microwave of the metacomposites,the temperature-insensitive electromagnetic performance at elevated temperature could be exhibited.Moreover,both the dielectric relaxation behaviour and microwave absorption proformance of the system could be further increased.As a result,the effective absorption bandwidth(reflection loss(RL)<−10 dB)of the metacomposites with only 3.0 wt.%filler content could cover the entire X-band(8.2–12.4 GHz)frequency ranging from 298 to 473K.The metacomposite proposed in this work provides a“de-correlating”strategy to break the linkage between microwave absorption behaviour and temperature,which offers an interesting plateau for fabricating efficient high-temperature microwave absorption structures with tunable and designable advantages.