Extended Group Foliation Method and Functional Separation of Variables to Nonlinear Wave Equations

Generalized functional separation of variables to nonlinear evolution equations is studied in terms of the extended group foliation method, which is based on the Lie point symmetry method. The approach is applied to nonlinear wave equations with variable speed and external force. A complete classification for the wave equation which admits functional separable solutions is presented. Some known results can be recovered by this approach.

SOME RESULTS REGARDING PARTIAL DIFFERENTIAL POLYNOMIALS AND THE UNIQUENESS OF MEROMORPHIC FUNCTIONS IN SEVERAL VARIABLES

In this paper,we mainly investigate the value distribution of meromorphic functions in Cmwith its partial differential and uniqueness problem on meromorphic functions in Cmand with its k-th total derivative sharing small functions.As an application of the value distribution result,we study the defect relation of a nonconstant solution to the partial differential equation.In particular,we give a connection between the Picard type theorem of Milliox-Hayman and the characterization of entire solutions of a partial differential equation.

Functional Variable Separation for Extended Nonlinear Elliptic Equations

This paper is devoted to the study of functional variable separation for extended nonlinear elliptic equations. By applying the functional variable separation approach to extended nonlinear elliptic equations via the generalized conditional symmetry, we obtain complete classification of those equations which admit functional separable solutions （FSSs） and construct some exact FSSs to the resulting equations.

Functional Separable Solutions to Nonlinear Diffusion Equations by Group Foliation Method

We consider the functional separation of variables to the nonlinear diffusion equation with source and convection term： ut = （A（x）D（u）ux）x ＋ B（x）Q（u）, Ax ≠ 0. The functional separation of variables to this equation is studied by using the group foliation method. A classification is carried out for the equations which admit the function separable solutions. As a consequence, some solutions to the resulting equations are obtained.

The derivative-dependent functional variable separation for the evolution equations

This paper studies variable separation of the evolution equations via the generalized conditional symmetry. To illustrate, we classify the extended nonlinear wave equation utt = A（u, ux）uxx＋B（u, ux, ut） which admits the derivative- dependent functional separable solutions （DDFSSs）. We also extend the concept of the DDFSS to cover other variable separation approaches.

Functional Separable Solutions of Nonlinear Heat Equations in Non-Newtonian Fluids

We study the functional separation of variables to the nonlinear heat equation： ut = （A（x）D（u）ux^n）x＋ B（x）Q（u）, Ax≠0. Such equation arises from non-Newtonian fluids. Its functional separation of variables is studied by using the group foliation method. A classification of the equation which admits the functional separable solutions is performed. As a consequence, some solutions to the resulting equations are obtained.

SPACES OF ANALYTIC FUNCTIONS REPRESENTED BY DIRICHLET SERIES OF TWO COMPLEX VARIABLES

We consider the space X of all analytic functionsof two complex variables s1 and s2, equipping it with the natural locally convex topology and using the growth parameter, the order of f as defined recently by the authors. Under this topology X becomes a Frechet space Apart from finding the characterization of continuous linear functionals, linear transformation on X, we have obtained the necessary and sufficient conditions for a double sequence in X to be a proper bases.

FRACTIONAL INTEGRALS OF PERIODIC FUNCTIONS OF SEVERAL VARIABLES

In this paper it has been systematically studied the imbedding properties o f fractional integral operators of periodic functions of several variables,and isomorphic properties of fractional intregral operators in the spaces of Lipschitz continuous functions. It has also been proved that the space of fractional integration,the space of Lipschitz continuous functions and the Sobolev space are identical in L^2-norm.Results obtainedhere are not true for fractional integrals(or Riesz potentials)in R^n.

New Formulation for Arbitrary Cracks Problem and Its Stress Intensity Factor of Plane Elasticity

Aim The general arbitrary cracked problem in an elastic plane was discussed. Methods For the purpose of acquiring the solution of the problem, a new formulation on the problem was proposed. Compared with the classical plane elastic crack model, only the known conditions were revised in the new formulation, which are greatly convenient to solve the problem, and no other new condition was given. Results and Conclusion The general exact analytic solution is given here based on the formulation though the problem is very complicated. Furthermore, the stress intensity factors K Ⅰ, K Ⅱ of the problem are also given.

Exact analytic solutions for an elliptic hole with asymmetric collinear cracks in a one-dimensional hexagonal quasi-crystal

Using the complex variable function method and the technique of conformal mapping, the anti-plane shear problem of an elliptic hole with asymmetric colfinear cracks in a one-dimensional hexagonal quasi-crystal is solved, and the exact analytic solutions of the stress intensity factors （SIFs） for mode Ⅲ problem are obtained. Under the limiting conditions, the present results reduce to the Griffith crack and many new results obtained as well, such as the circular hole with asymmetric collinear cracks, the elliptic hole with a straight crack, the mode T crack, the cross crack and so on. As far as the phonon field is concerned, these results, which play an important role in many practical and theoretical applications, are shown to be in good agreement with the classical results.

Approximate Generalized Conditional Symmetries for the Perturbed Nonlinear Diffusion-Convection Equations

The concept of approximate generalized conditional symmetry （A GCS） as a generalization to both approximate Lie point symmetry and generalized conditional symmetry is introduced, and it is applied to study the perturbed nonlinear diffusion-convection equations. Complete classification of those perturbed equations which admit cerrain types of AGCSs is derived. Some approximate solutions to the resulting equations can be obtained via the AGCS and the corresponding unperturbed equations.

Two kinds of contact problems in three-dimensional icosahedral quasicrystals

Two kinds of contact problems, i.e., the frictional contact problem and the adhesive contact problem, in three-dimensional （3D） icosahedral quasicrystals are dis- cussed by a complex variable function method. For the frictional contact problem, the contact stress exhibits power singularities at the edge of the contact zone. For the adhe- sive contact problem, the contact stress exhibits oscillatory singularities at the edge of the contact zone. The numerical examples show that for the two kinds of contact problems, the contact stress exhibits singularities, and reaches the maximum value at the edge of the contact zone. The phonon-phason coupling constant has a significant effect on the contact stress intensity, while has little impact on the contact stress distribution regu- lation. The results are consistent with those of the classical elastic materials when the phonon-phason coupling constant is 0. For the adhesive contact problem, the indentation force has positive correlation with the contact displacement, but the phonon-phason cou- pling constant impact is barely perceptible. The validity of the conclusions is verified.

Stress analytical solution for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform distributed pressure

The stress state around circular openings,such as boreholes,shafts,and tunnels,is usually needed to be evaluated.Solutions for stresses,strains and ultimate bearing capacities of pressurized hollow cylinder are common cases.Stress analytical method for plane problem of a double-layered thick-walled cylinder subjected to a type of non-uniform pressure on the outer surface and uniform radial pressure on the inner surface is given.The power series method of complex function is used.The stress analytical solution is obtained with the assumption that two layers of a cylinder are fully contacted.The distributions of normal and tangential contact stress along the interface,tangential stress on the inner boundary and stresses in the radial direction at θ=0°,45° and 90°,are obtained.An example indicates that,when the elastic modulus of the inner layer of a double-layered thick-walled cylinder is smaller than that of the outer layer,the tangential stress is smaller than that in the corresponding point for a traditional cylinder composed of homogeneous materials.In that way,stress concentration at the inner surface can be alleviated and the stress distribution is more uniform.This is a capable way to enhance the elastic ultimate bearing capacity of thick-walled cylinder.

Anti-plane analysis of semi-infinite crack in piezoelectric strip

Using the complex variable function method and the technique of the conformal mapping, the fracture problem of a semi-infinite crack in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load. The analytic solutions of the field intensity factors and the mechanical strain energy release rate are presented under the assumption that the surface of the crack is electrically impermeable. When the height of the strip tends to infinity, the analytic solutions of an infinitely large piezoelectric solid with a semi-infinite crack are obtained. Moreover, the present results can be reduced to the well-known solutions for a purely elastic material in the absence of the electric loading. In addition, numerical examples are given to show the influences of the loaded crack length, the height of the strip, and the applied mechanical/electric loads on the mechanical strain energy release rate.

INTEGRAL EQUATION METHOD'S APPLICATION IN HOLE-EDGE STRESS OF COMPOSITE MATERIAL PLATE WITH DIFFERENT SHAPED HOLES

The strength of composite plate with different hole-shapes is always one of the most important but complicated issues in the application of the composite material. The holes will lead to mutations and discontinuity to the structure. So the hole-edge stress concentration is always a serious phenomenon. And the phenomenon makes the structure strength decrease very quickly to form dangerous weak points. Most partial damage begins from these weak points. According to the complex variable functions theory, the accurate boundary condition of composite plate with different hole-shapes is founded by conformal mapping method to settle the boundary condition problem of complex hole-shapes. Composite plate with commonly hole-shapes in engineering is studied by several complex variable stress fimction. The boundary integral equations are founded based on exact boundary conditions. Then the exact hole-edge stress analytic solution of composite plate with rectangle holes and wing manholes is resolved. Both of offset axis loadings and its influences on the stress concentration coefficient of the hole-edge are discussed. And comparisons of different loads along various offset axis on the hole-edge stress distribution of orthotropic plate with rectangle hole or wing manhole are made. It can be concluded that hole-edge with continuous variable curvatures might help to decrease the stress concentration coefficient; and smaller angle of outer load and fiber can decrease the stress peak value.

Exact solutions of two semi-infinite collinear cracks in piezoelectric strip

Using the complex variable function method and the conformal mapping technique, the fracture problem of two semi-infinite collinear cracks in a piezoelectric strip is studied under the anti-plane shear stress and the in-plane electric load on the partial crack surface. Analytic solutions of the field intensity factors and the mechanical strain energy release rate are derived under the assumption that the surfaces of the crack are electrically impermeable. The results can be reduced to the well-known solutions for a purely elastic material in the absence of an electric load. Moreover, when the distance between the two crack tips tends to infinity, analytic solutions of a semi-infinite crack in a piezoelectric strip can be obtained. Numerical examples are given to show the influence of the loaded crack length, the height of the strip, the distance between the two crack tips, and the applied mechanical/electric loads on the mechanical strain energy release rate. It is shown that the material is easier to fail when the distance between two crack tips becomes shorter, and the mechanical/electric loads have greater influence on the propagation of the left crack than those of the right one.

FRACTURE CALCULATION OF BENDING PLATES BY BOUNDARY COLLOCATION METHOD

Fracture of Kirchhoff plates is analyzed by the theory of complex variables and boundary collocation method. The deflections, moments and shearing forces of the plates are assumed to be the functions of complex variables. The functions can satisfy a series of basic equations and governing conditions, such as the equilibrium equations in the domain, the boundary conditions on the crack surfaces and stress singularity at the crack tips. Thus, it is only necessary to consider the boundary conditions on the external boundaries of the plate, which can be approximately satisfied by the collocation method and least square technique. Different boundary conditions and loading cases of the cracked plates are analyzed and calculated. Compared to other methods, the numerical examples show that the present method has many advantages such as good accuracy and less computer time. This is an effective semi_analytical and semi_numerical method.

THE EXTENDED JORDAN'S LEMMA AND THE RELATION BETWEEN LAPLACE TRANSFORM AND FOURIER TRANSFORM

Jordan's lemma can be used for a wider range than the original one. The extended Jordan's lemma can be described as follows. Let f(z) be analytic in the upper half of the z plane (Imz≥0), with the exception of a finite number of isolated singularities, and for P>o, if then where z=Rei and CR is the open semicircle in the upper half of the z plane.With the extended Jordan's lemma one can find that Laplace transform and Fourier transform are a pair of integral transforms which relate to each other.

Green's function for T-stress of semi-infinite plane crack

Green’s function for the T-stress near a crack tip is addressed with an analytic function method for a semi-infinite crack lying in an elastical, isotropic, and infinite plate. The cracked plate is loaded by a single inclined concentrated force at an interior point. The complex potentials are obtained based on a superposition principle, which provide the solutions to the plane problems of elasticity. The regular parts of the potentials are extracted in an asymptotic analysis. Based on the regular parts, Green’s function for the T-stress is obtained in a straightforward manner. Furthermore, Green’s functions are derived for a pair of symmetrically and anti-symmetrically concentrated forces by the superimposing method. Then, Green’s function is used to predict the domain-switch-induced T-stress in a ferroelectric double cantilever beam （DCB） test. The T-stress induced by the electromechanical loading is used to judge the stable and unstable crack growth behaviors observed in the test. The prediction results generally agree with the experimental data.