Proportion Integration Differentiation(PID)Control Strategy of Belt Sander Based on Fuzzy Algorithm

Aiming at solving the problems of response lag and lack of precision and stability in constant grinding force control of industrial robot belts,a constant force control strategy combining fuzzy control and proportion integration differentiation(PID)was proposed by analyzing the signal transmission process and the dynamic characteristics of the grinding mechanism.The simulation results showed that compared with the classical PID control strategy,the system adjustment time was shortened by 98.7%,the overshoot was reduced by 5.1%,and the control error was 0.2%-0.5%when the system was stabilized.The optimized fuzzy control system had fast adjustment speeds,precise force control and stability.The experimental analysis of the surface morphology of the machined blade was carried out by the industrial robot abrasive grinding mechanism,and the correctness of the theoretical analysis and the effectiveness of the control strategy were verified.

Fuzzy Self-adaptive Proportional Integration Differential Control for Attitude Stabilization of Quadrotor UAV

The technology of attitude control for quadrotor unmanned aerial vehicles(UAVs) is one of the most important UAVs' research areas.In order to achieve a satisfactory operation in quadrotor UAVs having proportional integration differential(PID) controllers,it is necessary to appropriately adjust the controller coefficients which are dependent on dynamic parameters of the quadrotor UAV and any changes in parameters and conditions could affect desired performance of the controller.In this paper,combining with PID control and fuzzy logic control,a kind of fuzzy self-adaptive PID control algorithm for attitude stabilization of the quadrotor UAV was put forward.Firstly,the nonlinear model of six degrees of freedom(6-DOF) for quadrotor UAV is established.Secondly,for obtaining the attitude of quadrotor,attitude data fusion using complementary filtering is applied to improving the measurement accuracy and dynamic performance.Finally,the attitude stabilization control simulation model of the quadrotor UAV is build,and the self-adaptive fuzzy parameter tuning rules for PID attitude controller are given,so as to realize the online self-tuning of the controller parameters.Simulation results show that comparing with the conventional PID controller,this attitude control algorithm of fuzzy self-adaptive PID has a better dynamic response performance.

Adaptive proportional integral differential control based on radial basis function neural network identification of a two-degree-of-freedom closed-chain robot

A closed-chain robot has several advantages over an open-chain robot, such as high mechanical rigidity, high payload, high precision. Accurate trajectory control of a robot is essential in practical-use. This paper presents an adaptive proportional integral differential （PID） control algorithm based on radial basis function （RBF） neural network for trajectory tracking of a two-degree-of-freedom （2-DOF） closed-chain robot. In this scheme, an RBF neural network is used to approximate the unknown nonlinear dynamics of the robot, at the same time, the PID parameters can be adjusted online and the high precision can be obtained. Simulation results show that the control algorithm accurately tracks a 2-DOF closed-chain robot trajectories. The results also indicate that the system robustness and tracking performance are superior to the classic PID method.

Design of a Proportional-Integral-Derivative Controller for an Automatic Generation Control of Multi-area Power Thermal Systems Using Firefly Algorithm

Essentially, it is significant to supply the consumer with reliable and sufficient power. Since, power quality is measured by the consistency in frequency and power flow between control areas. Thus, in a power system operation and control,automatic generation control(AGC) plays a crucial role. In this paper, multi-area(Five areas: area 1, area 2, area 3, area 4 and area 5) reheat thermal power systems are considered with proportional-integral-derivative(PID) controller as a supplementary controller. Each area in the investigated power system is equipped with appropriate governor unit, turbine with reheater unit, generator and speed regulator unit. The PID controller parameters are optimized by considering nature bio-inspired firefly algorithm(FFA). The experimental results demonstrated the comparison of the proposed system performance(FFA-PID)with optimized PID controller based genetic algorithm(GAPID) and particle swarm optimization(PSO) technique(PSOPID) for the same investigated power system. The results proved the efficiency of employing the integral time absolute error(ITAE) cost function with one percent step load perturbation(1 % SLP) in area 1. The proposed system based FFA achieved the least settling time compared to using the GA or the PSO algorithms, while, it attained good results with respect to the peak overshoot/undershoot. In addition, the FFA performance is improved with the increased number of iterations which outperformed the other optimization algorithms based controller.

Fuzzy PID control system for hose pulse experiment based on LabVIEW

The hose pulse testing bench generally uses electro-hydraulic servo system. It occupies little space, tracks signals fast and has simple structure, and therefore it is widely used in industrial control field. However, there are lots of problems such as little accuracy and instability caused by slow response of hydraulic and various interference factors. Simple proportional integra- tion derivatiation （PID） control method of traditional pulse bench is simple in principle, but it is difficult in parameter adjust- ment. According to the special requirements of the control system, a PID method based on fuzzy control is proposed in the pa- per. This method not only retains the advantages of the conventional control system, but also ameliorates the drawbacks of parameter uncertainty, instability and lag. It has been testified that the method is practicable and can improve the precision and adaptation.

PID-Based Bit Allocation Strategy for Asymmetric Stereoscopic Video Coding with Fuzzy Quality Controller

Asymmetric stereoscopic video coding can take advantage of binocular suppression in human vision by representing one of the two views in lower quality.This paper proposes a bit allocation strategy for asymmetric stereoscopic video coding.In order to improve the accuracy of bit allocation and rate control in the left view,a proportionalintegral-derivative controller is adopted.Meanwhile,to control the quality fluctuation between consecutive frames of the left view,a quality controller is adopted.Besides,a fuzzy controller is proposed to control the variation in quality between the left and right views by comparing the PSNR disparity of two views with a fixed threshold,which is used to quantize the binocular psycho-visual redundancy and adjust the quantization parameter (QP) of the right view correspondingly.The proposed algorithm has been implemented in H.264/AVC video codec,and the experimental results show its effectiveness in rate control while keeping a good quality for the left view,and fewer bits are allocated for the right view so that the overall bit rate is saved by 7.2% at most without the loss of subjective visual quality for stereoscopic video.

基于改进麻雀优化PID的波浪补偿控制方法

随着海上风电“十四五”规划的不断推动,在深远海域对兆瓦级大功率海上风机的需求量随之增加,其规模也在不断扩大。但是,在吊运、安装等海上工作过程中,复杂海浪对船舶产生的持续影响导致风机安装的精度和效率大幅下降,甚至会对人员安全以及财产造成重大损失。在深远海域复杂海况下对工程船舶进行有效的波浪补偿,可提供稳定的作业环境以保证精准高效地完成各项工作,因此,本文提出了一种基于改进麻雀优化PID的波浪补偿控制方法并将其应用于Stewart补偿平台。首先,建立波浪补偿平台动力学以及运动学反解模型,并设计正解模型迭代求解算法。随后,使用PID进行波浪补偿控制,并通过麻雀搜索算法优化参数。接着,采用Circle混沌映射对其进行初始化分布,以解决初始化不均匀的问题;并采用动态自适应加权、柯西突变以及反向学习以提升算法全局寻优能力。最后,生成4~6级海况下的某工程船运动数据作为系统输入,利用MATLAB和Simulink软件平台搭建模型进行补偿控制验证,并在Stewart硬件平台上做补偿试验。结果表明,改进麻雀搜索算法具有较快的收敛速度、较高的精度和更好的寻优能力,优化后的PID控制方法更适合用于复杂海况下波浪补偿平台的控制优化,可为大功率海上风机安装的补偿平台控制系统设计提供参考。

数控压机伺服控制系统复合控制器I-ABC与PID优化

为了提高数控压机伺服控制系统的控制精度,针对伺服控制系统运行控制过程构建数学模型,在人工蜂群算法基础上融入了云分析模型,之后采用改进人工蜂群算法(Improved Artificial Bee Colony,I-ABC)调节比例-积分-微分(Proportional Integral Differential,PID)参数,建立了一种复合控制方法。研究结果表明:以I-ABC进行PID控制时,可以使幅度差降低到0.4%,相位差基本在-0.54°之内,系统加载精度也获得了明显提升,表现出了更优的跟踪性能。以I-ABC进行PID控制时,能够对多余力起到明显抑制作用,响应速度也获得明显提升,可以有效满足系统的准确控制要求。在系统内加入干扰信号,引入I-ABC实施PID调节可以减小系统超调量,还可以获得更短调节时间,使系统获得更强抗干扰性能。

基于模糊PID汽车变速箱自动控制方法

为改善汽车变速箱的目标速度跟踪水平,提升汽车的动力性,基于模糊PID汽车变速箱自动控制方法,确定汽车行驶的目标车速,计算目标车速与实际车速之间的偏差,以及速度偏差的变化率,将上述结果作为PID控制器的输入,利用参数整定后的PID控制器,确定汽车变速箱的控制变量,控制汽车传动机构输出理想车速。实验结果表明,汽车以阶跃信号、斜坡信号和正弦信号状态行驶时,该方法均可以精准跟踪汽车变速箱的速比,控制效果与动态跟踪性能优异,为保持汽车的最佳动力性能提供了良好的控制策略。

Improved single-neuron PID controller for DC motor applied in robot system

An improved single-neuron proportional integral derivative （ PID ） controller and a new method to build the DC motor system were presented in the article. In the simulation, the robot arm is considered as an external load to DC motor. Both the motor module and the load module are crea- ted in Simulink to achieve simulation results closer to real robot system. In this way, it can well veri- fy the performance of the improved single-neuron PID controller, which is a combined controller of normal PID controller and single-neuron PID controller. Besides, an intelligent switcher can help to realize the function of choosing a better control algorithm according to motor＇ s velocity output. Sim- ulated results confirm the rapid and stable response of the improved PID controller. Moreover, the improved single-neuron PID controller has an excellent ability to overcome the load impact and su- press the jamming signals. At last, a GUI interface platform is built to make the controller easier to be applied in other robot systems.

Parallel Fuzzy P+Fuzzy I+Fuzzy D Controller:Design and Performance Evaluation

In this paper, a parallel fuzzy proportional plus fuzzy integral plus fuzzy derivative （FP＋FI＋FD） controller is proposed. It is derived from the conventional parallel proportional-integral-derivative （PID） controller. It preserves the linear structure of a conventional parallel PID controller, with analytical formulas. The final shape of the controller is a discrete-time fuzzy version of a conventional parallel PID controller. Computer simulations are performed to evaluate the performance of the FP＋FI＋FD controller for setpoint tracking and load-disturbance rejection for some complex processes, such as first- and second-order processes with delay, inverse response process with and without delay and higher order processes. Also, the performance of the proposed fuzzy controller is evaluated experimentally on highly nonlinear liquid-flow process with a hysteresis characteristic due to a pneumatic control valve. The simulation and real time control is done using National InstrumentTM hardware and software （LabVIEWTM）. The response of the FP＋FI＋FD controller is compared with the conventional parallel PID controller, tuned with the Ziegler-Nichols （Z-H） and /~strSm- H^gglund （A-H） tuning technique. It is observed that the FP＋FI＋FD controller performed much better than the conventional PI/PID controller. Simulation and experimental results demonstrate the effectiveness of the proposed parallel FP＋FI＋FD controller.

Design of Nichols PID Controller for Load Frequency Control

为解决互联水电系统负荷频率控制（load frequencycontrol,LFC）问题,及保持互联电网系统频率、联络线功率及区域控制误差（area control error,ACE）的稳定,根据闭环系统谐振峰值与系统响应最大峰值之间的关系,构建一个与系统参数及控制器参数都相关的优化问题,通过该问题的求解获得控制器参数与系统参数之间的数学关系,针对水轮发电系统非最小相位特性,通过串加比例–微分（proportional-derivative,PD）控制方式降低系统阶次,设计尼科尔斯（Nichols）曲线的比例–积分–微分（proportional-integral-derivative,PID）控制器。基于模型参数扰动和负荷干扰的仿真结果表明：尼科尔斯PID控制器能快速调整系统频率偏差、联络线功率偏差及ACE为0,具有良好的鲁棒性能和抗负荷干扰性能,系统过渡过程性能明显优于传统PID调节器结果。

Interval Type-2 Fuzzy Hierarchical Adaptive Cruise Following-Control for Intelligent Vehicles

Intelligent vehicles can effectively improve traffic congestion and road traffic safety.Adaptive cruise followingcontrol(ACFC)is a vital part of intelligent vehicles.In this paper,a new hierarchical vehicle-following control strategy is presented by synthesizing the variable time headway model,type-2 fuzzy control,feedforward+fuzzy proportion integration(PI)feedback(F+FPIF)control,and inverse longitudinal dynamics model of vehicles.Firstly,a traditional variable time headway model is improved considering the acceleration of the lead car.Secondly,an interval type-2 fuzzy logic controller(IT2 FLC)is designed for the upper structure of the ACFC system to simulate the driver's operating habits.To reduce the nonlinear influence and improve the tracking accuracy for the desired acceleration,the control strategy of F+FPIF is given for the lower control structure.Thirdly,the lower control method proposed in this paper is compared with the fuzzy PI control and the traditional method(no lower controller for tracking desired acceleration)separately.Meanwhile,the proportion integration differentiation(PID),linear quadratic regulator(LQR),subsection function control(SFC)and type-1 fuzzy logic control(T1 FLC)are respectively compared with the IT2 FLC in control performance under different scenes.Finally,the simulation results show the effectiveness of IT2 FLC for the upper structure and F+FPIF control for the lower structure.

基于改进MPC与RBF-PID的智能车轨迹跟踪控制

为提升智能汽车轨迹跟踪控制的稳定性和精度,提出一种基于时域参数自适应MPC与RBF-PID的轨迹跟踪控制方法.首先搭建车辆横纵向动力学模型;其次分析控制时域与预测时域对跟踪精度的影响,设计时域参数自适应MPC横向控制器并进行仿真验证;然后基于径向基函数(RBF)神经网络整定PID控制参数,设计分层式纵向控制器,并设计折线速度曲线与PID算法进行对比;最后以车速为耦合点构建智能汽车横纵向综合控制系统,并在蛇形工况下对横纵向综合控制系统进行仿真实验.结果表明,所设计的横向控制器能保证低速时的跟踪精度和高速时的车辆稳定性,纵向控制器可有效提高速度跟踪精度,横纵向综合控制系统能实现车辆在变车速工况下对轨迹的精准跟踪,同时保证良好的行驶稳定性与舒适性.

基于麻雀搜索算法优化的模糊PID控制方法研究

为解决肥料和水的配比过程中,酸碱度(pH)和电导率(EC)的稳态时间长、超调量大等问题,在模糊PID控制的基础上融合麻雀搜索算法对控制器的三个增益参数(比例、积分、微分)进行有效优化。在MATLAB/Simulink下分别做传统PID控制pH和EC值的仿真试验、模糊PID控制pH和EC值的仿真试验以及基于麻雀搜索算法优化的模糊PID控制pH和EC值的仿真试验,将三者仿真试验中pH和EC值的稳定时间以及超调量进行对比。试验结果表明:基于麻雀搜索算法优化的模糊PID控制与传统的PID控制相比,酸碱度和电导率的稳定时间分别减少475 s和261 s,超调量分别减少5.4%和12.19%,与模糊PID控制相比,酸碱度和电导率的稳定时间分别减少356 s和95 s,超调量分别减少1.4%和2.34%。所提出的控制方法能够使系统具有更小的超调量和更快地达到上升稳态时间,可以精准的控制肥料和水的配比。

基于改进DDPG-PID的芯片共晶键合温度控制

芯片共晶键合对加热过程中的升温速率、保温时间和温度精度要求较高,在使用传统的比例-积分-微分(PID)温度控制方法时,存在响应时间过长、超调量过大、控制温度不够准确等问题。针对共晶加热台的温度控制问题,提出了一种基于改进的深度确定性策略梯度(DDPG)强化学习算法优化PID参数的控制方法,采用分类经验回放的思想,以奖励值大小为标准对经验进行分类存放,根据智能体当前的状态和下一步动作,从相应的经验池中进行采样并训练,并根据PID控制算法的特性设计了合理的奖励函数,改善了强化学习中奖励稀疏的问题,提高了算法的收敛速度与性能。仿真结果表明,与传统PID控制、常规DDPG-PID控制相比,改进DDPG-PID控制缩短了响应时间,降低了超调量,近乎消除了稳态误差,提高了控制性能和系统稳定性。

基于MPC和PID的脚轮式全向移动平台轨迹跟踪

针对现有运动控制策略无法保证独立驱动脚轮式全向移动平台位姿的高精度控制问题,提出一种基于模型预测控制(MPC)和PID控制相结合的双闭环轨迹跟踪控制策略。首先,利用运动学几何关系建立独立驱动脚轮式全向移动平台在世界坐标系下的三自由度运动学模型,基于正交分解法建立平台在机器人坐标系下的逆运动学模型,以反映平台中心点速度与各个脚轮转速间的关系;其次,采用MPC并基于三自由度运动学模型设计位姿控制器,使平台对期望轨迹进行位姿跟踪,并在考虑多目标约束条件的情况下通过位姿控制器求解出最优控制量;最后,采用PID设计速度控制器,用于跟踪位姿控制器输出的期望速度,通过平台逆运动学模型计算得到期望轮速,从而驱动平台实现全向运动。通过仿真验证了所提控制策略的有效性,平台能有效跟踪直线轨迹和圆形轨迹。仿真结果表明,与通过平台转角逆运动学模型解耦驱动轮速的位置单环轨迹跟踪控制策略相比,加入速度内环后系统超调量下降97.23%,响应时间缩短36.84%。

爆胎车辆稳定性控制的模糊PID控制研究

为了使汽车在爆胎后能继续维持爆胎前的行驶状态,对其稳定性控制做了一些研究工作。首先,建立轮胎模型,汽车二自由度理想模型、七自由度实际模型。其次,将FPID运用在爆胎汽车的稳定性控制上,以两模型的横摆角速度偏差(E)及偏差变化率(EC)作为FPID控制器的输入,决策出用以维持爆胎汽车的稳定性的最优附加横摆力矩。最后对所提的FPID控制进行仿真验证。结果表明:FPID控制可以降低爆胎汽车横摆角速度的变化幅度,保证了高速行驶中爆胎车辆的稳定性。

基于粒子群优化的模糊PID阀控液压缸控制仿真

为了提高比例阀控液压缸的控制效能和精度,针对比例阀控液压缸存在响应速度慢、跟踪精度低等问题,提出了一种粒子群优化(Particle Swarm Optimization,PSO)模糊PID参数的方法。建立AMESim-Simulink联合仿真平台,采用了基于粒子群优化的模糊PID控制算法,针对比例阀控液压缸系统,使用粒子群算法对模糊PID进行参数调优,并运用AMESim-Simulink联合仿真平台进行模拟实验。模拟实验验证了基于粒子群优化的模糊PID控制器提高了系统的响应速度,减小了超调量,提高了稳定性。

基于改进跟踪微分器与前馈的模糊自适应PID控制

经典PID控制器在工程领域应用广泛,但其快速性和超调量之间不能很好地实现协调控制,且误差信号在经典意义上不可微,导致微分难以被有效利用。基于此,在典型跟踪微分器研究的基础上,采用一种具有良好的动态响应和滤波功能的改进非线性跟踪微分器对输入信号进行快速、无超调跟踪。并结合前馈控制和模糊自适应PID控制提升系统的稳定性和快速性,设计了一种基于改进跟踪微分器与前馈的模糊自适应PID控制器。以移相全桥变换器为控制对象,用经典PID与其进行对比分析。仿真与实验波形分析发现,所提控制器的鲁棒性更高,同时可将调节时间缩短至40%,响应速度也更快。