Winter wheat yield improvement by genetic gain across different provinces in China

The replacement of winter wheat varieties has contributed significantly to yield improvement worldwide,with remarkable progress in China.Drawing on two sets of data,production yield from the National Bureau of Statistics of China and experimental yield from literature,this study aims to(1)illustrate the increasing patterns of production yield among different provinces from 1978 to 2018 in China,(2)explore the genetic gain in yield and yield relevant traits through the variety replacement based on experimental yield from 1937 to 2016 in China,and(3)compare the yield gap between experimental yield and production yield.The results show that both the production and experimental yields significantly increased along with the variety replacement.The national annual yield increase ratio for the production yield was 1.67%from 1978 to 2018,varying from 0.96%in Sichuan Province to 2.78%in Hebei Province;such ratio for the experimental yield was 1.13%from 1937 to 2016.The yield gap between experimental and production yields decreased from the 1970s to the 2010s.This study reveals significant increases in some yield components consequent to variety replacement,including thousand-grain weight,kernel number per spike,and grain number per square meter;however,no change is shown in spike number per square meter.The biomass and harvest index consistently and significantly increased,whereas the plant height decreased significantly.

Preweaning period is a critical window for rumen microbial regulation of average daily gain in Holstein heifer calves

Background Rumen bacterial groups can affect growth performance,such as average daily gain(ADG),feed intake,and efficiency.The study aimed to investigate the inter-relationship of rumen bacterial composition,rumen fermentation indicators,serum indicators,and growth performance of Holstein heifer calves with different ADG.Twelve calves were chosen from a trail with 60 calves and divided into higher ADG(HADG,high pre-and post-weaning ADG,n=6)and lower ADG(LADG,low pre-and post-weaning ADG,n=6)groups to investigate differences in bacterial composition and functions and host phenotype.Results During the preweaning period,the relative abundances of propionate producers,including g_norank_f_Butyricicoccaceae,g_Pyramidobacter,and g_norank_f_norank_o_Clostridia_vadin BB60_group,were higher in HADG calves(LDA>2,P<0.05).Enrichment of these bacteria resulted in increased levels of propionate,a gluconeogenic precursor,in preweaning HADG calves(adjusted P<0.05),which consequently raised serum glucose concentrations(adjusted P<0.05).In contrast,the relative abundances of rumen bacteria in post-weaning HADG calves did not exert this effect.Moreover,no significant differences were observed in rumen fermentation parameters and serum indices between the two groups.Conclusions The findings of this study revealed that the preweaning period is the window of opportunity for rumen bacteria to regulate the ADG of calves.

Topological laser on square lattice with gain–loss-induced higher-order corner modes

We investigate the higher-order topological laser in the two-dimensional(2D) coupled-cavity array. By adding staggered on-site gain and loss to the 2D Hermitian array with a trivial phase, the system will emerge degenerate topological corner modes, which are protected by bulk band gap. For such a non-Hermitian model, by adjusting the parameters of the system and introducing the pumping into the cavity at the corner, a single-mode lasing with topological protection emerges.Furthermore, single-mode lasing exists over a wide range of pumping strengths. No matter where the cavity is initially stimulated, after enough time evolution, all the cavities belonging to the topological corner mode can emit a stable laser.

A Stroke-Limitation AMD Control System with Variable Gain and Limited Area for High-Rise Buildings

Collisions between a moving mass and an anti-collision device increase structural responses and threaten structural safety.An active mass damper(AMD)with stroke limitations is often used to avoid collisions.However,a strokelimited AMD control system with a fixed limited area shortens the available AMD stroke and leads to significant control power.To solve this problem,the design approach with variable gain and limited area(VGLA)is proposed in this study.First,the boundary of variable-limited areas is calculated based on the real-time status of the moving mass.The variable gain(VG)expression at the variable limited area is deduced by considering the saturation of AMD stroke.Then,numerical simulations of a stroke-limited AMD control system with VGLA are conducted on a high-rise building structure.These numerical simulations show that the proposed approach has superior strokelimitation performance compared with a stroke-limited AMD control system with a fixed limited area.Finally,the proposed approach is validated through experiments on a four-story steel frame.

基于GAIN-LSTM网络的雷达PRI序列还原及识别方法

开展脉冲重复间隔(Pulse Repetition Interval,PRI)模式识别工作是电子支援系统的一项重要任务。现代复杂电磁环境下,受雷达辐射源部署和接收设备本身影响,雷达脉冲丢失率极高,导致分选后PRI序列调制规律被破坏,现有的PRI模式识别方法准确率不足。针对上述问题,从PRI序列还原角度出发,并结合PRI序列本质是时序序列的特点,提出GAIN-LSTM(Generative Adversarial Imputation Nets and Long Short Term Memory)网络架构,其先对丢失脉冲位置进行补全操作,恢复PRI调制规律,然后对还原后PRI序列进行调制模式识别。仿真结果表明,提出的GAIN-LSTM网络架构在脉冲丢失率70%时仍保持95%的正确识别率。

ANovel Non-Isolated Cubic DC-DC Converter with High Voltage Gain for Renewable Energy Power Generation System

In recent years,switched inductor(SL)technology,switched capacitor(SC)technology,and switched inductor-capacitor(SL-SC)technology have been widely applied to optimize and improve DC-DC boost converters,which can effectively enhance voltage gain and reduce device stress.To address the issue of low output voltage in current renewable energy power generation systems,this study proposes a novel non-isolated cubic high-gain DC-DC converter based on the traditional quadratic DC-DC boost converter by incorporating a SC and a SL-SC unit.Firstly,the proposed converter’s details are elaborated,including its topology structure,operating mode,voltage gain,device stress,and power loss.Subsequently,a comparative analysis is conducted on the voltage gain and device stress between the proposed converter and other high-gain converters.Then,a closed-loop simulation system is constructed to obtain simulation waveforms of various devices and explore the dynamic performance.Finally,an experimental prototype is built,experimental waveforms are obtained,and the experimental dynamic performance and conversion efficiency are analyzed.The theoretical analysis’s correctness is verified through simulation and experimental results.The proposed converter has advantages such as high voltage gain,low device stress,high conversion efficiency,simple control,and wide input voltage range,achieving a good balance between voltage gain,device stress,and power loss.The proposed converter is well-suited for renewable energy systems and holds theoretical significance and practical value in renewable energy applications.It provides an effective solution to the issue of low output voltage in renewable energy power generation systems.

Design of a Low Power Low-Noise Amplifier with Improved Gain/Noise Ratio

This work details the development of a broad-spectrum LNA (Low Noise Amplifier) circuit using a 65 nm CMOS technology. The design incorporates an inductive degeneracy circuit, employing a theoretical approach to enhance gain, minimize noise levels, and uphold low power consumption. The progression includes a shift to a cascode structure to further refine LNA parameters. Ultimately, with a 1.8 V bias, the achieved performance showcases a gain-to-noise figure ratio of 16 dB/0.5 dB, an IIP3 linearity at 5.1 dBm, and a power consumption of 3 mW. This architecture is adept at operating across a wide frequency band spanning from 0.5 GHz to 6 GHz, rendering it applicable in diverse RF scenarios.

Joint Beamforming Design for Dual-Functional Radar-Communication Systems Under Beampattern Gain Constraints

The joint beamforming design challenge for dual-functional radar-communication systems is addressed in this paper.The base station in these systems is tasked with simultaneously sending shared signals for both multi-user communication and target sensing.The primary objective is to maximize the sum rate of multi-user communication,while also ensuring sufficient beampattern gain at particular angles that are of interest for sensing,all within the constraints of the transmit power budget.To tackle this complex non-convex problem,an effective algorithm that iteratively optimizes the joint beamformers is developed.This algorithm leverages the techniques of fractional programming and semidefinite relaxation to achieve its goals.The numerical results confirm the effectiveness of the proposed algorithm.

Analysis of the Effects of Maternal Body Mass Index and Gestational Weight Gain on Maternal and Neonatal Outcomes in Twin Pregnancy

Objective:To investigate the effects of maternal body mass index(BMI)and gestational weight gain on maternal and neonatal outcomes in twin pregnancies.Methods:Five hundred cases of twin pregnancies were divided into a low body weight group(68 cases),a normal weight group(355 cases),an overweight group(65 cases),and an obesity group(12 cases)according to the World Health Organization(WHO)Body Mass Index(BMI)classification guidelines Results:Comparison of weight gain during different pregnancies revealed that pregnant women were mainly of low weight and average weight.The higher the BMI before pregnancy,the higher the incidence of excessive weight gain during pregnancy.The incidences of gestational diabetes mellitus(GDM)and premature rupture of membranes in women with low weight gain were significantly higher than those in women with average weight gain and high weight gain(P<0.05).The incidences of gestational hypertension,preeclampsia,and anemia in women with high weight gain were significantly higher than those in women with low weight gain and average weight gain(P<0.05).The incidence of neonatal birth weight,fetal distress,and macrosomia in the high weight gain group was significantly higher than those in the low weight gain and average weight gain groups(P<0.05).The birth weight of newborns in low-weight gain mothers was significantly lower than that of normal-weight gain mothers(P<0.05).Conclusion:Poor maternal and infant outcomes were common in women with insufficient or excessive weight gain during pregnancy.Therefore,for women with twin pregnancies,weight management is crucial to ensure maternal and infant health.

Genetic gain and inbreeding from simulation of different genomic mating schemes for pig improvement

Background Genomic selection involves choosing as parents those elite individuals with the higher genomic estimated breeding values(GEBV)to accelerate the speed of genetic improvement in domestic animals.But after multi-generation selection,the rate of inbreeding and the occurrence of homozygous harmful alleles might increase,which would reduce performance and genetic diversity.To mitigate the above problems,we can utilize genomic mating(GM)based upon optimal mate allocation to construct the best genotypic combinations in the next generation.In this study,we used stochastic simulation to investigate the impact of various factors on the efficiencies of GM to optimize pairing combinations after genomic selection of candidates in a pig population.These factors included:the algorithm used to derive inbreeding coefficients;the trait heritability(0.1,0.3 or 0.5);the kind of GM scheme(focused average GEBV or inbreeding);the approach for computing the genomic relationship matrix(by SNP or runs of homozygosity(ROH)).The outcomes were compared to three traditional mating schemes(random,positive assortative or negative assortative matings).In addition,the performance of the GM approach was tested on real datasets obtained from a Large White pig breeding population.Results Genomic mating outperforms other approaches in limiting the inbreeding accumulation for the same expected genetic gain.The use of ROH-based genealogical relatedness in GM achieved faster genetic gains than using relatedness based on individual SNPs.The GROH-based GM schemes with the maximum genetic gain resulted in 0.9%-2.6%higher rates of genetic gainΔG,and 13%-83.3%lowerΔF than positive assortative mating regardless of heritability.The rates of inbreeding were always the fastest with positive assortative mating.Results from a purebred Large White pig population,confirmed that GM with ROH-based GRM was more efficient than traditional mating schemes.Conclusion Compared with traditional mating schemes,genomic mating can not only achieve sustainable genetic progress but also effectively control the rates of inbreeding accumulation in the population.Our findings demonstrated that breeders should consider using genomic mating for genetic improvement of pigs.

Oneε-Ga_(2)O_(3)-based solar-blind Schottky photodetector emphasizing high photocurrent gain and photocurrent-intensity linearity

Theε-Ga_(2)O_(3) thin film was grown on sapphire substrate by using metalorganic chemical vapor deposition(MOCVD)method,and then was used to fabricate a deep-ultraviolet(DUV)photodetector(PD).Theε-Ga_(2)O_(3) thin film shown good crystal quality and decent surface morphology.Irradiated by a 254-nm DUV light,the photodetector displayed good optoelectronic performance and high wavelength selectivity,such as photoresponsivity(R)of 175.69 A/W,detectivity(D*)of 2.46×10^(15) Jones,external quantum efficiency(EQE)of 8.6×10^(4)%and good photocurrent-intensity linearity,suggesting decent DUV photosensing performance.At 5 V and under illumination with light intensity of 800μW/cm2,the photocurrent gain is as high as 859 owing to the recycling gain mechanism and delayed carrier recombination;and the photocurrent gain decreases as the incident light intensity increases because of the recombination of photogenerated carriers by the large photon flux.

Intoxication Induced by Urea Containing Diets in Broiler Chickens: Effect on Weight Gain, Feed Conversion Ratio, Hematological and Biochemical Profiles

Urea as a source of cheap non-protein nitrogen is used to adulterate fish and meat meals which are basic components of broiler diets. The present study was carried out to elucidate the effects of urea on weight gain, and hematological and biochemical profiles. A total of 48 broiler chicks were randomly allotted into 4 groups, designated Groups 1, 2, 3 and 4 of 12 birds each. Birds in Groups 2, 3 and 4 were fed on diets containing urea at the levels of 1%, 2.5% and 4%, respectively. Birds in Group 1 served as control and were not exposed to urea. Experimentation period was for 3 weeks and experiment was terminated when birds were 42 days of age. Body weight of all intoxicated birds at the various intervals was significantly decreased in comparison with that of the untreated control. Compared with control, all intoxicated broilers manifested significant (P ≤ 0.05) decrease in all hematological parameters involving erythrocytic and total leucocytic counts, Hemoglobin (Hb) and Packed Cell Volume (PCV) on a dose- and time-pattern. In comparison with the control levels, biochemical profile of the intoxicated birds disclosed significant decrease in blood glucose level and significant increase in serum uric acid, urea, Alkaline Phosphatase (ALP) and Lactate Dehydrogenase (LDH) levels. Based upon the present data, it was concluded that the addition of urea to broiler diets bears serious sequences concerning the general health condition, performance, weight gain, and hematological and biochemical profiles.

Planar InAlAs/InGaAs avalanche photodiode with 360 GHz gain×bandwidth product

This paper describes a guardring-free planar InAlAs/InGaAs avalanche photodiode(APD)by computational simulations and experimental results.The APD adopts the structure of separate absorption,charge,and multiplication(SACM)with top-illuminated.Computational simulations demonstrate how edge breakdown effect is suppressed in the guardringfree structure.The fabricated APD experiment results show that it can obtain a very low dark current while achieving a high gain×bandwidth(GB)product.The dark current is 3 nA at 0.9Vb r,and the unit responsivity is 0.4 A/W.The maximum3 dB bandwidth of 24 GHz and a GB product of 360 GHz are achieved for the fabricated APD operating at 1.55μm.

Fixed-Time Stabilization of a Class of Strict-Feedback Nonlinear Systems via Dynamic Gain Feedback Control

This paper presents a novel fixed-time stabilization control(FSC)method for a class of strict-feedback nonlinear systems involving unmodelled system dynamics.The key feature of the proposed method is the design of two dynamic parameters.Specifically,a set of auxiliary variables is first introduced through state transformation.These variables combine the original system states and the two introduced dynamic parameters,facilitating the closed-loop system stability analyses.Then,the two dynamic parameters are delicately designed by utilizing the Lyapunov method,ensuring that all the closed-loop system states are globally fixed-time stable.Compared with existing results,the“explosion of complexity”problem of backstepping control is avoided.Moreover,the two designed dynamic parameters are dependent on system states rather than a time-varying function,thus the proposed controller is still valid beyond the given fixedtime convergence instant.The effectiveness of the proposed method is demonstrated through two practical systems.

High gain and circularly polarized substrate integrated waveguide cavity antenna array based on metasurface

Two substrate integrated waveguide(SIW) cavity antenna arrays based on metasurface are proposed in this paper. By rotating the metasurface element, circularly polarized and high gain antennas are achieved respectively. Firstly, multi-mode resonance theory is employed to broaden the bandwidth of the slot antenna. And then, an SIW cavity composed of 4×4 cornercut elements is added on the top of the slot antenna to achieve the circular polarization and improve the front-to-back ratio. Thirdly, the metasurface elements are sequentially rotated and a high gain antenna with 2-dBi enhancement on average in the operation band is obtained. Based on the two antenna units, two 2×2 antenna arrays are designed. The circularly polarized and high gain antenna arrays are both fabricated to verify the correctness. Furthermore, the novel wideband phase shifter is employed in the circularly polarized antenna to obtain an operating bandwidth of 38%(4.05 GHz–5.95 GHz)and AR bandwidth of 24.9%(4.4 GHz–5.65 GHz). The bandwidth of the high gain antenna can reach 42.7%(3.95 GHz–6.1 GHz) and with the gain enhancement of 2 dBi compared with that of the circularly polarized antenna. The gain remains steady in most of operating band within a variation of 1 dBi. It is remarkable that the rotating of the metasurface element has a great influence on the antenna performance, which provides a new explication for the multi-function antenna design.

Design of a High-Gain 2 × 1 Array Antenna for S-Band Applications

Antennas are an indispensable element in wireless networks. For long-distance wireless communication, antenna gains need to be very strong (highly directive) because the signal from the antenna loses a lot of strength as it travels over long distances. This is true in the military with missile, radar, and satellite systems, etc. Antenna arrays are commonly employed to focus electromagnetic waves in a certain direction that cannot be achieved perfectly with a single-element antenna. The goal of this study is to design a rectangular microstrip high-gain 2 × 1 array antenna using ADS Momentum. This microstrip patch array design makes use of the RT-DUROID 5880 as a substrate with a dielectric constant of 2.2, substrate height of 1.588 mm, and tangent loss of 0.001. To achieve efficient gain and return loss characteristics for the proposed array antenna, RT-Duroid is a good choice of dielectric material. The designed array antenna is made up of two rectangular patches, which have a resonance frequency of 3.3 GHz. These rectangular patches are excited by microstrip feed lines with 13 mm lengths and 4.8 mm widths. The impedance of the patches is perfectly matched by these transmission lines, which helps to get better antenna characteristics. At a resonance frequency of 3.3 GHz, the suggested antenna array has a directivity of 10.50 dB and a maximum gain of 9.90 dB in the S-band. The S parameters, 3D radiation pattern, directivity, gain, and efficiency of the constructed array antenna are all available in ADS Momentum.

Tolerance-enhanced SU(1,1) interferometers using asymmetric gain

SU(1,1) interferometers play an important role in quantum metrology. Previous studies focus on various inputs and detection strategies with symmetric gain. In this paper, we analyze a modified SU(1,1) interferometer using asymmetric gain. Two vacuum states are used as the input and on–off detection is performed at the output. In a lossless scenario,symmetric gain is the optimal selection and the corresponding phase sensitivity can achieve the Heisenberg limit as well as the quantum Cramer–Rao bound. In addition, we analyze the phase sensitivity with symmetric gain in the lossy scenario.The phase sensitivity is sensitive to internal losses but extremely robust against external losses. We address the optimal asymmetric gain and the results suggest that this method can improve the tolerance to internal losses. Our work may contribute to the practical development of quantum metrology.

Mechanisms Influencing Learning Gains Under Information Security: Structural Equation Modeling with Mediating Effect

With the expanding enrollments in higher education,the quality of col-lege education and the learning gains of students have attracted much attention.It is important to study the influencing factors and mechanisms of individual stu-dents’acquisition of learning gains to improve the quality of talent cultivation in colleges.However,in the context of information security,the original data of learning situation surveys in various universities involve the security of educa-tional evaluation data and daily privacy of teachers and students.To protect the original data,data feature mining and correlation analyses were performed at the model level.This study selected 12,181 pieces of data from X University,which participated in the Chinese College Student Survey(CCSS)from 2018 to 2021.A confirmatory factor analysis was conducted and a structural equation modeling was conducted using AMOS 24.0.Through hypothesis testing,this study explored the mechanisms that influence learning gains from the per-spectives of student involvement,teacher involvement,and school support.The results indicated that the quality of student involvement has an important mediat-ing effect on learning gains and that a supportive campus environment has the greatest influence on learning gains.Establishing positive emotional communica-tions between teachers and students is a more direct and effective method than improving the teaching level to improve the quality of student involvement.This study discusses the implications of these results on the research and practice of connotative development in higher education.

Domestic Oral Care Brands Are Regaining Lost Ground

Domestic toothpastes forced to retreat The stories of domestic toothpastes are not as good as soda water. Due to the strength of domestic drinks in recent years, soda water are regaining power. Two Cola brands made other drinks lose grounds in the market. Nowadays, the latest domestic drinks keep emerging and the competition in the market is getting fierce.

A Study on the Efficiency Gain of CsSnGeI3 Solar Cells with Graphene Doping

This paper presents a newly designed ultra-thin, lead-free, and all-inorganic solar cell structure. The structure was optimized using the SCAPS-1D simulator, incorporating solid-state layers arranged as n-graphene/CsSnGeI3/p-graphene. The objective was to investigate the potential of utilizing n-graphene as the electron transport layer and p-graphene as the hole transport layer to achieve maximum power conversion efficiency. Various materials for the electron transport layer were evaluated. The optimized cell structure achieved a maximum power conversion efficiency of 20.97%. The proposed solar cell structure demonstrates promising potential as an efficient, inorganic photovoltaic device. These findings provide important insights for developing and optimizing inorganic photovoltaic cells based on CsSnGeI3, with n-graphene electron transport layers and p-graphene hole transport layers.