Galvanic corrosion behavior of AZ91D alloy/45 steel couple under magnetic field

Galvanic corrosion behavior of AZ91D alloy/45 steel couple in 3.5 wt.%NaCl solution under 0,0.2 and 0.4 T magnetic field were studied by microstructure observation,immersion test and electrochemical measurement.The mixed potential theory was used to estimate the galvanic current density and the mixed potential of the galvanic corrosion between AZ91D alloy and 45 steel.The results indicated that magnetic field could accelerate the corrosion of AZ91D alloy,and impede the corrosion process of 45 steel.The effect of magnetic field on corrosion sensibility and corrosion rate of these two alloys increased as the intensity rising.The galvanic corrosion rate of the couple was accelerated by magnetic field.With the magnetic field intensity rising,the galvanic corrosion sensibility and corrosion rate of the couple increased.The effects of magnetic field on the galvanic corrosion performance of the couple and the corrosion behavior of AZ91D alloy and 45 steel were due to the appearance of field gradient force and magnetohydrodynamic(MHD)force.The mixed potential theory has a certain accuracy to estimate the Ecouple and icouple values in this work.

Electrochemistry and DFT study of galvanic interaction on the surface of monoclinic pyrrhotite(001)and galena(100)

The electrochemical interaction between galena and monoclinic pyrrhotite was investigated to examine its impact on the physical and chemical properties of the mineral micro-surface.This investigation employed techniques such as electrochemistry,metal ion stripping,X-ray photoelectron spectroscopy,and quantum chemistry.The electrochemical test results demonstrate that the galena surface in the electro-couple system exhibits a lower electrostatic potential and higher electrochemical activity compared to the monoclinic pyrrhotite surface,rendering it more susceptible to oxidation dissolution.Monoclinic pyrrhotite significantly amplifies the corrosion rate of the galena surface.Mulliken charge population calculations indicate that electrons are consistently transferred from galena to monoclinic pyrrhotite,with the number of electron transfers on the mineral surface increasing as the interaction distance decreases.The analysis of state density revealed a shift in the surface state density of galena towards lower energy levels,resulting in decreased reactivity and increased difficulty for the reagent to adsorb onto the mineral surface.Conversely,monoclinic pyrrhotite exhibited an opposite trend.The X-ray photoelectron spectroscopy(XPS)test results indicate that galvanic interaction leads to the formation of hydrophilic substances,PbS_(x)O_(y) and Pb(OH)_(2),on the surface of galena.Additionally,the surface of monoclinic pyrrhotite not only adsorbs Pb^(2+)but also undergoes S^(0) formation,thereby augmenting its hydrophobic nature.

Galvanic Skin Response—Extinction Biofeedback Training for Psychogenic Abdominal Pain: A Validation Protocol

Abdominal and pelvic pain of psychogenic origin is a widespread, disabling, difficult to identify, and often inadequately treated medical condition. This condition is often associated with poor quality of life due to high pain interference with daily activities. Cognitive behavioral psychological therapy and neuromodulation with biofeedback are validated therapies for the treatment of this condition. Aim of the present research work is the validation of a therapeutic protocol that involves the use of both techniques in combination. 20 patients diagnosed with psychogenic abdominal pain, of both sexes, aged between 18 and 60 years who had not benefited from pharmacological therapies were enrolled. 10 patients were randomly assigned to the control group (psychological treatment only), another 10 patients were assigned to the study group (neuromodulation with biofeedback-Galvanic skin response-extinction in combination with psychological therapy). For both groups, the pain score, interference of pain with daily living activities, pain relief, and the share of anxiety associated with the pain condition were evaluated (pre- and post-treatment). The patients who underwent the combined treatment achieved statistically significant better scores than patients in the control group, respectively −4.9 ± 0.9 vs −1.0 ± 0.4 for Pain;−5.1 ± 1.1 vs −0.9 ± 0.3 for Interference with life;−7.2 ± 3.7 vs −2.2 ± 2.1 for HAMA;4.6 ± 1.2 vs 1.1 ± 0.6 for Relief.

Galvanic corrosion behavior of copper/titanium galvanic couple in artificial seawater

The corrosion behaviors of copper and copper/titanium galvanic couple （GC） in seawater were studied by electrochemical impedance spectroscopy （EIS） and electrochemical noise （EN） techniques in conjunction with scanning electron microscopy （SEM） method. The results show that the corrosion process of copper in seawater can be divided into two stages, in which corrosion resistance and SE show the same evolution trend of initial increase and subsequent decrease, while SG changes oppositely. However, the ensemble corrosion process of copper/titanium GC in seawater includes three stages, in which corrosion resistance and SE show the evolution features of initial decrease with a subsequently increase, and the final decrease again;while SG changes oppositely. The potential difference between copper and titanium in their galvanic couple can accelerate the initiation of pitting corrosion of copper, and both the minimum and maximum corrosion potentials of copper/titanium GC are much more positive than those of pure copper.

Effects of galvanic interaction between galena and pyrite on their flotation in the presence of butyl xanthate

The effects of galvanic interaction between galena and pyrite on their flotation and electrochemical characters were studied by electrochemical,adsorption,flotation and FTIR techniques,respectively.Electrochemical tests indicate that galena is electrochemically more active than pyrite and serves as an anode in galvanic combination with pyrite.The galvanic current density from a mixture of galena and pyrite is 4 times as high as the self corrosion current density of galena,which indicates that the corrosion rate of galena is accelerated.Adsorption tests show that the adsorption of butyl xanthate on galena surface is enhanced,and affected by a combination of pyrite-galena mixtures and conditioning time.Compared with individual mineral particles,galvanic interaction reduces the floatability difference between galena and pyrite.The flotation recovery of galena decreases while that of pyrite increases when two minerals are mixed together due to the influence of galvanic interaction on the formation of hydrophilic/hydrophobic product.The FTIR results show that the formation of dixanthogen on pyrite surface is depressed due to the galvanic interaction.

Galvanic反应原位制备多金属氢氧化物用于OER催化

采用镍氨和钴氨为电解液电沉积金属钴镍,提高材料的比表面积和导电性,再通过Galvanic反应快速合成了金属钴镍复合钴镍铁氢氧化物(CoNi/CoNiFe H)催化剂用于OER催化,采用XRD、SEM、XPS对材料的结构、形貌进行了表征,并研究了其电化学性能。结果表明:在1 M KOH溶液中,电流密度为10 mA·cm^(-2)时,过电位仅有250 mV,Tafel斜率为29 mV·dec^(-1),且具有良好的稳定性。这为制备廉价的多金属复合材料用于高效OER催化提供了新的方法。

A novel PdNi/Al_2O_3 catalyst prepared by galvanic deposition for low temperature methane combustion

Galvanic deposition method was used to prepare the Pd/Ni-Al2O3-GD catalyst for the combustion of methane under lean conditions. The new catalyst and compared catalysts （Pd/Al2O3-IW, Pd-Ni/Al2O3-IW, Pd/Ni-Al2O3-IW） prepared by incipient wetness impregnation were characterized by N2-physisorption, XRD and TEM to clarify particle size and size distribution of palladium species. Combined O2-TPD and XPS results with the catalytic data, it shows that the surface palladium species with low valence exhibits better combustion performance due to their stronger interaction with support. The results indicate that the galvanic deposition method is an effective route to prepare efficient catalyst for methane combustion, and it also provides useful information for improving the present commercial catalyst.

GALVANIC CORROSION AND PROTECTION OF GECM/LY12CZ COUPLES UNDER DIFFERENT ATMOSPHERIC EXPOSURE CONDITIONS

Galvanic, compatibility between graphite epoxy composite materials (GECM) and LY12CZ aluminum alloy was evaluated in different atmospheric corrosion environments and by laboratory electrochemical measurements. Open circuit potential electrochemical measurements showed a relatively large potential difference about 1 volt between the GECM and LY12CZ aluminum alloy, and this difference provided the driving force for galvanic corrosion of the LY12CZ aluminum alloy as an anode. Having been exposed for 1, 3 or 5 years in Beijing, Tuandao and Wanning station, GECM/LY12CZ couples showed significant losses of strength and elongation. Protective coatings and non-conductive barriers breaking the galvanic corrosion circuit were evaluated under the same atmospheric corrosive conditions. Epoxy primer paint, glass cloth barriers and LY12CZ anodizing were effective in galvanic corrosion control for GECM/LY12CZ couples.

A study on vestibular-evoked myogenic potentials via galvanic vestibular stimulation in normal people

Objectives: The aim of our study is to examine vestibular-evoked myogenic potentials(VEMPs) elicited by the galvanic vestibular stimulation in the sternocleidomastoid muscle(SCM) in healthy subjects for clinical applications of auditory neuropathy or vestibular neuropathy in the future.Methods: We enrolled sixteen healthy subjects to record the average responses of SCM to galvanic vestibular stimulation(GVS) [current 3 mA;duration 1 ms] by electromyography(EMG). SPSS 18.0 software was used to analyze the obtained data for mean and standard deviation.Results: In all healthy subjects mastoid-forehead galvanic vestibular stimulation produced a positive-negative biphasic EMG responses on SCM ipsilateral to the cathodal electrode. The latency of p13 was 11.7 ± 3.0 ms. The latency of n23 was 17.8 ± 3.4 ms. The amplitude of p13-n23 was147.0 ± 69.0 μV. The interaural asymmetry ratio(AR) of p13, n23 latency and the amplitude was respectively 0.12 ± 0.09, 0.08 ± 0.08 and0.16 ± 0.10.Discussions: Galvanic vestibular stimulation could elicit biphasic EMG responses from SCM via the vestibular nerve but not from the otolith organs. Galvanic stimulation together with air conducted sound(ACS) or bone conducted vibration(BCV) can elicit VEMPs and may enable the differentiation of retrolabyrinthine lesions from labyrinthine lesions in vestibular system.

GALVANIC INTERACTION OF CONTACTING SULFIDE PARTICLE AND ITS EFFECT ON FLOTATION

ＩＮＴＲＯＤＵＣＴＩＯＮＳｕｌｆｉｄｅｏｒｅｓａｒｅｇｅｎｅｒａｌｙｃｏｎｃｅｎｔｒａｔｅｄｂｙｆｌｏｔａｔｉｏｎｐｒｏｃｅｓ．Ｔｈｅｉｎｔｅｒａｃｔｉｏｎｏｆｔｗｏｓｕｌｆｉｄｅｍｉｎｅｒａｌｓｃａｎａｆｅｃｔｔｈｅｓｕｒｆａｃｅｐｒｏｐｅｒｔｉｅ...

Boundary Element Method (BEM) Analysis for Galvanic Corrosion of Hot Dip Galvanized Steel Immersed in Seawater

A numerical analysis of galvanic corrosion of hot-dip galvanized steel immersed in seawater was presented. The analysis was based on the boundary element methods （BEMs） coupled with Newton-Raphson iterative technique to treat the nonlinear boundary conditions, which were determined by the experimental polarization curves. Results showed that galvanic current density concentrates on the boundary of steel substrate and zinc coating, and the sacrificial protection of zinc coating to steel substrate results in overprotection of steel cathode. Not only oxygen reduction but also hydrogen reduction could occur as cathode reactions, which probably led up to the adsorption and absorption of hydrogen atoms. Flat galvanized steel tensile sample shows a brittle behavior similar to hydrogen embrittlement according to the SSRT （show strain rate test） in seawater.

Effects of Electroplated Coatings on Corrosion Behavior of Ti-1023/30CrMnSiA Galvanic Couple

Galvanic corrosion behavior of Ti-1023 titanium alloy coupled 30CrMnSiA steel was investigated in 3.5% NaCl solution. Particular attention was given to the effect of three different electroplated coatings on corrosion behavior of the galvanic couple. Galvanic corrosion test was conducted on Ti-1023 titanium alloy which coupled Ni-electroplated 30CrMnSiA, Zn-electroplated 30CrMnSiA, Cd-electroplated 30CrMnSiA and bare 30CrMnSiA, respectively. Corrosion properties including open circuit potential （Eoc）, galvanic corrosion potential （Eg）, and galvanic corrosion current （lg） were monitored. Corrosion morphology was observed by optical microscope （OM） and corrosion mechanism was analyzed and discussed. The results show that the three electroplated coatings improve the corrosion resistance of the anode in different magnitudes. Ni-electroplated 30CrMnSiA and Cd-electroplated 30CrMnSiA coatings are found to be least susceptible to galvanic corrosion when coupled Ti-1023 titanium alloy. Zn-electroplated 30CrMnSiA is moderately susceptible to galvanic corrosion. But the bare 30CrMnSiA is highly susceptible to galvanic corrosion in corrosive environment.

Pure metal extraction from molten oxide slag by short-circuit galvanic cell

The oxygen-ion-permeable membrane galvanic short-circuit method has been developed, in which pure metal was directly extracted from the molten oxide slag, and no external voltage is applied. The galvanic cell employed in the experiment was as follows: graphite rod|[O]Fe+C saturation|ZrO2(MgO)|(FeO)(slag)|Fe rod. The reduction current in the galvanic cell consisted of an external short-circuit current and an interior short-circuit current in the oxygen-ion-permeable membrane. The real-time variation of external circuit reduction ratio of the molten slag could be obtained from the curve of the external circuit current to the time.

Galvanic Corrosion Behaviour of Aluminium 3004 and Copper in Tropical Marine Atmosphere

The galvanic corrosion behaviour of aluminium 3004 and copper with different area ratios were studied in the tropical marine atmosphere at Tuticorin harbour over a period of 426 days. The area ratios OfAAI： Acu, studied were l：l, 1：2, l：4, 1：8, 2：1, 4：1 ＆ 8：1. The galvanic corrosion behaviour of metals was studied in terms of relative increase in the corrosion rate of aluminium due to galvanic coupling with copper, relative decrease in the corrosion rate of copper due to galvanic coupling with aluminium, and the susceptibility of aluminium to pitting owing to galvanic coupling with copper, The galvanic potential and galvanic current of the system were monitored. Pits of different dimensions ranging from mild etchings to perforations were experienced on the borders and the surfaces of the interface of aluminium in contact with copper. The weathering parameters and the environmental pollutants which have a major role in influencing the galvanic corrosion of metals were also monitored. The corrosion products resulting from galvanic corrosion were analysed using XRD and the pitting on aluminium resulting from galvanic corrosion has been highlighted in terms of pit depth, size and density of pit, using a high resolution microscope.

Pure metal extraction from molten oxide slag by short-circuit galvanic cell

The oxygen-ion-permeable membrane galvanic short-circuit method has been developed, in which pure metal was directly extracted from the molten oxide slag, and no external voltage is applied. The galvanic cell employed in the experiment was as follows: graphite rod|[O]_(Fe+C saturation)[ZrO_2(MgO)|(FeO)_(slag))|Fe rod. The reduction current in the galvanic cell consisted of an external short-circuit current and an interior short-circuit current in the oxygen-ion-permeable membrane. The real-time variation of external circuit reduction ratio of the molten slag could be obtained from the curve of the external circuit current to the time.

Galvanic corrosion behavior of die cast AZ91D magnesium alloy in chloride solution

: The galvanic corrosion behavior of die cast AZ91D magnesium alloy coupled with H62 brass, 316L stainless steel, A3 steel and LY12 aluminum alloy of different areas in 3.5% NaCl solution was studied. The free corrosion potentials, galvanic potentials and currents of these galvanic couples were measured. The galvanic effects were determined by the mass loss and regression method using three points. The results show that: (1) In these four kinds of couples AZ91D acts as the anode, whose galvanic corrosion behavior is mainly controlled by the cathodic polarization; (2) The free corrosion potentials of these four kinds of couples change a little with time and cathodic/anodic area ratio (CAAR); (3) The galvanic potential of AZ91D/LY12 moves positively with the increase of time and CAAR; (4) The galvanic currents increase with CAAR, but there is difference in the current change between different couples; (5) The anodic dissolution rate of the magnesium alloy increases by 2-3 orders after being coupled with these four kinds of metals and the galvanic effects of these couples have such a relation as γH62> γ316L.S.S>γLY12>γA3.

Galvanic Corrosion Behaviour of HE 20 / MDN 138 ＆ HE 20 /MDN 250 Alloys in Natural Seawater

In view of their excellent mechanical properties, workability and heat treatment characteristics, MDN 138 & MDN 250 have been widely used in missile, rocket and aerospace industries. With light weight and high performance characteristics HE 20 aluminium alloy acts as an important material in defence and aerospace applications. The galvanic corrosion behaviour of the metal combinations HE 20 / MDN 138 and HE 20 / MDN 250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI's Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN 138, MDN 250 and HE 20 of the individual metal, the mixed potential and galvanic current of the couples HE 20 / MDN 138 and HE 20 / MDN 250 were periodically monitored throughout the study period. The calcareous deposits on MDN 138 and MDN 250 were analysed using XRD. The results of the study reveal that that HE 20 has offered required amount of protection to MDN 138 & MDN 250.

GALVANIC CORROSION BETWEEN GRAPHITE EPOXY COMPOSITE MATERIALS AND LY12CZ ALUMINUM ALLOY

The electrochemical approach was used to show the nature of the galvanic corrosion when graphite epoxy composite materials(GECM)were coupled to LY12CZ aluminum alloy. An open circuit potential difference of one volt was obtained in 3.5% NaCl solution between GECM and LY12CZ. Corrosion current data (zero impedance technique) indicated that there was serious corrosion at GECM/LY12CZ couple.When GECM/LY12CZ couples were exposed to ASTM salt spray and alternate immersion condition, fiber glass cloth and H06-2 epoxy primer paint were effective methods for preventing galvanic corrosion.The slow strain rate test (SSRT) showed that GECM increased the LY12CZ stress corrosion crack growth rate.

Galvanic Interactions of HE15 / MDN138 & HE15 / MDN250 Alloys in Natural Seawater

HE15 is a heat treatable high strength alloy with excellent machinability find wide applications in aerospace and defence industries. In view of their excellent mechanical properties, workability, machinability, heat treatment characteristics and good resistance to general and stress corrosion cracking, MDN138 & MDN250 have been widely used in petrochemical, nuclear and aerospace industries. The galvanic corrosion behaviour of the metal combinations HE15 / MDN138 and HE15 / MDN250, with 1:1 area ratio, has been studied in natural seawater using the open well facility of CECRI's Offshore Platform at Tuticorin for a year. The open circuit potentials of MDN138, MDN250 and HE15 of the individual metal, the galvanic potential and galvanic current of the couples HE15 / MDN138 and HE15 / MDN250 were periodically monitored throughout the study period. The calcareous deposits on MDN138 and MDN250 in galvanic contact with HE15 were analyzed using XRD. The electrochemical behaviors of MDN138, MDN250 and HE15 in seawater have been studied using an electrochemical work station. The surface characteristics of MDN138 and MDN250 in galvanic contact with HE15 have been examined with scanning electron microscope. The results of the study reveal that HE15 offered required amount of protection to MDN138 & MDN250.

Effect of Stress and Galvanic Factors on the Corrosion Behave of Aluminum Alloy

The interaction between stress and galvanic during the corrosion process of 5050 aluminum alloys was studied and the evolution of mechanics properties was indicated. Electrochemical impedance technique and scanning electron microscopy were used to analyze the surface electrochemical states and the corrosion morphology. At the same time, corrosion kinetics and thermodynamic theory were used to analyze the influencing mechanism of the stress factor and the galvanic factor. The results show that both of galvanic factor and tensile stress factor can increase the corrosion potential of aluminum alloys and result in the corrosion resistance decrease. With decreasing corrosion resistance, the mechanical properties of aluminum alloys decrease. These phenomena are attributed to two reasons： One is that aluminum alloys may under the condition of anodic polarization after coupled with 40 Cr Ni Mo A steel, so the corrosion can be promoted; The other is that with increasing stress, the electrochemical potential of 5050 aluminum alloys decreases and the potential difference between two materials increases, so the corrosion becomes serious. Compared to the stress factor, the galvanic factor is significant.