Gas evolution characteristics of three kinds of no-bake resin-bonded sands for foundry in production

No-bake resin-bonded sand is commonly used in casting production.However,its air pollution is relatively serious,especially in the molding and pouring process.For this reason,it is necessary to study the gas evolution characteristics of no-bake resin-bonded sand from room temperature to high temperatures,and not only the amount of gaseous products,but also the composition of the gaseous products.No-bake furan resin-bonded sand(#1),phenolic urethane no-bake resin-bonded sand(#2),and alkaline phenolic no-bake resin-bonded sand(#3)are the three most common no-bake resin-bonded sands in casting.The gas evolution volume and rate of these three no-bake resin-bonded sands were studied.Thermogravimetry-mass spectrometer(TG-MS),headspace-gas chromatography/mass spectrometer(HS-GC/MS),and pyrolysis-gas chromatography/mass spectrometer(PY-GC/MS)were used to measure the composition of the gaseous products emitted from binders at room temperature and high temperatures.The differences between formaldehyde,heterocyclic aromatic compounds(HAC),monocyclic aromatic hydrocarbons(MAH),and polycyclic aromatic hydrocarbons(PAHs)gaseous products from the three types of no-bake resin-bonded sands during the molding and casting process were compared.From the perspective of environmental protection,alkaline phenolic no-bake resin-bonded sand and no-bake furan resin-bonded sand are better than phenolic urethane no-bake resin-bonded sand.

Nonlocal Theory of the Photon Gas Evolution Beginning from the Planck Time

Evolution of the photon gas (PG) in the Planck period is considered as a particular case of the physical vacuum (PV) hydrodynamics. Nonlocal quantum hydrodynamic equations are applied for calculation of the photon gas evolution. In general case, PG hydrodynamics contains gravitation in the explicit form. Exact analytical solutions of PG hydrodynamics are obtained. Solutions show the exponential growth of gradient values for internal energy in time and space. In comparison with phenomenological General Relativistic Theory, Nonlocal quantum hydrodynamics (NQH) does not lead to contradictions in all limit cases. Theory of physical vacuum and the theory of photonic gas are related theories. These theoretical (analytical!) results confirm the result of direct observations (Arno Alan Penzias and Robert Woodrow Wilson, Nobel Prize (1978) for their discovery of cosmic microwave background;John C. Mather and George F. Smoot. Nobel Prize (2006) for their discovery of the blackbody form and anisotropy of the cosmic microwave background radiation).

Femtosecond laser micro-nano processing for boosting bubble releasing of gas evolution reactions

Coupling effect of chemical composition and physical structure is a key factor to construct superaerophobic electrodes.Almost all reports about superaerophobic electrodes were aimed at precisely controlling morphology of loaded materials(constructing specific structure)and ignored the due role of substrate.Nevertheless,in this work,by using high precision and controllable femtosecond laser,hierarchical micro-nano structures with superaerophobic properties were constructed on the surface of silicon substrate(fs-Si),and such special super-wettability could be successfully inherited to subsequent self-supporting electrodes through chemical synthesis.Femtosecond laser processing endowed electrodes with high electrochemical surface area,strong physical structure,and remarkable superaerophobic efficacy.As an unconventional processing method,the reconstructed morphology of substrate surface bears the responsibility of superaerophobicity,thus liberating the structural constraints on loaded materials.Since this key of coupling effect is transferred from the loaded materials to substrate,we provided a new general scheme for synthesizing superaerophobic electrodes.The successful introduction of femtosecond laser will open a new idea to synthesize self-supporting electrodes for gas-involving reactions.

Quantification and timing of porosity evolution in tight sand gas reservoirs:an example from the Middle Jurassic Shaximiao Formation,western Sichuan,China

The diagenesis and porosity evolution of the Middle Jurassic Shaximiao sandstones were analyzed based on petrographic observations, X-ray diffractometry, scanning electron microscopy observations, carbon and oxygen stable isotope geochemistry, fluid inclusion mi- crothermometry, and thermal and burial history modeling results. The point count data show that secondary pores （av. 5.5 %） are more abundant than primary pores （av. 3.7 %） and are thus the dominant pore type in the Shaximiao sandstones. Analysis of porosity evolution indicates that alteration of sandstones mainly occurred during two paragenetic stages. Mechanical compaction and cementa- tion by early chlorite, calcite, and quartz typically decrease the depositional porosity （40.9 %） by an average of 37.2 %, leaving porosity of 3.7 % after stage I （〈85 ℃, 175-145 Ma）. The original intergranular porosity loss due to compaction is calculated to be 29.3 %, suggesting that mechanical compaction is the most significant diagenetic process in primary porosity destruction. Stage II can be further divided into two sub-stages （Stage IIa and Stage IIb）. Stage IIa （85-120 ℃, 145-125 Ma） is characterized by late dissolution, which enhanced porosity by 8.8 %, and the porosity increased from 3.7 % to 12.5 %. During stage IIb （〉120 ℃, 125-0 Ma）, the precipitation of late chlorite, calcite, quartz, and kaolinite destroyed 3.3 % porosity, leaving porosity of 9.2 % in the rock today.

Accumulation Mechanisms and Evolution History of the Giant Puguang Gas Field,Sichuan Basin,China

Solid bitumens were found throughout the carbonate reservoirs in the Puguang gas field, the largest gas field so far found in marine carbonates in China, confirming that the Puguang gas field evolved from a paleo-oil reservoir. The fluid conduit system at the time of intensive oil accumulation in the field was reconstructed, and petroleum migration pathways were modeled using a 3-D model and traced by geochemical parameters. The forward modeling and inversion tracing coincided with each other and both indicated that oils accumulated in the Puguang-Dongyuezhai structure originated from a generative kitchen to the northwest of the Puguang gas field. The deposition of organic-rich Upper Permian source rocks dominated by sapropelic organic matter in the Northeast Sichuan Basin, the development of fluid conduit system that was vertically near-source rock and laterally near-generative kitchen, and the focusing of oils originated from a large area of the generative kitchen, were the three requirements for the formation of the giant paleo-oil reservoir from which the giant Puguang gas field evolved. The Puguang gas field had experienced a three-stage evolution. The post-accumulation processes, especially the organic-inorganic interaction in the hydrocarbon-water-rock system, had not only profoundly altered the composition and characteristics of the petroleum fluids, but also obviously changed the physicochemical conditions in the reservoir and resulted in complicated precipitation and solution of carbonate minerals.

Component fractionation of temporal evolution in adsorption-desorption for binary gas mixtures on coals from Haishiwan Coal Mine

Adsorption-desorption experiments on CO2-CH4 gas mixtures with varying compositions have been conducted to study the fractionation characteristics of CO2-CH4 on Haishiwan coal samples. These were carried out at constant temperature but different equilibrium pressure conditions. Based on these experimental results, the temporal evolution of component fractionation in the field was investigated. The results show that the CO2 concentration in the adsorbed phase is always greater than that in the original gas mixture during the desorption process, while CH4 shows the opposite characteristics. This has confirmed that CO2 , with a greater adsorption ability has a predominant position in the competition with CH4 under different pressures. Where gas drainage is employed, the ratio of CO2 to CH4 varies with time and space in floor roadways used for gas drainage, and in the ventilation air in Nos.1 and 2 coal seams, which is consistent with laboratory results.

Gas Generation Mechanism in Li-Metal Batteries

Gas generation induced by parasitic reactions in lithium-metal batteries(LMB)has been regarded as one of the fundamental barriers to the reversibility of this battery chemistry,which occurs via the complex interplays among electrolytes,cathode,anode,and the decomposition species that travel across the cell.In this work,a novel in situ differential electrochemical mass spectrometry is constructed to differentiate the speciation and source of each gas product generated either during cycling or during storage in the presence of cathode chemistries of varying structure and nickel contents.It unambiguously excludes the trace moisture in electrolyte as the major source of hydrogen and convincingly identifies the layer-structured NCM cathode material as the source of instability that releases active oxygen from the lattice at high voltages when NCM experiences H2→H3 phase transition,which in turn reacts with carbonate solvents,producing both CO_(2)and proton at the cathode side.Such proton in solvated state travels across the cell and becomes the main source for hydrogen generated at the anode side.Mechanisms are proposed to account for these irreversible reactions,and two electrolyte additives based on phosphate structure are adopted to mitigate the gas generation based on the understanding of the above decomposition chemistries.

Wettability control in electrocatalyst: A mini review

Electrocatalysis, as a typical heterogeneous catalysis, generally occurs in the di-or tri-phase interfaces.Wettability is an important property for describing the balance of a gas-liquid-solid system. Therefore,the wettability of reaction interface, especially hydrophilicity/hydrophobicity, plays an important role in the adsorption/desorption process of gas bubbles on the surface of the solid electrode. Herein, we present a comprehensive review of the wettability control of the electrode materials applied in electrocatalysis reactions, including hydrogen evolution reaction(HER), oxygen evolution reaction(OER), oxygen reduction reaction(ORR) and carbon dioxide reduction reaction(CO_(2) RR). Firstly, the basic theories of wettability as well as the impact on electrocatalysis were introduced in this review. Secondly, the overview of modifying methods of the wettability from electrocatalyst microstructure(structural modification, surface coating, introducing hydrophilic groups) and system design(electrode, device) were suggested. At last, the deficiencies and problems in the application of wettability control are discussed,and deeper and broader application prospects are proposed.

Multi-scale boron penetration toward stabilizing nickel-rich cathode

Nickel-rich layered oxides LiNi_(x)Co_(y)Mn_(1-x-y)O_(2)(x≥0.8)have been recognized as the preferred cathode materials to develop lithium-ion batteries with high energy density(>300 Wh kg^(−1)).However,the poor cycling stability and rate capability stemming from intergranular cracks and sluggish kinetics hinder their commercialization.To address such issues,a multi-scale boron penetration strategy is designed and applied on the polycrystalline LiNi_(0.83)Co_(0.11)Mn_(0.06)O_(2)particles that are pre-treated with pore construction.The lithium-ion conductive lithium borate in grain gaps functions as the grain binder that can bear the strain/stress from anisotropic contraction/expansion,and provides more pathways for lithium-ion diffusion.As a result,the intergranular cracks are ameliorated and the lithium-ion diffusion kinetics is improved.Moreover,the coating layer separates the sensitive cathode surface and electrolyte,helping to suppress the parasitic reactions and related gas evolution.In addition,the enhanced structural stability is acquired by strong B-O bonds with trace boron doping.As a result,the boron-modified sample with an optimized boron content of 0.5%(B5-NCM)exhibits a higher initial discharge capacity of 205.5 mAh g^(−1)at 0.1C(1C=200 mA g^(−1))and improved capacity retention of 81.7%after 100 cycles at 1C.Furthermore,the rate performance is distinctly enhanced by high lithium-ion conductive LBO(175.6 mAh g^(−1)for B5-NCM and 154.6 mAh g^(−1)for B0-NCM at 5C)