Mechanical properties of gas hydrate-bearing sediments during hydrate dissociation

The changes in the mechanical properties of gas hydrate-bearing sediments(GHBS) induced by gas hydrate(GH) dissociation are essential to the evaluation of GH exploration and stratum instabilities. Previous studies present substantial mechanical data and constitutive models for GHBS at a given GH saturation under the non-dissociated condition. In this paper, GHBS was formed by the gas saturated method, GH was dissociated by depressurization until the GH saturation reached different dissociation degrees. The stress–strain curves were measured using triaxial tests at a same pore gas pressure and different confining pressures. The results show that the shear strength decreases progressively by 30%–90% of the initial value with GH dissociation, and the modulus decreases by 50% –75%. Simplified relationships for the modulus, cohesion, and internal friction angle with GH dissociated saturation were presented.

Theoretical analysis and numerical simulation of acoustic waves in gas hydrate-bearing sediments

Based on Carcione-Leclaire model,the time-splitting high-order staggered-grid finite-difference algorithm is proposed and constructed for understanding wave propagation mechanisms in gas hydrate-bearing sediments.Three compressional waves and two shear waves,as well as their energy distributions are investigated in detail.In particular,the influences of the friction coefficient between solid grains and gas hydrate and the viscosity of pore fluid on wave propagation are analyzed.The results show that our proposed numerical simulation algorithm proposed in this paper can effectively solve the problem of stiffness in the velocity-stress equations and suppress the grid dispersion,resulting in higher accuracy compared with the result of the Fourier pseudospectral method used by Carcione.The excitation mechanisms of the five wave modes are clearly revealed by the results of simulations.Besides,it is pointed that,the wave diffusion of the second kind of compressional and shear waves is influenced by the friction coefficient between solid grains and gas hydrate,while the diffusion of the third compressional wave is controlled by the fluid viscosity.Finally,two fluid-solid(gas-hydrate formation)models are constructed to study the mode conversion of various waves.The results show that the reflection,transmission,and transformation of various waves occur on the interface,forming a very complicated wave field,and the energy distribution of various converted waves in different phases is different.It is demonstrated from our studies that,the unconventional waves,such as the second and third kinds of compressional waves may be converted into conventional waves on an interface.These propagation mechanisms provide a concrete wave attenuation explanation in inhomogeneous media.

Deposition processes of gas hydrate-bearing sediments in the inter-canyon area of Shenhu Area in the northern South China Sea

The Shenhu Submarine Canyon Group on the northern slope of the South China Sea consists of 17 slope-confined canyons,providing a good example for investigating their hosting sediments.Three drilling sites,including W07,W18,and W19,have proven the occurrence of gas hydrate reservoirs in the inter-canyon area between canyons C11 and C12.Whereas,variations of the geomorphology and seismic facies analyzed by high-resolution 3D seismic data indicate that the gas hydrate-bearing sediments may form in different sedimentary processes.In the upper segment,a set of small-scale channels with obvious topographic lows can be identified,revealing fine-grained turbidites supplied from the shelf region during a very short-term sea-level lowstand.In the middle part,gas hydrate units at Site W07 showing mounded or undulation external configuration are interpreted as sliding sedimentary features,and those features caused by gravity destabilization were the main formative mechanism of gas hydrate-bearing sediments that were sourced from the upper segments.In contrast,for the canyon transition zone of lower segments between C11-C12 inter-canyon and C12 intra-canyon areas,where W18 and W19 sites are located,the gas hydratebearing sediments are deposited in the channelized feature in the middle to lower segment and slide erosive surface.Gas hydrate-bearing sediments of the lower segment were migrated through channelized features interconnecting with the middle to lower slope by gravity-driven flows.The majority of deposits tended to be furtherly moved by lateral migration via erosive surface created by sediment failed to intra-canyon area.The conclusion of this study may help better understand the interaction between the formation mechanism of gas hydrate-bearing sediments and the geomorphologic effects of inter-canyon areas.

Experimental Study on Mechanical Properties of Gas Hydrate-Bearing Sediments Using Kaolin Clay

A triaxial system is designed with a temperature range from -20 ℃ to 25℃ and a pressure range from 0 MPa to 30 MPa in order to improve the understanding of the mechanical properties of gas hydrate-bearing sediments. The mechanical properties of synthetic gas hydrate-bearing sediments （gas hydrate-kaolin clay mixture） were measured by using current experimental apparatus. The results indicate that： （1） the failure strength of gas hydrate-bearing sediments strongly depends on the temperature. The sediment＇s strength increases with the decreases of temperature. （2） The maximum deviator stress increases linearly with the confining pressure at a low-pressure stage. However, it fluctuates at a high-pressure stage. （3） Maximum deviator stress increases with increasing strain rate, whereas the strain-stress curve has no tremendous change until the axial strain reaches approximately 0.5%. （4） The internal friction angles of gas hydrate-bearing sediments are not sensitive to kaolin volume ratio. The cohesion shows a high kaolin volume ratio dependency.

A comprehensive analysis of formation conditions,intrinsic properties,and mechanical responses of gas hydrate-bearing sediments

Natural gas hydrates(NGH)stored in submarine deposits are a promising energy resource,Yet,the deterioration in sediment strength can trigger geological disasters due to drilling-induced hydrate dissociation.Hence,an in-depth investigation on geo physical-mechanical performance of gas hydrate-bearing sediments(GHBS)is crucial for recovery hydrates safely and efficiently.This paper provides a comprehensive assessment of the research progress on formation conditions,intrinsic properties,and mechanical responses of GHBS.The key findings have been presented:gas composition,inhibitors and promoters alter hydrate formation by modifying the thermodynamic equilibrium of temperature and pressure.Also,we identified the key determinants of porosity of GHBS and revealed the correlation between permeability,hydrate saturation,and hydrate morphology.Moreover,we highlighted the differences in mechanical behavior between hydrate-free sediments and GHBS along with their underlying mechanisms.Furthermore,we examined the methods for GHBS preparation as well as the employed test apparatuses,providing critical insights into the limitations and recommendations.By synthe-sizing data from existing literature,we conducted a comprehensive analysis of the dependence of mechanical parameters of GHBS on factors such as hydrate saturation,effective confining stress,and temperature,and dis-cussed the mechanical responses subjected to various hydrate dissociation methods.Finally,we offer a perspective for future research to focus on the micro-scale aspects,heterogeneous distribution,and long-term stability of GHBS.The discerned patterns and mechanical mechanisms are expected to guide the improvement of predictive model for geo physical-mechanical behavior of GHBS and establish a reference for developing effective strategies for recovery hydrates.

Saturation Estimation with Complex Electrical Conductivity for Hydrate-Bearing Clayey Sediments:An Experimental Study

Clays have considerable influence on the electrical properties of hydrate-bearing sediments.It is desirable to understand the electrical properties of hydrate-bearing clayey sediments and to build hydrate saturation(S_(h))models for reservoir evaluation and monitoring.The electrical properties of tetrahydrofuran-hydrate-bearing sediments with montmorillonite are characterized by complex conductivity at frequencies from 0.01 Hz to 1 kHz.The effects of clay and Sh on the complex conductivity were analyzed.A decrease and increase in electrical conductance result from the clay-swelling-induced blockage and ion migration in the electrical double layer(EDL),respectively.The quadrature conductivity increases with the clay content up to 10%because of the increased surface site density of counterions in EDL.Both the in-phase conductivity and quadrature conductivity decrease consistently with increasing Sh from 0.50 to 0.90.Three sets of models for Sh evaluation were developed.The model based on the Simandoux equation outperforms Archie’s formula,with a root-mean-square error(E_(RMS))of 1.8%and 3.9%,respectively,highlighting the clay effects on the in-phase conductivity.The fre-quency effect correlations based on in-phase and quadrature conductivities exhibit inferior performance(E_(RMS)=11.6%and 13.2%,re-spectively)due to the challenge of choosing an appropriate pair of frequencies and intrinsic uncertainties from two measurements.The second-order Cole-Cole formula can be used to fit the complex-conductivity spectra.One pair of inverted Cole-Cole parameters,i.e.,characteristic time and chargeability,is employed to predict S_(h) with an E_(RMS) of 5.05%and 9.05%,respectively.

Intrinsic correlation between the generalized phase equilibrium condition and mechanical behaviors in hydrate-bearing sediments

The phase equilibrium and mechanical behaviors of natural gas hydrate-bearing sediment are essential for gas recovery from hydrate reservoirs.In heating closed systems,the temperature-pressure path of hydrate-bearing sediment deviates from that of pure bulk hydrate,reflecting the porous media effect in phase equilibrium.A generalized phase equilibrium equation was established for hydrate-bearing sediments,which indicates that both capillary and osmotic pressures cause the phase equilibrium curve to shift leftward on the temperature-pressure plane.In contrast to bulk hydrate,hydrate-bearing sediment always contains a certain amount of unhydrated water,which keeps phase equilibrium with the hydrate within the hydrate stability field.With changes in temperature and pressure,a portion of pore hydrate and unhydrated water may transform into each other,affecting the shear strength of hydrate-bearing sediment.A shear strength model is proposed to consider not only hydrate saturation but also the change in temperature and pressure of hydrate-bearing sediment.The model is validated by experimental data with various hydrate saturation,temperature and pressure conditions.The deformation induced by partial dissociation was studied through depressurization tests under constant effective stress.The reduction in gas pressure within the hydrate stability field indeed caused sediment deformation.The dissociation-induced deformation can be reasonably estimated as the difference in volume between hydrate-bearing and hydrate-free sediments from the compression curves.

Thermal conductivity of hydrate and effective thermal conductivity of hydrate-bearing sediment

The research on the thermal property of the hydrate has recently made great progress,including the understanding of hydrate thermal conductivity and effective thermal conductivity(ETC)of hydratebearing sediment.The thermal conductivity of hydrate is of great significance for the hydrate-related field,such as the natural gas hydrate exploitation and prevention of the hydrate plugging in oil or gas pipelines.In order to obtain a comprehensive understanding of the research progress of the hydrate thermal conductivity and the ETC of hydrate-bearing sediment,the literature on the studies of the thermal conductivity of hydrate and the ETC of hydrate-bearing sediment were summarized and reviewed in this study.Firstly,experimental studies of the reported measured values and the temperature dependence of the thermal conductivity of hydrate were discussed and reviewed.Secondly,the studies of the experimental measurements of the ETC of hydrate-bearing sediment and the effects of temperature,porosity,hydrate saturation,water saturation,thermal conductivity of porous medium,phase change,and other factors on the ETC of hydrate-bearing sediment were discussed and reviewed.Thirdly,the research progress of modeling on the ETC of the hydrate-bearing sediment was reviewed.The thermal conductivity determines the heat transfer capacity of the hydrate reservoir and directly affects the hydrate exploitation efficiency.Future efforts need to be devoted to obtain experimental data of the ETC of hydrate reservoirs and establish models to accurately predict the ETC of hydrate-bearing sediment.

Mechanical Properties of Methane Hydrate-Bearing Interlayered Sediments

The complex distribution of gas hydrate in sediments makes understanding the mechanical properties of hydrate-bearing sediments a challenging task.The mechanical behaviors of hydrate-bearing interlayered sediments are still poorly known.A series of triaxial shearing tests were conducted to investigate the strength parameters and deformation properties of methane hydrate-bearing interlayered sediments at the effective pressure of 1 MPa.The results indicate that the stress-strain curves of hydrate-bearing interlayered sediments are significantly different from that of hydrate-bearing sediments.The peak strength,Young's modulus,initial yielding modulus,and failure mode are deeply affected by the methane hydrate distribution.The failure behaviors and mechanism of strain softening and hardening patterns of the interlayered specimens are more complicated than those of the integrated specimens.This study compares the different mechanical behaviors between integrated and interlayered specimens containing gas hydrate,which can serve as a reference for the prediction and analysis of the deformation behaviors of natural gas hydrate reservoirs.

Experimental study on mechanical properties of methane-hydrate-bearing sediments

Mechanical properties of methane hydrate- bearing-sediments （MHBS） are basic parameters for safety analysis of hydrate exploration and exploitation. Young＇s modulus, cohesion, and internal friction angle of hydrate- bearing sediments synthesized in laboratory, are investigated using tri-axial tests. Stress-strain curves and strength parameters are obtained and discussed for different compositions and different hydrate saturation, followed by empirical expressions related to the cohesion, internal friction angle, and modulus of MHBS. Almost all tested MHBS samples exhibit plastic failure. With the increase of total saturation of ice and methane hydrate （MH）, the specimens＇ internal friction angle decreases while the cohesion increases.

Accumulation and exploration of gas hydrate in deep-sea sediments of northern South China Sea

The large deep-sea area from the southwestern Qiongdongnan Basin to the eastern Dongsha Islands,within the continental margin of northern South China Sea,is a frontier of natural gas hydrate exploration in China.Multiform of deep-sea sedimentations have been occurred since late Miocene,and sediment waves as a potential quality reservoir of natural gas hydrate is an most important style of them.Based on abundant available data of seismic,gravity sampling and drilling core,we analyzed the characteristics of seismic reflection and sedimentation of sediment waves and the occurrence of natural gas hydrate hosted in it,and discussed the control factors on natural gas hydrate accumulation.The former findings revealed the deep sea of the northern South China Sea have superior geological conditions on natural gas hydrate accumulation.Therefore,it will be of great significance in deep-sea natural gas hydrate exploration with the study on the relationship between deep-sea sedimentation and natural gas hydrate accumulation.

Drucker-Prager Elasto-Plastic Constitutive Model for Methane Hydrate-Bearing Sediment

A constitutive model for methane hydrate-bearing sediment(MHBS)is essential for the analysis of mechanical response of MHBS to the change of hydrate saturation caused by gas extraction. A new elasto-plastic constitutive model is built in order to simulate the mechanical behavior of MHBS in this paper. This model represents more significant mechanical properties of MHBS such as bonding, higher stiffness, softening and stress-strain nonlinear relationship. The bonding behavior can be described by use of a parameter related to mechanical hydrate saturation. Higher stiffness can be modeled by the introduction of hydrate saturation into traditional expression of soil stiffness. Softening can be controlled by a function describing the relationship between cohesion and bonding structure factor. Dilatancy can be estimated by establishing the relationship between the lateral strain and axial strain. Meanwhile, the hypothesis of isotropic expanding is applied to the calculation of the volumetric strain. The stress-strain curves under different hydrate saturation conditions predicted by the proposed model are in good agreement with the test data. All the coefficients can be easily obtained by the triaxial test of MHBS.

Lipid Distribution in Marine Sediments from the Northern South China Sea and Association with Gas Hydrate

The distributions of lipids in surface and subsurface sediments from the northern South China Sea were determined. The n-alkanes were in bimodal distribution that is characterized by a centre at n-C16 –n-C20 with maximum at C18（or C19） and n-C27 –n-C31 as well as at C29（or C31）. The short-chain alkanes suffered from significant losses due to their slow deposition in the water column, and their presence with a slight even carbon predominance in shallow seafloor sediments was ascribed mainly to the direct input from the benthos. The long-chain alkanes with odd predominance indicate transportion of terrigenous organic matter. Immature hopanoid biomarkers reflect the intense microbial activity for bacteria–derived organic matter and the gradual increase of maturity with burial depth. Abundant n-fatty acid methyl esters（n-FAMEs） that are in distributions coincident with fatty acids were detected in all samples. We proposed that the observed FAMEs originated from the methyl esterification of fatty acids; methanol production by methanotrophs and methanogenic archaea related to the anaerobic oxidation of methane, and sulfate reduction provided an O–methyl donor for methylation of fatty acids. The CH4 released from hydrate dissociation at oxygen isotope stage II of Cores ZD3 and ZS5, which had been confirmed by the occurrence of negative δ13C excursion and spherical pyrite aggregates, could have accelerated the above process and thus maximized the relative content of FAMEs at ZD3-2（400–420 cm depth） and ZS5-2（241–291 cm depth）.

An improved specimen preparation method for marine shallow gasbearing sand sediments and its validations

Instabilities of shallow gas-charged seabed are potential geological hazards in ocean engineering.In practice,the conventional field sampling techniques failed to obtain undisturbed gas-bearing sediments from the seabed for laboratory mechanical testing because of sensitive gas exsolution and escape from sediments.However,preparation of representative remoulded gas-charged specimens is a challenging issue,because it is rather difficult to quantitatively control the gas content and obtain uniform distribution of gas bubbles within the specimen.Given the above problems,this work proposes a reliable approach to reconstitute the high-saturation specimen of gas-charged sediments in the laboratory by an improved multifunction integrated triaxial apparatus(MITA).This apparatus is developed based on an advanced stress path triaxial system by introducing a temperature-controlled system and a wavemonitoring system.The temperature-controlled system is used to accurately mimic the in situ environments of sediments in the seabed.The wave-monitoring system is utilized to identify exsolution point of free gas and examine the disturbance of gas to specimens during gas exsolution.The detailed procedure of gassy specimen preparation is introduced.Then,the quality of prepared specimens using our improved apparatus is validated by the high-resolution micro-X-ray computed tomography(mCT)scanning test,from which bubble occurrence and size distribution within the gassy sand specimen can be obtained;and preliminary mechanical tests on gassy sand specimens with various initial saturation degrees are performed.The proposed specimen preparation procedure succeeds in proving the postulated occurrence state of gas bubbles in coarse-grained sediments and accurately controlling the gas content.

Investigation of the hydrate formation process in fine sediments by a binary CO2/N2 gas mixture

To obtain the fundamental data of CO2/N2 gas mixture hydrate formation kinetics and CO2 separation and sequestration mechanisms,the gas hydrate formation process by a binary CO2/N2 gas mixture(50:50)in fine sediments(150–250μm)was investigated in a semibatch vessel at variable temperatures(273,275,and 277 K)and pressures(5.8–7.8 MPa).During the gas hydrate reaction process,the changes in the gaseous phase composition were determined by gas chromatography.The results indicate that the gas hydrate formation process of the binary CO2/N2 gas mixture in fine sediments can be reduced to two stages.Firstly,the dissolved gas containing a large amount of CO2 formed gas hydrates,and then gaseous N2 participated in the gas hydrate formation.In the second stage,all the dissolved gas was consumed.Thus,both gaseous CO2 and N2 diffused into sediment.The first stage in different experiments lasted for 5–15 h,and>60%of the gas was consumed in this period.The gas consumption rate was greater in the first stage than in the second stage.After the completion of gas hydrate formation,the CO2 content in the gas hydrate was more than that in the gas phase.This indicates that CO2 formed hydrate easily than N2 in the binary mixture.Higher operating pressures and lower temperatures increased the gas consumption rate of the binary gas mixture in gas hydrate formation.

Fluid-solid coupling model for studying wellbore instability in drilling of gas hydrate bearing sediments

As the oil or gas exploration and development activities in deep and ultra- deep waters become more and more, encountering gas hydrate bearing sediments （HBS） is almost inevitable. The variation in temperature and pressure can destabilize gas hydrate in nearby formation around the borehole, which may reduce the strength of the formation and result in wellbore instability. A non-isothermal, transient, two-phase, and fluid-solid coupling mathematical model is proposed to simulate the complex stability performance of a wellbore drilled in HBS. In the model, the phase transition of hydrate dissociation, the heat exchange between drilling fluid and formation, the change of mechanical and petrophysical properties, the gas-water two-phase seepage, and its interaction with rock deformation are considered. A finite element simulator is developed, and the impact of drilling mud on wellbore instability in HBS is simulated. Results indicate that the re- duction in pressure and the increase in temperature of the drilling fluid can accelerate hydrate decomposition and lead to mechanical properties getting worse tremendously. The cohesion decreases by 25% when the hydrate totally dissociates in HBS. This easily causes the wellbore instability accordingly. In the first two hours after the formation is drilled, the regions of hydrate dissociation and wellbore instability extend quickly. Then, with the soaking time of drilling fluid increasing, the regions enlarge little. Choosing the low temperature drilling fluid and increasing the drilling mud pressure appropriately can benefit the wellbore stability of HBS. The established model turns out to be an efficient tool in numerical studies of the hydrate dissociation behavior and wellbore stability of HBS.

An experimental study on microscopic characteristics of gas-bearing sediments under different gas reservoir pressures

Gas-bearing sediments are widely distributed in five continents all over the world.Most of the gases exist in the soil skeleton in the form of discrete large bubbles.The existence of gas-phase may increase or decrease the strength of the soil skeleton.So far,bubbles’structural morphology and evolution characteristics in soil skeleton lack research,and the influence of different gas reservoir pressures on bubbles are still unclear.The micro characteristics of bubbles in the same sediment sample were studied using an industrial CT scanning test system to solve these problems.Using the image processing software,the micro variation characteristics of gas-bearing sediments in gas reservoir pressure change are obtained.The results show that the number and volume of bubbles in different equivalent radius ranges will change regularly under different gas reservoir pressure.With the increase of gas reservoir pressure,the number and volume of tiny bubbles decrease.In contrast,the number and volume of large bubbles increase,and the gas content in different positions increases and occupies a dominant position,driving the reduction of pore water and soil skeleton movement.

Evidence for pore-filling gas hydrates in the sediments through morphology observation

To provide an evidence of natural gas hydrate occurrence state,a series of experiments on multiple growth and dissociation of 90.0%methane/10.0%propane hydrates at 1.3 MPa and 270.15 K were carried out in two sediments for morphology observation via a visible jacketed-reactor.The gas hydrate crystals were observed to form and grow on the surface of sediments at the initial growth.During the thermal decomposition,gas and liquid products had an unceasingly impact on the sediments,then gas/liquid–solid migration occurred,and a large number of cavitation appeared.In the later growth and dissociation experiments,the gas hydrate particles were in suspension or supporting states in the interstitial pore space between the sediment particles,indicating that the gas hydrate displayed a pore-filling characteristics.Through analyzing the distribution of gas hydrates and bubbles,it was found that the amount of gas hydrates distributed in the sediments was improved with multiple growth-dissociation cycle proceedings.Gas migration enhanced the sediment movement,which led to the appearance of the increasing quantity of gas bubbles in the sediments during cycles.Salts affected the growth of the gas hydrates and the migration of sediment grains,which also restricted the accumulation of gas bubbles in the sediments.According to the Raman analysis,the results showed that sII hydrates were formed for CH4 and C3H8 gas mixtures in different sediments and solutions with hydration number of 5.84–6.53.The Salt restricted the access of gas into the hydrate cages.

Determination of butyltin compounds in sediments by gas chromatography with flame photometric detector

ＤｅｔｅｒｍｉｎａｔｉｏｎｏｆｂｕｔｙｌｔｉｎｃｏｍｐｏｕｎｄｓｉｎｓｅｄｉｍｅｎｔｓｂｙｇａｓｃｈｒｏｍａｔｏｇｒａｐｈｙｗｉｔｈｆｌａｍｅｐｈｏｔｏｍｅｔｒｉｃｄｅｔｅｃｔｏｒＸｕＦｕｚｈｅｎｇ；ＺａｎＪｕｎ；ＪｉａｎｇＧｕｉｂｉｎ；ＨａｎＨｅｎ...

Research on Pressure Tight Sampling Technique of Deep-Sea Shallow Sediment—A New Approach to Gas Hydrate Investigation

Analyzed and calculated are pressure changes and body deformation of the sample inside of the corer in the process of sampling of deep-sea shallow sediment with a non-piston corer for gas hydrate investigation, Two conclusions are drawn： （1） the stress increments associated with the corer through the sampling process do not affect the stabilization of the gas hydrate; （2） the body deformation of the sample is serious and the ＂incremental filling ratio＂ （IFR） is less than unit, For taking samples with in-situ pressure and structure, combining with the design theories of the pressure tight corer, we have designed a kind of piston corer, named the gas hydrate pressure tight piston corer, Several tests on the sea have been conducted. Test results indicate that the piston corer has a good ability of taking sediment samples on the seafloor and maintaining their original in-situ pressure, meeting the requirement of exploration of gas hydrate in deep-sea shallow sediment layers.