期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Applying Improved Electrical Breakdown Model to Study Insulating Property of c-C_4F_8/N_2 Gas Mixture
1
作者 LI Xue-wen XIAO Deng-ming 《高压电器》 CAS CSCD 北大核心 2011年第9期19-25,共7页
Perfluorocyclobutane(c-C4F8) has been recently considered as a potential alternative to SF6,because of its high electro-negativity and extremely low environmental effect.However,due to its high boiling point,c-C4F8 sh... Perfluorocyclobutane(c-C4F8) has been recently considered as a potential alternative to SF6,because of its high electro-negativity and extremely low environmental effect.However,due to its high boiling point,c-C4F8 should mixed with buffer gases such as N2 or CO2 in order to avoid the liquefaction at low temperature.This paper investigates insulating properties of c-C4F8/N2 gas mixtures from two aspects including electrical strength,and Global Warming Potential(GWP).Moreover,improved electrical breakdown model of gas mixtures is founded.Breakdown temperature and breakdown electrical field in gas mixtures can be obtained from rigorous Townsend criterion expression according to gas mixtures ratio and cross section data of gas mixtures in this model.Under the condition of different gas pressure(0.1~0.4 MPa),gas mixtures ratio(0~30%),and electrode gap(2~10 mm),breakdown voltages of gas mixtures are calculated by using of this model.Insulation strength of SF6/N2 mixed gas is compared with c-C4F8/N2 mixed gas in the same conditions.Research results show that theoretical computation corresponds with experiment.If the content of c-C4F8 or SF6 in mixtures is less than 30%,insulation strength between c-C4F8/N2 and SF6/N2 is very close.Considering two indexes(breakdown voltage,GWP),it is suitable for c-C4F8 content being 15%~20% in c-C4F8/N2 gas 展开更多
关键词 electrical breakdown model breakdown temperature gas mixture ratio
下载PDF
SF_(6)/N_(2)混合气体断路器弧后击穿特性研究 被引量:2
2
作者 李金儒 李静 +1 位作者 刘树鑫 李雪 《电器与能效管理技术》 2023年第4期8-14,共7页
以SF_(6)和SF_(6)/N_(2)混合气体为研究对象,建立交流电源、单一喷口、固定电极条件下的电弧模型。通过结合Mayr电弧模型的方法研究替代气体断路器弧后热击穿特性;采用两项近似法求解玻尔兹曼方程,计算混合气体临界击穿场强并与替代气... 以SF_(6)和SF_(6)/N_(2)混合气体为研究对象,建立交流电源、单一喷口、固定电极条件下的电弧模型。通过结合Mayr电弧模型的方法研究替代气体断路器弧后热击穿特性;采用两项近似法求解玻尔兹曼方程,计算混合气体临界击穿场强并与替代气体断路器模型实际场强比较,研究弧后电击穿特性。研究结果表明,在SF_(6)/N_(2)混合气体中SF_(6)含量较高时弧后击穿特性表现与纯SF_(6)气体断路器弧后击穿特性表现比较接近,说明其基本具备SF_(6)气体的弧后击穿特性,可以实现对于SF_(6)气体的替代,为SF_(6)替代气体断路器的研发提供理论依据,对于替代气体断路器重击穿问题的研究也具有参考价值。 展开更多
关键词 SF_(6)/N_(2)混合气体 热击穿 电击穿 电弧模型 临界击穿场强
下载PDF
改进的击穿模型研究c-C_4F_8/N_2混合气体绝缘性能 被引量:8
3
作者 李学文 肖登明 《上海电机学院学报》 2010年第6期334-338,共5页
从绝缘强度和温室效应指数两方面研究了八氟环丁烷(c-C4F8)混合气体的绝缘性能。建立了改进的c-C4F8及混合气体的电击穿模型,理论计算c-C4F8混合气体在不同气压、不同混合比及不同电极距离下的击穿电压,并与SF6/N2混合气体在相同条件下... 从绝缘强度和温室效应指数两方面研究了八氟环丁烷(c-C4F8)混合气体的绝缘性能。建立了改进的c-C4F8及混合气体的电击穿模型,理论计算c-C4F8混合气体在不同气压、不同混合比及不同电极距离下的击穿电压,并与SF6/N2混合气体在相同条件下进行了对比。研究结果表明:理论计算与实验结果相吻合。气体混合比在30%之内时,c-C4F8/N2混合气体绝缘强度非常接近相同混合比的SF6/N2混合气体。综合考虑温室效应指数和绝缘性能,c-C4F8混合气体中,c-C4F8气体含量以10%~20%为宜。 展开更多
关键词 电击穿模型 绝缘性能 混合气体
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部