Optimization of the Gas Generator in Composite Power System with Tip-Jet Rotor

The key and bottleneck of research on the tip-jet rotor compound helicopter lies in the power system. Computational Fluid Dynamics (CFD) was used to numerically simulate the gas generator and rotor inner passage of the tip-jet rotor composite power system, studying the effects of intake mode, inner cavity structure, propellant components, and injection amount on the characteristics of the composite power system. The results show that when a single high-temperature exhaust gas enters, the gas generator outlet fluid is uneven and asymmetric;when two-way high-temperature exhaust gas enters, the outlet temperature of the gas generator with a tilted inlet is more uniform than that with a vertical inlet;adding an inner cavity improves the temperature and velocity distribution of the gas generator's internal flow field;increasing the energy of the propellant is beneficial for improving the available moment.

Optimization of Gas Sensing Performance of Nanocrystalline SnO_2 Thin Films Synthesized by Magnetron Sputtering

Tin oxide （SnO2） is one of the most promising transparent conducting oxide materials, which is widely used in thin film gas sensors. We investigate the dependence of the deposition time on structural, morphologicaJ and hydrogen gas sensing properties of SnO2 thin films synthesized by dc magnetron sputtering. The deposited samples are characterized by XRD, SEM, AFM, surface area measurements and surface profiler. Also the H2 gas sensing properties of SnO2 deposited samples are performed against a wide range of operating temperature. The XRD analysis demonstrates that the degree of crystallinity of the deposited SnO2 films strongly depends on the deposition time. SEM and AFM analyses reveal that the size of nanoparticles or agglomerates, and both average and rms surface roughness is enhanced with the increasing deposition time. Also gas sensors based on these SnO2 nanolayers show an acceptable response to hydrogen at various operating temperatures.

Medium oxygen enriched blast furnace with top gas recycling strategy

Top gas recycling oxygen blast furnace（TGR-OBF）process is a promising ironmaking process.The biggest challenge of the TGR-OBF in operation is the dramatic decrease of top gas volume（per ton hot metal）,which once led to hanging-up and shutdowns in practice of the Toulachermet.In order to avoid this weakness,the strategy of medium oxygen blast furnace was presented.The maneuverable zone of the TGR-OBF was determined by the top gas volume,which should not be far from the data of the traditional blast furnace.The deviation of ±12.5% was used,and then the maneuverable blast oxygen content is from 0.30 to 0.47 according to the calculation.The flame temperature and the top gas volume have no much difference compared to those of the traditional blast furnace.The minimum carbon consumption of 357 kg per ton hot metal in the maneuverable zone occurs at the oxygen content of 0.30（fuel saving of 14%）.In the unsteady evolution,the N2 accumulation could approach nearly zero after the recycling reached 6 times.Thus far,some TGR-OBF industrial trials have been carried out in different countries,but the method of medium oxygen enriched TGR-OBF has not been implemented,because the accumulation of N2 was worried about.The presented strategy of medium oxygen enriched TGR-OBF is applicable and the strategy with good operational performance is strongly suggested as a forerunner of the full oxygen blast furnace.

Short-term Scheduling of Steam Power System in Iron and Steel Industry under Time-of-use Power Price

A generalized formulation for short-term scheduling of steam power system in iron and steel industry under the time-of-use（TOU）power price was presented,with minimization of total operational cost including fuel cost,equipment maintenance cost and the charge of exchange power with main grid.The model took into account the varying nature of surplus byproduct gas flows,several practical technical constraints and the impact of TOU power price.All major types of utility equipments,involving boilers,steam turbines,combined heat and power（CHP）units,and waste heat and energy recovery generators（WHERG）,were separately modeled using thermodynamic balance equations and regression method.In order to solve this complex nonlinear optimization model,a new improved particle swarm optimization（IPSO）algorithm was proposed by incorporating time-variant parameters,a selfadaptive mutation scheme and efficient constraint handling strategies.Finally,a case study for a real industrial example was used for illustrating the model and validating the effectiveness of the proposed approach.

Application and evaluation of payment channel in hybrid decentralized ethereum token exchange

Traditional centralized token exchange(CEX)has been suffering from hacking due to the centralized management of users’tokens.In contrast,decentralized token exchange(DEX)maintains users’assets by smart contracts in a decentralized manner,but introduces additional overhead in terms of gas fee and transaction confirmation latency.Hybrid decentralized token exchange(HEX)has been proposed to combine the benefits of CEX and DEX.However,existing HEX is criticized for two issues.First,trading transactions are time-consuming and expensive for frequent token traders.Second,excessive simultaneous transactions might cause the pending transaction congestion in the Ethereum network.In this paper,we propose a payment channel based HEX,which extends existing solutions by adding a new payment channel layer to benefit frequent traders and alleviate the pending transaction congestion.Besides,we propose the very first gas-price vs.transactionconfirmation-latency function to guide Ethereum transaction issuers to choose an optimal gas price that minimizes the overall cost.Extensive simulations are conducted to compare the cost in the proposed HEX with that in the conventional HEX.The results demonstrate the effectiveness of our proposed mechanism in terms of reducing gas fees and transaction confirmation latency for frequent traders as well as the pending transaction congestion in Ethereum.