Gas pressurized fan speed control and remote monitoring was achieved based on three sets of gas pressure MM440 frequency converter control system, through the Profibus-DP network transmission of exchange data and sign...Gas pressurized fan speed control and remote monitoring was achieved based on three sets of gas pressure MM440 frequency converter control system, through the Profibus-DP network transmission of exchange data and signal instructions. In operation, one converter which adopted ＂ power-off reset＂ has broken down, so as to cause two other gas pressurized frequency converter tripping. This paper proposed method to achieve capture and process failures, and application to converter control system. The result shows that the present method solves the fault, improves the system operation stability and meets the requirement of production.展开更多
Natural gas occupies an increasingly important position in the structure of global energy resources. In order to adapt to the fast developments in natural gas chemistry and hydrogen energy, and to accelerate further t...Natural gas occupies an increasingly important position in the structure of global energy resources. In order to adapt to the fast developments in natural gas chemistry and hydrogen energy, and to accelerate further the reporting of research and development information in natural gas chemistry and related areas, the publication duration of the Journal of Natural Gas Chemistry （JNGC） will be shortened to appear bimonthly instead of quarterly in 2010.展开更多
The hot compressive deformation behavior of hot isostatically pressed Ti-47.5Al-2Cr-2Nb-0.2W-0.2B alloy using gas atomization powders was systematically investigated and the processing map was obtained in the temperat...The hot compressive deformation behavior of hot isostatically pressed Ti-47.5Al-2Cr-2Nb-0.2W-0.2B alloy using gas atomization powders was systematically investigated and the processing map was obtained in the temperature range of 1323-1473 Kand strain rate range of 0.001-0.5s^（-1）.The calculated activation energy in the above variational ranges of temperature and strain rate possesses a low activation energy value of approximately 365.6kJ/mol based on the constitutive relationship models developed with the Arrhenius-type constitutive model respectively considering the strain rate and deformation temperature.The hot working flow behavior during the deformation process was analyzed combined with the microstructural evolution.Meanwhile,the processing maps during the deformation process were established based on the dynamic material model and Prasad instability criterion under different deformation conditions.Finally,the optimal hot processing window of this alloy corresponding to the wide temperature range of 1353-1453 Kand the low strain rate of 0.001-0.1s^（-1） was obtained.展开更多
文摘Gas pressurized fan speed control and remote monitoring was achieved based on three sets of gas pressure MM440 frequency converter control system, through the Profibus-DP network transmission of exchange data and signal instructions. In operation, one converter which adopted ＂ power-off reset＂ has broken down, so as to cause two other gas pressurized frequency converter tripping. This paper proposed method to achieve capture and process failures, and application to converter control system. The result shows that the present method solves the fault, improves the system operation stability and meets the requirement of production.
文摘Natural gas occupies an increasingly important position in the structure of global energy resources. In order to adapt to the fast developments in natural gas chemistry and hydrogen energy, and to accelerate further the reporting of research and development information in natural gas chemistry and related areas, the publication duration of the Journal of Natural Gas Chemistry （JNGC） will be shortened to appear bimonthly instead of quarterly in 2010.
基金the financial supports from the National Natural Science Foundation of China(Grant Nos.51301157 and 51434007)the National High Technology Research and Development Program of China 863 Program(Grant No.2013AA031103)
文摘The hot compressive deformation behavior of hot isostatically pressed Ti-47.5Al-2Cr-2Nb-0.2W-0.2B alloy using gas atomization powders was systematically investigated and the processing map was obtained in the temperature range of 1323-1473 Kand strain rate range of 0.001-0.5s^（-1）.The calculated activation energy in the above variational ranges of temperature and strain rate possesses a low activation energy value of approximately 365.6kJ/mol based on the constitutive relationship models developed with the Arrhenius-type constitutive model respectively considering the strain rate and deformation temperature.The hot working flow behavior during the deformation process was analyzed combined with the microstructural evolution.Meanwhile,the processing maps during the deformation process were established based on the dynamic material model and Prasad instability criterion under different deformation conditions.Finally,the optimal hot processing window of this alloy corresponding to the wide temperature range of 1353-1453 Kand the low strain rate of 0.001-0.1s^（-1） was obtained.
