CO_(2)storage with enhanced gas recovery(CSEGR):A review of experimental and numerical studies

CO_(2)emission mitigation is one of the most critical research frontiers.As a promising option of carbon capture,utilization and storage(CCUS),CO_(2)storage with enhanced gas recovery(CSEGR)can reduce CO_(2)emission by sequestrating it into gas reservoirs and simultaneously enhance natural gas production.Over the past decades,the displacement behaviour of CO_(2)—natural gas has been extensively studied and demonstrated to play a key role on both CO_(2)geologic storage and gas recovery performance.This work thoroughly and critically reviews the experimental and numerical simulation studies of CO_(2)displacing natural gas,along with both CSEGR research and demonstration projects at various scales.The physical property difference between CO_(2)and natural gas,especially density and viscosity,lays the foundation of CSEGR.Previous experiments on displacement behaviour and dispersion characteristics of CO_(2)/natural gas revealed the fundamental mixing characteristics in porous media,which is one key factor of gas recovery efficiency and warrants further study.Preliminary numerical simulations demonstrated that it is technically and economically feasible to apply CSEGR in depleted gas reservoirs.However,CO_(2)preferential flow pathways are easy to form(due to reservoir heterogeneity)and thus adversely compromise CSEGR performance.This preferential flow can be slowed down by connate or injected water.Additionally,the optimization of CO_(2)injection strategies is essential for improving gas recovery and CO_(2)storage,which needs further study.The successful K12—B pilot project provides insightful field-scale knowledge and experience,which paves a good foundation for commercial application.More experiments,simulations,research and demonstration projects are needed to facilitate the maturation of the CSEGR technology.

Coupled thermo-hydro-mechanical simulation of CO2 enhanced gas recovery with an extended equation of state module for TOUGH2MP-FLAC3D

As one of the most important ways to reduce the greenhouse gas emission,carbon dioxide（CO2）enhanced gas recovery（CO2-EGR） is attractive since the gas recovery can be enhanced simultaneously with CO2sequestration.Based on the existing equation of state（EOS） module of TOUGH2 MP,extEOS7C is developed to calculate the phase partition of H2O-CO2-CH4-NaCl mixtures accurately with consideration of dissolved NaCI and brine properties at high pressure and temperature conditions.Verifications show that it can be applied up to the pressure of 100 MPa and temperature of 150℃.The module was implemented in the linked simulator TOUGH2MP-FLAC3 D for the coupled hydro-mechanical simulations.A simplified three-dimensional（3D）1/4 model（2.2 km×1 km×1 km） which consists of the whole reservoir,caprock and baserock was generated based on the geological conditions of a gas field in the North German Basin.The simulation results show that,under an injection rate of 200,000 t/yr and production rate of 200,000 sm3/d,CO2breakthrough occurred in the case with the initial reservoir pressure of 5 MPa but did not occur in the case of 42 MPa.Under low pressure conditions,the pressure driven horizontal transport is the dominant process;while under high pressure conditions,the density driven vertical flow is dominant.Under the considered conditions,the CO2-EGR caused only small pressure changes.The largest pore pressure increase（2 MPa） and uplift（7 mm） occurred at the caprock bottom induced by only CO2injection.The caprock had still the primary stress state and its integrity was not affected.The formation water salinity and temperature variations of ±20℃ had small influences on the CO2-EGR process.In order to slow down the breakthrough,it is suggested that CO2-EGR should be carried out before the reservoir pressure drops below the critical pressure of CO2.

Qualification Test for the Reliability of Diver Gas Recovery System

A qualification test for the reliability of a newly-developed Diver Gas Recovery System (DGRS) was carried out in the Naval Medical Research Institute of the People's Liberation Army, China from March 29 to April 2, 1995. A sequential test plan of high discrimination ratio for the mean time between failures (MTBF) was adopted. The test procedures simulated those of a 300 msw dive. A hyperbaric breathing machine was used for the simulation of diver's respiratory functions. Parameters, such as diving depth, respiratory minute volume (RMV), CO2 production, gas flow rate, partial pressure of carbon dioxide, and ambient temperature and himidity were all displayed and recorded with a microcomputer system. The results indicated that no failure occurred during the 91.5 h operation. According to the acceptance and rejection criteria specified in the statistical test plan, a no-failure score in the 88 h operation is acceptable. Therefore, the DGRS has been demonstrated to meet the requirements of MTBF specified in the contract.

Manned Testing of the Diver Gas Recovery Installation

The Diver Gas Recovery Installation (DGRI) was evaluated at 80 msw saturation - 100 msw excursion diving on HeO2 in the Naval Medical Research Institute (NMRI) of China in April, 1995. The diving depth, lockout time, breathing gas flow rate and consumption, inspired oxygen partial pressure (PO2) and carbon dioxide partial pressure (PCO2) were monitored. The results indicated that PO2 was controlled to fluctuate from 64.3 to 84.0 kPa and PCO2 went up from 0.01 kPa up to O.I kPa during 4 hours excursion diving; recovery of breathing gas reached 95%; three divers felt well and breathed comfortably during simulating heavy work. The test showed that it met desired performance goals. The DGRI is a kind of important equipment for long duration deep dive. It enables the gases exhaled by the divers to be re-cycled, and therefore it has great social, military and economic significance for diving operation and submarine rescue.

Application of supervised machine learning to predict the enhanced gas recovery by CO_(2) injection in shale gas reservoirs

The technique of Enhanced Gas Recovery by CO_(2) injection(CO_(2)-EGR)into shale reservoirs has brought increasing attention in the recent decade.CO_(2)-EGR is a complex geophysical process that is controlled by several parameters of shale properties and engineering design.Nevertheless,more challenges arise when simulating and predicting CO_(2)/CH4 displacement within the complex pore systems of shales.Therefore,the petroleum industry is in need of developing a cost-effective tool/approach to evaluate the potential of applying CO_(2) injection to shale reservoirs.In recent years,machine learning applications have gained enormous interest due to their high-speed performance in handling complex data and efficiently solving practical problems.Thus,this work proposes a solution by developing a supervised machine learning(ML)based model to preliminary evaluate CO_(2)-EGR efficiency.Data used for this work was drawn across a wide range of simulation sensitivity studies and experimental investigations.In this work,linear regression and artificial neural networks(ANNs)implementations were considered for predicting the incremental enhanced CH4.Based on the model performance in training and validation sets,our accuracy comparison showed that(ANNs)algorithms gave 15%higher accuracy in predicting the enhanced CH4 compared to the linear regression model.To ensure the model is more generalizable,the size of hidden layers of ANNs was adjusted to improve the generalization ability of ANNs model.Among ANNs models presented,ANNs of 100 hidden layer size gave the best predictive performance with the coefficient of determination(R2)of 0.78 compared to the linear regression model with R2 of 0.68.Our developed MLbased model presents a powerful,reliable and cost-effective tool which can accurately predict the incremental enhanced CH4 by CO_(2) injection in shale gas reservoirs.

CO_(2),N_(2),and CO_(2)/N_(2)mixed gas injection for enhanced shale gas recovery and CO_(2)geological storage

In this work,using fractured shale cores,isothermal adsorption experiments and core flooding tests were conducted to investigate the performance of injecting different gases to enhance shale gas recovery and CO_(2)geological storage efficiency under real reservoir conditions.The adsorption process of shale to different gases was in agreement with the extended-Langmuir model,and the adsorption capacity of CO_(2)was the largest,followed by CH_(4),and that of N_(2)was the smallest of the three pure gases.In addition,when the CO_(2)concentration in the mixed gas exceeded 50%,the adsorption capacity of the mixed gas was greater than that of CH4,and had a strong competitive adsorption effect.For the core flooding tests,pure gas injection showed that the breakthrough time of CO_(2)was longer than that of N_(2),and the CH_(4)recovery factor at the breakthrough time(Rch,)was also higher than that of N_(2).The RcH of CO_(2)gas injection was approximately 44.09%,while the RcH,of N_(2)was only 31.63%.For CO_(2)/N_(2)mixed gas injection,with the increase of CO_(2)concentration,the RcH,increased,and the RcH,for mixed gas CO_(2)/N_(2)=8:2 was close to that of pure CO_(2),about 40.24%.Moreover,the breakthrough time of N_(2)in mixed gas was not much different from that when pure N_(2)was injected,while the breakthrough time of CO_(2)was prolonged,which indicated that with the increase of N_(2)concentration in the mixed gas,the breakthrough time of CO_(2)could be extended.Furthermore,an abnormal surge of N_(2)concentration in the produced gas was observed after N_(2)breakthrough.In regards to CO_(2)storage efficiency(S_(Storage-CO_(2)),as the CO_(2)concentration increased,S storage-co_(2)also increased.The S storage-co_(2),of the pure CO_(2)gas injection was about 35.96%,while for mixed gas CO_(2)/N_(2)=8:2,S sorage-co,was about 32.28%.

Simulation and visualization of the displacement between CO2 and formation fluids at pore-scale levels and its application to the recovery of shale gas

This article reports recent developments and advances in the simulation of the CO2-formation fluid displacement behaviour at the pore scale of subsurface porous media. Roughly, there are three effective visualization approaches to detect and observe the CO2-formation fluid displacement mechanism at the micro-scale, namely, magnetic resonance imaging, X-ray computed tomography and fabricated micromodels, but they are not capable of investigating the dis- placement process at the nano-scale. Though a lab-on-chip approach for the direct visualization of the fluid flow behaviour in nanoscale channels has been developed using an advanced epi-fluorescence microscopy method combined with a nanofluidic chip, it is still a qualitative analysis method. The lattice Boltzmann method （LBM） can simulate the CO2 displacement processes in a two-dimensional or three-dimensional （3D） pore structure, but until now, the CO2 displace- ment mechanisms had not been thoroughly investigated and the 3D pore structure of real rock had not been directly taken into account in the simulation of the CO2 displacement process. The status of research on the applications of CO2 displacement to enhance shale gas recovery is also analyzed in this paper. The coupling of molecular dynamics and LBM in tandem is proposed to simulate the CO2-shale gas displacement process based on the 3D digital model of shale obtained from focused ion beams and scanning electron microscopy.

Experimental Study of the Recovery Times of Spark Gap Switch with Different Gases

A two-pulse method is used to determine the insulation recovery time of the gas spark gap switch with different types of gas applied in a high power accelerator with a water dielectric pulse forming line. At the breakdown voltage of 450 kV, with the vacuum diode voltage of about 200 kV, and a current of 30 kA, recovery characteristics of H2, N2, SF6 were studied. The recovery percentages of the gas breakdown voltage and vacuum diode voltage were determined. The results show that hydrogen has the best recovery characteristics. At a pulse interval of 8.8 ms, the recovery percentages of both the gas breakdown voltage and vacuum diode voltage for hydrogen exceed 95%. For SF6 and N2 with an interval of 25 ms and 50 ms respectively, a 90% voltage recovery was obtained. The experiments also proved that the repetitive rate of the high power accelerator with a pulse forming line is mainly restricted by the gas switch repetitive rate; the recovery percentages of the vacuum diode voltage are limited by the recovery percentages of the gas switch breakdown voltage. The hydrogen switch can be employed for a high repetitive rate-high power accelerator with a pulse forming line.

Performance of free gases during the recovery enhancement of shale gas by CO_(2) injection:a case study on the depleted Wufeng–Longmaxi shale in northeastern Sichuan Basin,China

In this work, a novel thermal–hydraulic–mechanical (THM) coupling model is developed, where the real geological parameters of the reservoir properties are embedded. Accordingly, nine schemes of CO_(2) injection well (IW) and CH_(4) production well (PW) are established, aiming to explore the behavior of free gases after CO_(2) is injected into the depleted Wufeng–Longmaxi shale. The results indicate the free CH4 or CO2 content in the shale fractures/matrix is invariably heterogeneous. The CO_(2) involvement facilitates the ratio of free CH_(4)/CO_(2) in the matrix to that in the fractures declines and tends to be stable with time. Different combinations of IW–PWs induce a difference in the ratio of the free CH4 to the free CO_(2), in the ratio of the free CH_(4)/CO_(2) in the matrix to that in the fractures, in the content of the recovered free CH_(4), and in the content of the trapped free CO_(2). Basically, when the IW locates at the bottom Wufeng–Longmaxi shale, a farther IW–PWs distance allows more CO2 in the free phase to be trapped;furthermore, no matter where the IW is, a shorter IW–PWs distance benefits by getting more CH_(4) in the free phase recovered from the depleted Wufeng–Longmaxi shale. Hopefully, this work is helpful in gaining knowledge about the shale-based CO_(2) injection technique.

Enhancing recovery and sensitivity studies in an unconventional tight gas condensate reservoir

The recovery factor from tight gas reservoirs is typically less than 15%, even with multistage hydrauhc tractunng stimulation. Such low recovery is exacerbated in tight gas condensate reservoirs, where the depletion of gas leaves the valuable condensate behind. In this paper, three enhanced gas recovery （EGR） methods including produced gas injection, CO2 injection and water injection are investigated to increase the well productivity for a tight gas condensate reservoir in the Montney Formation, Canada. The production performance of the three EGR methods is compared and their economic feasibility is evaluated. Sensitivity analysis of the key factors such as primary production duration, bottom-hole pressures, and fracture conductivity is conducted and their effects on the well production performance are analyzed. Results show that, compared with the simple depletion method, both the cumulative gas and condensate production increase with fluids injected. Produced gas injection leads to both a higher gas and condensate production compared with those of the CO2 injection, while waterflooding suffers from injection difficulty and the corresponding low sweep efficiency. Meanwhile, the injection cost is lower for the produced gas injection due to the on-site available gas source and minimal transport costs, gaining more economic benefits than the other EGR methods.

Experimental and modeling study of CO_(2)-Improved gas recovery in gas condensate reservoir

This paper presents the effectiveness of the CO_(2) injection process at different periods during gascondensate reservoir development.Taking a real gas-condensate reservoir located in China's east region as an example,first,we conducted experiments of constant composition expansion(CCE),constant volume depletion(CVD),saturation pressure determination,and single flash.Next,a series of water/CO2 flooding experiments were been investigated,including water flooding at present pressure 15 MPa,CO_(2) flooding at 25.53 MPa,15 MPa,which repents initial pressure and present pressure respectively.Finally,the core flooding numerical model was constructed using a generalized equation-of-state model reservoir simulator(GEM)to reveal miscible flooding mechanism and the seepage flow characteristics in the condensate gas reservoir with CO2 injection.A desirable agreement achieved in experimental results and predicted pressure volume temperature(PVT)properties by the modified equation of state(EOS)in the CVD and CCE tests indicated that the proposed recombination method can successfully produce a fluid with the same phase behavior of initial reservoir fluid with an acceptable accuracy.The modeling results confirm the experimental results,and both methods indicate that significant productivity loss can occur in retrograde gas condensate reservoirs when the flowing bottom-hole pressure falls below dew point pressure.Moreover,the results show that CO_(2) treatment can improve gas productivity by a factor of about 1.39 compared with the water flooding mode.These results may help reservoir engineers and specialists to restore the lost productivity of gas condensate.

A reservoir drying method for enhancing recovery of tight gas

Based on the study of damage mechanisms of generalized water blocking and related water-blocking removal methods, the drying agents for enhancing tight gas reservoir recovery were developed, and the basic properties, injection mode and drying effect of the drying agents were evaluated. The chemical effect, thermal effect, salt resistance, salt resistance formulas and delay mechanism of the drying agent systems for different types of tight reservoirs were investigated through lab experiment. The solubility and solubilization properties of supercritical carbon dioxide on drying agent systems were tested.The injection mode of dissolving drying agent in supercritical carbon dioxide was proposed. The mechanisms of supercritical carbon dioxide with water in micropores of formation matrix were analyzed. Micro-pore structures and seepage characteristics of reservoir before and after drying were compared. Based on the characterization in combination of NMR and laser etched pore structure model, drying effects of the drying agents on bound water of different occurrences were evaluated qualitatively and quantitatively. Lattice Boltzmann method was used to evaluate the influence of drying effect on gas micro-seepage ability.The influence of drying effect on productivity and production performance of gas well was analyzed by numerical simulation.The drying effect can greatly reduce water saturation of tight reservoir and improve the gas seepage capacity in near wellbore and fractures. This work can provide guidance for developing new measures in enhancing recovery of tight gas reservoirs.

A Novel Process for Natural Gas Liquids Recovery from Oil Field Associated Gas with Liquefied Natural Gas Cryogenic Energy Utilization

A novel process to recovery natural gas liquids from oil field associated gas with liquefied natural gas (LNG)cryogenic energy utilization is proposed.Compared to the current electric refrigeration process,the proposed process uses the cryogenic energy of LNG and saves 62.6%of electricity.The proposed process recovers ethane, liquid petroleum gas(propane and butane)and heavier hydrocarbons,with total recovery rate of natural gas liquids up to 96.8%.In this paper,exergy analysis and the energy utilization diagram method(EUD)are used to assess the new process and identify the key operation units with large exergy loss.The results show that exergy efficiency of the new process is 44.3%.Compared to the electric refrigeration process,exergy efficiency of the new process is improved by 16%.The proposed process has been applied and implemented in a conceptual design scheme of the cryogenic energy utilization for a 300 million tons/yr LNG receiving terminal in a northern Chinese harbor.

Experiment Study on the Exhaust-Gas Heat Exchanger for Small and Medium-Sized Marine Diesel Engine

This paper aims to design a special exchanger to recover the exhaust gas heat of marine diesel engines used in small and medium-sized fishing vessels,which can then be used to heat water up to 55°C–85°C for membrane desalination devices to produce fresh water.A new exhaust-gas heat exchanger of fins and tube,with a reinforced heat transfer tube section,unequal spacing fins,a mixing zone between the fin groups and four routes tube bundle,was designed.Numerical simulations were also used to provide reference information for structural design.Experiments were carried out for exhaust gas waste heat recovery from a marine diesel engine in an engine test bench utilizing the heat exchanger.The experimental results show that the difference between heat absorption by water and heat reduction of exhaust gas is less than 6.5%.After the water flow rate was adjusted,the exhaust gas waste heat recovery efficiency was higher than 70%,and the exhaust-gas heat exchanger’s outlet water temperature was 55°C–85°C at different engine loads.This means that the heat recovery from the exhaust gas of a marine diesel engine meets the requirement to drive a membrane desalination device to produce fresh water for fishers working in small and medium-sized fishing vessels.

Water coning mechanism in Tarim fractured sandstone gas reservoirs

The problem of water coning into the Tarim fractured sandstone gas reservoirs becomes one of the major concerns in terms of productivity, increased operating costs and environmental effects. Water coning is a phenomenon caused by the imbalance between gravity and viscous forces around the completion interval. There are several controllable and uncontrollable parameters influencing this problem. In order to simulate the key parameters affecting the water coning phenomenon, a model was developed to represent a single well with an underlying aquifer using the fractured sandstone gas reservoir data of the A-Well in Dina gas fields.The parametric study was performed by varying six properties individually over a representative range. The results show that matrix permeability, well penetration(especially fracture permeability), vertical-to-horizontal permeability ratio, aquifer size and gas production rate have considerable effect on water coning in the fractured gas reservoirs. Thus, investigation of the effective parameters is necessary to understand the mechanism of water coning phenomenon. Simulation of the problem helps to optimize the conditions in which the breakthrough of water coning is delayed.

An experimental and numerical study of chemically enhanced water alternating gas injection

In this work, an experimental study combined with numerical simulation was conducted to investigate the potential of chemically enhanced water alternating gas （CWAG） injection as a new enhanced oil recovery method. The unique feature of this new method is that it uses alkaline, surfactant, and polymer additives as a chemical slug which is injected during the water alternating gas （WAG） process to reduce the interfacial tension （IFT） and simultaneously improve the mobility ratio. In essence, the proposed CWAG process involves a combination of chemical flooding and immiscible carbon dioxide （CO2） injection and helps in IFT reduction, water blocking reduction, mobility control, oil swelling, and oil viscosity reduction due to CO2 dissolution. Its performance was compared with the conventional immiscible water alter- nating gas （I-WAG） flooding. Oil recovery utilizing CWAG was better by 26 % of the remaining oil in place after waterflooding compared to the recovery using WAG conducted under similar conditions. The coreflood data （cumulative oil and water production） were history mat- ched via a commercial simulator by adjusting the relative permeability curves and assigning the values of the rock and fluid properties such as porosity, permeability, and the experimentally determined IFT data. History matching ofthe coreflood model helped us optimize the experiments and was useful in determining the importance of the parameters influencing sweep efficiency in the CWAG process. The effectiveness of the CWAG process in pro- viding enhancement of displacement efficiency is evident in the oil recovery and pressure response observed in the coreflood. The results of sensitivity analysis on CWAG slug patterns show that the alkaline-surfactant-polymer injection is more beneficial after CO2 slug injection due to oil swelling and viscosity reduction. The CO2 slug size analysis shows that there is an optimum CO2 slug size, around 25 % pore volume which leads to a maximum oil recovery in the CWAG process. This study shows that the ultralow IFT system, i.e., IFT equaling 10 2 or 10 3 mN/ m, is a very important parameter in CWAG process since the water blocking effect can be minimized.

Technical Measures and Selections for Reducing Flue Gas Heat Loss of Large Coal-Fired Boilers

The main technologies for reducing flue gas heat loss of pulverized coal-fired boilers are introduced, and the suitability of these technologies for boiler operation and the principles for selection of these technologies are explored. The main conclusions are： 1） the non-equilibrium control over flue gas flow rates at the inlet of the air heater and the reversal rotation of the air heater rotator should be popularized as regular technologies in large boilers; 2） increasing the area of the air heater to reduce the flue gas heat loss in pulverized coal-fired boilers should be the top option and increasing the area of the economizer be the next choice; 3） low- pressure economizer technology could save energy under special conditions and should be compared with the technology of increasing economizer area in terms of technical economics when the latter is feasible; 4） the hot primary air heater is only suitable to the pnlvefizing system with a large amount of cold air mixed.

Effect of hydraulic fracture deformation hysteresis on CO_(2)huff-n-puff performance in shale gas reservoirs

As a promising enhanced gas recovery technique,CO_(2)huff-n-puff has attracted great attention recently.However,hydraulic fracture deformation hysteresis is rarely considered,and its effect on CO_(2)huff-n-puff performance is not well understood.In this study,we present a fully coupled multi-component flow and geomechanics model for simulating CO_(2)huff-n-puff in shale gas reservoirs considering hydraulic fracture deformation hysteresis.Specifically,a shale gas reservoir after hydraulic fracturing is modeled using an efficient hybrid model incorporating an embedded discrete fracture model(EDFM),multiple porosity model,and single porosity model.In flow equations,Fick’s law,extended Langmuir isotherms,and the Peng-Robinson equation of state are used to describe the molecular diffusion,multi-component adsorption,and gas properties,respectively.In relation to geomechanics,a path-dependent constitutive law is applied for the hydraulic fracture deformation hysteresis.The finite volume method(FVM)and the stabilized extended finite element method(XFEM)are applied to discretize the flow and geomechanics equations,respectively.We then solve the coupled model using the fixed-stress split iterative method.Finally,we verify the presented method using several numerical examples,and apply it to investigate the effect of hydraulic fracture deformation hysteresis on CO_(2)huff-n-puff performance in a 3D shale gas reservoir.Numerical results show that hydraulic fracture deformation hysteresis has some negative effects on CO_(2)huff-n-puff performance.The effects are sensitive to the initial conductivity of hydraulic fracture,production pressure,starting time of huff-n-puff,injection pressure,and huff-n-puff cycle number.

Low-field NMR application in the characterization of CO_(2)geological storage and utilization related to shale gas reservoirs:a brief review

CO_(2)geological storage and utilization(CGSU)is considered a far-reaching technique to meet the demand of increasing energy supply and decreasing CO_(2)emissions.For CGSUs related to shale gas reservoirs,experimental investigations have attracted variable methodologies,among which low-field NMR(LF-NMR)is a promising method and is playing an increasingly key role in reservoir characterization.Herein,the application of this nondestructive,sensitive,and quick LF-NMR technique in characterizing CGSU behavior in shale gas reservoirs is reviewed.First,the basic principle of LF-NMR for 1H-fluid detection is introduced,which is the theoretical foundation of the reviewed achievements in this paper.Then,the reviewed works are related to the LF-NMR-based measurements of CH_(4)adsorption capacity and the CO_(2)-CH_(4)interaction in shale,as well as the performance on CO_(2)sequestration and simultaneous enhanced gas recovery from shale.Basically,the reviewed achievements have exhibited a large potential for LF-NMR application in CGSUs related to shale gas reservoirs,although some limitations and deficiencies still need to be improved.Accordingly,some suggestions are proposed for a more responsible development of the LF-NMR technique.Hopefully,this review is helpful in promoting the expanding application of the LF-NMR technique in CGSU implementation in shale gas reservoirs.

Waste heat recovery and denitrification of flue gases from gas-fired boilers

A waste heat recovery and denitrification system was developed for improving energy conservation and emissions control especially for control of PM2.5 particles and haze. The system uses enhanced heat and mass transfer techniques in a packed heat exchange tower with self-rotation and zero-pressure spraying, low temperature NO oxidation by ozone, and neutralization with an alkali solution. Operating data in a test project gave NOx in the exhaust flue gas of less than 30 mg/Nm3 with an ozone addition rate of 8 kg/h and spray water p H of 7.5–8, an average heat recovery of 3 MW, and an average heat supply of 7.2 MW.