MXene Key Composites:A New Arena for Gas Sensors

With the development of science and technology,the scale of industrial production continues to grow,and the types and quantities of gas raw materials used in industrial production and produced during the production process are also constantly increasing.These gases include flammable and explosive gases,and even contain toxic gases.Therefore,it is very important and necessary for gas sensors to detect and monitor these gases quickly and accurately.In recent years,a new two-dimensional material called MXene has attracted widespread attention in various applications.Their abundant surface functional groups and sites,excellent current conductivity,tunable surface chemistry,and outstanding stability make them promising for gas sensor applications.Since the birth of MXene materials,researchers have utilized the efficient and convenient solution etching preparation,high flexibility,and easily functionalize MXene with other materials to pre-pare composites for gas sensing.This has opened a new chapter in high-performance gas sensing materials and provided a new approach for advanced sensor research.However,previous reviews on MXene-based composite materials in gas sensing only focused on the performance of gas sensing,without systematically explaining the gas sensing mechanisms generated by different gases,as well as summarizing and predicting the advantages and disadvantages of MXene-based composite materials.This article reviews the latest progress in the application of MXene-based composite materials in gas sensing.Firstly,a brief summary was given of the commonly used methods for preparing gas sens-ing device structures,followed by an introduction to the key attributes of MXene related to gas sensing performance.This article focuses on the performance of MXene-based composite materials used for gas sensing,such as MXene/graphene,MXene/Metal oxide,MXene/Transition metal sulfides(TMDs),MXene/Metal-organic framework(MOF),MXene/Polymer.It summarizes the advantages and disadvantages of MXene com-posite materials with different composites and discusses the possible gas sensing mechanisms of MXene-based composite materials for different gases.Finally,future directions and inroads of MXenes-based composites in gas sensing are presented and discussed.

Advances in Noble Metal-Decorated Metal Oxide Nanomaterials for Chemiresistive Gas Sensors:Overview

Highly sensitive gas sensors with remarkably low detection limits are attractive for diverse practical application fields including real-time environmental monitoring,exhaled breath diagnosis,and food freshness analysis.Among various chemiresistive sensing materials,noble metal-decorated semiconducting metal oxides(SMOs)have currently aroused extensive attention by virtue of the unique electronic and catalytic properties of noble metals.This review highlights the research progress on the designs and applications of different noble metal-decorated SMOs with diverse nanostructures(e.g.,nanoparticles,nanowires,nanorods,nanosheets,nanoflowers,and microspheres)for high-performance gas sensors with higher response,faster response/recovery speed,lower operating temperature,and ultra-low detection limits.The key topics include Pt,Pd,Au,other noble metals(e.g.,Ag,Ru,and Rh.),and bimetals-decorated SMOs containing ZnO,SnO_(2),WO_(3),other SMOs(e.g.,In_(2)O_(3),Fe_(2)O_(3),and CuO),and heterostructured SMOs.In addition to conventional devices,the innovative applications like photo-assisted room temperature gas sensors and mechanically flexible smart wearable devices are also discussed.Moreover,the relevant mechanisms for the sensing performance improvement caused by noble metal decoration,including the electronic sensitization effect and the chemical sensitization effect,have also been summarized in detail.Finally,major challenges and future perspectives towards noble metal-decorated SMOs-based chemiresistive gas sensors are proposed.

Atomic layer deposition to heterostructures for application in gas sensors

Atomic layer deposition(ALD) is a versatile technique to deposit metals and metal oxide sensing materials at the atomic scale to achieve improved sensor functions. This article reviews metals and metal oxide semiconductor(MOS) heterostructures for gas sensing applications in which at least one of the preparation steps is carried out by ALD. In particular, three types of MOS-based heterostructures synthesized by ALD are discussed, including ALD of metal catalysts on MOS, ALD of metal oxides on MOS and MOS core–shell(C–S) heterostructures.The gas sensing performances of these heterostructures are carefully analyzed and discussed.Finally, the further developments required and the challenges faced by ALD for the synthesis of MOS gas sensing materials are discussed.

Achieving highly-efficient H2S gas sensor by flower-like SnO_(2)–SnO/porous GaN heterojunction

A flower-like SnO_(2)–SnO/porous Ga N(FSS/PGaN) heterojunction was fabricated for the first time via a facile spraying process, and the whole process also involved hydrothermal preparation of FSS and electrochemical wet etching of GaN,and SnO_(2)–SnO composites with p–n junctions were loaded onto PGaN surface directly applied to H_(2)S sensor. Meanwhile,the excellent transport capability of heterojunction between FSS and PGaN facilitates electron transfer, that is, a response time as short as 65 s and a release time up to 27 s can be achieved merely at 150℃ under 50 ppm H_(2)S concentration, which has laid a reasonable theoretical and experimental foundation for the subsequent PGaN-based heterojunction gas sensor.The lowering working temperature and high sensitivity(23.5 at 200 ppm H2S) are attributed to the structure of PGaN itself and the heterojunction between SnO_(2)–SnO and PGaN. In addition, the as-obtained sensor showed ultra-high test stability.The simple design strategy of FSS/PGaN-based H_(2)S sensor highlights its potential in various applications.

Design of Gas Sensors Circuits with in-System Programmable Ddevices

In-system programmable devices are products that combined modern electronic techniques and semiconductor techniques.They are indispensable devices in designing modern circuits and systems.This paper presents two practical circuits designed with programmable devices and its design method.By introducing programmable devices into gas sensor circuits,we can further improve system reliability,stability,sensitivity and integration degree,and enhance flexibility of system design.

Room-Temperature Gas Sensors Under Photoactivation:From Metal Oxides to 2D Materials

Room-temperature gas sensors have aroused great attention in current gas sensor technology because of deemed demand of cheap,low power consumption and portable sensors for rapidly growing Internet of things applications.As an important approach,light illumination has been exploited for room-temperature operation with improving gas sensor's attributes including sensitivity,speed and selectivity.This review provides an overview of the utilization of photoactivated nanomaterials in gas sensing field.First,recent advances in gas sensing of some exciting different nanostructures and hybrids of metal oxide semiconductors under light illumination are highlighted.Later,excellent gas sensing performance of emerging two-dimensional materialsbased sensors under light illumination is discussed in details with proposed gas sensing mechanism.Originated impressive features from the interaction of photons with sensing materials are elucidated in the context of modulating sensing characteristics.Finally,the review concludes with key and constructive insights into current and future perspectives in the light-activated nanomaterials for optoelectronic gas sensor applications.

Strategy and Future Prospects to Develop Room-Temperature-Recoverable NO2 Gas Sensor Based on Two-Dimensional Molybdenum Disulfide

Nitrogen dioxide(NO2),a hazardous gas with acidic nature,is continuously being liberated in the atmosphere due to human activity.The NO2 sensors based on traditional materials have limitations of high-temperature requirements,slow recovery,and performance degradation under harsh environmental conditions.These limitations of traditional materials are forcing the scientific community to discover future alternative NO2 sensitive materials.Molybdenum disulfide(MoS2)has emerged as a potential candidate for developing next-generation NO2 gas sensors.MoS2 has a large surface area for NO2 molecules adsorption with controllable morphologies,facile integration with other materials and compatibility with internet of things(IoT)devices.The aim of this review is to provide a detailed overview of the fabrication of MoS2 chemiresistance sensors in terms of devices(resistor and transistor),layer thickness,morphology control,defect tailoring,heterostructure,metal nanoparticle doping,and through light illumination.Moreover,the experimental and theoretical aspects used in designing MoS2-based NO2 sensors are also discussed extensively.Finally,the review concludes the challenges and future perspectives to further enhance the gas-sensing performance of MoS2.Understanding and addressing these issues are expected to yield the development of highly reliable and industry standard chemiresistance NO2 gas sensors for environmental monitoring.

On-chip readout plasmonic mid-IR gas sensor

Gas identification and concentration measurements are important for both understanding and monitoring a variety of phenomena from industrial processes to environmental change.Here a novel mid-IR plasmonic gas sensor with on-chip direct readout is proposed based on unity integration of narrowband spectral response,localized field enhancement and thermal detection.A systematic investigation consisting of both optical and thermal simulations for gas sensing is presented for the first time in three sensing modes including refractive index sensing,absorption sensing and spectroscopy,respectively.It is found that a detection limit less than 100 ppm for CO2 could be realized by a combination of surface plasmon resonance enhancement and metal-organic framework gas enrichment with an enhancement factor over 8000 in an ultracompact optical interaction length of only several microns.Moreover,on-chip spectroscopy is demonstrated with the compressive sensing algorithm via a narrowband plasmonic sensor array.An array of 80 such sensors with an average resonance linewidth of 10 nm reconstructs the CO2 molecular absorption spectrum with the estimated resolution of approximately 0.01 nm far beyond the state-of-the-art spectrometer.The novel device design and analytical method are expected to provide a promising technique for extensive applications of distributed or portable mid-IR gas sensor.

A Novel Artificial Neuron-Like Gas Sensor Constructed from CuS Quantum Dots/Bi2S3 Nanosheets

Real-time rapid detection of toxic gases at room temperature is particularly important for public health and environmental monitoring.Gas sensors based on conventional bulk materials often suffer from their poor surface-sensitive sites,leading to a very low gas adsorption ability.Moreover,the charge transportation efficiency is usually inhibited by the low defect density of surface-sensitive area than that in the interior.In this work,a gas sensing structure model based on CuS quantum dots/Bi_(2)S_(3) nanosheets(CuS QDs/Bi_(2)S_(3) NSs)inspired by artificial neuron network is constructed.Simulation analysis by density functional calculation revealed that CuS QDs and Bi_(2)S_(3) NSs can be used as the main adsorption sites and charge transport pathways,respectively.Thus,the high-sensitivity sensing of NO_(2) can be realized by designing the artificial neuron-like sensor.The experimental results showed that the CuS QDs with a size of about 8 nm are highly adsorbable,which can enhance the NO_(2) sensitivity due to the rich sensitive sites and quantum size effect.The Bi_(2)S_(3) NSs can be used as a charge transfer network channel to achieve efficient charge collection and transmission.The neuron-like sensor that simulates biological smell shows a significantly enhanced response value(3.4),excellent responsiveness(18 s)and recovery rate(338 s),low theoretical detection limit of 78 ppb,and excellent selectivity for NO_(2).Furthermore,the developed wearable device can also realize the visual detection of NO2 through real-time signal changes.

Berlin Green Framework‑Based Gas Sensor for Room‑Temperature and High‑Selectivity Detection of Ammonia

Ammonia detection possesses great potential in atmosphere environmental protection,agriculture,industry,and rapid medical diagnosis.However,it still remains a great challenge to balance the sensitivity,selectivity,working temperature,and response/recovery speed.In this work,Berlin green(BG)framework is demonstrated as a highly promising sensing material for ammonia detection by both density functional theory simulation and experimental gas sensing investigation.Vacancy in BG framework offers abundant active sites for ammonia absorption,and the absorbed ammonia transfers sufficient electron to BG,arousing remarkable enhancement of resistance.Pristine BG framework shows remarkable response to ammonia at 50–110°C with the highest response at 80°C,which is jointly influenced by ammonia’s absorption onto BG surface and insertion into BG lattice.The sensing performance of BG can hardly be achieved at room temperature due to its high resistance.Introduction of conductive Ti3CN MXene overcomes the high resistance of pure BG framework,and the simply prepared BG/Ti3CN mixture shows high selectivity to ammonia at room temperature with satisfying response/recovery speed.

Recent Progress on Flexible Room-Temperature Gas Sensors Based on Metal Oxide Semiconductor

With the rapid development of the Internet of Things,there is a great demand for portable gas sensors.Metal oxide semiconductors(MOS)are one of the most traditional and well-studied gas sensing materials and have been widely used to prepare various commercial gas sensors.However,it is limited by high operating temperature.The current research works are directed towards fabricating high-performance flexible room-temperature(FRT)gas sensors,which are effective in simplifying the structure of MOS-based sensors,reducing power consumption,and expanding the application of portable devices.This article presents the recent research progress of MOS-based FRT gas sensors in terms of sensing mechanism,performance,flexibility characteristics,and applications.This review comprehensively summarizes and discusses five types of MOS-based FRT gas sensors,including pristine MOS,noble metal nanoparticles modified MOS,organic polymers modified MOS,carbon-based materials(carbon nanotubes and graphene derivatives)modified MOS,and two-dimensional transition metal dichalcogenides materials modified MOS.The effect of light-illuminated to improve gas sensing performance is further discussed.Furthermore,the applications and future perspectives of FRT gas sensors are also discussed.

Enhancement of H_2 Sensing Properties of In_2O_3-based Gas Sensor by Chemical Modification with SiO_2

The sensitivity and selectivity to H_2 of a new In_2O_3-based gas sensor were improvedsignificantly by surface chemical modification. A dense layer of SiO_2 near the surface of the porousIn_2O_3 bead was formed by chemical vapor deposition(CVD)of diethoxydimethysilane(DEMS).The dense layer functioned as a molecular sieve, thereby the diffusion of gases with large moleculardiameters,except for H_2, was effectively controlled, resulting in a prominent selectivity and highsensitivity for H_2. The working mechanism of the sensor was also presented.

The light-enhanced NO_2 sensing properties of porous silicon gas sensors at room temperature

The NO2 gas sensing behavior of porous silicon（PS） is studied at room temperature with and without ultraviolet（UV） light radiation.The PS layer is fabricated by electrochemical etching in an HF-based solution on a p ＋-type silicon substrate.Then,Pt electrodes are deposited on the surface of the PS to obtain the PS gas sensor.The NO2 sensing properties of the PS with different porosities are investigated under UV light radiation at room temperature.The measurement results show that the PS gas sensor has a much higher response sensitivity and faster response-recovery characteristics than NO2 under the illumination.The sensitivity of the PS sample with the largest porosity to 1 ppm NO2 is 9.9 with UV light radiation,while it is 2.4 without UV light radiation.We find that the ability to absorb UV light is enhanced with the increase in porosity.The PS sample with the highest porosity has a larger change than the other samples.Therefore,the effect of UV radiation on the NO2 sensing properties of PS is closely related to the porosity.

Gas sensors based on TiO_(2) nanostructured materials for the detection of hazardous gases: A review

Hazardous gases have been strongly associated with being a detriment to human life within the environment The development of a reliable gas sensor with high response and selectivity is of great signifcance for detecting different hazardous gases.TiO_(2) nanomaterials are promising candidates with great potential and excellent per-formance in gas sensor applications,such as hydrogen,acetone,ammonia,and ethanol detection.This review begins with a detailed discussion of the di ferent dimensional morphologies of TiO_(2),whitch affect the gas sensing performance of TiO_(2) sensors.The diverse morphologies of TiO_(2) can easily be tuned by regulating the manufacturing conditions.Meanwhile,they exhibit unique characteristics for detecting gases,including large specific suface area,superior elecron tr ansport rates,extraordinary pemmeability,and active reaction sites,which offer new opportunities to improve the gas sensing properties.In addition,a variety of efforts have been made to functional TiO_(2) nanomaterials to further enhance sensing properties,including TiO_(2)-based composites and light-assisted gas sensors.The enhanced gas sensing mechanisms of multi-component composite nano-materials based on TiO_(2) include loaded noble metals,doped elements,constructed heterojunctions,and com-pounded with other functional materials.Finally,several studies have been summarized to demonstate the compar ative sensing properties of TiO_(2)-based gas sensors.

Hydrogen and Ozone SAW Based Gas Sensors with RF Magnetron Sputtered InO_x and Electron Beam Evaporated SiN_y

Layered Surface Acoustic Wave (SAW) devices with an InO_x/SiN_u/36°YX LiTaO_3 structure were investigated for sensing low concentrations of hydrogen (H_2) and ozone (O_3) at different operating temperatures.The sensor consists of a 1μm thick silicon nitride (SiN_y) intermediate layer deposited by electron beam evaporation on a 36°Y-cut X-propagating piezoelectric lithium tantalate (LiTaO_3) substrate and a 100 nm thin indium oxide (InO_x) sensing layer deposited by R.F.magnetron sputtering.The device fabrication is described and the performance of the sensor is analyzed in terms of response magnitude as a function of operating temperature.Large frequency shifts of 360 kHz for 600μg/g of H_2 and 92 kHz for 40 ng/g O_3 were recorded.In addition,the surface morphology of the deposited films were investigated by Atomic Force Microscopy (AFM) and the chemical composition by X-Ray Photoelectron Spectroscopy (XPS) to correlate gas-sensing behavior to structural characteristics of the thin film.

Room temperature non-balanced electric bridge ethanol gas sensor based on a single ZnO microwire

In this paper,ultra-long and large-scaled ZnO microwire arrays are grown by the chemical vapor deposition method,and a single ZnO microwire-based non-balanced electric bridge ethanol gas sensor is fabricated.The experimental results show that the gas sensor has good repeatability,high response rate,short response,and recovery time at room temperature(25℃).The response rate of the gas sensor exposed to 90-ppm ethanol is about 93%,with a response time and recovery time are 0.3 s and 0.7 s respectively.As a contrast,the traditional resistive gas sensor of a single ZnO microwire shows very small gas response rate.Therefore,ethanol gas sensor based on non-balanced electric bridge can obviously enhance gas sensing characteristics,which provides a feasible method of developing the high performance ZnO-based gas sensor.

Performance of Pt-TiO_2 Electrocatalyst for CO Oxidation in the Electrochemical Gas Sensor

It is reported for the first time that the Pt/TiO2 electrocatalyst was successfully used for the electrocatalytic oxidation of CO in the electrochemical gas sensor with a controlled potential mode. The stability of electrocatalytic activity of the Pt-TiO2 electrocatalyst for the CO oxidation is better than that of Pt.

Study on Temperature Modulation Techniques for Micro Gas Sensors

The sensitivity and selectivity of gas sensors are related with not only sensing material,but also their operating temperatures.Applying this property,temperature modulation technique has been proposed to improve the selectivity of gas sensors.With a newly developed alumina based micro gas sensor,the sensitivity to CO and CH_4 at different operating temperatures was investigated.By modulating the temperature of the sensor at pulse and sine wave modes with different frequencies and amplitudes,the dynamic responses of the sensor were measured and processed.Results show that the modulating waveshape plays an important role in the improvement of selectivity,while the influence of frequency is small at the suitable sampling frequency in the range of 25 mHz～200 mHz.

SnO_(2)nanostructured materials used as gas sensors for the detection of hazardous and flammable gases:A review

SnO_(2)has been extensively used in the detection of various gases.As a gas sensing material,SnO_(2)has excellent physical-chemical properties,high reliability,and short adsorption-desorption time.The application of the traditional SnO_(2)gas sensor is limited due to its higher work-temperature,low gas response,and poor selectivity.Nanomaterials can significantly impact gas-sensitive properties due to the quantum size,surface,and small size effects of nanomaterials.By applying nanotechnology to the preparation of SnO_(2),the SnO_(2)nanomaterial-based sensors could show better performance,which greatly expands the application of SnO_(2)gas sensors.In this review,the preparation method of the SnO_(2)nanostructure,the types of gas detected,and the improvements of SnO_(2)gas-sensing performances via elemental modification are introduced as well as the future development of SnO_(2)is discussed.

SnO_(2)/Co_(3)O_(4)nanofibers using double jets electrospinning as low operating temperature gas sensor

SnO_(2)/Co_(3)O_(4)nanofibers(NFs)are synthesized by using a homopolar electrospinning system with double jets of positive polarity electric fields.The morphology and structure of SnO_(2)/Co_(3)O_(4)hetero-nanofibers are characterized by using field emission scanning electron microscope(FE-SEM),transmission electron microscope(TEM),x-ray diffraction(XRD),and x-ray photoelectron spectrometer(XPS).The analyses of SnO_(2)/Co_(3)O_(4)NFs by EDS and HRTEM show that the cobalt and tin exist on one nanofiber,which is related to the homopolar electrospinning and the crystallization during sintering.As a typical n-type semiconductor,Sn O_(2)has the disadvantages of high optimal operating temperature and poor reproducibility.Comparing with Sn O_(2),the optimal operating temperature of SnO_(2)/Co_(3)O_(4)NFs is reduced from 350℃to 250℃,which may be related to the catalysis of Co_(2)O_(2).The response of SnO_(2)/Co_(3)O_(4)to 100-ppm ethanol at 250℃is 50.9,9 times higher than that of pure Sn O_(2),which may be attributed to the p–n heterojunction between the n-type Sn O_(2)crystalline grain and the p-type Co_(2)O_(2)crystalline grain.The nanoscale p–n heterojunction promotes the electron migration and forms an interface barrier.The synergy effects between Sn O_(2)and Co_(2)O_(2),the crystalline grain p–n heterojunction,the existence of nanofibers and the large specific surface area all jointly contribute to the improved gas sensing performance.