In this study,structural theory was used to examine the geometric configuration of channels embedded inside an object in the presence of internal heat generation for cooling by a heat transfer mechanism.The growth and...In this study,structural theory was used to examine the geometric configuration of channels embedded inside an object in the presence of internal heat generation for cooling by a heat transfer mechanism.The growth and development of gas transmission lines and the lack of up-to-date integrated information systems have made the design and maintenance of pipelines,as well as the handling of problems caused by various accidents in the pipeline,very complex in many cases.Using accurate descriptive and spatial information in tolls on gas transmission line maps such as pipes,booster stations,valves,and forks in a spatial reference database can engage planners,operators,and paramedics in a variety of management.They are used to help in the direction of optimal and purposeful management.Therefore,in this paper,by considering appropriate laboratory conditions and numerical experiments and calculations,it is possible to determine the optimal attraction of duct holes for cooling components of the gas transmission system,so that the industry can produce and developed gas transmission without incident.In this study,in addition to studying the geometric characteristics of channel spacing and their length,the dimensions of a specific channel for reducing the maximum produced temperature are also discussed.展开更多
The transmission capacity of gas pipeline networks should be calculated and allocated to deal with the capacity booking with shippers. Technical capacities, which depend on the gas flow distribution at routes or inter...The transmission capacity of gas pipeline networks should be calculated and allocated to deal with the capacity booking with shippers. Technical capacities, which depend on the gas flow distribution at routes or interchange points, are calculated with a multiobjective optimization model and form a Pareto solution set in the entry/exit or point-to-point regime. Then, the commercial capacities, which can be directly applied in capacity booking, are calculated with single-objective optimization models that are transformed from the above multiobjective model based on three allocation rules and the demand of shippers.Next, peak-shaving capacities, which are daily oversupply or overdelivery amounts at inlets or deliveries,are calculated with two-stage transient optimization models. Considering the hydraulic process of a pipeline network and operating schemes of compressor stations, all the above models are mixed-integer nonlinear programming problems. Finally, a case study is made to demonstrate the ability of the models.展开更多
Simulation has proven to be an effective tool for analyzing pipeline network systems （PNS） in order to determine the design and operational variables which are essential for evaluating the performance of the system....Simulation has proven to be an effective tool for analyzing pipeline network systems （PNS） in order to determine the design and operational variables which are essential for evaluating the performance of the system. This paper discusses the use of simulation for performance analysis of transmission PNS. A simulation model was developed for determining flow and pressure variables for different configuration of PNS. The mathematical formulation for the simulation model was derived based on the principles of energy conservation, mass balance, and compressor characteristics. For the determination of the pressure and flow variables, solution procedure was developed based on iterative Newton Raphson scheme and implemented using visual C＋＋6. Evaluations of the simulation model with the existing pipeline network system showed that the model enabled to determine the operational variables with less than ten iterations. The performances of the compressor working in the pipeline network system xvhich includes energy consumption, compression ratio and discharge pressure were evaluated to meet pressure requirements ranging from 4000-5000 kPa at various speed. Results of the analyses from the simulation indicated that the model could be used for performance analysis to assist decisions regarding the design and optimal operations of transmission PNS.展开更多
In the research, problems and damages of soil erosions in West -East Natural Gas Transmission were analyzed; the reasons were summarized and the characteristics of soil erosion were researched in order to explore prin...In the research, problems and damages of soil erosions in West -East Natural Gas Transmission were analyzed; the reasons were summarized and the characteristics of soil erosion were researched in order to explore principles of pipeline prevention and seek countermeasures.展开更多
In order to improve the safety management of urban gas transmission and distribution system, failure mode and effects analysis （FMEA） was used to construct the reliability analysis system of the pipeline network. To...In order to improve the safety management of urban gas transmission and distribution system, failure mode and effects analysis （FMEA） was used to construct the reliability analysis system of the pipeline network. To solve the problem of subjectivity and uncertainty of the multi-expert decision making, the correlation operator was introduced into the calculation of the risk priority number （RPN）. Using FMEA along with weight analysis and expert investigation approach, the FMEA evaluation table was given, including five failure modes, risk priority numbers, failure causes and effects, as well as corrective actions. The results show that correlation operator can directly process the linguistic terms and quantify the priority of the risks.展开更多
With the increase in energy demand, the demand for oil and gas transmission pipes, particularly high-grade longitudinal submerged arc welded pipes （LSAWs）, have been growing in recent years. The construction of the ...With the increase in energy demand, the demand for oil and gas transmission pipes, particularly high-grade longitudinal submerged arc welded pipes （LSAWs）, have been growing in recent years. The construction of the 2nd West -East natural gas transmission pipeline project shows that the oil and gas pipeline construction has entered a new phase of development with X80 pipes being applied in large scales for the first time in China. This paper briefly introduces the 2nd West-East natural gas transmission pipeline project and its main technical requirements with the focus on the features of API standard 5L X80 grade Ф 1219 mm series of U-ing-O-ing-Expanding （ UOE ） LSAW pipes, which Baosteel developed with the integrated technology for the 2nd West-East natural gas transmission pipeline project. The analysis shows the extra-low carbon content, the high contents of manganese and niobium, the fine microstructure, the high strength,the toughness and the good weldability of X80 pipes meet the requirements of ＂the technical specification of LSAW linepipes for the 2nd West-East natural gas transmission pipeline project in China＂. By the end of June 2010, Baosteel had totally produced 322000 t of Ф 1219 mm X80 UOE steel pipes, which have been successfully used in the 2nd West-East natural gas transmission pipeline project, thus filling the gap of the production of large diameter X80 UOE LSAW pipes in China.展开更多
基金The article was prepared as part of the state task“Research and development of complex energy-saving and thermoelectric regenerative systems”Application No.2019–1497,Subject No.FZWG-2020-0034.
文摘In this study,structural theory was used to examine the geometric configuration of channels embedded inside an object in the presence of internal heat generation for cooling by a heat transfer mechanism.The growth and development of gas transmission lines and the lack of up-to-date integrated information systems have made the design and maintenance of pipelines,as well as the handling of problems caused by various accidents in the pipeline,very complex in many cases.Using accurate descriptive and spatial information in tolls on gas transmission line maps such as pipes,booster stations,valves,and forks in a spatial reference database can engage planners,operators,and paramedics in a variety of management.They are used to help in the direction of optimal and purposeful management.Therefore,in this paper,by considering appropriate laboratory conditions and numerical experiments and calculations,it is possible to determine the optimal attraction of duct holes for cooling components of the gas transmission system,so that the industry can produce and developed gas transmission without incident.In this study,in addition to studying the geometric characteristics of channel spacing and their length,the dimensions of a specific channel for reducing the maximum produced temperature are also discussed.
文摘The transmission capacity of gas pipeline networks should be calculated and allocated to deal with the capacity booking with shippers. Technical capacities, which depend on the gas flow distribution at routes or interchange points, are calculated with a multiobjective optimization model and form a Pareto solution set in the entry/exit or point-to-point regime. Then, the commercial capacities, which can be directly applied in capacity booking, are calculated with single-objective optimization models that are transformed from the above multiobjective model based on three allocation rules and the demand of shippers.Next, peak-shaving capacities, which are daily oversupply or overdelivery amounts at inlets or deliveries,are calculated with two-stage transient optimization models. Considering the hydraulic process of a pipeline network and operating schemes of compressor stations, all the above models are mixed-integer nonlinear programming problems. Finally, a case study is made to demonstrate the ability of the models.
文摘Simulation has proven to be an effective tool for analyzing pipeline network systems （PNS） in order to determine the design and operational variables which are essential for evaluating the performance of the system. This paper discusses the use of simulation for performance analysis of transmission PNS. A simulation model was developed for determining flow and pressure variables for different configuration of PNS. The mathematical formulation for the simulation model was derived based on the principles of energy conservation, mass balance, and compressor characteristics. For the determination of the pressure and flow variables, solution procedure was developed based on iterative Newton Raphson scheme and implemented using visual C＋＋6. Evaluations of the simulation model with the existing pipeline network system showed that the model enabled to determine the operational variables with less than ten iterations. The performances of the compressor working in the pipeline network system xvhich includes energy consumption, compression ratio and discharge pressure were evaluated to meet pressure requirements ranging from 4000-5000 kPa at various speed. Results of the analyses from the simulation indicated that the model could be used for performance analysis to assist decisions regarding the design and optimal operations of transmission PNS.
基金Supported by Scientific Research Program of Water Resources Department of the Xinjiang Uygur Autonomous Region (xjsl-2011-11)Young Core Project of Northwest A&F University (KZCXI-10-4-1)~~
文摘In the research, problems and damages of soil erosions in West -East Natural Gas Transmission were analyzed; the reasons were summarized and the characteristics of soil erosion were researched in order to explore principles of pipeline prevention and seek countermeasures.
文摘In order to improve the safety management of urban gas transmission and distribution system, failure mode and effects analysis （FMEA） was used to construct the reliability analysis system of the pipeline network. To solve the problem of subjectivity and uncertainty of the multi-expert decision making, the correlation operator was introduced into the calculation of the risk priority number （RPN）. Using FMEA along with weight analysis and expert investigation approach, the FMEA evaluation table was given, including five failure modes, risk priority numbers, failure causes and effects, as well as corrective actions. The results show that correlation operator can directly process the linguistic terms and quantify the priority of the risks.
文摘With the increase in energy demand, the demand for oil and gas transmission pipes, particularly high-grade longitudinal submerged arc welded pipes （LSAWs）, have been growing in recent years. The construction of the 2nd West -East natural gas transmission pipeline project shows that the oil and gas pipeline construction has entered a new phase of development with X80 pipes being applied in large scales for the first time in China. This paper briefly introduces the 2nd West-East natural gas transmission pipeline project and its main technical requirements with the focus on the features of API standard 5L X80 grade Ф 1219 mm series of U-ing-O-ing-Expanding （ UOE ） LSAW pipes, which Baosteel developed with the integrated technology for the 2nd West-East natural gas transmission pipeline project. The analysis shows the extra-low carbon content, the high contents of manganese and niobium, the fine microstructure, the high strength,the toughness and the good weldability of X80 pipes meet the requirements of ＂the technical specification of LSAW linepipes for the 2nd West-East natural gas transmission pipeline project in China＂. By the end of June 2010, Baosteel had totally produced 322000 t of Ф 1219 mm X80 UOE steel pipes, which have been successfully used in the 2nd West-East natural gas transmission pipeline project, thus filling the gap of the production of large diameter X80 UOE LSAW pipes in China.
