High Ion-Selectivity of Garnet Solid Electrolyte Enabling Separation of Metallic Lithium

Ionic selectivity is of significant importance in both fundamental science and practical applications.For instance,an ion-selective material allows the passage of a particular kind of ions while blocking the others,which could be used for purification of materials.Herein,the Li-ion-selectivity of a garnet-type solid electrolyte is discussed by comparing the difference of activation energy between different ions migrating in solids.The high ion-selectivity is confirmed by harvesting high-purity metallic lithium(99.98 wt%)from low-lithium-purity sources(80 wt%)at a moderate temperature(190℃).This gives it huge potential in separating lithium with impurities especially alkali and alkali-earth elements.The cost of metallic lithium production is only 25%of the international lithium price.The proposed electrochemical metallic lithium separating method is advantageous compared with the traditional process in terms of efficiency,safety,and cost.

On the feasibility of variable separation method based on Hamiltonian system for plane magnetoelectroelastic solids

The eigenvalue problem of an infinite-dimensional Hamiltonian operator appearing in the isotropic plane magnetoelectroelastic solids is studied. First, all the eigenvalues and their eigenfunctions in a rectangular domain are solved directly. Then the completeness of the eigenfunction system is proved, which offers a theoretic guarantee of the feasibility of variable separation method based on a Hamiltonian system for isotropic plane magnetoelectroelastic solids. Finally, the general solution for the equation in the rectangular domain is obtained by using the symplectic Fourier expansion method.

Separation of primary solid phases from Al-Si alloy melts

The iron-rich solids formed during solidification of Al-Si alloys which are known to be detrimental to the mechanical,physical and chemical properties of the alloys should be removed.On the other hand,Al-Si hypereutectic alloys are used to extract the pure primary silicon which is suitable for photovoltaic cells in the solvent refining process.One of the important issues in iron removal and in solvent refining is the effective separation of the crystallized solids from the Al-Si alloy melts.This paper describes the separation methods of the primary solids from Al-Si alloy melts such as sedimentation,draining,filtration,electromagnetic separation and centrifugal separation,focused on the iron removal and on the separation of silicon in the solvent refining process.

CFD studies on the separation performance of a new combined gas–solid separator used in TMSR-SF

In order to comply with discharge standards, a gas–solid separator is used to remove solid particles from the thorium molten salt reactor-solid fuel (TMSR-SF) system. As a key component, it directly determines system energy efficiency. However, current gas–solid separators, based on activated carbon adsorption technology, result in high pressure drops and increased maintenance costs. In the present study, a new combined gas–solid separator was developed for the TMSR-SF. Based on a simplified computational fluid dynamics (CFD) model, the gas–solid twophase flow and the motion trajectory of solid particles were simulated for this new separator using commercial ANSYS 16.0 software. The flow and separation mechanism for this structure were also been discussed in terms of their velocity effects and pressure field distributions, and then the structure was optimized based on the influence of key structural parameters on pressure and separation efficiency. The results showed that the standard k–ε model could be achieved and accurately simulated the new combined separator. In this new combined gas–solid separator, coarse particles are separated in the first stage using rotating centrifugal motion, and then fine particles are filtered in the second stage, giving a separation efficiency of up to 96.11%. The optimum blade inclination angle and numbers were calculated to be 45° and four, respectively. It implicated that the combined separator could be of great significance in a wide variety of applications.

CFD-DEM simulation of fluid-solid flow of a tapered column separation bed

Research on recycling waste Printed Circuit Boards(PCB) is at the forefront of preventing environmental pollution and finding ways to recycle resources.The Tapered Column Separation Bed(TCSB) is invented aiming at disposing the problem that fine particles of waste printed circuit boards cannot be separated efficiently so as to obtain further insight about the underlying mechanisms and demonstrate the separation feasibility in the tapered column separation bed.In this work,a Computational Fluid Dynamics(CFD) coupled with Discrete Element Method(DEM) model for two-phase flow has been extended to simulate the fluid-solid flow in the tapered column separation bed.Its validity is demonstrated by its successful capturing the key features of particles' flow pattern,velocity,the pressure distribution,the axial position with time and axial force for particles with different densities.Simulation results show that the plastic particles and resin particles become overflow,while copper particles,iron particles and aluminum particles successively become underflow,with a discharge water flow rate of 1 m^3/h,an obliquity of 30°.The simulated results agree reasonably well with the experimental observation.Using this equipment to separate waste PCBs is feasible,theoretically.

Solid- liquid phase separation and resource recycling study for waste rolling oily sludge

On the basis of the characteristics of a highly emulsified solid-liquid phase （fine particles, sticky consistency,black color, and low reuse ratio）, waste rolling oily sludge has been a focal problem in the steel industry. In this article, a solid-liquid phase separation and resource recycling process was described, with pilot test results showing that flocculation-sedimentation is an effective pretreatment, and that the filtration-coagulationvacuum distillation process is simple and feasible with a 53.5% recovery rate for regenerated oil that is qualified for return to the roiling production line. Then,solid phase oil-sludge was extracted by solvents with a 77% metal resource recovery rate and a wide utilization range. Finally, according to the experimental results, a set of feasibility plans for a 50 t/a waste rolling oily sludge solid-liquid separation and resource recycle project was designed, with the expectation of 50% regenerated oil yield, 70% solid metal resource recovery, and a 2. 5-year investment payback period.

Octa-<i>O</i>-Methoxy Resorcin [4] Arene Amberlite XAD-4 Polymeric Chelating Resin for Solid Phase Extraction, Preconcentration, Separation and Trace Determination of Ni(II), Cu(II), Zn(II) and Cd(II) Ions

Synthetic resin, Amberlite XAD-4 was linked covalently with the third generation supramolecule, octa-O-methoxy resorcin [4] arene through -N=N-group to form chelating resin, which has been characterized and effectively used for the separation and preconcentration of metal ions such as Ni(II), Cu(II), Zn(II) and Cd(II). Critical parameters such as pH, flow rate, sorption capacity, breakthrough studies, distribution coefficient, preconcentration factor, concentration of eluting agents responsible for quantitative extraction of metal ions were optimized. The synthesized resin showed good binding affinity towards Ni(II), Cu(II), Zn(II) and Cd(II) under selective pH conditions. Good breakthrough capacity and fast exchange kinetics of the resin lead to effective separation of metal ions from their binary and ternary mixture by column method on the basis of pH and eluting agents. The resin could be reused for about 8 -10 cycles. The proposed method having the analytical data with the relative standard deviation (RSD) 2% and with recoveries of analytes higher than 98%, reflects upon the reproducibility and reliability of the method which has been successfully applied in the separation and determination of Ni(II), Cu(II), Zn(II) and Cd(II) ions in synthetic, natural and ground water samples.

Structural Optimization of a Novel Up-run Gas-solid Separator

A new gas-solid separator dedicated to heavy-oil fast pyrolysis process incorporating inertial and centrifugal separation was designed.Gas and typical fluid catalytic cracking(FCC) catalyst particles(with a density of 1500 kg/m3,and a mean diameter of 45.81 μm) were used in the study.The inlet gas velocity was kept constant at 13.36 m/s,while the solid loading at the inlet ranged from 0 to 700 g/m3.When the exhaust pipe opening was provided with two narrow-width slots near the inlet without baffles,the solid collection efficiency increased with an increasing solid loading at the inlet and was close to 95% along with a decreasing pressure drop.After increasing the secondary separation structure,the separation efficiency greatly improved.By adjusting the diameter of the secondary exhaust pipe,the separation efficiency and pressure drop could be balanced.Under the experimental conditions,when the diameter of the second exhaust pipe was equal to d=100 mm,the pressure drop was lower than 1400 Pa while the separation efficiency could exceed 99.50%;and when the diameter was equal to d=120 mm,the pressure drop was less than 700 Pa,with the separation efficiency reaching over 99.00%.

Forming solid electrolyte interphase in situ in an ionic conducting Li_(1.5)Al_(0.5)Ge_(1.5)(PO_4)_3-polypropylene(PP) based separator for Li-ion batteries

A new concept of forming solid electrolyte interphases（SEI） in situ in an ionic conducting Li（1.5）Al（0.5）Ge（1.5）（PO4）3-polypropylene（LAGP-PP） based separator during charging and discharging is proposed and demonstrated. This unique structure shows a high ionic conductivity, low interface resistance with electrode, and can suppress the growth of lithium dendrite. The features of forming the SEI in situ are investigated by scanning electron microscopy（SEM） and x-ray photoelectron spectroscopy（XPS）. The results confirm that SEI films mainly consist of lithium fluoride and carbonates with various alkyl contents. The cell assembled by using the LAGP-coated separator demonstrates a good cycling performance even at high charging rates, and the lithium dendrites were not observed on the lithium metal electrode. Therefore, the SEI-LAGP-PP separator can be used as a promising flexible solid electrolyte for solid state lithium batteries.

Suppressing transition metal dissolution and deposition in lithium-ion batteries using oxide solid electrolyte coated polymer separator

The dissolution of transition metal(TM)cations from oxide cathodes and the subsequent migration and deposition on the anode lead to the deconstruction of cathode materials and uncontrollable growth of solid electrode interphase(SEI).The above issues have been considered as main causes for the performance degradation of lithium-ion batteries(LIBs).In this work,we reported that the solid oxide electrolyte Li1.5Al0.5Ti1.5(PO4)3(LATP)coating on polyethylene(PE)polymer separator can largely block the TM dissolution and deposition in LIBs.Scanning electron microscopy(SEM),second ion mass spectroscopy(SIMS),and Raman spectroscopy characterizations reveal that the granular surface of the LATP coating layer is converted to a dense morphology due to the reduction of LATP at discharge process.The as-formed dense surface layer can effectively hinder the TM deposition on the anode electrode and inhibit the TM dissolution from the cathode electrode.As a result,both the LiCoO2/SiO-graphite and LiMn2O4/SiO-graphite cells using LATP coated PE separator show substantially enhanced cycle performances compared with those cells with Al2O3 coated PE separator.

Separation of Red (Y_2O_3:Eu^(3+)), Blue (BaMgAl_(10)O_(17):Eu^(2+)) and Green (CeMgAl_(10)O_(17):Tb^3) Rare Earth Phosphors by Liquid/Liquid Extraction

A novel process for separation of red （Y2O3：Eu^3＋）, blue（BaMgAl10O17：Eu^2＋） and green （CeMgAl10O17：Tb^3） rare earth fluorescent powders was proposed. At first, the blue powder can be extracted selectively from an aqueous solution using a chelating collector 2-thenoyltrifluoroacetone （TTA） dissolved in heptane at alkaline pH condition, then, chloroform was used for extracting the green powder into organic phase. The red phosphor remains in aqueous phase with potassium sodium tartrate depressant （PST）. Therefore, three phosphors can be separated successfully from their artificial mixtures by liquid/liquid extraction, and grades and recovery of separated products reach respectively as follows： red is 96.9% and 95.2%, blue is 82.7% and 98.8%, green is 94.6% and 82.6%.

Comparison of coal separation characteristics based on different separating approaches in dry coal beneficiation flowsheet

The separation characteristic of raw coal from Luoyang mining area, China, was investigated by applying a dry coal beneficiation flowsheet with the dense medium gas-solid fluidized bed as main separating equipment. The experimental and simulation results indicate that the dense medium gas-solid fluidized bed can provide uniform distribution and stable fluctuation of bed densities at various heights. Two types of different separating approaches were compared using the dry coal beneficiation flowsheet. Compared with obtaining cleaning coal in the first stage of the flowsheet, a higher yield of the cleaning coal and better separation efficiency can be achieved when discharging gangue in the first stage. Finally, the results indicate that 64.86% pure cleaning coal with an ash content of 11.77% and 13.53% middlings were obtained, and 21.61% gangue was removed in two successive separation stages with the probable errors of 0.05 and 0.07 g/cm3, respectively.

Separation and enrichment of trace ractopamine in biological samples by uniformly-sized molecularly imprinted polymers

In order to prepare a high capacity packing material for solid-phase extraction with specific recognition ability of trace ractopamine in biological samples, uniformly-sized, molecularly imprinted polymers （MIPs） were prepared by a multi-step swelling and polymerization method using methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linker, and toluene as a porogen respectively. Scanning electron microscope and specific surface area were employed to identify the characteristics of MIPs. Ultraviolet spectroscopy, Fourier transform infrared spectroscopy, Scatchard analysis and kinetic study were performed to interpret the specific recognition ability and the binding process of MIPs. The results showed that, compared with other reports, MIPs synthetized in this study showed high adsorption capacity besides specific recognition ability. The adsorption capacity of MIPs was 0.063 mmol/g at 1 mmol/L ractopamine concentra- tion with the distribution coefficient 1.70. The resulting MIPs could be used as solid-phase extraction materials for separation and enrichment of trace ractopamine in biological samples.

Solid Additive-Assisted Layer-by-Layer Processing for 19%Efficiency Binary Organic Solar Cells

Morphology is of great significance to the performance of organic solar cells(OSCs),since appropriate morphology could not only promote the exciton dissociation,but also reduce the charge recombination.In this work,we have developed a solid additive-assisted layer-by-layer(SAA-LBL)processing to fabricate high-efficiency OSCs.By adding the solid additive of fatty acid(FA)into polymer donor PM6 solution,controllable pre-phase separation forms between PM6 and FA.This intermixed morphology facilitates the diffusion of acceptor Y6 into the donor PM6 during the LBL processing,due to the good miscibility and fast-solvation of the FA with chloroform solution dripping.Interestingly,this results in the desired morphology with refined phase-separated domain and vertical phase-separation structure to better balance the charge transport/collection and exciton dissociation.Consequently,the binary single junction OSCs based on PM6:Y6 blend reach champion power conversion efficiency(PCE)of 18.16%with SAA-LBL processing,which can be generally applicable to diverse systems,e.g.,the PM6:L8-BO-based devices and thick-film devices.The efficacy of SAA-LBL is confirmed in binary OSCs based on PM6:L8-BO,where record PCEs of 19.02%and 16.44%are realized for devices with 100 and 250 nm active layers,respectively.The work provides a simple but effective way to control the morphology for high-efficiency OSCs and demonstrates the SAA-LBL processing a promising methodology for boosting the industrial manufacturing of OSCs.

Complex Processing of Pulverized Fly Ash by Dry Separation Methods

Pulverized fly ash (PFA) is produced about 500 billions tons every year in the world in a result of coals combustion. Most of the fly ash collected in power plants is disposed by deposition in landfills, situated as a rule near big cities with well developed infrastructure and high cost of land. Moreover, the pollution of environmental by fine solid wastes is inevitable and takes place in area of residing of a basic part of the population. The only solution is a complex processing of fine wastes with a production of value added materials. New conception of complex processing of PFA is proposed on the base of facilities of Electro-mass-classifier (EMC) and other techniques. The characterization of separated fractions was carried out by SEM and optic microscopy, XRD, laser diffraction, M?ssbauer spectroscopy and other methods. A fine fraction of glass microspheres presents the main interest as filler in various materials.

The Impact of Solid Waste Generation, Storage and Separation Practices among Households on the Environment in Freetown

As urbanization and population growth continue to increase in Freetown, due to changes in economic, social, environmental, political, and demographic factors, the municipal solid waste (MSW) generation also continues to increase, making its management difficult for the municipal authority. Efficient separation and storage of solid waste at the source of generation can boost resource and energy recovery from MSW. This study examines the municipal solid waste management (MSWM) process, focusing on generation, storage and separation practices among households and their impact on the environment in Freetown. It emphasizes the inclusion of MSWM programs in primary schools to raise public awareness, the implementation of effective waste management practices, and the enforcement of related policies to enhance the MSWM sector, contributing to sustainable MSWM in Freetown. By utilizing both qualitative and quantitative methods, 393 structured questionnaires were administered across three selected sections to collect data on household solid waste storage and separation practices. The analysis employed descriptive statistics, using Origin-Pro9 and MS Excel. The findings show that with a population of 1.53 million people in Freetown, the per capita solid waste generation is 0.58 kg per day. The findings also show that 97% of the households have storage facilities as a result of the increase in awareness and education about the proper storage of solid waste. However, 96% of respondents do not practice separation of solid waste at the source of generation, which has become a concern among researchers in Sierra Leone. Additionally, 88% of respondents are unaware of ISWM principles, with only 12% aware, most of whom have received some education on proper solid waste management. The study recommends improving MSWM in Freetown to protect public health and the environment.

螺杆泵转速对油水旋流分离管流场特性的影响

旋流分离器在井下采油螺杆泵作用下会发生复杂的振动现象,对旋流分离器内部流场造成一定影响。为研究螺杆泵不同转速下旋流分离器内部流场的变化规律,以同井注采工艺中螺杆泵作用下的旋流分离管柱为研究对象,针对振动壁面旋流分离管柱结构及工作特点,基于计算流体动力学方法、计算固体力学方法以及流固耦合理论,建立流固耦合力学模型;利用流固耦合分析方法,对双螺杆泵转动条件下井下旋流分离管柱内速度场、油相分布、涡量及湍动能等流场特性进行分析。分析结果表明:随着螺杆泵转速升高,分离器内切向速度和轴向速度强度逐渐减弱,径向速度的不对称性逐渐加剧,转速的周期性变化还会造成径向速度场分布的偏移;螺杆泵不同转速下旋流分离器内部涡量分布不同,随着转速升高,溢流管以及锥段部分附近相关流场的涡旋明显增强;旋流器溢流口附近油相体积分数会随着螺杆泵转速的升高而减小;不同螺杆泵转动状态下,大颗粒油滴的分布不同。所得结果可为螺杆泵井下旋流分离同井注采系统的设计及螺杆泵的转速设定提供参考。

随钻式含油钻屑无害化循环利用技术研究

废弃油基及合成基(气制油)钻井液钻屑资源回收价值高,再生循环利用技术处理含油钻屑,不仅具有经济价值,还具有明显的环境效益。针对含油岩屑特性,基于回收废水和回收基液性能、固体废渣检测和经济性评价,对撬装随钻式含油钻屑热降解循环利用装置进行评价。现场应用研究表明,使用撬装式多回程电磁加热解析技术处理含油钻屑,可以实现含油钻屑减量化、无害化和资源化,从而实现连续生产,解决了随钻含油钻屑处置及资源化利用技术难题。

油液多层过滤去固分离及特性分析

针对油-固体系中单层滤网无法同时满足过滤精度高与使用寿命长的问题,采用多层过滤器并对其去固分离特性展开分析。通过耦合流场控制方程、颗粒运动方程、颗粒-壁面碰撞模型方程,建立了适用油-固体系的多层过滤数值分析模型,探究了油-固体系中多层过滤器的去固分离特性,分析了入口流速和滤网层数对流场特性及过滤比(β)的影响。结果表明:多层过滤器可有效过滤孔径与粒径比(k_(d))大于15的固体颗粒;增加滤网层数,d_(5)和d_(20)(β分别为5和20时对应的颗粒粒径)显著降低;增大入口流速,d_(5)和d_(20)变化较小;当β<5时,颗粒粒径的变化对过滤比的影响较小;当β>5时,颗粒粒径的小幅增大可能导致过滤比显著提高。