Load-balancing data distribution in publish/subscribe mode

To improve data distribution efficiency a load-balancing data distribution LBDD method is proposed in publish/subscribe mode.In the LBDD method subscribers are involved in distribution tasks and data transfers while receiving data themselves.A dissemination tree is constructed among the subscribers based on MD5 where the publisher acts as the root. The proposed method provides bucket construction target selection and path updates furthermore the property of one-way dissemination is proven.That the average out-going degree of a node is 2 is guaranteed with the proposed LBDD.The experiments on data distribution delay data distribution rate and load distribution are conducted. Experimental results show that the LBDD method aids in shaping the task load between the publisher and subscribers and outperforms the point-to-point approach.

Statistical features of aftershock distribution size for moderate and large earthquakes in Chinese mainland

Based on data of earthquake sequences with Ms≥5.0 in Chinese mainland from 1970 to 2004, for different sequence types and different rupture modes of the main shock, the relationship between aftershock distribution size R and the magnitude of the main shock Mo has been studied statistically. Considering the rupture mode of the main shock, we give the quantitative statistical relationships between R and Mo under 95% confidence level for different sequence typos. Qualitatively, lgR, the logarithm of the aftershock distribution size, is positively correlative to the M0, but the data distribution is dispersed. Viewing from different sequence typos, the correlation between R and M0 is very weak for isolated earthquake type （lET） sequence, R distributes in the range from 5 to 60 km; For mainshock-aftershock type （MAT）, lgR is positively correlative to M0; For multiple main shock type （MMT）, the corelation between lgR and M0 is not very obvious when M0≤6.2 and R distributes in the range from 5 to 70 km, while it shows a linear correlation when M0≥6.3. The statistical results also show that the occupational ratios of different sequence types for strike-slip and oblique slip are almost the same. But for dip-slip （mostly are thrust mechanisms）, the ratio of MAT is higher than that of IET and MMT. Comparing with previous results, it indicates that, when M0 is large enough, R is mainly determined by M0 and there is almost no relationship with the rupture mode of the main shock.

Landslide distribution and sliding mode control along the Anninghe fault zone at the eastern edge of the Tibetan Plateau

Tibetan Plateau is known as the roof of the world.Due to the continuous uplift of the Tibetan Plateau,many active fault zones are present.These active fault zones such as the Anninghe fault zone have a significant influence on the formation of special geomorphology and the distribution of geological hazards at the eastern edge of the Tibetan Plateau.The Anninghe fault zone is a key part of the Y-shaped fault pattern in the Sichuan-Yunnan block of China.In this paper,high-resolution topographic data,multitemporal remote sensing images,numerical calculations,seismic records,and comprehensive field investigations were employed to study the landslide distribution along the active part of the Anninghe.The influence of active faults on the lithology,rock mass structures and slope stress fields were also studied.The results show that the faults within the Anninghe fault zone have damaged the structure and integrity of the slope rock mass,reduced the mechanical strength of the rock mass and controlled the slope failure modes.The faults have also controlled the stress field,the distribution of the plastic strain zone and the maximum shear strain zone of the slope,thus have promoted the formation and evolution of landslides.We find that the studied landslides are linearly distributed along the Anninghe fault zone,and more than 80%of these landslides are within 2–3 km of the fault rupture zone.Moreover,the Anninghe fault zone provides abundant substance for landslides or debris flows.This paper presents four types of sliding mode control of the Anninghe fault zone,e.g.,constituting the whole landslide body,controlling the lateral boundary of the landslide,controlling the crown of the landslide,and constituting the toe of the landslide.The results presented merit close attention as a valuable reference source for local infrastructure planning and engineering projects.

Coupling effects of morphology and inner pore distribution on the mechanical response of calcareous sand particles

Calcareous sand is typically known as a problematic marine sediment because of its diverse morphology and complex inner pore structure.However,the coupling effects of morphology and inner pores on the mechanical properties of calcareous sand particles have rarely been investigated and understood.In this study,apparent contours and internal pore distributions of calcareous sand particles were obtained by three-dimensional(3D)scanning imaging and X-ray micro-computed tomography(X-mCT),respectively.It was revealed that calcareous sand particles with different outer morphologies have different porosities and inner pore distributions because of their original sources and particle transport processes.In addition,a total of 120 photo-related compression tests and 4923D discrete element simulations of four specific shaped particles,i.e.bulky,angular,dendritic and flaky,with variations in the inner pore distribution were conducted.The macroscopic particle strength and Weibull modulus obtained from the physical tests are not positively correlated with the porosity or regularity in shape,indicating the existence of coupling effect of particle shape and pore distribution.The shape effect on the particle strength first increases with the porosity and then decreases.The particle crushing of relatively regular particles is governed by the porosity,but that of extremely irregular particles is governed by the particle shape.The particle strength increases with the uniformity of the pore distribution.Particle fragmentation is mainly dependant on tensile bond strength,and the degree of tensile failure is considerably impacted by the particle shape but limited by the pore distribution.

Control method based on DRFNN sliding mode for multifunctional flexible multistate switch

To address the low accuracy and stability when applying classical control theory in distribution networks with distributed generation,a control method involving flexible multistate switches(FMSs)is proposed in this study.This approach is based on an improved double-loop recursive fuzzy neural network(DRFNN)sliding mode,which is intended to stably achieve multiterminal power interaction and adaptive arc suppression for single-phase ground faults.First,an improved DRFNN sliding mode control(SMC)method is proposed to overcome the chattering and transient overshoot inherent in the classical SMC and reduce the reliance on a precise mathematical model of the control system.To improve the robustness of the system,an adaptive parameter-adjustment strategy for the DRFNN is designed,where its dynamic mapping capabilities are leveraged to improve the transient compensation control.Additionally,a quasi-continuous second-order sliding mode controller with a calculus-driven sliding mode surface is developed to improve the current monitoring accuracy and enhance the system stability.The stability of the proposed method and the convergence of the network parameters are verified using the Lyapunov theorem.A simulation model of the three-port FMS with its control system is constructed in MATLAB/Simulink.The simulation result confirms the feasibility and effectiveness of the proposed control strategy based on a comparative analysis.

Study on Decision Method of Neutral Point Grounding Mode for Medium-Voltage Distribution Network

The neutral grounding mode of medium-voltage distribution network decides the reliability, overvoltage, relay protection and electrical safety. Therefore, a comprehensive consideration of the reliability, safety and economy is particularly important for the decision of neutral grounding mode. This paper proposes a new decision method of neutral point grounding mode for mediumvoltage distribution network. The objective function is constructed for the decision according the life cycle cost. The reliability of the neutral point grounding mode is taken into account through treating the outage cost as an operating cost. The safety condition of the neutral point grounding mode is preserved as the constraint condition of decision models, so the decision method can generate the most economical and reliable scheme of neutral point grounding mode within a safe limit. The example is used to verify the feasibility and effectiveness of the decision method.

Distribution, modes of occurrence, and main factors influencing lead enrichment in Chinese coals

Lead is a potentially harmful element that has caused serious environmental pollution during its mining and use along with serious human health problems.This study assessed lead in Chinese coals based on published literature,with a particular focus on data reported since 2004.The analysis included 9447 individual samples from 103 coalfields or mines in 28 provinces in China.The arithmetic mean content of lead in the studied coals was 15.0μg/g.Considering the coal reserves,the weighted-average lead concentration in Chinese coals was calculated to be 19.6μg/g.Lead was significantly enriched in the coals from Henan Province and enriched in the coals from the Tibet Autonomous Region.The coals from Tibet–Western Yunnan and the southern areas of China had elevated lead concentrations.Sulfides are the primary hosts of lead in Chinese coals,although other hosts include silicates,organic matter,carbonates,and other minerals.Source rocks in the sediment-source region and marine environments may be the most significant factors contributing to lead enrichment in Chinese coals.Hydrothermal fluids and peat-forming plants also contribute to lead enrichment in some Chinese coals.

A Wind Power Prediction Framework for Distributed Power Grids

To reduce carbon emissions,clean energy is being integrated into the power system.Wind power is connected to the grid in a distributed form,but its high variability poses a challenge to grid stability.This article combines wind turbine monitoring data with numerical weather prediction(NWP)data to create a suitable wind power prediction framework for distributed grids.First,high-precision NWP of the turbine range is achieved using weather research and forecasting models(WRF),and Kriging interpolation locates predicted meteorological data at the turbine site.Then,a preliminary predicted power series is obtained based on the fan’s wind speed-power conversion curve,and historical power is reconstructed using variational mode decomposition(VMD)filtering to form input variables in chronological order.Finally,input variables of a single turbine enter the temporal convolutional network(TCN)to complete initial feature extraction,and then integrate the outputs of all TCN layers using Long Short Term Memory Networks(LSTM)to obtain power prediction sequences for all turbine positions.The proposed method was tested on a wind farm connected to a distributed power grid,and the results showed it to be superior to existing typical methods.

Dislocation distribution model of mode Ⅲ propagation crack

Dislocation distribution functions of the edges of mode Ⅲ propagation crack subjected to three types of loads were studied by the methods of the theory of complex variable functions,by which,the problems researched were facilely transformed into Riemann-Hilbert problems and Keldysh-Sedov mixed boundary value problems. Analytical solutions of stresses,displacement and dynamic stress intensity factor were obtained by the measures of the theory of self-similar functions and corresponding differential and integral operation. In terms of the relationship between dislocation distribution functions and displacements,analytical solutions of dislocation distribution functions were obttained,and variational rules of dislocation distribution functions were depicted.

Mode Selection Strategy of Dual Distribution Channel Based on Revenue Analysis

Within the scope of dual distribution channel(DDC)modes—ME&T-C and M-T&E-C,a game model designed for channel members was proposed.Based on this game model,the game equilibrium under both centralized and decentralized decisionmaking situations was analyzed,the channel members' and overall revenues of two modes under the same decision-making situation are compared,and the influence of demand shift coefficient to the overall and members' revenue was also studied through example analysis.Based on the comparison and analysis of the revenue yielded from the two DDC modes,it's discovered that within a certain hypothetical range,the M-T&E-C mode seems to be a better option for the manufacturer than the ME&T-C mode.Therefore,this discovery can be served as a theoretical reference for manufacturers when choosing the optimal DDC mode in real life.

Security of quantum key distribution using two-mode squeezed states against optimal beam splitter attack

For the beam splitter attack strategy against quantum key distribution using two-mode squeezed states, the analytical expression of the optimal beam splitter parameter is provided in this paper by applying the Shannon information theory. The theoretical secret information rate after error correction and privacy amplification is given in terms of the squeezed parameter and channel parameters. The results show that the two-mode squeezed state quantum key distribution is secure against an optimal beam splitter attack.

Research on Distribution Network Automation and Distribution Network Planning Mode

Based on the research of distribution network automation and distribution network planning mode, the analysis of the significance of urban distribution network automation must be performed at the first place. Combined with the problems existing in China’s current distribution network, it is concluded that, establish effective hardware support system, data sharing and feeder automation to ensure automation safety;strengthen power distribution and power line material testing to improve distribution automation system and distribution network planning;research methods of improving the professional skills and comprehensive quality of professionals.

Effect of proppant sizes and injection modes on proppant transportation and distribution in the tortuous fracture model

Particle-fluid transport and placement mechanism in tortuous fracture played a crucial role in uncon-ventional reservoirs.Currently,most studies focused on mono-size proppant with fluid transport pro-cesses in tortuous fractures.However,the mixture-size proppant with fluid movement mechanism in tortuous fracture was still uncommon.Therefore,this study designed and applied a series of experiments with a physical analog model of a tortuous fracture with 120°and 90°-angled bends and combined high-speed camera-based equipment.This experimental system was used to track different-mixture-sized proppant particle motion trajectories for a series of proppant injection schemes;The following conclu-sions were drawn from this study:1.The pile-up processes mechanism in all investigated schemes were similar and could be reduced to four main stages.2.The packing structure at both sides of the fracture wall had different variation rates,which were controlled by the mix ratio(change from 1∶1-1∶5)of proppant size.3.Some new packing patterns,such as Zebra Stripe,had occurred,controlled by the different proppant injection sequences.4.Small-sized mono-proppant(30/50 mesh)had the highest transport efficiency in the tortuous fracture,followed by the mixed-sized multi-proppant(10/20 mesh:30/50 mesh),large-sized proppant(10/20 mesh)was the worst.5.An optimized alternating in-jection mode was recommended as injecting small-sized proppant first(30/50 mesh)and followed by mixed-sized multi-proppant(10/20 mesh:30/50 mesh),which could contribute to obtaining the optimal both proppant packing height and travel distance in tortuous fracture.6.Two correlations were devel-oped for predicting the proppant packing height and transportation distance.

Mode switching torque distribution strategy of timely four-wheel driven high-gap plant protection machine

The high-gap plant protection machine is taken in this paper as the research object to ensure the good driving power and safety of the high-gap plant protection machine,and the control strategy of inter-shaft torque distribution is established under different working conditions to improve vehicle power and lateral stability.The anticipated demand torque is initially determined based on the structural characteristics and operational principles of the plant protection machine.Subsequently,a hierarchical control framework is devised by incorporating a formulated switching control strategy.Finally,a simulation model for torque distribution control strategy between shafts is developed on the Matlab/Simulink platform,followed by simulation and experimental verification.The results are presented as follows:the inter-shaft torque distribution strategy established in this paper increases the average longitudinal acceleration by 0.13 m/s^(2) and 0.14 m/s^(2) under the control of low and high to low adhesion road surfaces,respectively.Under the control of the single-line shifting condition,the yaw velocity can successfully follow the expected value with a maximum value of 0.61 rad/s.The side deflection angle of the center of mass does not exceed 2.8°,which can follow the ideal trajectory and improve power and safety.

The distribution and occurrence of mercury in Chinese coals

Mercury is one of the most concerned hazardous elements in coals. 1018 coal samples of different coal-forming periods, coal-accumulating areas and coal ranks all over the country were collected to study the distributions of mercury in Chinese coals. The modes of occurrence of mercury were studied with float-sink experiments of 10 coals from different basins in China and correlation analyses were conducted between concentrations of mercury and maceral and sulfur contents, as well as the ash yield. The theoretic concentrations and affinities of mercury in vitrinite, inertinite, clay and pyrite were then calculated following the methods proposed by Solari. The weighted average concentration of mercury in Chinese coals is 0.154 ~tg/g, which is similar to that in the word coals in general. The mercury concentrations vary largely in the coals of different coal-forming period and coal-accumulating areas as geological settings play key roles in deter- mining the geochemistry of mercury. The concentrations of mercury in coals from south and southwest China and those from North China of C3-P1 are relatively higher while those from North China of Jm-a and Northeast of J3-K1 relatively lower. The general distribution trends of mercury are very similar to that of ash yield, sulfur contents in coals. Pyrite is the dominant carrier of mercury in most coals, especially in some high-sulfur coals with abundant epigenetic pyrite formed during diagenesis and metamorphism. Mercury has higher affinity to vitrinite than to inertinite in most coals, which accords with the geological origin of macerals and geochemistry of mercury.

Chattering analysis for discrete sliding mode control ofdistributed control systems

The chattering characteristic of sliding mode control isanalyzed when it is applied in distributed control systems （DCSs）.For a DCS with random time delay and packet dropout, a discreteswitching system model with time varying sampling period isconstructed based on the time delay system method. The reachinglaw based sliding mode controller is applied in the proposedsystem. The exponential stability condition in the form of linearmatrix inequality is figured out based on the multi-Lyaponov functionmethod. Then, the chattering characteristic is analyzed for theswitching system, and a chattering region related with time varyingsampling period and external disturbance is proposed. Finally, numericalexamples are given to illustrate the validity of the analysisresult.

Finite element analysis of stress and strain distributions in mortise and loose tenon furniture joints

We studied the effect of loose tenon dimensions on stress and strain distributions in T-shaped mortise and loose tenon （M＆amp;LT） furni-ture joints under uniaxial bending loads, and determined the effects of loose tenon length （30, 45, 60, and 90 mm） and loose tenon thickness （6 and 8 mm） on bending moment capacity of M＆amp;LT joints constructed with polyvinyl acetate （PVAc） adhesive. Stress and strain distributions in joint elements were then estimated for each joint using ANSYS finite element （FE） software. The bending moment capacity of joints increased significantly with thickness and length of the tenon. Based on the FE analysis results, under uniaxial bending, the highest shear stress values were obtained in the middle parts of the tenon, while the highest shear elastic strain values were estimated in glue lines between the tenon sur-faces and walls of the mortise. Shear stress and shear elastic strain values in joint elements generally increased with tenon dimensions and corre-sponding bending moment capacities. There was consistency between predicted maximum shear stress values and failure modes of the joints.

Supply modes for renewable-based distributed energy systems and their applications:case studies in China

Distributed energy systems(DES),as an integrated energy system with coupled distributed energy resources,have great potential in reducing carbon dioxide emissions and improving energy efficiencies.Considering the background of urbanization and the energy revolution in China,the study investigates the renewable-based DESs supply modes and their application in China.A new method is proposed to classify DESs supply modes into three categories considering the renewable resource in domination,and their application domains are discussed.A comprehensive model is given for economic and environmental evaluation.Typical case studies show that the renewable-based DES systems can supply the energy in a cost-effective and environment-friendly way.Among them,the biomass waste dominated supply mode can not only achieve"zero"carbon emissions but also"zero"energy consumption,even though not yet economically attractive under the present policy and market conditions.Thus,recommendations are given to promote the further deployment of renewable-based DESs,regarding their supply modes,policy requirements,and issues to be addressed.

Sliding mode control of uncertain systems with distributed time-delay: parameter-dependent Lyapunov functional approach

The robust stability and robust sliding mode control problems are studied for a class of linear distributed time-delay systems with polytopic-type uncertainties by applying the parameter-dependent Lyapunov functional approach combining with a new method of introducing some relaxation matrices and tuning parameters, which can be chosen properly to lead to a less conservative result. First, a sufficient condition is proposed for robust stability of the autonomic system; next, the sufficient conditions of the robust stabilization controller and the existence condition of sliding mode are developed. The results are given in terms of linear matrix inequalities （LMIs）, which can be solved via efficient interior-point algorithms. A numerical example is presented to illustrate the feasibility and advantages of the proposed design scheme.

Phase synchronization processing method for alternating bistatic mode in distributed SAR

In the distributed synthetic aperture radar （SAR）, the alternating bistatic mode can perform phase reference without a synchronization link between two satellites compared with the pulsed alternate synchronization method. The key of the phase synchronization processing is to extract the oscillator phase differences from the bistatic echoes. A signal model of phase synchronization in the alternating bistatic mode is presented. The phase synchronization processing method is then studied. To reduce the phase errors introduced by SAR imaging, a sub-aperture processing method is proposed. To generalize the sub-aperture processing method, an echo-domain processing method using correlation of bistatic echoes is proposed. Finally, the residual phase errors of the both proposed processing methods are analyzed. Simulation experiments validate the proposed phase synchronization processing method and its phase error analysis results.