Experimental Study on the Dam-Break Hydrographs at the Gate Location

When studying the dam-break flow phenomenon,the basic hydrodynamic features of the dam-break flow at the gate location should be verified primarily.In this study,laboratory experiments were performed in a rectangular and horizontal flume with the same initial water head setting on the dry and wet downstream bed conditions.Water surface elevation was extracted through image analysis and validated by comparing with the data measured using a wave gauge.Temporal variation of the water surface elevation at the gate location,quantified in terms of high-speed video recorded images,can be divided into three stages,the sharp decreasing stage,the relatively steady stage,and the gradually decreasing stage.Applicability of several classic analytical solutions of the dam-break problem at the gate location was validated using present experimental data.Ritter's solution is effective for the dry bed condition while Stoker's solution could be applied to the wet bed case,and both are only applicable during the steady stage.Lin' solution reproduces the gate-site hydrographs well during both the relatively steady and the gradually decreasing stages,especially for the condition under which the down-upstream water depth ratio is smaller than 0.138.

Single gate optimization for plastic injection mold

This paper deals with a methodology for single gate location optimization for plastic injection mold. The objective of the gate optimization is to minimize the warpage of injection molded parts, because warpage is a crucial quality issue for most injection molded parts while it is influenced greatly by the gate location. Feature warpage is defined as the ratio of maximum displacement on the feature surface to the projected length of the feature surface to describe part warpage. The optimization is combined with the numerical simulation technology to find the optimal gate location, in which the simulated annealing algorithm is used to search for the optimum. Finally, an example is discussed in the paper and it can be concluded that the proposed method is effective.

Study of Asymmetric Polling System with Two Message Classes

A novel mixed polling system with multiple stations is considered. Each station produces two classes of messages served with different disciplines. The real time message served with exhaustive service discipline and the unreal time message served with gated service discipline. Using an iterative method, the exact mean waiting times for both message classes are derived. The influence of the gate location of the message class served by the gated service discipline on the mean waiting time is also analyzed. The analytical results are verified with simulation method and agree well with simulation results.