A New Clock Gated Flip Flop for Pipelining Architecture

The objective of the work is to design a new clock gated based flip flop for pipelining architecture. In computing and consumer products, the major dynamic power is consumed in the system’s clock signal, typically about 30% to 70% of the total dynamic (switching) power consumption. Several techniques to reduce the dynamic power have been developed, of which clock gating is predominant. In this work, a new methodology is applied for gating the Flip flop by which the power will be reduced. The clock gating is employed to the pipelining stage flip flop which is active only during valid data are arrived. The methodology used in project named Selective Look-Ahead Clock Gating computes the clock enabling signals of each FF one cycle ahead of time, based on the present cycle data of those FFs on which it depends. Similarly to data-driven gating, it is capable of stopping the majority of redundant clock pulses. In this work, the circuit implementation of the various blocks of data driven clock gating is done and the results are observed. The proposed work is used for pipelining stage in microprocessor and DSP architectures. The proposed method is simulated using the quartus for cyclone 3 kit.

An Improved Power Efficient Clock Pulsed D Flip-flop Using Transmission Gate

Recent digital applications will require highly efficient and high-speed gadgets and it is related to the minimum delay and power consumption.The proposed work deals with a low-power clock pulsed data flip-flop(D flip-flop)using a transmission gate.To accomplish a power-efficient pulsed D flip-flop,clock gating is proposed.The gated clock reduces the unnecessary switching of the transistors in the circuit and thus reduces the dynamic power consumption.The clock gating approach is employed by using an AND gate to disrupt the clock input to the circuit as per the control signal called Enable.Due to this process,the clock gets turned off to reduce power consumption when there is no change in the output.The proposed transmission gate-based pulsed D flip-flop’s performance with clock gating and without clock gating circuit is analyzed.The proposed pulsed D flip-flop power consumption is 1.586μw less than the without clock gated flip-flop.Also,the authors have designed a 3-bit serial-in and parallel-out shift register using the proposed D flip-flop and analyzed the performance.Tanner Electronic Design Automation tool is used to simulate all the circuits with 45 nm technology.

DESIGN OF TWO-PHASE SINUSOIDAL POWER CLOCK AND CLOCKED TRANSMISSION GATE ADIABATIC LOGIC CIRCUIT

First the research is conducted on the design of the two-phase sinusoidal power clock generator in this paper. Then the design of the new adiabatic logic circuit adopting the two-phase sinusoidal power clocks--Clocked Transmission Gate Adiabatic Logic （CTGAL） circuit is presented. This circuit makes use of the clocked transmission gates to sample the input signals, then the output loads are charged and discharged in a fully adiabatic manner by using bootstrapped N-Channel Metal Oxide Semiconductor （NMOS） and Complementary Metal Oxide Semiconductor （CMOS） latch structure. Finally, with the parameters of Taiwan Semiconductor Manufacturing Company （TSMC） 0.25um CMOS device, the transient energy consumption of CTGAL, Bootstrap Charge-Recovery Logic （BCRL） and Pass-transistor Adiabatic Logic （PAL） including their clock generators is simulated. The simulation result indicates that CTGAL circuit has the characteristic of remarkably low energy consumption.

Design of a Low Power DSP with Distributed and Early Clock Gating

A novel clock structure of a low-power 16-bit very large instruction word (VLIW) digital signal processor (DSP) was proposed. To improve deterministic clock gating and to solve the drawback of conventional clock gating circuit in high speed circuit, a distributed and early clock gating method was developed on its instruction fetch & decoder unit, its pipelined data-path unit and its super-Harvard memory interface unit. The core was implemented following the Synopsys back-end flow under TSMC (Taiwan Silicon manufacture corporation) 0.18-μm 1.8-V 1P6M process, with a core size of 2 mm×2 mm. Result shows that it can run under 200 MHz with a power performance around 0.3 mW/MIPS. Meanwhile, only 39.7% circuit is active simultaneously in average, compared to its non-gating counterparts.

An Evolutionary Normalization Algorithm for Signed Floating-Point Multiply-Accumulate Operation

In the era of digital signal processing,like graphics and computation systems,multiplication-accumulation is one of the prime operations.A MAC unit is a vital component of a digital system,like different Fast Fourier Transform(FFT)algorithms,convolution,image processing algorithms,etcetera.In the domain of digital signal processing,the use of normalization architecture is very vast.The main objective of using normalization is to performcomparison and shift operations.In this research paper,an evolutionary approach for designing an optimized normalization algorithm is proposed using basic logical blocks such as Multiplexer,Adder etc.The proposed normalization algorithm is further used in designing an 8×8 bit Signed Floating-Point Multiply-Accumulate(SFMAC)architecture.Since the SFMAC can accept an 8-bit significand and a 3-bit exponent,the input to the said architecture can be somewhere between−(7.96872)_(10) to+(7.96872)_(10).The proposed architecture is designed and implemented using the Cadence Virtuoso using 90 and 130 nm technologies(in Generic Process Design Kit(GPDK)and Taiwan Semiconductor Manufacturing Company(TSMC),respectively).To reduce the power consumption of the proposed normalization architecture,techniques such as“block enabling”and“clock gating”are used rigorously.According to the analysis done on Cadence,the proposed architecture uses the least amount of power compared to its current predecessors.

Design and implementation of a DSP with multi-level low power strategies for cochlear implants

This paper presents the design and implementation of a low power digital signal processor （THUCIDSP-1 ） targeting at application for cochlear implants. Multi-level low power strategies including algorithm optimization, operand isolation, clock gating and memory partitioning are adopted in the processor design to reduce the power consumption. Experimental results show that the complexity of the Continuous Interleaved Sampling （CIS） algorithm is reduced by more than 80 % and the power dissipation of the hardware alone is reduced by about 25% with the low power methods. The THUCIDSP-1 prototype, fabricated in 0.18-μm standard CMOS process, consumes only 1.91 mW when executing the CIS algorithm at 3 MHz.

VELAN: Variable Energy Aware Sense Amplifier Link for Asynchronous Network on Chip

A real time multiprocessor chip paradigm is also called a Network-on-Chip (NoC) which offers a promising architecture for future systems-on-chips. Even though a lot of Double Tail Sense Amplifiers (DTSA) are used in architectural approach, the conventional DTSA with transceiver exhibits a difficulty of consuming more energy and latency than its intended design during heavy traffic condition. Variable Energy aware sense amplifier Link for Asynchronous NoC (VELAN) is designed in this research to eliminate the difficulty, which is the combination of Variable DTSA circuitry (V-DTSA) and Transceiver. The V-DTSA circuitry has following components such as bootable DTSA (B-DTSA) and bootable clock gating DTSA (BCG-DTSA), Graph theory based Traffic Estimator (GTE) and controller. Depending upon the traffic rate, the controller activates necessary DTSA modules and transfers information to the receiver. The proposed VELAN design is evaluated on TSMC 90 nm technology, showing 6.157 Gb/s data rate, 0.27 w total link power and 354 ps latency for single stage operation.

Design of a passive UHF RFID tag for the ISO18000-6C protocol

This paper presents a new fully integrated wide-range UHF passive RFID tag chip design that is compatible with the ISO18000-6C protocol. In order to reduce the die area, an ultra-low power CMOS voltage regulator without resistors and an area-efficient amplitude shift keying demodulator with a novel adaptive average generator are both adopted. A low power clock generator is designed to guarantee the accuracy of the clock under 4-4%. As the clock gating technology is employed to reduce the power consumption of the baseband processor, the total power consumption of the tag is about 14μW with a sensitivity of -9.5 dBm. The detection distance can reach about 5 m under 4 W effective isotropic radiated power. The whole tag is fabricated in TSMC 0.18μm CMOS technology and the chip size is 880 × 880μm^2.