zirconia-based nanostructured coatings were deposited on AA2024 to improve the corrosion resistance properties. Three different nanostructured coatings, namely, zirconia–benzotriazole, zirconia–alumina–benzotriazol...zirconia-based nanostructured coatings were deposited on AA2024 to improve the corrosion resistance properties. Three different nanostructured coatings, namely, zirconia–benzotriazole, zirconia–alumina–benzotriazole, and zirconia–yttria–benzotriazole, were applied on AA2024 via a sol–gel method using the dip-coating technique. Next, the coatings were annealed at 150°C after each dipping period. The phases and morphologies of the coatings were investigated using grazing incidence X-ray diffraction(GIXRD), Fourier transform infrared spectroscopy(FT-IR), field emission scanning electron microscopy(FESEM), and atomic force microscopy(AFM). The corrosion properties were evaluated using electrochemical methods, including polarization and electrochemical impedance techniques in 3.5 wt% NaCl solution. The obtained results confirm the formation of homogeneous and crack free zirconia-benzotriazole-based nanostructured coatings. The average roughness values for zirconia-benzotriazole, zirconia-alumina-benzotriazole, and zirconia-yttria-benzotriazole nanostructured coatings were 30, 8, and 6 nm, respectively. The presence of alumina as a stabilizer on zirconia coating was found to have a beneficial impact on the stability of the corrosion resistance for different immersion times. In fact, the addition of alumina resulted in the dominance of the healing behavior in competition with the corrosion process of zirconia-benzotriazole nanostructured coating.展开更多
Dynamic viscoelastic properties of polyacrylonitrile(PAN)/DMSO/H2O solutions with different H2O contents were studied as a function of temperature.These PAN solutions gradually became gel with decreasing temperature.T...Dynamic viscoelastic properties of polyacrylonitrile(PAN)/DMSO/H2O solutions with different H2O contents were studied as a function of temperature.These PAN solutions gradually became gel with decreasing temperature.The sol-gel transition took place at a critical gel temperature,at which the scaling law of G'(ω)～G″(ω)∝ωn held,allowing an accurate determination of the critical gel temperature by means of the frequency independence of the loss tangent.The gel point of PAN solutions increases with increasing H2O content.The scaling exponent n(=0.86) at the gel point is confirmed to be universal for PAN gels,which is independent of temperature,suggesting the similarity of the fractal structure in the critical PAN gels.展开更多
The preparation of LiNbO 3 films on Si substrates was improved by adding CH 3CH 2OH solution containing a little water to the sol of LiNb(OC 2H 5) 6. The crystallization behavior of LiNbO 3 films on Si (111) substrate...The preparation of LiNbO 3 films on Si substrates was improved by adding CH 3CH 2OH solution containing a little water to the sol of LiNb(OC 2H 5) 6. The crystallization behavior of LiNbO 3 films on Si (111) substrates was studied and completely c axis oriented LiNbO 3 films were obtained. Such factors as the hydrogen termination of silicon surface, the RTP annealing process used, the unidirectional heat flow and the preheating temperature were taken into consideration while the crystallization of c axis oriented films was analysed. Surface morphologies of the films annealed in RTP and conventional furnaces were observed by means of AFM.展开更多
Three kinds of amphiphilic PMADAB gels were prepared through radiation-induced polymerization and crosslinking of methacryloxyethyl dimethylalkane ammonium bromide(MADAB) with different alkyl side chains(butyl,octyl a...Three kinds of amphiphilic PMADAB gels were prepared through radiation-induced polymerization and crosslinking of methacryloxyethyl dimethylalkane ammonium bromide(MADAB) with different alkyl side chains(butyl,octyl and dodecyl).The length of alkyl side chains had significant influence on swelling behavior of the PMADAB gels in alcohol/water solvent.Equilibrium swelling degree(EDS) of PMBDAB(butyl) gel in water was ca.160 and decreased with increasing alcohol content(x),whereas EDS of PMODAB(octyl)and PMDDDAB(dodecyl) gels showed a convex-upward function of x,i.e.,these two gels barely swelled in pure water and swelled with increasing x and then shrank gradually.This phenomenon was explained by the hydrophobic association of long alkyl chains and a cosolvency effect of PMADAB in alcohol and water.The swelling behavior of PMADAB gels in methanol,ethanol and isopropanol were similar,and their EDS are related with the dielectric constant of alcohol solvents.The results suggest that PMADAB gels may be potential absorbents for various kinds of alcohols.展开更多
X-ray powder diffraction and Fourier transform infrared spectroscopy were applied for characterization of Li2O-Al2O3-SiO2 glass-ceramic powders doped with Eu2O3,Gd2O3 and Er2O3,respectively,in the conditions of differ...X-ray powder diffraction and Fourier transform infrared spectroscopy were applied for characterization of Li2O-Al2O3-SiO2 glass-ceramic powders doped with Eu2O3,Gd2O3 and Er2O3,respectively,in the conditions of different heat-treatment temperatures and with various amounts.The powders were derived from the polyacrylamide gel method.The results show that,the wet gels prepared by polyacrylamide perform a unique crystallization behavior in the process of drying,comparing with some customary preparation such as melt processing.The main crystal phase and crystallization sequence of Li2O-Al2O3-SiO2 micro-powders have no distinct with addition of Eu2O3,Gd2O3 or Er2O3,while the crystallization temperature of the β-spodumene decreased and the amount of the β-spodumene increased.展开更多
In this work, we succeeded in the preparation of LiNb 1- x Ta x O 3 films on Si(111) substrates by means of sol gel process, and the usual sol gel process for the preparation of LiNbO 3 and LiTaO 3 films on Si substra...In this work, we succeeded in the preparation of LiNb 1- x Ta x O 3 films on Si(111) substrates by means of sol gel process, and the usual sol gel process for the preparation of LiNbO 3 and LiTaO 3 films on Si substrates was improved by adding a 33% aqueous solution of CH 3CH 2OH to the mixed sols of LiNb(OCH 2CH 3) 6 and LiTa(OCH 2CH 3) 6 . The crystallization behavior of LiNb 1- x Ta x O 3 films on Si(111) substrates has been studied. Highly c axis oriented LiNb 1- x Ta x O 3 films have been obtained within the tantalum composition range of \{0< x <0 33\}. Some factors such as the hydrogen termination of the silicon surface, the RTP annealing process that provides the unidirectional heat flow and the preheating temperature are discussed to analyze the crystallization of the c axis oriented films.展开更多
文摘zirconia-based nanostructured coatings were deposited on AA2024 to improve the corrosion resistance properties. Three different nanostructured coatings, namely, zirconia–benzotriazole, zirconia–alumina–benzotriazole, and zirconia–yttria–benzotriazole, were applied on AA2024 via a sol–gel method using the dip-coating technique. Next, the coatings were annealed at 150°C after each dipping period. The phases and morphologies of the coatings were investigated using grazing incidence X-ray diffraction(GIXRD), Fourier transform infrared spectroscopy(FT-IR), field emission scanning electron microscopy(FESEM), and atomic force microscopy(AFM). The corrosion properties were evaluated using electrochemical methods, including polarization and electrochemical impedance techniques in 3.5 wt% NaCl solution. The obtained results confirm the formation of homogeneous and crack free zirconia-benzotriazole-based nanostructured coatings. The average roughness values for zirconia-benzotriazole, zirconia-alumina-benzotriazole, and zirconia-yttria-benzotriazole nanostructured coatings were 30, 8, and 6 nm, respectively. The presence of alumina as a stabilizer on zirconia coating was found to have a beneficial impact on the stability of the corrosion resistance for different immersion times. In fact, the addition of alumina resulted in the dominance of the healing behavior in competition with the corrosion process of zirconia-benzotriazole nanostructured coating.
基金Project(2006CB606505) supported by the National Basic Research Development Program of ChinaProject(50333050) supported by the National Natural Science Foundation of China+1 种基金Project(07DJ14002) supported by the Shanghai Fundamental Theory ProgramProject(20020255010) supported by the Specialized Research Fund for the Doctoral Program of Higher Education
文摘Dynamic viscoelastic properties of polyacrylonitrile(PAN)/DMSO/H2O solutions with different H2O contents were studied as a function of temperature.These PAN solutions gradually became gel with decreasing temperature.The sol-gel transition took place at a critical gel temperature,at which the scaling law of G'(ω)～G″(ω)∝ωn held,allowing an accurate determination of the critical gel temperature by means of the frequency independence of the loss tangent.The gel point of PAN solutions increases with increasing H2O content.The scaling exponent n(=0.86) at the gel point is confirmed to be universal for PAN gels,which is independent of temperature,suggesting the similarity of the fractal structure in the critical PAN gels.
文摘The preparation of LiNbO 3 films on Si substrates was improved by adding CH 3CH 2OH solution containing a little water to the sol of LiNb(OC 2H 5) 6. The crystallization behavior of LiNbO 3 films on Si (111) substrates was studied and completely c axis oriented LiNbO 3 films were obtained. Such factors as the hydrogen termination of silicon surface, the RTP annealing process used, the unidirectional heat flow and the preheating temperature were taken into consideration while the crystallization of c axis oriented films was analysed. Surface morphologies of the films annealed in RTP and conventional furnaces were observed by means of AFM.
基金Supported by the China Postdoctoral Science Foundation(No.2012M520164)the Fundamental Research Funds for the Central Universities(No.FRF-TP-13-008A)
文摘Three kinds of amphiphilic PMADAB gels were prepared through radiation-induced polymerization and crosslinking of methacryloxyethyl dimethylalkane ammonium bromide(MADAB) with different alkyl side chains(butyl,octyl and dodecyl).The length of alkyl side chains had significant influence on swelling behavior of the PMADAB gels in alcohol/water solvent.Equilibrium swelling degree(EDS) of PMBDAB(butyl) gel in water was ca.160 and decreased with increasing alcohol content(x),whereas EDS of PMODAB(octyl)and PMDDDAB(dodecyl) gels showed a convex-upward function of x,i.e.,these two gels barely swelled in pure water and swelled with increasing x and then shrank gradually.This phenomenon was explained by the hydrophobic association of long alkyl chains and a cosolvency effect of PMADAB in alcohol and water.The swelling behavior of PMADAB gels in methanol,ethanol and isopropanol were similar,and their EDS are related with the dielectric constant of alcohol solvents.The results suggest that PMADAB gels may be potential absorbents for various kinds of alcohols.
文摘X-ray powder diffraction and Fourier transform infrared spectroscopy were applied for characterization of Li2O-Al2O3-SiO2 glass-ceramic powders doped with Eu2O3,Gd2O3 and Er2O3,respectively,in the conditions of different heat-treatment temperatures and with various amounts.The powders were derived from the polyacrylamide gel method.The results show that,the wet gels prepared by polyacrylamide perform a unique crystallization behavior in the process of drying,comparing with some customary preparation such as melt processing.The main crystal phase and crystallization sequence of Li2O-Al2O3-SiO2 micro-powders have no distinct with addition of Eu2O3,Gd2O3 or Er2O3,while the crystallization temperature of the β-spodumene decreased and the amount of the β-spodumene increased.
基金Supported by the National Natural Science Foundation of China(No.2 0 1710 15 )
文摘In this work, we succeeded in the preparation of LiNb 1- x Ta x O 3 films on Si(111) substrates by means of sol gel process, and the usual sol gel process for the preparation of LiNbO 3 and LiTaO 3 films on Si substrates was improved by adding a 33% aqueous solution of CH 3CH 2OH to the mixed sols of LiNb(OCH 2CH 3) 6 and LiTa(OCH 2CH 3) 6 . The crystallization behavior of LiNb 1- x Ta x O 3 films on Si(111) substrates has been studied. Highly c axis oriented LiNb 1- x Ta x O 3 films have been obtained within the tantalum composition range of \{0< x <0 33\}. Some factors such as the hydrogen termination of the silicon surface, the RTP annealing process that provides the unidirectional heat flow and the preheating temperature are discussed to analyze the crystallization of the c axis oriented films.
