Versatile MXene Gels Assisted by Brief and Low‑Strength Centrifugation

Due to the mutual repulsion between their hydrophilic surface terminations and the high surface energy facilitating their ran-dom restacking,2D MXene nanosheets usually cannot self-assemble into 3D macroscopic gels with various applications in the absence of proper linking agents.In this work,a rapid spontaneous gelation of Ti3C2Tx MXene with a very low dispersion concentration of 0.5 mg mL^(-1) into multifunctional architectures under moderate centrifugation is illustrated.The as-prepared MXene gels exhibit reconfigurable internal structures and tunable rheological,tribological,electrochemical,infrared-emissive and photothermal-conversion properties based on the pH-induced changes in the surface chemistry of Ti_(3)C_(2)T_(x) nanosheets.By adopting a gel with optimized pH value,high lubrication,exceptional specific capacitances(~635 and~408 F g^(-1) at 5 and 100 mV s^(-1),respectively),long-term capacitance retention(~96.7%after 10,000 cycles)and high-precision screen-or extrusion-printing into different high-resolution anticounterfeiting patterns can be achieved,thus displaying extensive potential applications in the fields of semi-solid lubrication,control-lable devices,supercapacitors,information encryption and infrared camouflaging.

Highly Porous Yet Transparent Mechanically Flexible Aerogels Realizing Solar-Thermal Regulatory Cooling

The demand for highly porous yet transparent aerogels with mechanical flexibility and solar-thermal dual-regulation for energy-saving windows is significant but challenging.Herein,a delaminated aerogel film(DAF)is fabricated through filtration-induced delaminated gelation and ambient drying.The delaminated gelation process involves the assembly of fluorinated cellulose nanofiber(FCNF)at the solid-liquid interface between the filter and the filtrate during filtration,resulting in the formation of lamellar FCNF hydrogels with strong intra-plane and weak interlayer hydrogen bonding.By exchanging the solvents from water to hexane,the hydrogen bonding in the FCNF hydrogel is further enhanced,enabling the formation of the DAF with intra-layer mesopores upon ambient drying.The resulting aerogel film is lightweight and ultra-flexible,which pos-sesses desirable properties of high visible-light transmittance(91.0%),low thermal conductivity(33 mW m^(-1) K^(-1)),and high atmospheric-window emissivity(90.1%).Furthermore,the DAF exhibits reduced surface energy and exceptional hydrophobicity due to the presence of fluorine-containing groups,enhancing its durability and UV resistance.Consequently,the DAF has demonstrated its potential as solar-thermal regulatory cooling window materials capable of simultaneously providing indoor lighting,thermal insulation,and daytime radiative cooling under direct sunlight.Significantly,the enclosed space protected by the DAF exhibits a temperature reduction of 2.6℃ compared to that shielded by conventional architectural glass.

Investigation of the effect of hydrocarbons and monoesters in the gelators’composition on the properties of edible oleogel

Natural wax gelators have different compositions of compounds(hydrocarbons,wax esters,free fatty alcohols,and free fatty acids),which results in oleogels with varying properties.To maintain a consistent composition,the individual components can be added to the original wax gelator.The content of hydrocarbons and wax esters greatly affects the structuring process of liquid edible oils with waxes.The aim of this study was to evaluate the possibility of modifying the properties of beeswax as a gelling agent by adding hydrocarbons or monoesters to obtain oleogels with specific properties.Various tests were conducted to assess the changes in the oleogel properties,such as color,microstructure,oil-binding capacity,thermal and textural properties.The research results have shown that the addition of the studied fractions has led to a significant change in all properties of oleogels.The initial size of oleogel crystals(7.29±1.80μm)changed after adding fractions,varying from 5.28μm to 12.58μm with hydrocarbons and from 9.95μm to 30.41μm with wax esters.The addition of 30%–50% hydrocarbons decreased the ability of the oleogels to bind oil and made them less firm compared to samples with 10%-20% hydrocarbons.Adding 10%-20% monoesters increased the firmness of the oleogels,but this indicator decreased when their content was increased to 50%.The obtained data indicate that hydrocarbons and wax esters can be used for targeted correction of the gelling properties of beeswax.

Preparation and Properties of Spray Polyurea Elastomer for Aquaculture Foam Floating Balls

[Objectives] This study was conducted to develop a polyurea elastomer which can be sprayed on the surface of expanded polystyrene (EPS) floating balls, so as to improve the surface strength and service life of the floating balls. [Methods] The effects of the types and amounts of isocyanate, chain extenders and polyether polyols on the gelation rate, adhesion and wear resistance of polyurea elastomer were investigated, and it was finally determined the preparation process of polyurea elastomer using liquid isophorone diisocyanate (IPDI) and amino-terminated polyether (D2000) as the main raw materials, dimethylthiotoluene diamine (E300) as the chain extender and silica as the wear resistance modifier through two-step solution polymerization of prepolymerization and chain extension. [Results] The physical properties and chemical resistance tests of spray polyurea elastomer showed that it had good physical properties and acid and alkali resistance, and could meet the requirements of spraying and protection of EPS floating ball surface in marine environment. [Conclusions] Polyurea elastomer coating can improve the aging resistance, wear resistance and acid and alkali resistance of EPS floating balls, and prevent them from being fragile and floating randomly to form marine floating garbage which results in "white pollution".

Gelation of Hole Transport Layer to Improve the Stability of Perovskite Solar Cells

To achieve high power conversion efficiency(PCE) and long-term stability of perovskite solar cells(PSCs), a hole transport layer(HTL) with persistently high conductivity, good moisture/oxygen barrier ability, and adequate passivation capability is important. To achieve enough conductivity and effective hole extraction, spiro-OMe TAD, one of the most frequently used HTL in optoelectronic devices, often needs chemical doping with a lithium compound(LiTFSI). However, the lithium salt dopant induces crystallization and has a negative impact on the performance and lifetime of the device due to its hygroscopic nature. Here, we provide an easy method for creating a gel by mixing a natural small molecule additive(thioctic acid, TA) with spiro-OMe TAD. We discover that gelation effectively improves the compactness of resultant HTL and prevents moisture and oxygen infiltration. Moreover, the gelation of HTL improves not only the conductivity of spiro-OMe TAD, but also the operational robustness of the devices in the atmospheric environment. In addition, TA passivates the perovskite defects and facilitates the charge transfer from the perovskite layer to HTL. As a consequence, the optimized PSCs based on the gelated HTL exhibit an improved PCE(22.52%) with excellent device stability.

Rheo-optic in situ synchronous study on the gelation behaviour and mechanism of waxy crude oil emulsions

An improved rheo-optic in situ synchronous measurement system was employed to investigate the gelation behaviour and mechanism of waxy crude oil emulsions. By combining transmitted natural light and reflected polarized light microscopy, a multiangle composite light source was built to achieve the simultaneous observation of wax crystals and emulsified water droplets, as well as their dynamic aggregation process. Main outcomes on the microscopic mechanism were obtained by developed microscopic image processing method. It was found that the microstructure of W/O waxy crude oil emulsion has the evolution of “individual structure--homogeneous aggregate structure--heterogeneous coaggregate structure--floc structure” during the static cooling, which results in the four stages during gelation process. Different from previous studies, the aggregation of emulsified water droplets was found to be more significant and contributes to the formation and development of the wax crystals-emulsified water droplets coaggregate, which plays a decisive role in the further evolution of the gelled microstructure. Time series microscopic images show the dynamic aggregation of emulsified water droplets and wax crystals. Two different aggregation behaviours between wax crystals and water droplets were observed. That wax crystals can not only embed in gaps between adjacent water droplets and enhance the structure, but also surround the outside of the water droplets and continue to grow resulting in the interconnection of different coaggregates to form a larger floc structure. In addition, correlation between viscoelasticity and microstructure evolution of waxy crude oil emulsions of different water contents was discussed. With increasing water contents, the microstructure is changed from wax crystal flocculation structure as the main skeleton and the emulsified water droplets embedded in it, into the aggregation of emulsified water droplets occupying the main position. When the number of wax crystals and water droplets reaches a certain ratio, did wax crystals form coaggregates with emulsified water droplets, and the remaining wax crystals formed an overall flocculation structure, the viscoelasticity of the waxy crude oil emulsion is the highest.

Preparation of multicore millimeter-sized spherical alginate capsules to specifically and sustainedly release fish oil

Specific and sustained release of nutrients from capsules to the gastrointestinal tract has attracted many attentions in the field of food and drug delivery.In this work,we reported a monoaxial dispersion electrospraying-ionotropic gelation technique to prepare multicore millimeter-sized spherical capsules for specific and sustained release of fish oil.The spherical capsules had diameters from 2.05 mm to 0.35 mm with the increased applied voltages.The capsules consisted of uniform(at applied voltages of≤10 k V)or nonuniform(at applied voltages of>10 k V)multicores.The obtained capsules had reasonable loading ratios(9.7%-6.3%)due to the multicore structure.In addition,the obtained capsules had specific and sustained release behaviors of fish oil into the small intestinal phase of in vitro gastrointestinal tract and small intestinal tract models.The simple monoaxial dispersion electrospraying-ionotropic gelatin technique does not involve complicated preparation formulations and polymer modification,which makes the technique has a potential application prospect for the fish oil preparations and the encapsulation of functional active substances in the field of food and drug industries.

Facile synthesis of chromium chloride/poly(methyl methacrylate) core/shell nanocapsules by inverse miniemulsion evaporation method and application as delayed crosslinker in secondary oil recovery

Cr(III)ehydrolyzed polyacrylamide(HPAM)gels have been extensively studied as a promising strategy controlling waste water production for mature oilfields.However,the gelation time of the current technologies is not long enough for in-depth placement.In this study,we report a novel synthesis method to obtain chromium chloride/poly(methyl methacrylate)(PMMA)nanocapsules which can significantly delay the gelation of HPAM through encapsulating the chromium chloride crosslinker.The chromium chloride-loaded nanocapsules(CreNC)are prepared via a facile inverse miniemulsion evaporation method during which the hydrophobic PMMA polymers,pre-dispersed in an organic solvent,were carefully controlled to precipitate onto stable aqueous miniemulsion droplets.The stable aqueous nanodroplets(W)containing Cr(III)are dispersed in a mixture of organic solvent(O1)with PMMA and nonsolvent medium(O2)to prepare an inverse miniemulsion.With the evaporation of the O1,PMMA forms CreNCs around the aqueous droplets.The CreNCs are readily transferred into water from the organic nonsolvent phase.The CreNCs exhibit the tunable size(358-983 nm),Cr loading(7.1%-19.1%),and Cr entrapment efficiency(11.7%-80.2%),with tunable zeta potentials in different PVA solutions.The CreNCs can delay release of Cr(III)and prolong the gelation time of HPAM up to 27 days.

Eutectic Solution Enables Powerful Click Reaction for In-Situ Construction of Advanced Gel Electrolytes

Thiol-ene click reaction is an intriguing strategy for preparing polymer electrolytes due to its high activity,atom economy and less side reaction.However,the explosive reaction rate and the use of non-electrolytic amine catalyst hamper its application in in-situ batteries.Herein,a nitrogen-containing eutectic solution is designed as both the catalyst of the thiol-ene reaction and the plasticizer to in-situ synthesize the gel polymer electrolytes,realizing a mild in-situ gelation process and the preparation of high-performance gel electrolytes.The obtained gel polymer electrolytes exhibit a high ionic conductivity of 4×10^(−4)S cm^(−1)and lithium-ion transference number(t_(Li)^(+))of 0.51 at 60°C.The as-assembled Li/LiFePO_(4)(LFP)cell delivers a high initial discharge capacity of 155.9 mAh g^(-1),and a favorable cycling stability with the capacity retention of 82%after 800 cycles at 1 C is also obtained.In addition,this eutectic solution significantly improves the rate performance of the LFP cell with high specific capacity of 141.5 and 126.8 mAh g^(-1)at 5 C and 10 C,respectively,and the cell can steadily work at various charge–discharge rate for 200 cycles.This powerful and efficient strategy may provide a novel way for in-situ preparing gel polymer electrolytes with desirable comprehensive performances.

PVA/Gelatin复合树脂对银杏黄酮吸附性能的研究

合成不同类型的PVA/Gelatin复合树脂,并通过吸附解吸实验,吸附动力学实验,筛选出最佳树脂PJ11,并对其进行研究。实验结果表明PJ11树脂对银杏黄酮有选择性吸附,是一种较适宜的吸附剂。

Metal cation crosslinking of Ti O_2-alginate hybrid gels

In order to improve the substrate diffusion properties and stability of an immobilized enzyme alginate microgels modified with TiO2 nanoparticles were employed as the enzyme immobilizing support.Ionotropic gelation was applied for the preparation of hybrid gels while Ca2＋ Ce3＋ Ni2＋Cu2＋and Fe3＋were employed as the crosslinkers.Papain was selected as the model enzyme. UV-Vis spectroscopy was employed to investigate the activity of papain to evaluate kinetics and stability.Analysis results show that the highest affinity the lowest Michaelis-Menten constant Km =11.0 mg/mL and the highest stability are obtained when using Cu2＋as the crosslinker.The effect of the mass ratio of TiO2 to papain on the stability and leakage of papain is also investigated and the results show that 10∶1 TiO2∶papain is optimal because the proper use of TiO2 can reduce enzyme leakage and ensure enzyme stability.Preparing Cu/alginate/TiO2 hybrid gels via ionotropic gelation can provide a satisfactory diffusion capability and enzyme stability.

Ultralight Magnetic and Dielectric Aerogels Achieved by Metal-Organic Framework Initiated Gelation of Graphene Oxide for Enhanced Microwave Absorption

The development of a convenient methodology for synthesizing the hierarchically porous aerogels comprising metal–organic frameworks(MOFs)and graphene oxide(GO)building blocks that exhibit an ultralow density and uniformly distributed MOFs on GO sheets is important for various applications.Herein,we report a facile route for synthesizing MOF/reduced GO(rGO)aerogels based on the gelation of GO,which is directly initiated using MOF crystals.Free metal ions exposed on the surface of MIL-88A nanorods act as linkers that bind GO nanosheets to a three-dimensional porous network via metal–oxygen covalent or electrostatic interactions.The MOF/rGOderived magnetic and dielectric aerogels Fe_(3)O_(4)@C/rGO and Ni-doped Fe_(3)O_(4)@C/rGO show notable microwave absorption(MA)performance,simultaneously achieving strong absorption and broad bandwidth at low thickness of 2.5(-58.1 dB and 6.48 GHz)and 2.8 mm(-46.2 dB and 7.92 GHz)with ultralow filling contents of 0.7 and 0.6 wt%,respectively.The microwave attenuation ability of the prepared aerogels is further confirmed via a radar cross-sectional simulation,which is attributed to the synergistic effects of their hierarchically porous structures and heterointerface engineering.This work provides an effective pathway for fabricating hierarchically porous MOF/rGO hybrid aerogels and offers magnetic and dielectric aerogels for ultralight MA.

Supercooling Suppression of Microencapsulated n-Alkanes by Introducing an Organic Gelator

Supercooling of the microencapsulated phase change materials（PCMs） during cooling usually happens. This phenomenon can interfere with heat transfer and is necessary to further overcome. In this study, mela- mine-formaldehyde microcapsules containing two n-alkane PCMs, namely, n-dodecane（Cl2） or n-tetradecane（C14） were prepared by in situ polymerization. A small amount of n-hexatriacontane（C36） was introduced as an organic ge- lator into the core of microcapsules to cope with the supercooling problem. Analyses demonstrate that supercooling of the microencapsulated C12 or C14 was significantly suppressed by adding 3%（mass fraction） C36, without changing the spherical morphology and dispersibility. It could be also found that the enthalpy of microencapsulated CI2 or C14 containing C36 was similar to that of microencapsulated n-alkanes without C36, whereas the difference between onsets of crystallization and melting（degree of supercooling） is similar to that of those of pure n-alkanes, suggesting the re- markable suppression ability of the organic gelator on supercooling.

The Fabrication of Microstructure Surface of Superhydrophobic Coating by Surface Gelation Technology

The microstructured surface of materials were fabricated by a two-step acid-base catalyzed sol-gel process. In fluorinated polymer with PTFE doping, the well-proportioned composite sols were prepared using sol-gel processing under the hydrochloric acid and deficiency of water conditions. After the substrate was coated by composite sols, and the gelation treatment on the surface of composite coating, the micrometer-scale and nanometer-scale hierarchical structures were formed in surface layer of material. XPS and TEM technologies were employed to identify that the gelation occurs just on the surface of composite coating. The morphology of coating surface was observed by SEM and AFM technologies. The microstructured surface of material can be fabricated using this inexpensive and easily controlled method on low surface energy resin materials, the super-hydrophobic coatings materials can be prepared.

Preparation and characterization of nanoparticles from quaternized cyclodextrin-grafted chitosan associated with hyaluronic acid for cosmetics

Hyaluronic acid(HA, 20–50 kDa) is a hydrophilic macromolecule with anti-wrinkle effects and moisturizing properties. However, its high molecular weight prevents it from penetrating into the deeper layers of the skin and, thus, limits its benefits to topical effects. Thus, the objective of this study is to prepare nanoparticles of quaternized cyclodextrin-grafted chitosan(QCD-g-CS) associated with HA in different molar ratios of QCD-g-CS and HA. The conjugation of the carboxylic moieties of HA and the amides of QCD-g-CS was confirmed by Fourier-transform infrared spectroscopy. Thus, the system was optimized to create nanoparticles with a small size(235.63 ± 21.89 nm), narrow polydispersity index(0.13 ± 0.02), and zeta potential of 16.07 ± 0.65 m V. The association efficiency and loading efficiency were determined by ultra-performance liquid chromatography as 86.77 ± 0.69% and 10.85 ± 0.09%, respectively. The spherical morphology of the obtained nanoparticles was confirmed by transmission electron microscopy. Moreover, the in-vitro hydrating ability was significantly higher( P < 0.001) than that of bulk HA(3.29 ± 0.41 and 1.71 ± 0.05 g water/g sample, respectively). The safety of these nanoparticles at concentrations in the range of 0.01–0.10 mg/ml was confirmed via tests on human skin fibroblasts. Together, these results demonstrate that the developed nanoparticles are promising for future applications in cosmetics.

CHARACTERIZATION OF RADIATION CROSSLINKING DENSITY OF F-40

In this paper, radiation-induced crosslinking mechanism and characterization of the crosslinking density of F-40 and F-4 by X-ray photoelectron spectroscopy （XPS） have been studied. The dose of gelation of F-40 obtained from XPS is 4.1×10;Gy. It is found that crosslinking density is the largest in the range of certain dose for F-40 and F-4.

Synthesis of azobenzene-containing liquid crystalline gelator for use in liquid crystal gels

A liquid crystalline gelator containing the azobenzene chromophore was synthesized for the first time; it was used to form self- assembled network in nematic liquid crystals resulting in liquid crystal gels with distinct features.

Chitosan-Pectin Synergistic Interaction and Gelation

Mixed gels of chitosan-pectin were prepared by varying the ratio of constituents in the presence of NaCl. Mixed gel at 3%of total polysaccharide concentration with addtion of 12%NaCl showed a synergistic maximum when the ratio of chitosan to pectin was 60: 40. The effect of the polysaccharide concentration, the preparation temperature (T p), the time of incubation, balk salt concentration, the molecular weight and the degree of deacetylation of chitosan on gelation have been studied. Interaction mechanism between molecules of both polysaccharides was investigated by FT-IR spectrometry.

Highly stable supramolecular hydrogels formed from 1,3,5-benzenetricarboxylic acid and hydroxyl pyridines

New supramolecular hydrogels with the maximal sol-gel transition temperature （Tgel） of 95 ℃ were obtained by using gelators formed from 1,3,5-benzenetricarboxylic acid （BTA） and para-hydroxyl pyridine （PHP） or meta-hydroxyl pyridine （MHP）. The single crystal structure of the complex formed from BTA and ortho-hydroxyl pyridine （OHP） indicated that the molecules assembled into superstructure via both hydrogen bonds and π--π stacking interaction.

Synergistic Interaction and Gelation in Cationic Guar Gum-Sodium Alginate System

The synergistic interaction between the cationic guar gum (the ammonium hydroxy-propyl-trimethyl chloride of guar gum) and sodium alginate has been studied. The effects of the mass ratio of them, mixed temperature, balk salt ion concentration, incubation time and pH value on gelation were investigated. It has been observed that there was a gel strength maximum when the mass ratio was 0.6, the mixed temperature was 70°C, the balk salt ion concentration was 1.0 mol·L?1, the incubation time was 30 min and the pH value was 8. Interaction between molecules of these two polysaccharides was investigated by FT-IR spectrometry. Key words cationic guar gum - sodium alginate - gelation - synergism CLC number O 629.12 Foundation item: Supported by the National Natural Science Foundation of China(29574173)Biography: He Dong-bao (1945-), male, Associate professor, research direction: modifying and gelating of natural polysaccharides.