Application of Generalized Predictive Adaptive Control Algorithm in the Design of Missile Control System

To study the application of the generalized predictive adaptive control algorithm in missile control system, the algorithm is presented based on the recursive least square estimation, and a controller of the pitch channel of a missile is designed by using this algorithm. The simulations verify that the designed controller can meet the demands of the task well.

Improved Generalized Predictive Control Algorithm with Offline and Online Identification and Its Application to Fixed Bed Reactor

An improved generalized predictive control algorithm is presented in thispaper by incorporating offline identification into online identification. Unlike the existinggeneralized predictive control algorithms, the proposed approach divides parameters of a predictivemodel into the time invariant and time-varying ones, which are treated respectively by offline andonline identification algorithms. Therefore, both the reliability and accuracy of the predictivemodel are improved. Two simulation examples of control of a fixed bed reactor show that this newalgorithm is not only reliable and stable in the case of uncertainties and abnormal disturbances,but also adaptable to slow time varying processes.

Neuro-fuzzy generalized predictive control of boiler steam temperature

Power plants are nonlinear and uncertain complex systems. Reliable control of superheated steam temperature is necessary to ensure high efficiency and high load-following capability in the operation of modem power plant. A nonlinear generalized predictive controller based on neuro-fuzzy network （NFGPC） is proposed in this paper. The proposed nonlinear controller is applied to control the superheated steam temperature of a 200MW power plant. From the experiments on the plant and the simulation of the plant, much better performance than the traditional controller is obtained,

THE PRINCIPLE OF ROBUSTNESS IN GENERALIZED PREDICTIVE CONTROL

This paper deeply analyzes the closed-loop nature ofGPCin the fram ework ofinter- nalm odelcontrol(IMC) theory. A new sort ofrelation lies in the feedback structure so that robustreason can be satisfactorily explained. The resultissignificantbecause the previous con- clusions are only applied to open-loop stable plant(orm odel).

ON THE ROBUSTNESS OF A GENERALIZED PREDICTIVE CONTROLLER

In this paper, we present a quantitative analysis of the robustness of a generalized predictive controller. The result of stability analysis shows that, under a specific bounded modelling error, the closed-loop system is BIBO stable in the presence of unmodelled dynamics.

Proportion integral-type active disturbance rejection generalized predictive control for distillation process based on grey wolf optimization parameter tuning

The high-purity distillation column system is strongly nonlinear and coupled,which makes it difficult to control.Active disturbance rejection control(ADRC)has been widely used in distillation systems,but it has limitations in controlling distillation systems with large time delays since ADRC employs ESO and feedback control law to estimate the total disturbance of the system without considering the large time delays.This paper designs a proportion integral-type active disturbance rejection generalized predictive control(PI-ADRGPC)algorithm to control the distillation column system with large time delay.It replaces the PD controller in ADRC with a proportion integral-type generalized predictive control(PI-GPC),thereby improving the performance of control systems with large time delays.Since the proposed controller has many parameters and is difficult to tune,this paper proposes to use the grey wolf optimization(GWO)to tune these parameters,whose structure can also be used by other intelligent optimization algorithms.The performance of GWO tuned PI-ADRGPC is compared with the control performance of GWO tuned ADRC method,multi-verse optimizer(MVO)tuned PI-ADRGPC and MVO tuned ADRC.The simulation results show that the proposed strategy can track reference well and has a good disturbance rejection performance.

Application of generalized predictive control in networked control system

A new framework for networked control system based on Generalized Predictive Control (GPC) is proposed in this paper. Clock-driven sensors, event-driven controller, and clock-driven actuators are required in this framework. A queuing strategy is proposed to overcome the network induced delay. Without redesigning, the proposed framework enables the existing GPC controller to be used in a network environment. It also does not require clock synchronization and is only slightly affected by bad network condition such as package loss. Various experiments are designed over the real network to test the proposed approach, which verify that the proposed approach can stabilize the Networked Control System (NCS) and is robust.

Generalized Internal Model Robust Control for Active Front Steering Intervention

Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in order to guarantee the stability of active front steering system（AFS）controller,the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control.In this paper,a generalized internal model robust control（GIMC）that can overcome the contradiction between performance and stability is used in the AFS control.In GIMC,the Youla parameterization is used in an improved way.And GIMC controller includes two sections：a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters＇uncertainties and some external disturbances.Simulations of double lane change（DLC）maneuver and that of braking on split-μroad are conducted to compare the performance and stability of the GIMC control,the nominal performance PID controller and the H_∞controller.Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle＇s parameters variations,H_∞controller is conservative so that the performance is a little low,and only the GIMC controller overcomes the contradiction between performance and robustness,which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller.Therefore,the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system,that is,can solve the instability of PID or LQP control methods and the low performance of the standard H_∞controller.

SIMULATION STUDY OF GENERALIZED PREDICTIVE CONTROL FOR TURBINE POWER

A GPC (generalized predictive control) law is developed to control the powerof a turbine, after transforming the nonlinear mathematical model of the power regulation systeminto a CARIMA(controlled auto-regressive integrated moving average) form. The effect of the newcontrol law is compared with a traditional PID (proportional, integral and differential) control lawby numerical simulation. The simulation results verify the effectiveness, the correctness and theadvantage of the new control scheme.

ADAPTIVE GENERALIZED PREDICTIVE CONTROL OFSWITCHED SYSTEMS

The problem of adaptive generalized predictive control which consists of output prediction errors for a class of switched systems is studied.The switching law is determined by the output predictive errors of a finite number of subsystems.For the single subsystem and multiple subsystems cases,it is proved that the given direct algorithm of generalized predictive control guarantees the global convergence of the system.This algorithm overcomes the inherent drawbacks of the slow convergence and large transient errors for the conventional adaptive control.

Global Convergence of Adaptive Generalized Predictive Controller Based on Least Squares Algorithm

Some papers on stochastic adaptive control schemes have established convergence algorithm using a least-squares parameters. With the popular application of GPC, global convergence has become a key problem in automatic control theory. However, now global convergence of GPC has not been established for algorithms in computing a least squares iteration. A generalized model of adaptive generalized predictive control is presented. The global convergebce is also given on the basis of estimating the parameters of GPC by least squares algorithm.

Robust Design for Generalized Minimum Variance Controllers

In order to improve the robustness and noise resistance of generalized minimum valance cothrol systems, several generalizedminimum variance control schemes are synthetically analyzed. The output variance caused by stochastic noise is decomposed to two parts. One part accords with the output variance of minboum vedance control and the other is the additional term of output variance causedby the control weighting factors. At the same time, the sensitivity function of modeling error is also deduced. A new robast design method that can minimize the sensitivity and the additional part of output variance is Presented by regulating variable parameters of contollers. The simulation results of self-tuning control show the effect of this method.

Robust Continuous-time Generalized Predictive Control for Large Time-delay System

A simple delay-predictive continuous-time generalized predictive controller with filter (F-SDCGPC) is proposed. By using modified predictive output signal and cost function, the delay compensator is incorporated in the control law with observer structure, and a filter is added for enhancing robustness. The design of filter does not affect the nominal set-point response, and it is more flexible than the design of observer polynomial. The analysis and simulation results show that the F-SDCGPC has better robustness than the observer structure without filter when large time-delay error is considered.

SIMULATION STUDY OF GENERALIZED MINIMUM VARIANCE CONTROL FOR AN EXTRACTION TURBINE

In an extraction turbine, pressure of the extracted steam and rotate speed of the rotor are two important controlled quantities. The traditional linear state feedback control method is not perfect enough to control the two quantities accurately because of existence of nonlinearity and coupling. A generalized minimum variance control method is studied for an extraction turbine. Firstly, a nonlinear mathematical model of the control system about the two quantities is transformed into a linear system with two white noises. Secondly, a generalized minimum variance control law is applied to the system. A comparative simulation is done. The simulation results indicate that precision and dynamic quality of the regulating system under the new control law are both better than those under the state feedback control law.

GENERALIZED TRANSFER FUNCTION OF CONTROL SYSTEM AND AN IMPROVEMENT ON THE DECISION METHOD OF MOVEMENT STABILITY

In this paper the definitions of generalized transfer functios of control system and itscontinuity are presented.Using generalized transfer function as a tool,a set of theorems fordeciding movement stability have been constructed.Thus basing understanding of thecharacteristics of a control dynamics system on its measured procedure will simplify thedecision method of movement stability problems.

ANALYSIS FOR THE BEZOUT IDENTITY OF GENERALIZED SYSTEMS

The state space representation of the Bezout identity for generalized systems proposed by (Wang and Balas, 1989) is discussed again. A more concise way of description and proof is presented and the physical significance of the result in is also analyzed. Thus, our work is of independent interest.

Constrained predictive control based on T-S fuzzy model for nonlinear systems

A constrained generalized predictive control （GPC） algorithm based on the T-S fuzzy model is presented for the nonlinear system. First, a Takagi-Sugeno （T-S） fuzzy model based on the fuzzy cluster algorithm and the orthogonalleast square method is constructed to approach the nonlinear system. Since its consequence is linear, it can divide the nonlinear system into a number of linear or nearly linear subsystems. For this T-S fuzzy model, a GPC algorithm with input constraints is presented. This strategy takes into account all the constraints of the control signal and its increment, and does not require the calculation of the Diophantine equations. So it needs only a small computer memory and the computational speed is high. The simulation results show a good performance for the nonlinear systems.

Temperature prediction control based on least squares support vector machines

A prediction control algorithm is presented based on least squares support vector machines (LS-SVM) model for a class of complex systems with strong nonlinearity. The nonlinear off-line model of the controlled plant is built by LS-SVM with radial basis function (RBF) kernel. In the process of system running, the off-line model is linearized at each sampling instant, and the generalized prediction control (GPC) algorithm is employed to implement the prediction control for the controlled plant. The obtained algorithm is applied to a boiler temperature control system with complicated nonlinearity and large time delay. The results of the experiment verify the effectiveness and merit of the algorithm.

New predictive control algorithms based on Least Squares Support Vector Machines

Used for industrial process with different degree of nonlinearity, the two predictive control algorithms presented in this paper are based on Least Squares Support Vector Machines (LS-SVM) model. For the weakly nonlinear system, the system model is built by using LS-SVM with linear kernel function, and then the obtained linear LS-SVM model is transformed into linear input-output relation of the controlled system. However, for the strongly nonlinear system, the off-line model of the controlled system is built by using LS-SVM with Radial Basis Function (RBF) kernel. The obtained nonlinear LS-SVM model is linearized at each sampling instant of system running, after which the on-line linear input-output model of the system is built. Based on the obtained linear input-output model, the Generalized Predictive Control (GPC) algorithm is employed to implement predictive control for the controlled plant in both algorithms. The simulation results after the presented algorithms were implemented in two different industrial processes model; respectively revealed the effectiveness and merit of both algorithms.

NonliNonlinear GPC with In-place Trained RLS-SVM Model for DOC Control in a Fed-batch Bioreactor

In this study, Saccharomyces cerevisiae (baker's yeast) was produced in a fed-batch bioreactor at the optimal dissolved oxygen concentration (DOC) and growth medium temperature. However, it is very difficult to control the DOC using conventional controllers because of the poorly understood and constantly changing dynamics of the bioprocess. A generalized predictive controller (GPC) based on a nonlinear autoregressive integrated moving average exogenous (NARIMAX) model is presented to stabilize the DOC by manipulation of air flow rate. The NARIMAX model is built by an improved recursive least-squares support vector machine, which is trained by an in-place computation scheme and avoids the computation of the inverse of a large matrix and memory reallocation. The proposed nonlinear GPC algorithm requires little preliminary knowledge of the fermentation process, and directly obtains the nonlinear model in matrix form by using iterative multiple modeling instead of linearization at each sampling period. By application of an on-line bioreactor control, experimental results demonstrate the robustness, effectiveness and advantages of the new controller.