Application of Generalized Predictive Adaptive Control Algorithm in the Design of Missile Control System

To study the application of the generalized predictive adaptive control algorithm in missile control system, the algorithm is presented based on the recursive least square estimation, and a controller of the pitch channel of a missile is designed by using this algorithm. The simulations verify that the designed controller can meet the demands of the task well.

THE PRINCIPLE OF ROBUSTNESS IN GENERALIZED PREDICTIVE CONTROL

This paper deeply analyzes the closed-loop nature ofGPCin the fram ework ofinter- nalm odelcontrol(IMC) theory. A new sort ofrelation lies in the feedback structure so that robustreason can be satisfactorily explained. The resultissignificantbecause the previous con- clusions are only applied to open-loop stable plant(orm odel).

Neuro-fuzzy generalized predictive control of boiler steam temperature

Power plants are nonlinear and uncertain complex systems. Reliable control of superheated steam temperature is necessary to ensure high efficiency and high load-following capability in the operation of modem power plant. A nonlinear generalized predictive controller based on neuro-fuzzy network （NFGPC） is proposed in this paper. The proposed nonlinear controller is applied to control the superheated steam temperature of a 200MW power plant. From the experiments on the plant and the simulation of the plant, much better performance than the traditional controller is obtained,

Improved Generalized Predictive Control Algorithm with Offline and Online Identification and Its Application to Fixed Bed Reactor

An improved generalized predictive control algorithm is presented in thispaper by incorporating offline identification into online identification. Unlike the existinggeneralized predictive control algorithms, the proposed approach divides parameters of a predictivemodel into the time invariant and time-varying ones, which are treated respectively by offline andonline identification algorithms. Therefore, both the reliability and accuracy of the predictivemodel are improved. Two simulation examples of control of a fixed bed reactor show that this newalgorithm is not only reliable and stable in the case of uncertainties and abnormal disturbances,but also adaptable to slow time varying processes.

Application of generalized predictive control in networked control system

A new framework for networked control system based on Generalized Predictive Control (GPC) is proposed in this paper. Clock-driven sensors, event-driven controller, and clock-driven actuators are required in this framework. A queuing strategy is proposed to overcome the network induced delay. Without redesigning, the proposed framework enables the existing GPC controller to be used in a network environment. It also does not require clock synchronization and is only slightly affected by bad network condition such as package loss. Various experiments are designed over the real network to test the proposed approach, which verify that the proposed approach can stabilize the Networked Control System (NCS) and is robust.

A Long-Range Generalized Predictive Control Algorithm for a DFIG Based Wind Energy System

This paper presents a new Long-range generalized predictive controller in the synchronous reference frame for a wind energy system doubly-fed induction generator based. This controller uses the state space equations that consider the rotor current and voltage as state and control variables, to execute the predictive control action. Therefore, the model of the plant must be transformed into two discrete transference functions, by means of an auto-regressive moving average model, in order to attain a discrete and decoupled controller, which makes it possible to treat it as two independent single-input single-output systems instead of a magnetic coupled multiple-input multiple-output system. For achieving that, a direct power control strategy is used, based on the past and future rotor currents and voltages estimation. The algorithm evaluates the rotor current predictors for a defined prediction horizon and computes the new rotor voltages that must be injected to controlling the stator active and reactive powers. To evaluate the controller performance, some simulations were made using Matlab/Simulink. Experimental tests were carried out with a small-scale prototype assuming normal operating conditions with constant and variable wind speed profiles. Finally, some conclusions respect to the dynamic performance of this new controller are summarized.

Adaptive Cascade Generalized Predictive Control

Cascade control is one of the most popular structures for process control as it is a special architecture for dealing with disturbances. However, the drawbacks of cascade control are obvious that primary controller and secondary controller should be tuned together, which influences each other. In this paper, a new Adaptive Cascade Generalized Predictive Controller (ACGPC) is introduced. ACGPC is a method issued from GPC and the inner and outer controllers of a cascade system are replaced by one cascade generalized predictive controller, where both loops model are updated by Recursive Least Squares method. Compared with existing methods, the new method is simpler and yet more effective. It can be directly integrated into commercially available industrial auto-tuning systems. Some examples are given to illustrate the effectiveness and robustness of the proposed method.

ON THE ROBUSTNESS OF A GENERALIZED PREDICTIVE CONTROLLER

In this paper, we present a quantitative analysis of the robustness of a generalized predictive controller. The result of stability analysis shows that, under a specific bounded modelling error, the closed-loop system is BIBO stable in the presence of unmodelled dynamics.

Proportion integral-type active disturbance rejection generalized predictive control for distillation process based on grey wolf optimization parameter tuning

The high-purity distillation column system is strongly nonlinear and coupled,which makes it difficult to control.Active disturbance rejection control(ADRC)has been widely used in distillation systems,but it has limitations in controlling distillation systems with large time delays since ADRC employs ESO and feedback control law to estimate the total disturbance of the system without considering the large time delays.This paper designs a proportion integral-type active disturbance rejection generalized predictive control(PI-ADRGPC)algorithm to control the distillation column system with large time delay.It replaces the PD controller in ADRC with a proportion integral-type generalized predictive control(PI-GPC),thereby improving the performance of control systems with large time delays.Since the proposed controller has many parameters and is difficult to tune,this paper proposes to use the grey wolf optimization(GWO)to tune these parameters,whose structure can also be used by other intelligent optimization algorithms.The performance of GWO tuned PI-ADRGPC is compared with the control performance of GWO tuned ADRC method,multi-verse optimizer(MVO)tuned PI-ADRGPC and MVO tuned ADRC.The simulation results show that the proposed strategy can track reference well and has a good disturbance rejection performance.

Generalized Predictive Control with Online Least Squares Support Vector Machines

这份报纸基于能有效地处理非线性的系统的联机最少的广场支持向量机器(LS-SVM ) 建议一个实际概括预兆的控制(GPC ) 算法。在每个采样时期，算法递归地由增加新数据对并且在实时性质上从考虑删除最不重要的修改模型。删除的数据对被 lagrange 的绝对值从最后一个采样时期更多样地决定。当增加新数据对并且删除存在的时，纸给模型参数的递归的算法分别地，一个大矩阵的倒置被避免，存储器能被算法完全控制。非线性的 LS-SVM 模型在每个采样时期在 GPC 算法被使用。抵销过程的 pH 上的概括预兆的控制的实验显示出建议算法的有效性和实物。

Weighted Adaptive Generalized Predictive Control for Carding Autoleveler

In textile industry, carding process has decisive influence on produced yarn quality. From the system theoretic point of view, it is marked by stochastic disturbance, long delays, and parameter variation. So, a carding process is difficult to control with traditional control algorithms (such as PID). In this paper, a weighted adaptive generalized predictive control (GPC) law was developed to control such a process. The experimental results show that GPC autoleveller controller could greatly reduce the sliver’s standard deviation and reject disturbance.

ADAPTIVE GENERALIZED PREDICTIVE CONTROL OFSWITCHED SYSTEMS

The problem of adaptive generalized predictive control which consists of output prediction errors for a class of switched systems is studied.The switching law is determined by the output predictive errors of a finite number of subsystems.For the single subsystem and multiple subsystems cases,it is proved that the given direct algorithm of generalized predictive control guarantees the global convergence of the system.This algorithm overcomes the inherent drawbacks of the slow convergence and large transient errors for the conventional adaptive control.

Global Convergence of Adaptive Generalized Predictive Controller Based on Least Squares Algorithm

Some papers on stochastic adaptive control schemes have established convergence algorithm using a least-squares parameters. With the popular application of GPC, global convergence has become a key problem in automatic control theory. However, now global convergence of GPC has not been established for algorithms in computing a least squares iteration. A generalized model of adaptive generalized predictive control is presented. The global convergebce is also given on the basis of estimating the parameters of GPC by least squares algorithm.

SIMULATION STUDY OF GENERALIZED PREDICTIVE CONTROL FOR TURBINE POWER

A GPC (generalized predictive control) law is developed to control the powerof a turbine, after transforming the nonlinear mathematical model of the power regulation systeminto a CARIMA(controlled auto-regressive integrated moving average) form. The effect of the newcontrol law is compared with a traditional PID (proportional, integral and differential) control lawby numerical simulation. The simulation results verify the effectiveness, the correctness and theadvantage of the new control scheme.

Parameter Self - Learning of Generalized Predictive Control Using BP Neural Network

This paper describes the self—adjustment of some tuning-knobs of the generalized predictive controller(GPC).A three feedforward neural network was utilized to on line learn two key tuning-knobs of GPC,and BP algorithm was used for the training of the linking-weights of the neural network.Hence it gets rid of the difficulty of choosing these tuning-knobs manually and provides easier condition for the wide applications of GPC on industrial plants.Simulation results illustrated the effectiveness of the method.

Robust Continuous-time Generalized Predictive Control for Large Time-delay System

A simple delay-predictive continuous-time generalized predictive controller with filter (F-SDCGPC) is proposed. By using modified predictive output signal and cost function, the delay compensator is incorporated in the control law with observer structure, and a filter is added for enhancing robustness. The design of filter does not affect the nominal set-point response, and it is more flexible than the design of observer polynomial. The analysis and simulation results show that the F-SDCGPC has better robustness than the observer structure without filter when large time-delay error is considered.

Predictive control of a chaotic permanent magnet synchronous generator in a wind turbine system

This paper investigates how to address the chaos problem in a permanent magnet synchronous generator（PMSG） in a wind turbine system. Predictive control approach is proposed to suppress chaotic behavior and make operating stable;the advantage of this method is that it can only be applied to one state of the wind turbine system. The use of the genetic algorithms to estimate the optimal parameter values of the wind turbine leads to maximization of the power generation.Moreover, some simulation results are included to visualize the effectiveness and robustness of the proposed method.

2D multi-model general predictive iterative learning control for semi-batch reactor with multiple reactions

Batch to batch temperature control of a semi-batch chemical reactor with heating/cooling system was discussed in this study. Without extensive modeling investigations, a two-dimensional(2D) general predictive iterative learning control(2D-MGPILC) strategy based on the multi-model with time-varying weights was introduced for optimizing the tracking performance of desired temperature profile. This strategy was modeled based on an iterative learning control(ILC) algorithm for a 2D system and designed in the generalized predictive control(GPC) framework. Firstly, a multi-model structure with time-varying weights was developed to describe the complex operation of a general semi-batch reactor. Secondly, the 2 D-MGPILC algorithm was proposed to optimize simultaneously the dynamic performance along the time and batch axes. Finally, simulation for the controller design of a semi-batch reactor with multiple reactions was involved to demonstrate that the satisfactory performance could be achieved despite of the repetitive or non-repetitive disturbances.

Brushless DC Generator Controlled by Constrained Predictive Algorithm

The brushless DC generator controlled by a predictive algorithm is considered in this paper. It is able to develop excellent performances such as minimum Joule losses and minimum torque ripple, at the same time. The tracking characteristic of the prime-mover is mandatory for setting the reference value of the electromagnetic torque developed by the generator, by means of which the switching pattern of the AC/DC converter is determined at each sampling time interval. The above generator performances are possible under certain constrained values of reference torque and rotor speed, due to the DC-bus voltage saturation. The knowledge of these quantities are necessary for the best matching of the prime-mover with the brushless DC generator and the AC/DC converter. In this paper, these constraints are investigated in detail with the aim of highlighting the best operation of the conversion s） stem under a constant DC bus voltage.