Optimization of the Dressing Parameters in Cylindrical Grinding Based on a Generalized Utility Function

The existing studies, concerning the dressing process, focus on the major influence of the dressing conditions on the grinding response variables. However, the choice of the dressing conditions is often made, based on the experience of the qualified staff or using data from reference books. The optimal dressing parameters, which are only valid for the particular methods and dressing and grinding conditions, are also used. The paper presents a methodology for optimization of the dressing parameters in cylindrical grinding. The generalized utility function has been chosen as an optimization parameter. It is a complex indicator determining the economic, dynamic and manufacturing characteristics of the grinding process. The developed methodology is implemented for the dressing of aluminium oxide grinding wheels by using experimental diamond roller dressers with different grit sizes made of medium- and high-strength synthetic diamonds type AC32 and AC80. To solve the optimization problem, a model of the generalized utility function is created which reflects the complex impact of dressing parameters. The model is built based on the results from the conducted complex study and modeling of the grinding wheel lifetime, cutting ability, production rate and cutting forces during grinding. They are closely related to the dressing conditions （dressing speed ratio, radial in-feed of the diamond roller dresser and dress-out time）, the diamond roller dresser grit size/grinding wheel grit size ratio, the type of synthetic diamonds and the direction of dressing. Some dressing parameters are determined for which the generalized utility fimction has a maximum and which guarantee an optimum combination of the following： the lifetime and cutting ability of the abrasive wheels, the tangential cutting force magnitude and the production rate of the grinding process. The results obtained prove the possibility of control and optimization of grinding by selecting particular dressing parameters.

A cubic triboelectric generator as a self-powered orientation sensor

Recently, triboelectric generator(TEG) has attracted a lot of attention due to its high output voltage and low-cost fabrication process. Here, a novel cubic TEG box is designed, which has separated electrodes on different surfaces. Thanks to the specially designed structure, it can scavenge vibration energy from all directions. Firstly the device is investigated through finite element method(FEM) simulation. Then the device is evaluated by experiments. The measuremental results show that this device can generate an amount of 25 n C charge during once shake by charging a 10 n F capacitor. Besides, an output voltage about 100 V is obtained, which is able to directly light up several light-emitting diodes(LEDs) simultaneously. At last, the device is utilized as a self-powered orientation sensor, which shows explicit directivity. This work extends the applications of TEG for ambient vibration energy harvesting techniques and the self-powered orientation sensor.

A dynamic optical arbitrary waveform generator based on cross phase modulation

In this paper, a dynamic optical arbitrary waveform generator(OAWG) based on cross phase modulation(XPM) is proposed. According to the characteristics of XPM, the nonlinear phase shift of signal can be changed along with the pump power. The amplitude of signal can be changed by controlling the phase shift at one arm of a Mach-Zehnder interferometer(MZI) using XPM effect between signal and pump. Therefore, the phase and amplitude of the optical frequency comb(OFC) can be controlled by two pump arrays. As a result, different kinds of waveforms can be synthesized. Due to the ultrafast response of XPM, the generated waveform could be dynamically updated with an ultrafast frequency. The waveform fidelity is affected by the updating frequency.

A simplified tunable frequency interval optical frequency comb generator using a single continuous-wave laser

We propose and demonstrate a simplified and tunable frequency interval optical frequency comb(OFC) generator based on a dual-drive Mach-Zehnder modulator(DD-MZM) using a single continuous-wave(CW) laser and low-power radio frequency(RF) driven signal. A mathematical model for the scheme is established. The 21-and 29-mode OFCs with frequency interval ranging from 6 GHz to 40 GHz are obtained under DD-MZM driven by a low-power RF signal within a maximum bandwidth of 1.12 THz. The generated OFCs exhibit spectral flatnesses of less than 0.5 d B and 0.8 d B within bandwidths of 160 GHz and 400 GHz, respectively.