Metal-organic framework-based single-atom electro-/ photocatalysts: Synthesis, energy applications, and opportunities

Single-atom catalysts(SACs)have gained substantial attention because of their exceptional catalytic properties.However,the high surface energy limits their synthesis,thus creating significant challenges for further development.In the last few years,metal–organic frameworks(MOFs)have received significant consideration as ideal candidates for synthesizing SACs due to their tailorable chemistry,tunable morphologies,high porosity,and chemical/thermal stability.From this perspective,this review thoroughly summarizes the previously reported methods and possible future approaches for constructing MOF-based(MOF-derived-supported and MOF-supported)SACs.Then,MOF-based SAC's identification techniques are briefly assessed to understand their coordination environments,local electronic structures,spatial distributions,and catalytic/electrochemical reaction mechanisms.This review systematically highlights several photocatalytic and electrocatalytic applications of MOF-based SACs for energy conversion and storage,including hydrogen evolution reactions,oxygen evolution reactions,O_(2)/CO_(2)/N_(2) reduction reactions,fuel cells,and rechargeable batteries.Some light is also shed on the future development of this highly exciting field by highlighting the advantages and limitations of MOF-based SACs.

Diagnosis of the Kinetic Energy of the“21·7”Extreme Torrential Rainfall Event in Henan Province,China

An extreme torrential rain(ETR)event occurred in Henan Province,China,during 18-21 July 2021.Based on hourly rain-gauge observations and ERA5 reanalysis data,the ETR was studied from the perspective of kinetic energy(K),which can be divided into rotational wind(V_(R))kinetic energy(K_(R)),divergent wind kinetic energy(K_(D)),and the kinetic energy of the interaction between the divergent and rotational winds(K_(RD)).According to the hourly precipitation intensity variability,the ETR process was divided into an initial stage,a rapid increase stage,and maintenance stage.Results showed that the intensification and maintenance of ETR were closely related to the upper-level K,and most closely related to the upperlevel K_(R),with a correlation coefficient of up to 0.9.In particular,the peak value of hourly rainfall intensity lagged behind the K_(R) by 8 h.Furthermore,diagnosis showed that K transformation from unresolvable to resolvable scales made the ETR increase slowly.The meridional rotational wind(u_(R))and meridional gradient of the geopotential(φ)jointly determined the conversion of available potential energy(APE)to K_(R) through the barotropic process,which dominated the rapid enhancement of K_(R) and then caused the rapid increase in ETR.The transportation of K by rotational wind consumed K_(R),and basically offset the K_(R) produced by the barotropic process,which basically kept K_(R) stable at a high value,thus maintaining the ETR.

Exploration and Application Practice of Energy Conservation Theory and Method in Steel Manufacturing Process System

This article briefly discusses the theoretical basis and overall goals of energy conservation in the steel manufacturing process system.It is proposed that in the process of implementing system energy conservation,it is necessary to fully recognize and utilize the characteristics and functional advantages of the steel manufacturing process,pay more attention to energy quality,firmly grasp the overall goal of system optimization,focus on the integrated optimization of gas,steam,and waste heat systems,and propose the idea of constructing a"steel chemi-cal gas electricity heating cooling multi generation system".Based on practice,the main principles,models,and effects of implementing systematic energy conservation in steel enterprises have been proposed.

Research on Equivalent Modeling Method of AC-DC Power Networks Integrating with Renewable Energy Generation

Along with the increasing integration of renewable energy generation in AC-DC power networks,investigating the dynamic behaviors of this complex system with a proper equivalent model is significant.This paper presents an equivalent modeling method for the AC-DC power networks with doubly-fed induction generator(DFIG)based wind farms to decrease the simulation scale and computational burden.For the AC-DC power networks,the equivalent modeling strategy in accordance with the physical structure simplification is stated.Regarding the DFIG-based wind farms,the equivalent modeling based on the sequential identification of multi-machine parameters using the improved chaotic cuckoo search algorithm(ICCSA)is conducted.In light of the MATLAB simulation platform,a two-zone four-DC interconnected power grid with wind farms is built to check the efficacy of the proposed equivalentmodelingmethod.Fromthe simulation analyses and comparative validation in different algorithms and cases,the proposed method can precisely reflect the steady and dynamic performance of the demonstrated system under N-1 and N-2 fault scenarios,and it can efficiently achieve the parameter identification of the wind farms and fulfill the equivalent modeling.Consequently,the proposed approach’s effectiveness and suitability are confirmed.

Electricity Generation from Heatwaves

We chose a definition of heatwaves (HWs) that has ~4-year recurrence frequency at world hot spots. We first examined the 1940-2022 HWs climatology and trends in lifespan, severity, spatial extent, and recurrence frequency. HWs are becoming more frequent and more severe for extratropical mid- and low-latitudes. To euphemize HWs, we here propose a novel clean energy-tapping concept that utilizes the available nano-technology, micro-meteorology knowledge of temperature distribution within/without buildings, and radiative properties of earth atmosphere. The key points for a practical electricity generation scheme from HWs are defogging, insulation, and minimizing the absorption of infrared downward radiation at the cold legs of the thermoelectric generators. One sample realization is presented which, through relay with existing photovoltaic devices, provides all-day electricity supply sufficient for providing air conditioning requirement for a residence (~2000-watt throughput). The provision of power to air conditioning systems, usually imposes a significant stress on traditional city power grids during heatwaves.

Large-Scale Renewable Energy Transmission by HVDC: Challenges and Proposals

Renewable energy transmission by high-voltage direct current(HVDC)has attracted increasing attention for the development and utilization of large-scale renewable energy under the Carbon Peak and Carbon Neutrality Strategy in China.High-penetration power electronic systems(HPPESs)have gradually formed at the sending end of HVDC transmission.The operation of such systems has undergone profound changes compared with traditional power systems dominated by synchronous generators.New stability issues,such as broadband oscillation and transient over-voltage,have emerged,causing tripping accidents in large-scale renewable energy plants.The analysis methods and design principles of traditional power systems are no longer suitable for HPPESs.In this paper,the mechanisms of broadband oscillation and transient over-voltage are revealed,and analytical methods are proposed for HPPESs,including small-signal impedance analysis and electromagnetic transient simulation.Validation of the theoretical research has been accomplished through its application in several practical projects in north,northwest,and northeast region of China.Finally,suggestions for the construction and operation of the future renewable-energy-dominated power system are put forward.

Development modes analysis of renewable energy power generation in North Africa

North African countries generally have strategic demands for energy transformation and sustainable development.Renewable energy development is important to achieve this goal.Considering three typical types of renewable energies—wind,photovoltaic(PV),and concentrating solar power(CSP)—an optimal planning model is established to minimize construction costs and power curtailment losses.The levelized cost of electricity is used as an index for assessing economic feasibility.In this study,wind and PV,wind/PV/CSP,and transnational interconnection modes are designed for Morocco,Egypt,and Tunisia.The installed capacities of renewable energy power generation are planned through the time sequence production simulation method for each country.The results show that renewable energy combined with power generation,including the CSP mode,can improve reliability of the power supply and reduce the power curtailment rate.The transnational interconnection mode can help realize mutual benefits of renewable energy power,while the apportionment of electricity prices and trading mechanisms are very important and are related to economic feasibility;thus,this mode is important for the future development of renewable energy in North Africa.

Fault on-off versus strain rate and earthquakes energy

We propose that the brittle-ductile transition （BDT） controls the seismic cycle. In particular, the movements detected by space geodesy record the steady state deformation in the ductile lower crust, whereas the stick-slip behavior of the brittle upper crust is constrained by its larger friction. GPS data allow analyzing the strain rate along active plate boundaries. In all tectonic settings, we propose that earthquakes primarily occur along active fault segments characterized by relative minima of strain rate, segments which are locked or slowly creeping. We discuss regional examples where large earthquakes happened in areas of relative low strain rate. Regardless the tectonic style, the interseismic stress and strain pattern inverts during the coseismic stage. Where a dilated band formed during the interseismic stage, this will be shortened at the coseismic stage, and vice-versa what was previously shortened, it will be dilated. The interseismic energy accumulation and the coseismic expenditure rather depend on the tectonic setting （extensional, contractional, or strike-slip）. The gravitational potential energy dominates along normal faults, whereas the elastic energy prevails for thrust earthquakes and performs work against the gravity force. The energy budget in strike-slip tectonic setting is also primarily due elastic energy. Therefore, precursors may be different as a function of the tectonic setting. In this model, with a given displacement, the magnitude of an earthquake results from the coseismic slip of the deformed volume above the BDT rather than only on the fault length, and it also depends on the fault kinematics.

Wind Energy Generation and Assessment of Resources in India

The gap between energy demand and its generation is constantly widening. People have started giving more emphasis on renewable sources of energy. This paper presents the estimation of potential for wind energy generation maps based on fixed wind turbine capacity. Although wind energy has developed substantially in recent years, we have only wind speed and wind potential density maps. Our attempt here is to generate wind energy generation potential maps. Major step in achieving this goal is modeling of wind energy conversion system using TRNSYS software. The model consists of three main components namely the weather, the turbines and energy conversion parameters. The weather data are provided from the meteorological database, namely Meteonorm. The simulated output is compared with actual wind generation of wind farms. After comparing our model results with the existing wind energy generation data, we have extended to compute the wind energy generation for all locations in India. For simulation, 4691 locations are identified considering 0.25° × 0.25° interval. The energy generation simulated data are compiled and developed into maps that are useful to all wind energy developers. The data generated and presented in the form of maps are for all the 30 states of India.

The Disk-Magnet Electromagnetic Induction Applied to Thermoelectric Energy Conversions

The thermoelectric energy conversion technique by employing the Disk-Magnet Electromagnetic Induction (DM-EMI) and improved DM-EMIs is shown, and possible applications to heat engines as one of the energy harvesting technologies are also discussed. The idea is induced by integrating irreversible thermodynamical mechanism of a water drinking bird with that of a Stirling engine, resulting in thermoelectric energy generation different from conventional heat engines. The current thermoelectric energy conversion with DM-EMI can be applied to wide ranges of temperature differences. The mechanism of DM-EMI energy converter is examined in terms of axial flux magnetic lines and categorized as the axial flux generator. It is useful for practical applications to macroscopic heat engines such as wind, geothermal, thermal and nuclear power turbines and heat-dissipation lines, for supporting thermoelectric energy conversions. The technique of DM-EMI will contribute to environmental problems to maintain clean and susceptible energy as one of the energy harvesting technologies.

Nuclear energy generation rates on magnetar surfaces

Based on the new screening model, this paper discusses the influence of superstrong magnetic fields on nuclear energy generation rates on the surface of magnetars. The obtained result shows that the superstrong magnetic fields can increase the nuclear energy generation rates by many orders of magnitude. The enhancement may have a significant influence for further study of the magnetars, especially for the cooling, the x-ray luminosity observation and the evolution of the magnetars.

Energy Scaling of Terahertz Pulses Produced through Difference Frequency Generation

We study the energy scaling of terahertz (THz) emission through difference frequency generation of near-infrared pulses, and demonstrate that Gigawatt few-cycle THz transients at the central frequency of 30 THz are produced from GaSe crystal pumped by two pulses at 1.65 and 1.95 micrometers, with the high quantum yield of 28%. Our analysis indicates that the high yield of DFG originates from the largely reduced group velocity mismatch as the long-wavelength pumping pulses are employed.

Research of Thermal Energy Storage Technology in the Solar Thermodynamic Power

Recently, although renewable energy has a great development, primary source is still thermal power generation, which uses fossil fuel as the energy source. Supply and demand of fossil fuel are essential for social and economy development. However, development pattern that excessively relies on the natural source is impossible to provide a sustainable development way for us. As a result, we should combine renewable energy with new energy technology as the aim of economy. It means that it is urgent to exploit new energy. Meanwhile, the ratio of energy waste cannot be ignored. How to decrease energy waste is also significant. Construction sector costs a lot of energy, which is mainly used for heating and refrigeration. In the new energy generation technology, thermal energy can be transformed to electricity with combination of BIPV and thermal energy storage technology. Photovoltaic generation has a great progress in the building construction. As a result, the thermal energy storage technology becomes the key link in the production chain. In this paper, feasibility of applying phase-change material (PCM) in the thermal energy storage will be analyzed. And analysis results are provided with a relative mathematical model.

Renewable energy power generation projects started construction in Tibet

On March 19, the construction of a 10-MW photovoltaic power plant and a 1 000-kW new type geothermal power generation project were started by Guodian Longyuan Group in Yanbajing Town, Dangxiong County of Tibet.

A Techno-Economical Characterization of Solar PV Power Generation in Rwanda:The Role of Subsidies and Incentives

Standalone Solar PV systems have been vital in the improvement of access to energy in many countries.However,given the large cost of solar PV plants’components,in developing countries,there is a dear need for such components to be subsidised and incentivised for the consumers to afford the produced energy.Moreover,there is a need for optimal sizing of the solar PV plants taking into account the solar information,energy requirement for various activities,and economic conditions in the off-grid regions in Rwanda.This study aims to develop optimally sized solar PV plants suited to rural communities in Rwanda.Likewise,it aims at characterizing the impacts of subsidies and incentives on the profitability and affordability of solar PV plants’energy in Rwanda.In the study,we have developed a model on basis of which the plant power(peak power)and costs of energy can be predicted given the load requirements using PVSyst.The model was validated using data corrected at eight different sites.Our generalized predictive model’s results matched the results obtained using field measurement data as inputs.The models have been able to replicate with a by degree of accuracy the peak powers and the plants’costs for different loads and were used to evaluate the economic viability of solar PV plants in Rwanda.It was found that with incentives and subsidies of 20%,the solar PV systems’costs,the Levelised Cost of Energy would drop from a maximum of 0.098 Euro to a minimum of 0.072 Euro,the payback period was reduced from a maximum of 7.5 years to a minimum of 6.0 years while the return on investments was seen to vary between 425.72 and 615.32 per cent over the plants’lifetime of 25 years.Overall our findings underscore the importance of government subsidies and incentives for solar PV energy generation projects to be significantly profitable.

Sensitive humidity sensor based on moisture-driven energy generation

The emergence of novel self-powered humidity sensors has attracted considerable attention in the fields of smart electronic devices and personal healthcare.Herein,self-powered humidity sensors have been fabricated using a moisture-driven energy generation(MEG)device based on asymmetric tubular graphitic carbon nitride(g-CN)films prepared on anodized aluminum(AAO)template.At a relative humidity(RH)of 96%,the MEG device can provide an open-circuit voltage of 0.47 V and a short-circuit current of 3.51μA,with a maximum output power of 0.08μW.With inherent self-powered ability and humidity response via current variation,an extraordinary response of 1.78×106%(41%-96%RH)can be gained from the MEG device.The possible power generation mechanism is that g-CN/AAO heterostructure can form ion gradient and diffusion under the action of moisture to convert chemical potential into electrical potential,evoking a connaturally sensitive response to humidity.Self-powered respiration monitoring device based on the sensor is designed to monitor human movement(sitting,warming up,and running)and sleep status(normal,snoring,and apnea),maintaining excellent stability during cumulative 12-h respiration monitoring.This self-powered humidity sensing technology has promising potential for extensive integration into smart electronic and round-the-clock health monitoring devices.

Control and Stability of Large-scale Power System with Highly Distributed Renewable Energy Generation:Viewpoints from Six Aspects

Power systems are moving toward a low-carbon or carbon-neutral future where high penetration of renewables is expected.With conventional fossil-fueled synchronous generators in the transmission network being replaced by renewable energy generation which is highly distributed across the entire grid,new challenges are emerging to the control and stability of large-scale power systems.New analysis and control methods are needed for power systems to cope with the ongoing transformation.In the CSEE JPES forum,six leading experts were invited to deliver keynote speeches,and the participating researchers and professionals had extensive exchanges and discussions on the control and stability of power systems.Specifically,potential changes and challenges of power systems with high penetration of renewable energy generation were introduced and explained,and advanced control methods were proposed and analyzed for the transient stability enhancement of power grids.

Proposal for Offshore Wind Farm with Triangle-Coupled Movable Parallelogram Buoyancy Structure for the High Seas

We are responsible for providing energy and food resources for our next generation.After more than 20 years of research,the author has confirmed that the VAWT with flip-up mechanism can maintain rotation without the brake,even in strong winds.Experiments have shown that the triangularly coupled movable parallelogram buoyancy structure makes it easy to maintain the verticality of the wind turbine tower even under large waves.Furthermore,as a result of studying the connection between the HAWT(horizontal axis wind turbine)and the movable parallelogram buoyancy structure of the triangular connection,the feasibility was confirmed.The only way for all people in the world to secure energy and food fairly is to look for the remaining areas such as the high seas.The author would like to propose the use of the high seas to combat global hunger,which is likely to be a global problem in the future.

Switched-capacitor Based Seven-level Boost Inverter with a Reduced Number of Devices

The conventional multilevel inverters(MLIs)have the disadvantages of numerous devices,incapacity of boost,unbalance for capacitor’s voltage,high complexity for control,and etc.Motivated by this issue,a seven-level boost inverter(7LBI)based on a switched capacitor is presented for singlephase applications in this paper.The proposed 7LBI using only seven transistors can achieve seven output levels,1.5 voltage gain,and natural balance of capacitors’voltages without sensors or other auxiliary methods,which illustrates its suitability for the applications of renewable energy generation.The configuration of topology and operating principles are illustrated in detail.The natural balance of capacitors and capacitance calculations are deduced as well.Moreover,the comparative study is conducted for different types of MLIs.The results illustrate the merits of the proposed 7LBI with respect to reduced devices,lower voltage stress,and less power loss.Finally,a simulation for the proposed 7LBI with PWM modulation is realized based on the theoretical analysis;an experimental prototype is also implemented,verifying multilevel output,boost ability,natural balance for switched capacitors,and performance of transient response.

Overview of Energy Storage in Renewable Energy Power Fluctuation Mitigation

The integration of renewable energy,such as PV and wind power,has exerted great impacts on the power system with its rapid development.If the corresponding energy storage system is configured,the power system could be able to hold a higher proportion of renewable energy.Focusing on energy storage application for the output fluctuation mitigation of renewable energy,this paper first analyses the reason for renewable energy power fluctuation mitigation from the four aspects of frequency,unit ramp,low frequency oscillation and cascading failure.In addition,the fluctuation rate standard of grid-connected renewable energy,the energy storage type and the mitigation topology are introduced.Then a summary and analysis on mitigation strategy and hybrid energy storage allocation strategy are presented.Finally,the demonstration application and development trend of energy storage are analyzed to provide reference for the promotion of energy storage in renewable energy.