The Jiadi and Damaidi gold deposits in southwest Guizhou Province are the largest basalt-hosted Carlintype gold deposits recently discovered in China.This study uses the Tescan Integrated Mineral Analyzer,supported by...The Jiadi and Damaidi gold deposits in southwest Guizhou Province are the largest basalt-hosted Carlintype gold deposits recently discovered in China.This study uses the Tescan Integrated Mineral Analyzer,supported by detailed field investigations,regional geological data,and extensive sample collections,including mineralized ore,altered wall rock,and unaltered basalt samples,for orebearing and geochemical analyses.Comparative analysis between altered and unaltered basalt samples revealed a mineral assemblage of sericite,quartz,and pyrite.This mineral composition forms through the hydrothermal alteration of unaltered basalt,originally containing feldspar,pyroxene,and ilmenite.The wall rock primarily features sericite,quartz,and hematite.During the alteration process,major,trace,and rare earth elements notably migrate.In the Jiadi deposit,K_(2)O,Rb,Au,and REE significantly increase,while Na_(2)O,CaO,MgO,and MnO decrease.SiO_(2),Al_(2)O_(3),and Fe_(2)O_(3)levels remain relatively stable.In the Damaidi deposit,K_(2)O,Rb,and Au enrich,contrasting with the depletion of Na_(2)O,CaO,MgO,and MnO,while SiO_(2),Fe_(2)O_(3),Al_(2)O_(3),TiO_(2),and REE show no significant changes.In the wall rock,TiO_(2),Al_(2)O_(3),K_(2)O,and REE increase,while Na_(2)O,CaO,MgO,and MnO decrease;SiO_(2)and Fe_(2)O_(3)content remains unchanged.The mineralization process likely originated from mid-to low-temperature,reductive magmatic hydrothermal fluids rich in CO_(2),CH_(4),N_(2),H^(+),S^(2-),HS^(-),H_(3)AsO_(3),and[Au(HS_(2)]^(-).These fluids migrated to tectonically weak zones in the Lianhuashan area,where Emeishan basalts are present.They reacted with Fe-bearing minerals in the basalt,such as ferro-hornblende and ilmenite,forming pyrite,arsenic-bearing pyrite,and arsenopyrite,thus enriching Au in these minerals.Additionally,K^(+)and H^(+)in the fluid reacted with plagioclase in the basalt,forming sericite and quartz.As the fluid entered the wall rock from structural weak zones,its oxidation increased,leading to the complete or partial reaction of Fe-bearing minerals in the wall rock,resulting in the formation of hematite or magnetite.This mineralization process is similar to that observed in carbonate-hosted Carlin-type gold deposits in southwest Guizhou,with the primary distinction being the iron source.In carbonate deposits,iron originates from ferridolomite within the wall rock,while in basalt-hosted deposits,it derives from ferripyroxene and ilmenite.展开更多
The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization origi...The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.展开更多
The Ain El Bey abandoned mine, in North-West Tunisia, fits into the geodynamic context of the European and African plate boundary. Ore deposit corresponds to veins and breccia of multiphase Cu–Fe-rich mineralization ...The Ain El Bey abandoned mine, in North-West Tunisia, fits into the geodynamic context of the European and African plate boundary. Ore deposit corresponds to veins and breccia of multiphase Cu–Fe-rich mineralization related to various hydrothermal fluid circulations. Petromineralogical studies indicate a rich mineral paragenesis with a minimum of seven mineralization phases and, at least, six pyrite generations. As is also the case for galena and native silver, native gold is observed for the first time as inclusion in quartz which opens up, thus, new perspectives for prospecting and evaluating the potential for noble metals associated with the mineralization. Scanning Electron Microscope--Energy Dispersive Spectroscopy and Transmission electron microscopy analyses show, in addition, a large incorporation of trace elements, including Ag and Au, in mineral structures such as fahlores(tetrahedrite-tennantite) and chalcopyrite ones. The mineral/mineral associations, used as geothermometers, gave estimated temperatures for the mineralizing fluids varying from 254 to 330 ℃ for phase Ⅲ, from 254 to 350 ℃ for phase Ⅳ, and from 200 to 300 ℃ for phases Ⅴ and Ⅵ. The seventh and last identified mineralization phase, marked by a deposit of native gold, reflects a drop in the mineralizing fluid’s temperature(< 200 ℃) compatible with boiling conditions. Such results open up perspectives for the development of precious metal research and the revaluation of the Cu–Fe ore deposit at the Ain El Bey abandoned mine, as well as at the surrounding areas fitting in the geodynamic framework of the Africa-Europe plate boundary.展开更多
The Yangla Cu skarn deposit is located in the central part of the Jinshajiang Suture Zone,southwest China,with a total reserve of 150 Mt Cu@1.03%.The newly discovered antimony orebodies at the depth of Yangla are stri...The Yangla Cu skarn deposit is located in the central part of the Jinshajiang Suture Zone,southwest China,with a total reserve of 150 Mt Cu@1.03%.The newly discovered antimony orebodies at the depth of Yangla are strictly controlled by the stratum,structure,and lithology,which are lenticular and vein-like within the marble fracture zone,which can provide a window into multistage miner-alization and ore genesis at Yangla.Mineralization can be divided into three types,Cu–Pb–Zn(skarn)pyrite,galena,and sphalerite,Cu(porphyry)chalcopyrite and pyrite,and Sb(hydrothermal)stibnite and pyrite.The mineral assem-blages were stibnite+pyrite+calcite+quartz±minor scheelite in antimony ores.This study presents quantitative measurements of the trace element compositions of pyrite and stibnite from the Yangla antimony ores.Analysis of pyrite with electron probe microanalysis(EPMA)showed enrichment in Co,Ni,Sb,As,and Mo,and deficit in its S and Fe contents when compared to the stoichiometric con-centrations of S and Fe in pyrite.The Sb-related pyrite may belong to sedimentary-reworked genesis and may be modi-fied by hydrothermalfluids,thereby presenting a certain dif-ference(i.e.,crystal morphology,texture,and chemical com-position)compared to the skarn and porphyry Cu-related pyrite in the Yangla Cu skarn deposit.Analysis of stibnite with EPMA and inductively coupled plasma-mass spectrom-etry showed enrichment in As,Pb,Sn,Pb,Cu,and Zn,and presented much higher Sb contents and slightly lower S con-tents when compared to the stoichiometric concentrations of Sb and S in stibnite.Statistical analysis of the stibnite trace elements showed correlations for the elemental pairs Cu–Pb,As–Sb,and Sn–Pb,and the coupled substitution equations Sb^(3+)↔Cu^(+)+Pb^(2+),Sb^(3+)↔As^(3+),and Sn^(2+)↔Pb^(2+)may be the major factors governed the incorporating Cu,Pb,As and Sn within the stibnite.Moreover,this study preliminary shows that the antimony mineralization may belong to a car-bonate replacement hydrothermal genesis at Yangla.展开更多
Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-di...Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.展开更多
The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics ...The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.展开更多
Porphyry Cu(Mo-Au)deposit is one of the most important types of copper deposit and usually formed under magmatic arc-related settings,whilst the Mujicun porphyry Cu-Mo deposit in North China Craton uncommonly generate...Porphyry Cu(Mo-Au)deposit is one of the most important types of copper deposit and usually formed under magmatic arc-related settings,whilst the Mujicun porphyry Cu-Mo deposit in North China Craton uncommonly generated within intra-continental settings.Although previous studies have focused on the age,origin and ore genesis of the Mujicun deposit,the ore-forming age,magma source and tectonic evolution remain controversial.Here,this study targeted rutile(TiO_(2))in the ore-hosting diorite porphyry from the Mujicun Cu-Mo deposit to conduct in situ U-Pb dating and trace element composition studies,with major views to determine the timing and magma evolution and to provide new insights into porphyry Cu-Mo metallogeny.Rutile trace element data show flat-like REE patterns characterized by relatively enrichment LREEs and depleted HREEs,which could be identified as magmatic rutile.Rutile U-Pb dating yields lower intercept ages of 139.3–138.4 Ma,interpreted as post magmatic cooling timing below about 500℃,which are consistent or slightly postdate with the published zircon U-Pb ages of diorite porphyry(144.1–141.7 Ma)and skarn(146.2 Ma;139.9 Ma)as well as the molybdenite Re-Os ages of molybdenum ores(144.8–140.0 Ma).Given that the overlap between the closure temperature of rutile U-Pb system and ore-forming temperature of the Mujicun deposit,this study suggests that the ore-forming ages of the Mujicun deposit can be constrained at 139.3–138.4 Ma,with temporal links to the late large-scale granitic magmatism at 138–126 Ma in the Taihang Orogen.Based on the Mg and Al contents in rutile,the magma of ore-hosting diorite porphyry was suggested to be derived from crust-mantle mixing components.In conjunction with previous studies in Taihang Orogen,this study proposes that the far-field effect and the rollback of the subducting Paleo-Pacific slab triggered lithospheric extension,asthenosphere upwelling,crust-mantle interaction and thermo-mechanical erosion,which jointly facilitated the formation of dioritic magmas during the Early Cretaceous.Subsequently,the dioritic magmas carrying crust-mantle mixing metallic materials were emplaced and precipitated at shallow positions along NNE-trending ore-controlling faults,eventually resulting in the formation of the Mujicun Cu-Mo deposit within an intracontinental extensional setting.展开更多
The Hongqiling large nickel-copper-cobalt deposit(hereafter referred to as the Hongqiling deposit),a typical mafic-ultramafic copper-nickel deposit in China,boasts proven Ni(Ni)resources of approximately 22×10^(4...The Hongqiling large nickel-copper-cobalt deposit(hereafter referred to as the Hongqiling deposit),a typical mafic-ultramafic copper-nickel deposit in China,boasts proven Ni(Ni)resources of approximately 22×10^(4)t,associated copper resources of 2×10^(4)t,and associated cobalt(Co)resources of 0.5×10^(4)t,with Ni reserves ranking 10th among China's magmatic nickel deposits.Geotectonically,the Hongqiling deposit is situated in the superimposed zone between the Xing'an-Mongolian orogenic belt and the circum-Western Pacific's active continental margin belt.Its ore-bearing plutons occur within the metamorphic rocks of the Ordovician Hulan Group,with the emplacement of plutons and the locations of orebodies governed by the deep-seated Huifahe fault and its secondary NW-trending Fujia-Hejiagou-Beixinglong-Changsheng fault zone.In the deposit,the rock assemblages of ore-bearing plutons predominantly encompass gabbro-pyroxenite-olivine pyroxenite-pyroxene peridotite(pluton No.1)and norite-orthopyroxenite-harzburgite(pluton No.7),with ore-bearing lithofacies consisting primarily of olivine pyroxenite and pyroxenite facies.The Hongqiling deposit hosts stratoid,overhanging lentoid,veined,and pure-sulfide veined orebodies.Its ores principally contain metallic minerals including pyrrhotite,pentlandite,chalcopyrite,violarite,and pyrite.Despite unidentified magma sources of ore-bearing mafic-ultramafic rocks,it is roughly accepted that the magmatic evolution in the Hongqiling deposit primarily involved fractional crystallization and crustal contamination.The ore-forming materials were primarily derived from the upper mantle,mixed with minor crustal materials.The ore-bearing mafic-ultramafic rocks in the deposit,primarily emplaced during the Indosinian(208-239 Ma),were formed in an intense extension setting followed by the collisional orogeny between the North China Plate and the Songnen-Zhangguangcai Range Block during the Middle-Late Triassic.From the perspective of the metallogenic geological setting,surrounding rocks,ore-controlling structures,and rock assemblages,this study identified one favorable condition and seven significant indicators for prospecting for Hongqiling-type nickel deposits and developed a prospecting model of the Hongqiling deposit.These serve as valuable references for exploring similar nickel deposits in the region,as well as the deep parts and margins of the Hongqiling deposit.展开更多
Previous studies have obtained some petrogenetic and metallogenic chronological data with SHRIMP (sensitive high-resolution ion microprobe) zircon U-Pb, zircon LA-ICPMS (laser-ablation-inductively coupled plasma ma...Previous studies have obtained some petrogenetic and metallogenic chronological data with SHRIMP (sensitive high-resolution ion microprobe) zircon U-Pb, zircon LA-ICPMS (laser-ablation-inductively coupled plasma mass spectroscopy) U-Pb, molybdenite Re-Os isochron and muscovite Ar-Ar methods in southern Jiangxi Province and its adjacent areas. Based on these, the purpose of this paper is to study the petrogenetic and metallogenic ages and their time gap for different genetic types of W-Sn deposits, and thus to research their numerous episodes, zonal arrangement and their geodynamic background. The result shows that the large-scale W-Sn mineralization in southern Jiangxi Province occurred in the middle to late Jurassic (170-150 Ma), the skarn W-Sn-polymetallic deposits formed much earlier (170-161 Ma), and all of the wolframite-quartz vein type, greisen type, altered granite type and fractured zone type tungsten deposits formed in the late Jurassic (160-150 Ma). In one ore field or ore district, greisen type tungsten deposits formed earlier than quartz vein type ones hosted in the endoor exo-contact zone; and quartz vein type hosted in the endocontact zone formed earlier than that of exocontact zone. There is no significant time difference between tungstentin mineralization and its intimately associated parent granite emplacement (1-6 Ma). They all formed in the same rock-forming and ore-forming system and under the same geodynamic setting. Regionally, rock-forming and ore-forming processes of the W-Sn deposits in the Nanling region (include southern Jiangxi Province, southern Hunan Province, northern Guangdong Province and eastern Guangxi Zhuang Autonomous Region) exhibit numerous episodes. The mineralization in the Nanling region mainly occurred at (240-210) Ma, (170-150) Ma and (130-90) Ma. The tungsten-tin deposits in this region are centered by the largest scale in southern Jiangxi Province and southern Hunan Province, and become small in the east, west, south and north directions. This displays a zonal arrangement and temporal and spatial distribution regularity. Integrated with the latest research results, it is concluded that the W-Sn mineralization in southern Jiangxi Province and its adjacent areas corresponds to the second large-scale mineralization in South China. The Indosinian W-Sn mineralization formed under the extensional tectonic regime between collisional compressional stages, while the Yanshanian large-scale petrogenetic and metallogenic processes occurred in the Jurassic intraplate extensional geodynamic setting of lithosphere extension.展开更多
The Junggar orogen, Xinjiang, China, is an important part of the Ural-Mongolian orogen.The collisional orogenesis in this region occurred primarily in the Carboniferous and Permianwith an evolutional process of early ...The Junggar orogen, Xinjiang, China, is an important part of the Ural-Mongolian orogen.The collisional orogenesis in this region occurred primarily in the Carboniferous and Permianwith an evolutional process of early compression and late extension. Mineralization of gold andother metals in the Junggar orogen occurred mainly in the Permian and in a few cases in theLate Carboniferous. The deposits are largely distributed in areas where collisional orogenesiswas intensive and formed in a transitional stage from compression to extension. Therefore, goldmineralization in the Junggar orogen is fully consistent with the collisional orogenesis in time,space and geodynamic setting. This indicates that the mineral deposit model of collisionalorogenesis is applicable to prospecting and study of ore deposits in the Junggar orogen.Furthermore, the factual distribution of gold and other deposits in this region is just the same asthe collisional orogenic model presents.展开更多
The Gejiu tin polymetallic deposits are located in the southeastern part of Yunnan Province in China. A detailed electronic microprobe study has been carried out to document geochemical compositions of tourmalines fro...The Gejiu tin polymetallic deposits are located in the southeastern part of Yunnan Province in China. A detailed electronic microprobe study has been carried out to document geochemical compositions of tourmalines from the deposits. The results indicate a systematic change of mineral geochemical compositions, which might be used as a mineral geochemical tracer for post-magmatic hydrothermal fluid, basin fluid and their mixture. The tourmalines from granite are schori with Fe/ (Fe+Mg) ratios of 0.912-1.00 and Na/(Na+Ca) ratios of 0.892-0.981. Tourmalines as an inclusion in quartz from the ore bodies are dravite with Fe/(Fe+Mg) ratios of 0.212-0.519 and Na/(Na+Ca) ratios of 0.786--0.997. Tourmalines from the country rocks are dravite with Fe/(Fe+Mg) ratios of 0.313--0.337 and Na/(Na+Ca) ratio of 0.599-0.723. Tourmalines from cassiterite-tourmaline veins that occur in crannies within the country rocks show distinct optical zoning with alternate occurrence of dravite and schorl, Fe/(Fe+Mg)=0.374-0.843, Na/(Na+Ca)=0.538-0.987. It suggests that schorl in granite and dravite in carbonatite are related to magmatic fluid and basin fluid respectively. When magmatic fluid rose up and entered into crannies of the country rocks, consisting mainly of carbonatite, basin fluid would be constantly added to the magmatic fluid. The two types of fluid were mixed in structural crannies of the sedimentary basin accompanied with periodic geochemical oscillations to form material records in chemical composition zonings of tourmalines.展开更多
1 Introduction PCDs are generated in continental arcs in response to plate converging processes(subduction and collision)(Hou et al.,2009;Richards,2013).It is generally accepted that the formation of PCDs is associate...1 Introduction PCDs are generated in continental arcs in response to plate converging processes(subduction and collision)(Hou et al.,2009;Richards,2013).It is generally accepted that the formation of PCDs is associated with igneous activities either originating from lower crust or upper mantle,with contributions of crusts during the evolution of continental lithosphere.展开更多
The self-similar is a common phenomena arising in the field of geology. It has been shown that geochemical element data, mineral deposits, and spacial distribution conform to a fractal structure. A fractal distributio...The self-similar is a common phenomena arising in the field of geology. It has been shown that geochemical element data, mineral deposits, and spacial distribution conform to a fractal structure. A fractal distribution requires that the number of objects larger than a specified size have a power-law dependence on size. This paper shows that a number of distributions, including power-function, Pareto, lognormal, and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. The summation method is developed on the basis of fractal models to determine thresholds for Au data in Shandong Province, China. The anomalous area is enclosed by contours which have contour values greater than or equal to threshold (200 × 10^- 9) and contains known large-sized and super large-sized gold mineral deposits.展开更多
The Jiapigou gold deposits are typical vein type deposits associated withArchaean greenstone belts in China. According to the crosscutting relationships between dykesand auriferous veins, single hydrothermal zircon U-...The Jiapigou gold deposits are typical vein type deposits associated withArchaean greenstone belts in China. According to the crosscutting relationships between dykesand auriferous veins, single hydrothermal zircon U-Pb dating and quartz K-Ar,^(40)Ar-^(39)Ar andRb-Sr datings, the main mineralization stage of the Jiapigou deposit has been determined to be2469-2475 Ma, while mineralization superimposition on the gold deposit occurred in1800-2000 Ma and 130-272 Ma. They form a mineralization framework of one oldermetallogenic epoch (Late Archaean-Early Proterozoic) and one younger metallogenic epoch(Mesozoic) of gold deposits in Archaean greenstone belts in China.展开更多
Based on palaeomagnetic studies of the Precambrian gold deposits in the Xiong'ershan area, Henan Province, the authors infer that the ore-forming processes of the Beiling alteration-type gold ore deposit and the D...Based on palaeomagnetic studies of the Precambrian gold deposits in the Xiong'ershan area, Henan Province, the authors infer that the ore-forming processes of the Beiling alteration-type gold ore deposit and the Dianfang breccia-type gold ore deposit started in the Proterozoic, and was superimposed by later mineralization, whereas the mineralization age of the Jiguanshan quartz- vein type gold ore deposit is Yanshanian.展开更多
Discovery rates for all metals, including gold, are declining, the cost per significant discovery is increasing sharply, and the economic situation of the industry is one of low base rate. The current hierarchical str...Discovery rates for all metals, including gold, are declining, the cost per significant discovery is increasing sharply, and the economic situation of the industry is one of low base rate. The current hierarchical structure of the exploration and mining industry makes this situation difficult to redress. Economic geologists can do little to influence the required changes to the overall structure and philosophy of an industry driven by business rather than geological principles, However, it should be possible to follow the lead of the oil industry and improve the success rate of greenfield exploration, necessary for the next group of lower-exploration-spend significant mineral deposit discoveries. Here we promote the concept that mineral explorers need to carefully consider the scale at which their exploration targets are viewed. It is necessary to carefully assess the potential of drill targets in terms of terrane to province to district scale, rather than deposit scale, where most current economic geology research and conceptual thinking is concentrated. If orogenic, IRGD, Carlin-style and IOCG gold-rich systems are viewed at the deposit scale, they appear quite different in terms of conventionally adop- ted research parameters. However, recent models for these deposit styles show increasingly similar source-region parameters when viewed at the lithosphere scale, suggesting common tectonic settings. It is only by assessing individual targets in their tectonic context that they can be more reliably ranked in terms of potential to provide a significant drill discovery. Targets adjacent to craton margins, other lithosphere boundaries, and suture zones are clearly favoured for all of these gold deposit styles, and such exploration could lead to incidental discovery of major deposits of other metals sited along the same tectonic boundaries.展开更多
The discovery of new-type ore deposits, an important approach to guarantee the mineral resources supply in the 21st century, often brings about a gigantic increase in the mineral resources reserves. The analysis of mi...The discovery of new-type ore deposits, an important approach to guarantee the mineral resources supply in the 21st century, often brings about a gigantic increase in the mineral resources reserves. The analysis of mineralization system is of great importance to the discovery of new type ore deposits. ① The understanding of the relationship among various ore deposit types within a mineralization system in a region can help us to locate the unknown ore deposit types from the known ore deposit types, evidence that has been proved in the mineral prospecting history of ore belts in the middle and lower reaches of the Yangtze River, China. ② The understanding of the spatial structure of a mineralization system, especially of the vertical zonation, is helpful for the discovery of the concealed ore deposit types. ③ Clarifying the temporal structure of a mineralization system, including the iteration relationship between the mineral deposit types in the mineralization, leads to the location of the missing mineralization chains from the known mineralization chains (mineral deposit type), a method often proved to be effective in the magmatic hydrothermal mineralization system.④ Clarifying the factors restraining the diversity of mineral deposit types in mineralization system leads to the discovery of the potential of new type mineral deposits in relevant region. ⑤ Studying new mineralization setting and new ore forming processes leads to discovery of new type mineral deposit. More probabilities of discovery of new type mineral deposits are present in biogenic mineralization system, deep sea mineralization system, low temperature mineralization system, tectonic mineralization system and superimposed mineralization system.展开更多
A reasonable classification of deposits holds great significance for identifying prospecting targets and deploying exploration. The world ’s keen demand for lithium resources has expedited the discovery of numerous n...A reasonable classification of deposits holds great significance for identifying prospecting targets and deploying exploration. The world ’s keen demand for lithium resources has expedited the discovery of numerous novel lithium resources. Given the presence of varied classification criteria for lithium resources presently, this study further ascertained and classified the lithium resources according to their occurrence modes, obtaining 10 types and 5 subtypes of lithium deposits(resources) based on endogenetic and exogenetic factors. As indicated by surveys of Cenozoic exogenetic lithium deposits in China and abroad,the formation and distribution of the deposits are primarily determined by plate collision zones, their primary material sources are linked to the anatectic magmas in the deep oceanic crust, and they were formed primarily during the Miocene and Late Paleogene. The researchers ascertained that these deposits,especially those of the salt lake, geothermal, and volcanic deposit types, are formed by unique slightly acidic magmas, tend to migrate and accumulate toward low-lying areas, and display supernormal enrichment. However, the material sources of lithium deposits(resources) of the Neopaleozoic clay subtype and the deep brine type are yet to be further identified. Given the various types and complex origins of lithium deposits(resources), which were formed due to the interactions of multiple spheres, it is recommended that the mineralization of exogenetic lithium deposits(resources) be investigated by integrating tectono-geochemistry, paleoatmospheric circulation, and salinology. So far, industrialized lithium extraction is primarily achieved in lithium deposits of the salt lake, clay, and hard rock types. The lithium extraction employs different processes, with lithium extraction from salt lake-type lithium deposits proving the most energy-saving and cost-effective.展开更多
China is the third largest country in the world, with a land area of about 9.6 million km2. It is endowed with abundant mineral resources, and the metal mining activity can be traced back to ca. 8000 years ago. Howeve...China is the third largest country in the world, with a land area of about 9.6 million km2. It is endowed with abundant mineral resources, and the metal mining activity can be traced back to ca. 8000 years ago. However, due to language barrier, little has been known about the geology and tectonics to the outside world until 1980s. In the last three decades, a great deal of knowledge has been gained, enhanced by a vigorous cooperation between Chinese and Western geologists. Research papers about geological, geochemical, and geochronological features of mineral deposits of China are widely published and cited in international journals. A comprehen- sive and comprehensible English literature that summarises the features of mineral deposits in China, however, is still lacking.展开更多
Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascen...Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascend and are injected into the present locations once ormultiple times, thus forming ore deposits. The above-mentioned mineralizing process is knownas deep-seated magmatic liquation-injection mineralization. The volume of the barren magma isgenerally much larger than those of the ore-bearing magma, ore-rich magma and ore magma. Inthe ascending process, most of the barren magma intrudes into different locations or outpoursonto the ground surface, forming intrusions or lava flows. The rest barren magma, ore-bearingmagma, ore-rich magma and ore magma may either multiple times inject into the same space inwhich rocks and ores are formed or separately inject into different spaces in which rocks and oresare formed. The intrusions containing such deep-seated magmatic liquation-injection depositshave a much smaller volume, greater ore potential and higher ore grade than that of in-situmagmatic liquation deposits. Consequently this mineralizing process results in the formation oflarge deposits in small intrusions.展开更多
基金funded by the Talent Team Program of Science and Technology Foundation of Guizhou Province(CXTD[2021]007)the Key Project of Natural Science Basic Research Program of Shannxi Province(2023-JC-ZD-16)+4 种基金the National Natural Science Fund of China(U1812402)the National Natural Science Fund of China(41962008)the National Key Research and Development Program of China“Exploration and Exploitation of Deep Earth Resources”(2017YFC0601500)the Guizhou Province Graduate Research Fund(YJSCXJH[2020]095)the public welfare and fundamental project Fund of Guizhou Province(520000214 TLCOG7DGTNRG)。
文摘The Jiadi and Damaidi gold deposits in southwest Guizhou Province are the largest basalt-hosted Carlintype gold deposits recently discovered in China.This study uses the Tescan Integrated Mineral Analyzer,supported by detailed field investigations,regional geological data,and extensive sample collections,including mineralized ore,altered wall rock,and unaltered basalt samples,for orebearing and geochemical analyses.Comparative analysis between altered and unaltered basalt samples revealed a mineral assemblage of sericite,quartz,and pyrite.This mineral composition forms through the hydrothermal alteration of unaltered basalt,originally containing feldspar,pyroxene,and ilmenite.The wall rock primarily features sericite,quartz,and hematite.During the alteration process,major,trace,and rare earth elements notably migrate.In the Jiadi deposit,K_(2)O,Rb,Au,and REE significantly increase,while Na_(2)O,CaO,MgO,and MnO decrease.SiO_(2),Al_(2)O_(3),and Fe_(2)O_(3)levels remain relatively stable.In the Damaidi deposit,K_(2)O,Rb,and Au enrich,contrasting with the depletion of Na_(2)O,CaO,MgO,and MnO,while SiO_(2),Fe_(2)O_(3),Al_(2)O_(3),TiO_(2),and REE show no significant changes.In the wall rock,TiO_(2),Al_(2)O_(3),K_(2)O,and REE increase,while Na_(2)O,CaO,MgO,and MnO decrease;SiO_(2)and Fe_(2)O_(3)content remains unchanged.The mineralization process likely originated from mid-to low-temperature,reductive magmatic hydrothermal fluids rich in CO_(2),CH_(4),N_(2),H^(+),S^(2-),HS^(-),H_(3)AsO_(3),and[Au(HS_(2)]^(-).These fluids migrated to tectonically weak zones in the Lianhuashan area,where Emeishan basalts are present.They reacted with Fe-bearing minerals in the basalt,such as ferro-hornblende and ilmenite,forming pyrite,arsenic-bearing pyrite,and arsenopyrite,thus enriching Au in these minerals.Additionally,K^(+)and H^(+)in the fluid reacted with plagioclase in the basalt,forming sericite and quartz.As the fluid entered the wall rock from structural weak zones,its oxidation increased,leading to the complete or partial reaction of Fe-bearing minerals in the wall rock,resulting in the formation of hematite or magnetite.This mineralization process is similar to that observed in carbonate-hosted Carlin-type gold deposits in southwest Guizhou,with the primary distinction being the iron source.In carbonate deposits,iron originates from ferridolomite within the wall rock,while in basalt-hosted deposits,it derives from ferripyroxene and ilmenite.
基金financially supported by the project of the China Geological Survey(DD20230292,DD20242591)。
文摘The Dongping deposit is the largest alkalic-hosted gold deposit in China containing>100 t of Au.This paper presents a new understanding for Dongping ore system,based on the previous studies.The mineralization originally occurred at 400-380 Ma,simultaneous with emplacement of the Shuiquangou alkaline complex,and was overprinted by the hydrothermal activity in the Yanshanian.Isotope compositions of ores indicate metals of the deposit are mainly provided by the Shuiquangou complex.Ore-forming fluids are characterized by increasing oxygen fugacity and decreasing sulfur fugacity,while tellurium fugacity increased in the Stage II-2 and decreased in Stage II-3.These systematic changes are closely related to the processes of mineral precipitation and fluid evolution.Sulfide precipitation from Stage Ⅰ to Stage Ⅱ was triggered by fluid boiling,which leads to the precipitation of Pb-Bi-Te,due to decrement of sulfur fugacity.Condensation of gas phase containing high concentration of H_2Te leads to precipitation of Te-Au-Ag minerals and native tellurium.Based on these hypotheses,this paper present a polyphase metallogenic model as follow.During the Devonian,fluids were released from alkaline magmas,which carried ore-forming materials form the surrounding rocks and precipitate the early ores.During the Jurassic-Cretaceous,fluorine-rich fluids exsolved from highly factionated Shangshuiquan granite,which extracted and concentrated Au from the Shuiquangou complex and the Sanggan Group metamorphic rocks,and finally formed the Dongping gold deposit.
基金funded by the “Laboratoire de Recherche Ressources, Matériaux et Ecosystémes”, University of Carthage 7021 Zarzouna, Bizerte, Tunisia
文摘The Ain El Bey abandoned mine, in North-West Tunisia, fits into the geodynamic context of the European and African plate boundary. Ore deposit corresponds to veins and breccia of multiphase Cu–Fe-rich mineralization related to various hydrothermal fluid circulations. Petromineralogical studies indicate a rich mineral paragenesis with a minimum of seven mineralization phases and, at least, six pyrite generations. As is also the case for galena and native silver, native gold is observed for the first time as inclusion in quartz which opens up, thus, new perspectives for prospecting and evaluating the potential for noble metals associated with the mineralization. Scanning Electron Microscope--Energy Dispersive Spectroscopy and Transmission electron microscopy analyses show, in addition, a large incorporation of trace elements, including Ag and Au, in mineral structures such as fahlores(tetrahedrite-tennantite) and chalcopyrite ones. The mineral/mineral associations, used as geothermometers, gave estimated temperatures for the mineralizing fluids varying from 254 to 330 ℃ for phase Ⅲ, from 254 to 350 ℃ for phase Ⅳ, and from 200 to 300 ℃ for phases Ⅴ and Ⅵ. The seventh and last identified mineralization phase, marked by a deposit of native gold, reflects a drop in the mineralizing fluid’s temperature(< 200 ℃) compatible with boiling conditions. Such results open up perspectives for the development of precious metal research and the revaluation of the Cu–Fe ore deposit at the Ain El Bey abandoned mine, as well as at the surrounding areas fitting in the geodynamic framework of the Africa-Europe plate boundary.
基金This research was funded by the National Natural Science Foundation of China(No.41862007)the Key Disciplines Construction of Kunming University of Science and Technology(No.14078384)the Yunnan Ten Thousand Talents Plan Young&Elite Talents Project(YNWR-QNBJ-2018-093)。
文摘The Yangla Cu skarn deposit is located in the central part of the Jinshajiang Suture Zone,southwest China,with a total reserve of 150 Mt Cu@1.03%.The newly discovered antimony orebodies at the depth of Yangla are strictly controlled by the stratum,structure,and lithology,which are lenticular and vein-like within the marble fracture zone,which can provide a window into multistage miner-alization and ore genesis at Yangla.Mineralization can be divided into three types,Cu–Pb–Zn(skarn)pyrite,galena,and sphalerite,Cu(porphyry)chalcopyrite and pyrite,and Sb(hydrothermal)stibnite and pyrite.The mineral assem-blages were stibnite+pyrite+calcite+quartz±minor scheelite in antimony ores.This study presents quantitative measurements of the trace element compositions of pyrite and stibnite from the Yangla antimony ores.Analysis of pyrite with electron probe microanalysis(EPMA)showed enrichment in Co,Ni,Sb,As,and Mo,and deficit in its S and Fe contents when compared to the stoichiometric con-centrations of S and Fe in pyrite.The Sb-related pyrite may belong to sedimentary-reworked genesis and may be modi-fied by hydrothermalfluids,thereby presenting a certain dif-ference(i.e.,crystal morphology,texture,and chemical com-position)compared to the skarn and porphyry Cu-related pyrite in the Yangla Cu skarn deposit.Analysis of stibnite with EPMA and inductively coupled plasma-mass spectrom-etry showed enrichment in As,Pb,Sn,Pb,Cu,and Zn,and presented much higher Sb contents and slightly lower S con-tents when compared to the stoichiometric concentrations of Sb and S in stibnite.Statistical analysis of the stibnite trace elements showed correlations for the elemental pairs Cu–Pb,As–Sb,and Sn–Pb,and the coupled substitution equations Sb^(3+)↔Cu^(+)+Pb^(2+),Sb^(3+)↔As^(3+),and Sn^(2+)↔Pb^(2+)may be the major factors governed the incorporating Cu,Pb,As and Sn within the stibnite.Moreover,this study preliminary shows that the antimony mineralization may belong to a car-bonate replacement hydrothermal genesis at Yangla.
基金supported by the Key Research Project of China Geological Survey(Grant No.DD20230564)the Research Project of Natural Resources Department of Gansu Province(Grant No.202219)。
文摘Three-dimensional geochemical modeling of ore-forming elements is crucial for predicting deep mineralization.This approach provides key information for the quantitative prediction of deep mineral localization,three-dimensional fine interpolation,analysis of spatial distribution patterns,and extraction of quantitative mineral-seeking markers.The Yechangping molybdenum(Mo)deposit is a significant and extensive porphyry-skarn deposit in the East Qinling-Dabie Mo polymetallic metallogenic belt at the southern margin of the North China Block.Abundant borehole data on oreforming elements underpin deep geochemical predictions.The methodology includes the following steps:(1)Threedimensional geological modeling of the deposit was established.(2)Correlation,cluster,and factor analyses post delineation of mineralization stages and determination of mineral generation sequence to identify(Cu,Pb,Zn,Ag)and(Mo,W,mfe)assemblages.(3)A three-dimensional geochemical block model was constructed for Mo,W,mfe,Cu,Zn,Pb,and Ag using the ordinary kriging method,and the variational function was developed.(4)Spatial distribution and enrichment characteristics analysis of ore-forming elements are performed to extract geological information,employing the variogram and w(Cu+Pb+Zn+Ag)/w(Mo+W)as predictive indicators.(5)Identifying the western,northwestern,and southwestern areas of the mine with limited mineralization potential,contrasted by the northeastern and southeastern areas favorable for mineral exploration.
基金financially supported by the Natural Science Foundation of China(Grant Nos.42272104,42172094 and 41772076)。
文摘The Wangjiazhuang Cu(-Mo)deposit,located within the Zouping volcanic basin in western Shandong Province,China,is unique in this area for having an economic value.In order to expound the metallogenetic characteristics of this porphyry-like hydrothermal deposit,a detailed fluid inclusion study has been conducted,employing the techniques of representative sampling,fluid inclusion petrography,microthermometry,Raman spectroscopy,LA-ICP-MS analysis of single fluid inclusions,as well as cathode fluorescence spectrometer analysis of host mineral quartz.The deposit contains mainly two types of orebodies,i.e.veinlet-dissemination-stockwork orebodies in the K-Si alteration zone and pegmatiticquartz sulfide veins above them.In addition,minor breccia ore occurs locally.Four types of fluid inclusions in the deposit and altered quartz monzonite are identified:L-type one-or two-phase aqueous inclusions,V-type vapor-rich inclusions with V/L ratios greater than 50%-90%,D-type multiphase fluid inclusions containing daughter minerals or solids and S-type silicate-bearing fluid inclusions containing mainly muscovite and biotite.Ore petrography and fluid inclusion study has revealed a three-stage mineralization process,driven by magmatic-hydrothermal fluid activity,as follows.Initially,a hydrothermal fluid,separated from the parent magma,infiltrated into the quartz monzonite,resulting in its extensive K-Si alteration,as indicated by silicate-bearing fluid inclusions trapped in altered quartz monzonite.This is followed by the early mineralization,the formation of quartz veinlets and dissemination-stockwork ores.During the main mineralization stage,due to the participation and mixing of meteoric groundwater with magmatic-sourced hydrothermal fluid,the cooling and phase separation caused deposition of metals from the hydrothermal fluids.As a result,the pegmatitic-quartz sulfide-vein ores formed.In the late mineralization stage,decreasing fluid salinity led to the formation of L-type aqueous inclusions and chalcopyrite-sulfosalt ore.Coexistence of V-type and D-type inclusions and their similar homogenization temperatures with different homogenization modes suggest that phase separation or boiling of the ore-forming fluids took place during the early and the main mineralization stages.The formation P-T conditions of S-type inclusions and the early and the main mineralization stages were estimated as ca.156-182 MPa and 450-650℃,350-450℃,18-35 MPa and 280-380℃,8-15 MPa,respectively,based on the microthermometric data of the fluid inclusions formed at the individual stages.
基金jointly supported by the National Natural Science Foundation of China(4220207742103025)+5 种基金the Opening Foundation of MNR Key Laboratory of Metallogeny and Mineral Assessment(ZS2209ZS2106)the Opening Foundation of Key Laboratory of Mineral Resources in Western China(Gansu Province)(MRWCGS-2021-01)the Natural Science Foundation of Gansu Province(22JR5RA440)the Fundamental Research Funds for the Central Universities(LZUJBKY-2022-42)the Guiding Special Funds of“Double First-Class(First-Class University&First-Class Disciplines)”(561119201)of Lanzhou University,China。
文摘Porphyry Cu(Mo-Au)deposit is one of the most important types of copper deposit and usually formed under magmatic arc-related settings,whilst the Mujicun porphyry Cu-Mo deposit in North China Craton uncommonly generated within intra-continental settings.Although previous studies have focused on the age,origin and ore genesis of the Mujicun deposit,the ore-forming age,magma source and tectonic evolution remain controversial.Here,this study targeted rutile(TiO_(2))in the ore-hosting diorite porphyry from the Mujicun Cu-Mo deposit to conduct in situ U-Pb dating and trace element composition studies,with major views to determine the timing and magma evolution and to provide new insights into porphyry Cu-Mo metallogeny.Rutile trace element data show flat-like REE patterns characterized by relatively enrichment LREEs and depleted HREEs,which could be identified as magmatic rutile.Rutile U-Pb dating yields lower intercept ages of 139.3–138.4 Ma,interpreted as post magmatic cooling timing below about 500℃,which are consistent or slightly postdate with the published zircon U-Pb ages of diorite porphyry(144.1–141.7 Ma)and skarn(146.2 Ma;139.9 Ma)as well as the molybdenite Re-Os ages of molybdenum ores(144.8–140.0 Ma).Given that the overlap between the closure temperature of rutile U-Pb system and ore-forming temperature of the Mujicun deposit,this study suggests that the ore-forming ages of the Mujicun deposit can be constrained at 139.3–138.4 Ma,with temporal links to the late large-scale granitic magmatism at 138–126 Ma in the Taihang Orogen.Based on the Mg and Al contents in rutile,the magma of ore-hosting diorite porphyry was suggested to be derived from crust-mantle mixing components.In conjunction with previous studies in Taihang Orogen,this study proposes that the far-field effect and the rollback of the subducting Paleo-Pacific slab triggered lithospheric extension,asthenosphere upwelling,crust-mantle interaction and thermo-mechanical erosion,which jointly facilitated the formation of dioritic magmas during the Early Cretaceous.Subsequently,the dioritic magmas carrying crust-mantle mixing metallic materials were emplaced and precipitated at shallow positions along NNE-trending ore-controlling faults,eventually resulting in the formation of the Mujicun Cu-Mo deposit within an intracontinental extensional setting.
基金funded by projects of the China Geological Survey(Nos.DD20242070,DD20230763,DD20221695,DD20190379,and DD20160346)。
文摘The Hongqiling large nickel-copper-cobalt deposit(hereafter referred to as the Hongqiling deposit),a typical mafic-ultramafic copper-nickel deposit in China,boasts proven Ni(Ni)resources of approximately 22×10^(4)t,associated copper resources of 2×10^(4)t,and associated cobalt(Co)resources of 0.5×10^(4)t,with Ni reserves ranking 10th among China's magmatic nickel deposits.Geotectonically,the Hongqiling deposit is situated in the superimposed zone between the Xing'an-Mongolian orogenic belt and the circum-Western Pacific's active continental margin belt.Its ore-bearing plutons occur within the metamorphic rocks of the Ordovician Hulan Group,with the emplacement of plutons and the locations of orebodies governed by the deep-seated Huifahe fault and its secondary NW-trending Fujia-Hejiagou-Beixinglong-Changsheng fault zone.In the deposit,the rock assemblages of ore-bearing plutons predominantly encompass gabbro-pyroxenite-olivine pyroxenite-pyroxene peridotite(pluton No.1)and norite-orthopyroxenite-harzburgite(pluton No.7),with ore-bearing lithofacies consisting primarily of olivine pyroxenite and pyroxenite facies.The Hongqiling deposit hosts stratoid,overhanging lentoid,veined,and pure-sulfide veined orebodies.Its ores principally contain metallic minerals including pyrrhotite,pentlandite,chalcopyrite,violarite,and pyrite.Despite unidentified magma sources of ore-bearing mafic-ultramafic rocks,it is roughly accepted that the magmatic evolution in the Hongqiling deposit primarily involved fractional crystallization and crustal contamination.The ore-forming materials were primarily derived from the upper mantle,mixed with minor crustal materials.The ore-bearing mafic-ultramafic rocks in the deposit,primarily emplaced during the Indosinian(208-239 Ma),were formed in an intense extension setting followed by the collisional orogeny between the North China Plate and the Songnen-Zhangguangcai Range Block during the Middle-Late Triassic.From the perspective of the metallogenic geological setting,surrounding rocks,ore-controlling structures,and rock assemblages,this study identified one favorable condition and seven significant indicators for prospecting for Hongqiling-type nickel deposits and developed a prospecting model of the Hongqiling deposit.These serve as valuable references for exploring similar nickel deposits in the region,as well as the deep parts and margins of the Hongqiling deposit.
基金financially supported by the National Key Basic Research Program (Grant2012CB416704) from the Ministry of Science and Technology, Chinagrant No. 40772063 from the National Natural Science Foundation of China+1 种基金the Program of Excellent Young Scientists from the Ministry of Land and Resources (200809)Geological Survey Program Grant 1212010561603-2 from the China Geological Survey
文摘Previous studies have obtained some petrogenetic and metallogenic chronological data with SHRIMP (sensitive high-resolution ion microprobe) zircon U-Pb, zircon LA-ICPMS (laser-ablation-inductively coupled plasma mass spectroscopy) U-Pb, molybdenite Re-Os isochron and muscovite Ar-Ar methods in southern Jiangxi Province and its adjacent areas. Based on these, the purpose of this paper is to study the petrogenetic and metallogenic ages and their time gap for different genetic types of W-Sn deposits, and thus to research their numerous episodes, zonal arrangement and their geodynamic background. The result shows that the large-scale W-Sn mineralization in southern Jiangxi Province occurred in the middle to late Jurassic (170-150 Ma), the skarn W-Sn-polymetallic deposits formed much earlier (170-161 Ma), and all of the wolframite-quartz vein type, greisen type, altered granite type and fractured zone type tungsten deposits formed in the late Jurassic (160-150 Ma). In one ore field or ore district, greisen type tungsten deposits formed earlier than quartz vein type ones hosted in the endoor exo-contact zone; and quartz vein type hosted in the endocontact zone formed earlier than that of exocontact zone. There is no significant time difference between tungstentin mineralization and its intimately associated parent granite emplacement (1-6 Ma). They all formed in the same rock-forming and ore-forming system and under the same geodynamic setting. Regionally, rock-forming and ore-forming processes of the W-Sn deposits in the Nanling region (include southern Jiangxi Province, southern Hunan Province, northern Guangdong Province and eastern Guangxi Zhuang Autonomous Region) exhibit numerous episodes. The mineralization in the Nanling region mainly occurred at (240-210) Ma, (170-150) Ma and (130-90) Ma. The tungsten-tin deposits in this region are centered by the largest scale in southern Jiangxi Province and southern Hunan Province, and become small in the east, west, south and north directions. This displays a zonal arrangement and temporal and spatial distribution regularity. Integrated with the latest research results, it is concluded that the W-Sn mineralization in southern Jiangxi Province and its adjacent areas corresponds to the second large-scale mineralization in South China. The Indosinian W-Sn mineralization formed under the extensional tectonic regime between collisional compressional stages, while the Yanshanian large-scale petrogenetic and metallogenic processes occurred in the Jurassic intraplate extensional geodynamic setting of lithosphere extension.
文摘The Junggar orogen, Xinjiang, China, is an important part of the Ural-Mongolian orogen.The collisional orogenesis in this region occurred primarily in the Carboniferous and Permianwith an evolutional process of early compression and late extension. Mineralization of gold andother metals in the Junggar orogen occurred mainly in the Permian and in a few cases in theLate Carboniferous. The deposits are largely distributed in areas where collisional orogenesiswas intensive and formed in a transitional stage from compression to extension. Therefore, goldmineralization in the Junggar orogen is fully consistent with the collisional orogenesis in time,space and geodynamic setting. This indicates that the mineral deposit model of collisionalorogenesis is applicable to prospecting and study of ore deposits in the Junggar orogen.Furthermore, the factual distribution of gold and other deposits in this region is just the same asthe collisional orogenic model presents.
基金supported by "Technology of Comprehensive Prospecting and Exploitability for Elements in Crisis Mines" (Grant No. 2008EG115074)a special fund managed by the Ministry of Science and Technology for technical R&D of scientific research institutions, and the Key Laboratory of Ore Deposit Geochemistry, Institute of Geochemistry, Chinese Academy of Sciences
文摘The Gejiu tin polymetallic deposits are located in the southeastern part of Yunnan Province in China. A detailed electronic microprobe study has been carried out to document geochemical compositions of tourmalines from the deposits. The results indicate a systematic change of mineral geochemical compositions, which might be used as a mineral geochemical tracer for post-magmatic hydrothermal fluid, basin fluid and their mixture. The tourmalines from granite are schori with Fe/ (Fe+Mg) ratios of 0.912-1.00 and Na/(Na+Ca) ratios of 0.892-0.981. Tourmalines as an inclusion in quartz from the ore bodies are dravite with Fe/(Fe+Mg) ratios of 0.212-0.519 and Na/(Na+Ca) ratios of 0.786--0.997. Tourmalines from the country rocks are dravite with Fe/(Fe+Mg) ratios of 0.313--0.337 and Na/(Na+Ca) ratio of 0.599-0.723. Tourmalines from cassiterite-tourmaline veins that occur in crannies within the country rocks show distinct optical zoning with alternate occurrence of dravite and schorl, Fe/(Fe+Mg)=0.374-0.843, Na/(Na+Ca)=0.538-0.987. It suggests that schorl in granite and dravite in carbonatite are related to magmatic fluid and basin fluid respectively. When magmatic fluid rose up and entered into crannies of the country rocks, consisting mainly of carbonatite, basin fluid would be constantly added to the magmatic fluid. The two types of fluid were mixed in structural crannies of the sedimentary basin accompanied with periodic geochemical oscillations to form material records in chemical composition zonings of tourmalines.
基金supported by the National Key R&D Program of China(Grant No.2016YFC0600501)the National Natural Science Foundation of China(NSFC)(Grant No.41430320).
文摘1 Introduction PCDs are generated in continental arcs in response to plate converging processes(subduction and collision)(Hou et al.,2009;Richards,2013).It is generally accepted that the formation of PCDs is associated with igneous activities either originating from lower crust or upper mantle,with contributions of crusts during the evolution of continental lithosphere.
基金supported by the National Basic Research Program of China(Grant No.2006CB701406)the National Natural Science Foundation of China(Grant Nos.40672196, 40638041)the Program of Introducing Talents of Discipline to Universities of China(Grant No.B07011)
文摘The self-similar is a common phenomena arising in the field of geology. It has been shown that geochemical element data, mineral deposits, and spacial distribution conform to a fractal structure. A fractal distribution requires that the number of objects larger than a specified size have a power-law dependence on size. This paper shows that a number of distributions, including power-function, Pareto, lognormal, and Zipf, display fractal properties under certain conditions and that this may be used as the mathematical basis for developing fractal models for data exhibiting such distributions. The summation method is developed on the basis of fractal models to determine thresholds for Au data in Shandong Province, China. The anomalous area is enclosed by contours which have contour values greater than or equal to threshold (200 × 10^- 9) and contains known large-sized and super large-sized gold mineral deposits.
基金This study is a contribution to Project 90051-01,a state key gold scientific and technological project during the 8th Five-Year Plan period,and Project 92-94-40 carried out by the State Gold Administration.
文摘The Jiapigou gold deposits are typical vein type deposits associated withArchaean greenstone belts in China. According to the crosscutting relationships between dykesand auriferous veins, single hydrothermal zircon U-Pb dating and quartz K-Ar,^(40)Ar-^(39)Ar andRb-Sr datings, the main mineralization stage of the Jiapigou deposit has been determined to be2469-2475 Ma, while mineralization superimposition on the gold deposit occurred in1800-2000 Ma and 130-272 Ma. They form a mineralization framework of one oldermetallogenic epoch (Late Archaean-Early Proterozoic) and one younger metallogenic epoch(Mesozoic) of gold deposits in Archaean greenstone belts in China.
基金the Youth Fund of the Chinese Academy of Geological Science (No.9011)
文摘Based on palaeomagnetic studies of the Precambrian gold deposits in the Xiong'ershan area, Henan Province, the authors infer that the ore-forming processes of the Beiling alteration-type gold ore deposit and the Dianfang breccia-type gold ore deposit started in the Proterozoic, and was superimposed by later mineralization, whereas the mineralization age of the Jiguanshan quartz- vein type gold ore deposit is Yanshanian.
文摘Discovery rates for all metals, including gold, are declining, the cost per significant discovery is increasing sharply, and the economic situation of the industry is one of low base rate. The current hierarchical structure of the exploration and mining industry makes this situation difficult to redress. Economic geologists can do little to influence the required changes to the overall structure and philosophy of an industry driven by business rather than geological principles, However, it should be possible to follow the lead of the oil industry and improve the success rate of greenfield exploration, necessary for the next group of lower-exploration-spend significant mineral deposit discoveries. Here we promote the concept that mineral explorers need to carefully consider the scale at which their exploration targets are viewed. It is necessary to carefully assess the potential of drill targets in terms of terrane to province to district scale, rather than deposit scale, where most current economic geology research and conceptual thinking is concentrated. If orogenic, IRGD, Carlin-style and IOCG gold-rich systems are viewed at the deposit scale, they appear quite different in terms of conventionally adop- ted research parameters. However, recent models for these deposit styles show increasingly similar source-region parameters when viewed at the lithosphere scale, suggesting common tectonic settings. It is only by assessing individual targets in their tectonic context that they can be more reliably ranked in terms of potential to provide a significant drill discovery. Targets adjacent to craton margins, other lithosphere boundaries, and suture zones are clearly favoured for all of these gold deposit styles, and such exploration could lead to incidental discovery of major deposits of other metals sited along the same tectonic boundaries.
文摘The discovery of new-type ore deposits, an important approach to guarantee the mineral resources supply in the 21st century, often brings about a gigantic increase in the mineral resources reserves. The analysis of mineralization system is of great importance to the discovery of new type ore deposits. ① The understanding of the relationship among various ore deposit types within a mineralization system in a region can help us to locate the unknown ore deposit types from the known ore deposit types, evidence that has been proved in the mineral prospecting history of ore belts in the middle and lower reaches of the Yangtze River, China. ② The understanding of the spatial structure of a mineralization system, especially of the vertical zonation, is helpful for the discovery of the concealed ore deposit types. ③ Clarifying the temporal structure of a mineralization system, including the iteration relationship between the mineral deposit types in the mineralization, leads to the location of the missing mineralization chains from the known mineralization chains (mineral deposit type), a method often proved to be effective in the magmatic hydrothermal mineralization system.④ Clarifying the factors restraining the diversity of mineral deposit types in mineralization system leads to the discovery of the potential of new type mineral deposits in relevant region. ⑤ Studying new mineralization setting and new ore forming processes leads to discovery of new type mineral deposit. More probabilities of discovery of new type mineral deposits are present in biogenic mineralization system, deep sea mineralization system, low temperature mineralization system, tectonic mineralization system and superimposed mineralization system.
基金funded by the major research program of the of National Natural Science Foundation of China entitled Metallogenic Mechanisms and Regularity of the Lithium Ore Concentration Area in the Zabuye Salt Lake, Tibet (91962219)Science and Technology Major Project of the Tibet Autonomous Region ’s Science and Techonlogy Plan (XZ202201ZD0004G01)a geological survey project of China Geological Survey (DD20230037)。
文摘A reasonable classification of deposits holds great significance for identifying prospecting targets and deploying exploration. The world ’s keen demand for lithium resources has expedited the discovery of numerous novel lithium resources. Given the presence of varied classification criteria for lithium resources presently, this study further ascertained and classified the lithium resources according to their occurrence modes, obtaining 10 types and 5 subtypes of lithium deposits(resources) based on endogenetic and exogenetic factors. As indicated by surveys of Cenozoic exogenetic lithium deposits in China and abroad,the formation and distribution of the deposits are primarily determined by plate collision zones, their primary material sources are linked to the anatectic magmas in the deep oceanic crust, and they were formed primarily during the Miocene and Late Paleogene. The researchers ascertained that these deposits,especially those of the salt lake, geothermal, and volcanic deposit types, are formed by unique slightly acidic magmas, tend to migrate and accumulate toward low-lying areas, and display supernormal enrichment. However, the material sources of lithium deposits(resources) of the Neopaleozoic clay subtype and the deep brine type are yet to be further identified. Given the various types and complex origins of lithium deposits(resources), which were formed due to the interactions of multiple spheres, it is recommended that the mineralization of exogenetic lithium deposits(resources) be investigated by integrating tectono-geochemistry, paleoatmospheric circulation, and salinology. So far, industrialized lithium extraction is primarily achieved in lithium deposits of the salt lake, clay, and hard rock types. The lithium extraction employs different processes, with lithium extraction from salt lake-type lithium deposits proving the most energy-saving and cost-effective.
文摘China is the third largest country in the world, with a land area of about 9.6 million km2. It is endowed with abundant mineral resources, and the metal mining activity can be traced back to ca. 8000 years ago. However, due to language barrier, little has been known about the geology and tectonics to the outside world until 1980s. In the last three decades, a great deal of knowledge has been gained, enhanced by a vigorous cooperation between Chinese and Western geologists. Research papers about geological, geochemical, and geochronological features of mineral deposits of China are widely published and cited in international journals. A comprehen- sive and comprehensible English literature that summarises the features of mineral deposits in China, however, is still lacking.
文摘Before intruding, primary magmas have undergone liquation and partial crystallization atdepth; as a result the magmas are partitioned into barren magma, ore-bearing magma, ore-richmagma and ore magma, which then ascend and are injected into the present locations once ormultiple times, thus forming ore deposits. The above-mentioned mineralizing process is knownas deep-seated magmatic liquation-injection mineralization. The volume of the barren magma isgenerally much larger than those of the ore-bearing magma, ore-rich magma and ore magma. Inthe ascending process, most of the barren magma intrudes into different locations or outpoursonto the ground surface, forming intrusions or lava flows. The rest barren magma, ore-bearingmagma, ore-rich magma and ore magma may either multiple times inject into the same space inwhich rocks and ores are formed or separately inject into different spaces in which rocks and oresare formed. The intrusions containing such deep-seated magmatic liquation-injection depositshave a much smaller volume, greater ore potential and higher ore grade than that of in-situmagmatic liquation deposits. Consequently this mineralizing process results in the formation oflarge deposits in small intrusions.