期刊文献+
共找到7篇文章
< 1 >
每页显示 20 50 100
超声波协同发芽处理对糙米淀粉结构和理化性质的影响
1
作者 张广琛 孙雪 +2 位作者 许新月 华东 刘贺 《中国食品学报》 EI CAS CSCD 北大核心 2024年第9期268-276,共9页
为了探究超声波协同发芽处理对糙米淀粉结构和理化性质的影响,采用波谱分析和电镜检测等方法,对比糙米、超声糙米、发芽糙米和超声协同发芽糙米中α-淀粉酶活性、淀粉表观与晶体结构以及理化性质的变化。结果显示:与糙米淀粉相比,超声... 为了探究超声波协同发芽处理对糙米淀粉结构和理化性质的影响,采用波谱分析和电镜检测等方法,对比糙米、超声糙米、发芽糙米和超声协同发芽糙米中α-淀粉酶活性、淀粉表观与晶体结构以及理化性质的变化。结果显示:与糙米淀粉相比,超声波协同发芽处理提高了发芽糙米中α-淀粉酶活性和还原糖含量,分别增加了0.9倍和12.0倍,淀粉含量降低了16.2%。超声波协同发芽处理使糙米淀粉颗粒表面呈现较多的凹坑和孔隙,但仍保持着原有的形貌特征。协同处理后糙米淀粉的晶体类型未发生显著变化,但其相对结晶度显著降低(P<0.05)。超声波协同发芽对糙米淀粉的糊化黏度影响显著,糊化焓值增加了0.6倍,崩解值减少了22.4%。结论:超声波协同发芽处理提升了糙米中α-淀粉酶活性,进而影响了糙米淀粉的结构特征与理化性质,这为糙米淀粉产品的改良和发芽全谷物食品的开发提供了理论依据。 展开更多
关键词 超声波协同发芽处理 糙米淀粉 Α-淀粉酶活性 结构特性 理化性质
下载PDF
外源ALA、SNP和Spd对NaCl胁迫下桔梗种子萌发特性的影响 被引量:8
2
作者 杜丹丹 何平 +1 位作者 张春平 喻泽莉 《广西植物》 CAS CSCD 北大核心 2011年第6期801-805,共5页
以药用植物桔梗为研究对象,通过测定不同浓度的ALA、SNP和Spd对NaCl胁迫下桔梗种子发芽势、发芽率、萌发指数和平均根长等萌发指标的影响,寻找提高桔梗种子及幼苗在盐胁迫条件下抗性能力的途径。实验结果表明,75mmol·L-1NaCl胁迫... 以药用植物桔梗为研究对象,通过测定不同浓度的ALA、SNP和Spd对NaCl胁迫下桔梗种子发芽势、发芽率、萌发指数和平均根长等萌发指标的影响,寻找提高桔梗种子及幼苗在盐胁迫条件下抗性能力的途径。实验结果表明,75mmol·L-1NaCl胁迫下的桔梗种子萌发受到显著抑制,但是用不同浓度的ALA、SNP和Spd对桔梗种子进行恢复处理后各萌发指标均显著升高。Spd(2.5mmol·L-1)、ALA(5mg·L-1)、SNP(0.1mmol·L-1)处理能有效缓解盐对种子的胁迫伤害。其中,经Spd(2.5mmol·L-1)处理下发芽势、发芽率、发芽指数和平均根长均达到最大值,发芽势为40.0%,发芽率为49.5%,发芽指数为9.28、平均根长为2.80cm。由此可以得出,适宜浓度的ALA、SNP、Spd可以缓解NaCl对桔梗种子的胁迫伤害,提高种子的抗盐能力,其中Spd效果最好,SNP次之,再者是ALA。 展开更多
关键词 桔梗 ALA SNP SPD 盐胁迫 种子萌发 萌发特性
下载PDF
PEG-6000胁迫对宿根天人菊种子萌发及幼苗生理特性的影响 被引量:21
3
作者 张凤银 陈禅友 胡志辉 《西北农林科技大学学报(自然科学版)》 CSCD 北大核心 2014年第1期132-136,共5页
【目的】研究PEG-6000胁迫对宿根天人菊种子萌发及幼苗生理特性的影响,为研究该植物的抗旱机理提供依据。【方法】用PEG-6000模拟干旱胁迫,研究在不同质量分数(1%,2%,5%,10%,15%,20%,25%)PEG-6000胁迫下,宿根天人菊种子发芽率、发芽... 【目的】研究PEG-6000胁迫对宿根天人菊种子萌发及幼苗生理特性的影响,为研究该植物的抗旱机理提供依据。【方法】用PEG-6000模拟干旱胁迫,研究在不同质量分数(1%,2%,5%,10%,15%,20%,25%)PEG-6000胁迫下,宿根天人菊种子发芽率、发芽势、发芽指数及幼苗主根长、芽长、鲜质量、SOD活性和MDA含量的变化规律。【结果】随PEG-6000质量分数的增加,宿根天人菊种子的发芽势、发芽率、发芽指数总体呈降低趋势,其中PEG-6000质量分数≥5%时,宿根天人菊种子的发芽势显著降低;PEG-6000质量分数≥15%时,种子发芽率极显著降低,25%PEG-6000处理的种子不能萌发。随PEG-6000质量分数的增加,宿根天人菊幼苗的芽长、鲜质量逐渐降低,主根长表现为先增加(1%~10%)后降低(10%~15%),SOD活性呈现先升(1%~5%)后降(5%~15%)趋势,MDA含量则逐渐增大。【结论】PEG-6000质量分数越大,对宿根天人菊种子萌发和幼苗生长的抑制作用越强,幼苗的细胞膜系统受伤害越大。 展开更多
关键词 PEG-6000胁迫 宿根天人菊 种子萌发 幼苗生理特性
下载PDF
Progress on Light-controlled Preservation Technology of Postharvest Vegetables 被引量:3
4
作者 王真 王清 +5 位作者 高丽朴 王云香 史君彦 郑秋丽 冀新然 左进华 《Agricultural Science & Technology》 CAS 2017年第6期1138-1144,共7页
Preservation technology of light control has received the widespread atten- tion for its safety, green, environmental-protection, high efficiency. It has become the hotspot in the area of postharvest vegetables preser... Preservation technology of light control has received the widespread atten- tion for its safety, green, environmental-protection, high efficiency. It has become the hotspot in the area of postharvest vegetables preservation. It could mainly be divid- ed into three categories: LED preservation, UV preservation and radiation preserva- tion. This paper systematically reviewed the mechanisms of different preservation technology of light control, summarized the research progress of light-controlled tech- nology in the physiological characteristics regulation, maintenance of nutritional quali- ty and microbial control of postharvest vegetables at home and aborad, and prospected the further studies on preservation technology for postharvest vegetables. 展开更多
关键词 Light-controlled preservation Postharvest vegetables Physiological char- acteristics Quality
下载PDF
亚麻叶碱蓬(Suaeda linifolia)的物候及结实格局 被引量:4
5
作者 张艳敏 魏岩 严成 《新疆农业大学学报》 CAS 北大核心 2010年第3期187-191,共5页
亚麻叶碱蓬的整个生活史为8个月,从种子萌发到现蕾的完全营养生长期与其生殖生长期时间接近持平,约各占整个生活周期的1/2。亚麻叶碱蓬由3朵花在叶腋形成聚头状花序,聚头状花序在分枝上形成穗状花序,聚头状花序位于中间位置的花先开,开... 亚麻叶碱蓬的整个生活史为8个月,从种子萌发到现蕾的完全营养生长期与其生殖生长期时间接近持平,约各占整个生活周期的1/2。亚麻叶碱蓬由3朵花在叶腋形成聚头状花序,聚头状花序在分枝上形成穗状花序,聚头状花序位于中间位置的花先开,开放后10~15 d,两侧花开放。中央花形成黑色果实,于花后1个月果实陆续成熟;两侧花形成褐色果实,花后子房发育长期停滞,于9月底10月初集中成熟。褐色果实和黑色果实在颜色、大小、质量上均有差异,着生方式均为直立。两种种子在4个温变周期(2℃/15℃,10℃/20℃,15℃/25℃,25℃/30℃,暗/光=12 h/12 h)下萌发率不同,褐色种子的萌发率显著高于黑色种子的萌发率,但两种种子的萌发率均小于80%,说明两种种子都存在生理休眠。低温层积处理能显著提高褐色种子和黑色种子的萌发率,褐色种子低温层积处理8周后萌发率大于95%,黑色种子处理16周后萌发率最高为71%,表明两种种子休眠程度不同。 展开更多
关键词 亚麻叶碱蓬 物候 种子多型性 结实格局 萌发对策
下载PDF
Chemical characteristics of fine particulate matter emitted from commercial cooking 被引量:2
6
作者 Bing PEI Hongyang CUI +1 位作者 Huan LIU Naiqiang YAN 《Frontiers of Environmental Science & Engineering》 CSCD 2016年第3期559-568,共10页
The chemical characteristics of fine particulate matter (PM2.5) emitted from commercial cooking were explored in this study. Three typical commercial restau- rants in Shanghai, i.e., a Shanghai-style one (SHS), a ... The chemical characteristics of fine particulate matter (PM2.5) emitted from commercial cooking were explored in this study. Three typical commercial restau- rants in Shanghai, i.e., a Shanghai-style one (SHS), a Sichuan-style one (SCS) and an Italian-style one (ITS), were selected to conduct PM2.5 sampling. Particulate organic matter (POM) was found to be the predominant contributor to cooking-related PM2.5 mass in all the tested restaurants, with a proportion of 69.1% to 77.1%. Specifically, 80 trace organic compounds were identified and quantified by gas chromatography/mass spectrometry (GC/MS), which accounted for 3.8%-6.5% of the total PM2.5 mass. Among the quantified organic compounds, unsaturated fatty acids had the highest concentration, followed by saturated fatty acids. Comparatively, the impacts of other kinds of organic compounds were much smaller. Oleic acid was the most abundant single species in both SCS and ITS. However, in the case of SHS, linoleic acid was the richest one. ITS produced a much larger mass fraction of most organic species in POM than the two Chinese cooking styles except for monosaccharide anhy-drides and sterols. The results of this study could be utilized to explore the contribution of cooking emissions to PM2.5 pollution and to develop the emission inventory of PM2.5 from cooking, which could then help the policymakers design efficient treatment measures and control strategies on cooking emissions in the future. 展开更多
关键词 commercial cooking PM2.5 chemical char- acteristics organic matter
原文传递
Conjugate heat transfer investigations of turbine vane based on transition models 被引量:6
7
作者 Zhang Hongjun Zou Zhengping +2 位作者 Li Yu Ye Jian Song Songhe 《Chinese Journal of Aeronautics》 SCIE EI CAS CSCD 2013年第4期890-897,共8页
The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw (AGS) and c-Re h transition models, a ... The accurate simulation of boundary layer transition process plays a very important role in the prediction of turbine blade temperature field. Based on the Abu-Ghannam and Shaw (AGS) and c-Re h transition models, a 3D conjugate heat transfer solver is developed, where the fluid domain is discretized by multi-block structured grids, and the solid domain is discretized by unstructured grids. At the unmatched fluid/solid interface, the shape function interpolation method is adopted to ensure the conservation of the interfacial heat flux. Then the shear stress transport (SST) model, SST & AGS model and SST & c-Re h model are used to investigate the flow and heat transfer characteristics of Mark II turbine vane. The results indicate that compared with the full turbulence model (SST model), the transition models could improve the prediction accuracy of temperature and heat transfer coefficient at the laminar zone near the blade leading edge. Compared with the AGS transition model, the c-Re h model could predict the transition onset location induced by shock/boundary layer interaction more accurately, and the prediction accuracy of temperature field could be greatly improved. 展开更多
关键词 AGS and c-Re h transition models Conjugate heat transfer Flow and heat transfer char- acteristics Temperature prediction accuracy Transition flow
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部