Types of hybrid architectures survivor memory unit (SMU) is presented,which are applicable to IEEE 802.3 ab 1000 Base-T Gigabit Ethernet (GbE) transceiver. Area, power and decoder latency were taken into account and m...Types of hybrid architectures survivor memory unit (SMU) is presented,which are applicable to IEEE 802.3 ab 1000 Base-T Gigabit Ethernet (GbE) transceiver. Area, power and decoder latency were taken into account and most efficient architectures were compared to optimize area/power tradeoff in different kinds of applications. Suitable SMU architectures are given out respectively in area-restrict, power-restrict and latency-restrict designs. A power-efficient architecture was selected in our GbE project. It provides 48% improvement in area and 71% amelioration in power, compared to classical register exchange architecture (REA) SMU.展开更多
To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The out...To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The output voltage of multi-channel equivalent circuit is converted by analog-to-digital converter (ADC). Then the validity of the converted signal is judged by field programmable gate array (FPGA). Finally,it is transmitted the host computer through Gigabit Ethernet for waveform displaying. Compared with the traditional equivalent equipment of IED,the designed system here can not only test the validity of the pulse signal and normal operation of equivalent circuit,but also realize fast and reliable analysis of pulse signal by means of Gigabit Ethernet. It solves the problems of low speed and lag of response of traditional equivalent equipment.展开更多
A high-speed and effective packet scheduling method is crucial to the performance of Gigabit routers. The paper studies the variable-length packet scheduling problem in Gigabit router with crossbar switch fabric and i...A high-speed and effective packet scheduling method is crucial to the performance of Gigabit routers. The paper studies the variable-length packet scheduling problem in Gigabit router with crossbar switch fabric and input queuing, and a scheduling method based on neural network is proposed. For the proposed method, a scheduling system structure fit for the variable-length packet case is presented first, then some rules for scheduling are given. At last, an optimal scheduling method using Hopfield neural network is proposed based on the rules. Furthermore, the paper discusses that the proposed method can be realized by hardware circuit. The simulation result shows the effectiveness of the proposed method.展开更多
In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel m...In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel measurements and models for both line-of-sight(LOS)and non-LOS(NLOS)scenarios,60 GHz propagation mechanisms are summarized,and 60 GHz UWB link budget and performance are analyzed.Tests are performed for determining ranges and antenna configurations.Results show that gigabit capacity can be achieved with omni-directional antennas configuration at the transceiver,especially in LOS conditions.When the LOS path is blocked by a moving person or by radiowave propagation in the NLOS situation,omni-directional and directional antennas configuration at the transceiver is required,especially for a larger range between machines in office rooms.Therefore,it is essential to keep a clear LOS path in M2M applications like gigabit data transfer.The goal of this work is to provide useful information for standardizations and design of 60 GHz UWB systems.展开更多
In this paper, a novel reconfiguration technique is developed in the context of a fault-tolerant Networked Control System (NCS) in two train wagons. All sensors, controllers and actuators in both wagons are connected ...In this paper, a novel reconfiguration technique is developed in the context of a fault-tolerant Networked Control System (NCS) in two train wagons. All sensors, controllers and actuators in both wagons are connected on top of a single Gigabit Ethernet network. The network also carries wired and wireless entertainment loads. A Markov model is used to prove that this reconfiguration technique reduces the effect of a failure in the error detection and switching mechanisms on the reliability of the control function. All calculations are based on closed-form solutions and verified using the SHARPE software package.展开更多
The motivation behind this work is the need for performance analysis of Al-Gehad/Baghdad“Fiber To The Home”(FTTH) network which is one of the Iraq Telecommunication Post and Company(ITPC) FTTH projectsin2010 in Bagh...The motivation behind this work is the need for performance analysis of Al-Gehad/Baghdad“Fiber To The Home”(FTTH) network which is one of the Iraq Telecommunication Post and Company(ITPC) FTTH projectsin2010 in Baghdad City. Based on the detailed study of this project, the design, implementation, and analysis of this network has been putting under consideration through a mathematical model simulated and performance evaluated. The link utilization and number of OLT ports (PON) had been studied and evaluated as a function of cycle time. Cost optimization was done through evaluation the total cost of PON system and who it affected with the number of ONUs (i.e. splitting ratio), as well as cost ratio between EPON and GPON is evaluated. Then GPON system has been optimized to analyze and evaluate the feeder network cost, distribution network cost, and total network cost.展开更多
基金National Science Fund for Creative ResearchGroups (No.60521002)Shanghai NaturalScience Foundation(No.037062022)
文摘Types of hybrid architectures survivor memory unit (SMU) is presented,which are applicable to IEEE 802.3 ab 1000 Base-T Gigabit Ethernet (GbE) transceiver. Area, power and decoder latency were taken into account and most efficient architectures were compared to optimize area/power tradeoff in different kinds of applications. Suitable SMU architectures are given out respectively in area-restrict, power-restrict and latency-restrict designs. A power-efficient architecture was selected in our GbE project. It provides 48% improvement in area and 71% amelioration in power, compared to classical register exchange architecture (REA) SMU.
文摘To test the pulse signal of initiating explosive device (IED) in an aircraft,a multi-channel equivalent system for IED based on Gigabit Ethernet transmission is designed according to its electrical parameters. The output voltage of multi-channel equivalent circuit is converted by analog-to-digital converter (ADC). Then the validity of the converted signal is judged by field programmable gate array (FPGA). Finally,it is transmitted the host computer through Gigabit Ethernet for waveform displaying. Compared with the traditional equivalent equipment of IED,the designed system here can not only test the validity of the pulse signal and normal operation of equivalent circuit,but also realize fast and reliable analysis of pulse signal by means of Gigabit Ethernet. It solves the problems of low speed and lag of response of traditional equivalent equipment.
文摘A high-speed and effective packet scheduling method is crucial to the performance of Gigabit routers. The paper studies the variable-length packet scheduling problem in Gigabit router with crossbar switch fabric and input queuing, and a scheduling method based on neural network is proposed. For the proposed method, a scheduling system structure fit for the variable-length packet case is presented first, then some rules for scheduling are given. At last, an optimal scheduling method using Hopfield neural network is proposed based on the rules. Furthermore, the paper discusses that the proposed method can be realized by hardware circuit. The simulation result shows the effectiveness of the proposed method.
基金supported by the State Key Laboratory of Millimeter Waves,Southeast University,China under grant No.K201517supported by the Fundamental Research Funds for the Central Universities under Grant No.2015 XS19.
文摘In this paper,the feasibility and performance of millimeter wave(mm Wave)60 GHz ultra-wide band(UWB)systems for gigabit machine-to-machine(M2M)communications are analyzed.Specifically,based on specifications,channel measurements and models for both line-of-sight(LOS)and non-LOS(NLOS)scenarios,60 GHz propagation mechanisms are summarized,and 60 GHz UWB link budget and performance are analyzed.Tests are performed for determining ranges and antenna configurations.Results show that gigabit capacity can be achieved with omni-directional antennas configuration at the transceiver,especially in LOS conditions.When the LOS path is blocked by a moving person or by radiowave propagation in the NLOS situation,omni-directional and directional antennas configuration at the transceiver is required,especially for a larger range between machines in office rooms.Therefore,it is essential to keep a clear LOS path in M2M applications like gigabit data transfer.The goal of this work is to provide useful information for standardizations and design of 60 GHz UWB systems.
文摘In this paper, a novel reconfiguration technique is developed in the context of a fault-tolerant Networked Control System (NCS) in two train wagons. All sensors, controllers and actuators in both wagons are connected on top of a single Gigabit Ethernet network. The network also carries wired and wireless entertainment loads. A Markov model is used to prove that this reconfiguration technique reduces the effect of a failure in the error detection and switching mechanisms on the reliability of the control function. All calculations are based on closed-form solutions and verified using the SHARPE software package.
文摘The motivation behind this work is the need for performance analysis of Al-Gehad/Baghdad“Fiber To The Home”(FTTH) network which is one of the Iraq Telecommunication Post and Company(ITPC) FTTH projectsin2010 in Baghdad City. Based on the detailed study of this project, the design, implementation, and analysis of this network has been putting under consideration through a mathematical model simulated and performance evaluated. The link utilization and number of OLT ports (PON) had been studied and evaluated as a function of cycle time. Cost optimization was done through evaluation the total cost of PON system and who it affected with the number of ONUs (i.e. splitting ratio), as well as cost ratio between EPON and GPON is evaluated. Then GPON system has been optimized to analyze and evaluate the feeder network cost, distribution network cost, and total network cost.
