A down-conversion mixer and an up-conversion mixer for 2.4GHz WLAN transceivers are presented.The down-conversion mixer uses a class-AB input stage to get high linearity and to realize input impedance matching and sin...A down-conversion mixer and an up-conversion mixer for 2.4GHz WLAN transceivers are presented.The down-conversion mixer uses a class-AB input stage to get high linearity and to realize input impedance matching and single-ended to differential conversion.The mixers are implemented in 0.18μm CMOS process.The measured results are given to show their performance.展开更多
A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used ...A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used to improve the linearity of the quadrature modulator;An LC resonant tank is used as the load of the upconversion mixer to improve its gain and increase the voltage swing. The measurement results show that the input P1dB achieves -3.6dBm, the transducer power gain of the circuit is -3.6dB,and the current consumes about 45.8mA with a 1.8V power supply.展开更多
基于130 nm CMOS工艺,设计了工作于K波段的双平衡下变频混频器。在传统吉尔伯特单元基础上采用电流复用注入结构,减小了开关级的偏置电流,提升了开关性能。在开关级源端引入谐振电感,消除了开关共源节点处的寄生电容,抑制了射频信号的泄...基于130 nm CMOS工艺,设计了工作于K波段的双平衡下变频混频器。在传统吉尔伯特单元基础上采用电流复用注入结构,减小了开关级的偏置电流,提升了开关性能。在开关级源端引入谐振电感,消除了开关共源节点处的寄生电容,抑制了射频信号的泄露,提高了增益,减小了噪声。仿真结果表明,输入射频信号为24 GHz,本振信号为24.5 GHz,本振输入功率为-3 d Bm时,该混频器的转换增益为25.8 d B,单边带噪声系数为6.4 d B,输入3阶互调截点为-8.6 d Bm。展开更多
A double balanced Gilbert-cell class-A amplifier bleeding mixer (DBGC CAAB mixer) is proposed and implemented. The injection current is utilized to amplify the local oscillator (LO) signal to improve the performance o...A double balanced Gilbert-cell class-A amplifier bleeding mixer (DBGC CAAB mixer) is proposed and implemented. The injection current is utilized to amplify the local oscillator (LO) signal to improve the performance of the transconductor stage. The DBGC CAAB mixer achieves a conversion gain of 17.5 dB at -14 dBm LO power, and the noise figure is suppressed from 45 dB to 10.7 dB. It is important to stress that the new configuration will not drain additional power in contrast to the former current bleeding mixers. This topology dramatically relieves the requirement of the LO power. The DBGC CAAB mixer is implemented by using 0.18-μm RFCMOS technology and operates at the 2.4 GHz ISM application with 10 MHz intermediate frequency. The power consumption is 12 mA at 1.5 V supply voltage. The DBGC CAAB mixer features the highest FOM figure within a wide range of LO power.展开更多
文摘A down-conversion mixer and an up-conversion mixer for 2.4GHz WLAN transceivers are presented.The down-conversion mixer uses a class-AB input stage to get high linearity and to realize input impedance matching and single-ended to differential conversion.The mixers are implemented in 0.18μm CMOS process.The measured results are given to show their performance.
文摘A quadrature modulator and an up-conversion mixer for an 802. lla wireless LAN system are designed and fabricated in 0.18μm gate length standard CMOS technology. A current feedback loop with a transconductor is used to improve the linearity of the quadrature modulator;An LC resonant tank is used as the load of the upconversion mixer to improve its gain and increase the voltage swing. The measurement results show that the input P1dB achieves -3.6dBm, the transducer power gain of the circuit is -3.6dB,and the current consumes about 45.8mA with a 1.8V power supply.
文摘基于130 nm CMOS工艺,设计了工作于K波段的双平衡下变频混频器。在传统吉尔伯特单元基础上采用电流复用注入结构,减小了开关级的偏置电流,提升了开关性能。在开关级源端引入谐振电感,消除了开关共源节点处的寄生电容,抑制了射频信号的泄露,提高了增益,减小了噪声。仿真结果表明,输入射频信号为24 GHz,本振信号为24.5 GHz,本振输入功率为-3 d Bm时,该混频器的转换增益为25.8 d B,单边带噪声系数为6.4 d B,输入3阶互调截点为-8.6 d Bm。
文摘A double balanced Gilbert-cell class-A amplifier bleeding mixer (DBGC CAAB mixer) is proposed and implemented. The injection current is utilized to amplify the local oscillator (LO) signal to improve the performance of the transconductor stage. The DBGC CAAB mixer achieves a conversion gain of 17.5 dB at -14 dBm LO power, and the noise figure is suppressed from 45 dB to 10.7 dB. It is important to stress that the new configuration will not drain additional power in contrast to the former current bleeding mixers. This topology dramatically relieves the requirement of the LO power. The DBGC CAAB mixer is implemented by using 0.18-μm RFCMOS technology and operates at the 2.4 GHz ISM application with 10 MHz intermediate frequency. The power consumption is 12 mA at 1.5 V supply voltage. The DBGC CAAB mixer features the highest FOM figure within a wide range of LO power.
