To meet the requirements of pipeline consumers abroad,in this study,an automatic gas metal arc welding type of girth welding was performed with a heat input of no more than 0.25 kJ/mm and high-strength solid-wire matc...To meet the requirements of pipeline consumers abroad,in this study,an automatic gas metal arc welding type of girth welding was performed with a heat input of no more than 0.25 kJ/mm and high-strength solid-wire matching for an X70M large-diameter UOE pipeline.An integral evaluation of the X70M pipeline girth weldability was performed with respect to the girth-weld cold-cracking sensitivity during the welding process and the strengthening,hardening,and embrittlement of the girth weld joint after girth welding in especially rigorous welding conditions with accelerated failure characteristics.The performance of the above girth weld joint with joints welded using the main construction-field girth welding procedure was compared to ensure the good girth weldability of the X70M pipeline.The results of this study have important supervisory significance for field-construction girth welding.Finally,the girth weldability of the X70M pipeline was found to satisfy the field construction requirements even when the welding conditions are especially rigorous.展开更多
为研究Nb含量对焊接热影响区微观组织和性能的影响,采用熔化极气体保护焊(gas metal arc welding,GMAW)和手工焊条电弧焊(shielded metal arc welding,SMAW)对0.055%Nb和0.075%Nb含量的X80钢管进行环焊.采用夏比冲击试验和金相分析方法...为研究Nb含量对焊接热影响区微观组织和性能的影响,采用熔化极气体保护焊(gas metal arc welding,GMAW)和手工焊条电弧焊(shielded metal arc welding,SMAW)对0.055%Nb和0.075%Nb含量的X80钢管进行环焊.采用夏比冲击试验和金相分析方法,研究热影响区的微观组织差异和夏比冲击韧性.并借助扫描电镜和超高温激光共聚焦显微镜分析不同Nb含量X80管体的微观组织对热影响区性能的影响.结果表明,在0℃和-20℃时,0.075%Nb和0.055%Nb的X80钢管GMAW环焊接头热影响区均具有较高的冲击韧性,其平均冲击吸收能量均高于150 J.其中0.055%Nb略高于0.075%Nb的GMAW环焊接头热影响区夏比冲击吸收能量;焊接热输入较低时,0.055%Nb低于0.075%Nb的X80环焊接头粗晶区的韧脆转变温度,具有更好的低温韧性.焊接热输入较高时,0.075%Nb的X80环焊接头粗晶区具有更高的上平台冲击吸收能量,且上平台温度和韧脆转变温度也更低,其低温韧性也更优异;还发现了X80环焊接头热影响区的冲击韧性不仅与热输入量和热影响区马氏体-奥氏体组织(M-A)的形状、大小、分布有关,而且还受管体中Nb含量、原始的强度与韧性、微观组织状态的遗传影响.展开更多
文摘To meet the requirements of pipeline consumers abroad,in this study,an automatic gas metal arc welding type of girth welding was performed with a heat input of no more than 0.25 kJ/mm and high-strength solid-wire matching for an X70M large-diameter UOE pipeline.An integral evaluation of the X70M pipeline girth weldability was performed with respect to the girth-weld cold-cracking sensitivity during the welding process and the strengthening,hardening,and embrittlement of the girth weld joint after girth welding in especially rigorous welding conditions with accelerated failure characteristics.The performance of the above girth weld joint with joints welded using the main construction-field girth welding procedure was compared to ensure the good girth weldability of the X70M pipeline.The results of this study have important supervisory significance for field-construction girth welding.Finally,the girth weldability of the X70M pipeline was found to satisfy the field construction requirements even when the welding conditions are especially rigorous.
文摘为研究Nb含量对焊接热影响区微观组织和性能的影响,采用熔化极气体保护焊(gas metal arc welding,GMAW)和手工焊条电弧焊(shielded metal arc welding,SMAW)对0.055%Nb和0.075%Nb含量的X80钢管进行环焊.采用夏比冲击试验和金相分析方法,研究热影响区的微观组织差异和夏比冲击韧性.并借助扫描电镜和超高温激光共聚焦显微镜分析不同Nb含量X80管体的微观组织对热影响区性能的影响.结果表明,在0℃和-20℃时,0.075%Nb和0.055%Nb的X80钢管GMAW环焊接头热影响区均具有较高的冲击韧性,其平均冲击吸收能量均高于150 J.其中0.055%Nb略高于0.075%Nb的GMAW环焊接头热影响区夏比冲击吸收能量;焊接热输入较低时,0.055%Nb低于0.075%Nb的X80环焊接头粗晶区的韧脆转变温度,具有更好的低温韧性.焊接热输入较高时,0.075%Nb的X80环焊接头粗晶区具有更高的上平台冲击吸收能量,且上平台温度和韧脆转变温度也更低,其低温韧性也更优异;还发现了X80环焊接头热影响区的冲击韧性不仅与热输入量和热影响区马氏体-奥氏体组织(M-A)的形状、大小、分布有关,而且还受管体中Nb含量、原始的强度与韧性、微观组织状态的遗传影响.
