Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was...Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was prepared by alkaline pretreatment and bleaching treat-ment of paulownia wood followed by impregnation of epoxy resin and ethylene glycol diglycidyl ether(EDGE).The eff ect of delignifi cation degree on the optical and mechani-cal properties of FTW was studied,and the infl uence of the epoxy/EDGE ratio on the fl exibility and mechanical proper-ties of FTW was also investigated.The results showed that higher delignifi cation degree resulted in higher transmit-tance of FTW.More EDGE addition led to better fl exibility of FTW,while overmuch addition of EDGE will reduce the mechanical properties.The optimal FTW sample resulted in a high transmittance of 89%and an ultrahigh haze value of 97%with outstanding fl exibility and excellent mechanical properties.The investigation of FTW broadens the research fi eld of transparent wood,and provides great possibility for its application in fl exible wearable devices and fl exible materials.展开更多
A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylam...A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.展开更多
将纤维素溶解在氢氧化钠/尿素/水溶液中,与新戊二醇二缩水甘油醚(NGDE)发生交联反应,经过离心水洗纯化后冷冻干燥,制备了纤维素多孔材料。采用傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)、热重分析(TGA)和扫描电镜(SEM),对制备的纤维...将纤维素溶解在氢氧化钠/尿素/水溶液中,与新戊二醇二缩水甘油醚(NGDE)发生交联反应,经过离心水洗纯化后冷冻干燥,制备了纤维素多孔材料。采用傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)、热重分析(TGA)和扫描电镜(SEM),对制备的纤维素多孔吸附材料的化学结构、晶型结构、热稳定性及微观形貌进行表征。研究了NGDE的用量和水凝胶质量分数对纤维素多孔材料的密度及吸水性能的影响。结果表明,4 g纤维素溶于100 g NaOH/尿素/水(质量比为7∶12∶81)溶液中制得纤维素溶液,在NGDE的用量18 m L,水凝胶质量分数为1.5%时,制备的纤维素多孔材料的密度为15.7 mg/cm3,吸水倍数达37倍,对此条件下制备的纤维素多孔材料进行结构分析,表明纤维素多孔材料具有连续的网状孔结构,纤维素的晶型由纤维素Ⅰ型转变为非晶态结构,初始热分解温度在250℃以上,热稳定性好。展开更多
基金funded by the National Natural Science Foundation of China(31760183)the Natural Science Foundation of Guangxi(2016GXNSFCA380025)+1 种基金the Project Funded by China Postdoctoral Science Foundation(2017M620361)the Scientifi c Research Foundation of Guangxi University(XGZ150513).
文摘Transparent wood has potential application in intelligent building,solar cell,electronics,and other advanced materials,while its single functionability hinders its further development.Flexible transparent wood(FTW)was prepared by alkaline pretreatment and bleaching treat-ment of paulownia wood followed by impregnation of epoxy resin and ethylene glycol diglycidyl ether(EDGE).The eff ect of delignifi cation degree on the optical and mechani-cal properties of FTW was studied,and the infl uence of the epoxy/EDGE ratio on the fl exibility and mechanical proper-ties of FTW was also investigated.The results showed that higher delignifi cation degree resulted in higher transmit-tance of FTW.More EDGE addition led to better fl exibility of FTW,while overmuch addition of EDGE will reduce the mechanical properties.The optimal FTW sample resulted in a high transmittance of 89%and an ultrahigh haze value of 97%with outstanding fl exibility and excellent mechanical properties.The investigation of FTW broadens the research fi eld of transparent wood,and provides great possibility for its application in fl exible wearable devices and fl exible materials.
基金supported by the National High-Technology Research and Development Program of China (Grant No.2002AA6Z3083)
文摘A novel UV-curable prepolymer neopentyl glycol diglycidyl ether diacrylate (NPGGEA) was synthesized by using neopentyl glycol diglycidyl ether (NPGGE) and acrylic acid (AA) as starting materials, N, N-dimethylbenzylamine as catalyst and p-hydroxyanisole as inhibitor. The optimum synthetic conditions were taken as follows: The concentration of N,N-dimethylbenzylamine, 0.80% of reactants; the concentration of p-hydroxyanisole, 0.3% of reactants; the reaction temperature, 90-110 ; the molar ratio of NPGGE to AA, 1:2.2. Meanwhile, 1-hydroxycyclohexyl phenyl ketone of a UV-cured initiator was added to the synthesized NPGGEA to prepare a kind of UV-cured coating. Mechanical properties of the UV-cured films were determined, giving 28.75 MPa of tensile strength, 923.82 MPa of Young’s modulus and 5.51% of elongation at tear.
文摘将纤维素溶解在氢氧化钠/尿素/水溶液中,与新戊二醇二缩水甘油醚(NGDE)发生交联反应,经过离心水洗纯化后冷冻干燥,制备了纤维素多孔材料。采用傅里叶变换红外光谱(FT-IR)、X射线衍射(XRD)、热重分析(TGA)和扫描电镜(SEM),对制备的纤维素多孔吸附材料的化学结构、晶型结构、热稳定性及微观形貌进行表征。研究了NGDE的用量和水凝胶质量分数对纤维素多孔材料的密度及吸水性能的影响。结果表明,4 g纤维素溶于100 g NaOH/尿素/水(质量比为7∶12∶81)溶液中制得纤维素溶液,在NGDE的用量18 m L,水凝胶质量分数为1.5%时,制备的纤维素多孔材料的密度为15.7 mg/cm3,吸水倍数达37倍,对此条件下制备的纤维素多孔材料进行结构分析,表明纤维素多孔材料具有连续的网状孔结构,纤维素的晶型由纤维素Ⅰ型转变为非晶态结构,初始热分解温度在250℃以上,热稳定性好。
