Influence of Single Use and Combination of Reductants on the Size, Morphology and Growth Steps of Gold Nanoparticles in Colloidal Mixture

A comprehensive investigation on the formation mechanism of gold nanoparticles (AuNPs) in colloidal mixture obtained from the reduction of chloroauric acid (HAuCl4) solution using a single reducing agent (sodium citrate;process-I), (tannic acid;process-II), and a combination of two reducing agents (sodium citrate plus tannic acid;process-III) is reported. The growth steps at different time intervals during synthesis of colloidal AuNPs were monitored in situ and ex situ using various methods for all the three processes. The measurement of changes in the surface plasmon band position of colloidal AuNPs, along with dynamic light scattering results gave important information for the first assessing of particle size, shape and distribution. Besides, the size and morphological changes at different stages during different processes were also analyzed by transmission electron microscopy. The final Au particles of processes-I & II exhibited different shapes (spherical and nanowires) with particle size and nano wire diameter of 12 nm and 17 nm, respectively. Nevertheless, combination of two reductants (process-III) surprisingly leads to drastically reduced size (ca. 3 nm) with spherical morphology compared to their parent solutions with either of single reducing agent. This result clearly indicates that the combination of reductants has a significant influence on the particle size, morphology and formation mechanism.

Anisotropic gold nanoparticles: Preparation and applications in catalysis

Despite the high amount of scientific work dedicated to the gold nanoparticles in catalysis, most of the research has been performed utilising supported nanoparticles obtained by traditional impreg‐nation of gold salts onto a support, co‐precipitation or deposition‐precipitation methods which do not benefit from the recent advances in nanotechnologies. Only more recently, gold catalyst scien‐tists have been exploiting the potential of preforming the metal nanoparticles in a colloidal suspen‐sion before immobilisation with great results in terms of catalytic activity and the morphology con‐trol of mono‐and bimetallic catalysts. On the other hand, the last decade has seen the emergence of more advanced control in gold metal nanoparticle synthesis, resulting in a variety of anisotropic gold nanoparticles with easily accessible new morphologies that offer control over the coordination of surface atoms and the optical properties of the nanoparticles （tunable plasmon band） with im‐mense relevance for catalysis. Such morphologies include nanorods, nanostars, nanoflowers, den‐dritic nanostructures or polyhedral nanoparticles to mention a few. In addition to highlighting newly developed methods and properties of anisotropic gold nanoparticles, in this review we ex‐amine the emerging literature that clearly indicates the often superior catalytic performance and amazing potential of these nanoparticles to transform the field of heterogeneous catalysis by gold by offering potentially higher catalytic performance, control over exposed active sites, robustness and tunability for thermal‐, electro‐and photocatalysis.

Electrochemical Aptasensor Based on Prussian Blue-Chitosan-Glutaraldehyde for the Sensitive Determination of Tetracycline

In this paper, a novel and sensitive electrochemical aptasensor for detecting tetracycline(TET)with prussian blue(PB) as the label-free signal was fabricated. A PB-chitosan-glutaraldehyde(PB-CS-GA)system acting as the signal indicator was developed to improve the sensitivity of the electrochemical aptasensor.Firstly, the PB-CS-GA was fixed onto the glass carbon electrode surface. Then, colloidal gold nanoparticles(Au NPs) were droped onto the electrode to immobilize the anti-TET aptamer for preparation of the aptasensor.The stepwise assembly process of the aptasensor was characterized by cyclic voltammetry(C-V) and scanning electron microscope(SEM). The target TET captured onto the electrode induced the current response of the electrode due to the non-conducting biomoleculars. Under the optimum operating conditions, the response of differential pulse voltammetry(DPV) was used for detecting the concentration of TET. The proposed aptasensor showed a high sensitivity and a wide linear range of 109-～ 105-M and 105-～ 102-M with the correlation coefficients of 0.994 and 0.992, respectively. The detection limit was 3.2×1010-M(RSD 4.12%). Due to its rapidity, sensitivity and low cost, the proposed aptasensor could be used as a pre-scanning method in TET determination for the analysis of livestock products.

Characterization of colloidal arsenic at two abandoned gold mine sites in Nova Scotia, Canada, using asymmetric flow-field flow fractionation-inductively coupled plasma mass spectrometry

Asymmetric flow-field flow fractionation-inductively-coupled plasma-mass spectrometry was used to determine whether colloidal arsenic（As） exists in soil pore water and soil extract samples at two arsenic-contaminated abandoned gold mines（Montague and Goldenville, Nova Scotia）. Colloidal arsenic was found in 12 out of the 80 collected samples（= 15%）, and was primarily associated with iron（Fe） in the encountered colloids. The molar Fe/As ratios indicate that the colloids in some samples appeared to be discrete iron–arsenic minerals, whereas in other samples, they were more consistent with As-rich iron（oxy）hydroxides. Up to three discrete size fractions of colloidal As were encountered in the samples, with mean colloid diameters between 6 and 14 nm. The pore water samples only contained one size fraction of As-bearing colloids（around 6 nm diameter）, while larger As-bearing colloids were only encountered in soil extracts.

Glucose oxidase as a blocking agent-based signal amplification strategy for the fabrication of label-free amperometric immunosensors

An effective electrochemical signal amplification strategy based on enzyme membrane modification and redox probe immobilization was proposed to construct an amperometric immunosensor.L-cysteine@ferrocene functionalized chitosan,which possessed not only efficient redox-activity but also excellent film-forming ability,was coated on the bare glass carbon electrode. Moreover,the thiol groups(SH)in the ferrocenyl compound were used for gold nanoparticles immobilization via the strong bonding interaction,which could further be utilized for the immobilization of antibody biomolecules with well-retained bioactivities.Finally,glucose oxidase(GOD)as the enzyme membrane was employed to block the possible remaining active sites and avoid the nonspecific adsorption.With the excellent electrocatalytic properties of GOD towards glucose,the amplification of antigen-antibody interaction and the enhanced sensitivity could be achieved.Under the optimal conditions,the linear range of the proposed immunosensor for the determination of carcinoembryonic antigen(CEA)was from 0.05 to 100 ng/mL with a detection limit of 0.02 ng/mL(S/N=3).Moreover,the immunosensor exhibited good selectivity,stability and reproducibility, which provided a promising potential for clinical immunoassay.