An Application of Microwave Pre-oxidation in Improving Gold Recovery of a Refractory Gold Ore

Microwave radiation was employed as a pretreating technology to oxidise a refractory gold ore. Heating characteristics showed that, in an identical microwave field, the bulk temperature of the sample increased with microwave power, microwave radiation time and particle size. The rate of sulphur removal increased with microwave radiation time. Particle size also had a significant effect on the oxidation rate. Pyrite and marcasite could be oxidised into Fe 2O 3 with a high porous structure. When microwave radiation was carried out in a rotary bed, the oxidation was more uniformly developed, in comparison with in a fixed bed. Gold extraction by cyanidation could be remarkably improved after the ore was subjected to microwave radiation. The results showed that gold recovery could be improved from 37% to 69%～ 81.2 %.

Kinetics of leaching refractory gold ores by ultrasonic-assisted electro-chlorination

The resources of refractory gold ores are abundant, and their effective treatment can bring good economic benefits. This paper investigated the kinetics of leaching gold from refractory gold ores by ultrasonic-assisted electro-chlorination. The effects of ultrasound time ratio, initial hydrochloric acid concentration and leaching temperature on the kinetic parameters were discussed. It is found that the leaching ratio goes up with all the factors increasing. The reaction kinetics is controlled by diffusion. When ultrasound improves the diffusion by reducing the diffusion resistance, the activation energy increases to 37.1 kJ/mol.

Bioleaching of zinc from gold ores using Acidithiobacillus ferrooxidans

The present work investigated microbial leaching of zinc from ore using Acidithiobacillus ferrooxidans （ATCC 14859）. The ore samples, consisted of 13wt% zinc, were obtained from a gold mine in north-eastern Thailand. A shake flask study was performed on the ore samples using a rotary shaker under the following fixed conditions （250 r·min^-1, 30℃ for 16 d）. The influence of various conditions, namely medium type （with and without iron）, particle ore size （〈20, 20-40, 40-60, 60-100, and 〉100 mesh）, ore density （20 kg·m^-3, 50 kg·m^-3, and 100 kg·m^-3）, and pH of the medium （2, 2.5, 2.8, and 3）, were investigated. The microbial leaching was assessed by determining the concentration of zinc in the medium and compared with the initial sample concentration. The results show that Acidithiobacillus ferrooxidans can successfully leach zinc by as much as 6 times compared with the control experiment （without Acidithiobacillus ferrooxidans ferrooxidans）. The maximum efficiency （92.3%） for microbial leaching is obtained in iron-containing medium, 20-40 mesh ore sizes, 20 kg·m^-3 ore density at pH 2.8, and the zinc content is found in the medium at about 120 mg·m^-1.

Recovery of gold from refractory gold ores: Effect of pyrite on the stability of the thiourea leaching system

The extraction of gold from refractory gold ores(RGOs)without side reactions is an extremely promising endeavor.However,most RGOs contain large amounts of sulfide,such as pyrite.Thus,investigation of the influence of sulfide on the gold leaching process is important to maximize the utilization of RGOs.In this work,the effects of pyrite on the stability of the thiourea system were systematically investigated under different conditions.Results showed that the decomposition rate of thiourea was accelerated sharply in the presence of pyrite.The effect of pyrite on gold recovery in thiourea leaching systems was then confirmed via a series of experiments.The decomposition efficiency of thiourea decreased by 40%and the recovery efficiency of gold increased by 56%after the removal of sulfide by roasting.Under optimal conditions,the efficiency of the gold recovery system increased to 83.69%and only 57.92%of thiourea decomposition was observed.The high consumption of thiourea by the leaching system may be attributed to not only adsorption by mineral particles but also catalytic decomposition by some impurities in the ores,such as pyrite and soluble ferric oxide.

Research on Technology of Pressure Pretreatment with Oxygen for Refractory Gold Ores

An combined technology of pressure pretreatment with oxygen on refractory gold ores is pointed out and discussed on this paper, according to the experiments included the test in 1 kg grade batch pressure pretreatment with oxygen of the concentrate from the refractory gold ores of Dongbeizhai in Sichuan province, which is called the most refractory gold ores in China. It is shown that gold recovery reach 91.73% in the combined process which is described as follows: The flotation of the sulphide gold ores is under controlled conditions, producing the concentrate for pressure pretreatment with oxygen in acidic medium and the middling for the pressure pretreatment with oxygen in alkaline medium. The thickening and washing process substitute the pressure filtration process of the pulp after pressure pretreatment. The thick slimes of the two kinds of pressure pretreatment were mixed and then enter the CIL process for simplifying the flowsheet. The possible superabundance of acid of pressure pretreatment with oxygen in acidic medium was neutralized by the tailings of flotation and the cost of neutralization will be lower. The combined technology of pressure pretreatment with oxygen has the same advantages as the normal technology of pressure pretreatment and both is helpful for environment protection.

Pretreatment of copper-bearing refractory gold ores by bio-heap leaching

The refractory gold ores associated with rich copper and trapped in pyrite and quartz were studied. With conventional technique （all-sliming cyanidation）, the gold recovery rate is only 51.78%. To eliminate the negative effects of copper and pyrite on cyanidation and increase the gold recovery rate, the investigation on bio-heap leaching pretreatment was made, by which Cu would be dissolved and gold would be liberated from pyrite. The experiment adopted mixed bacteria, mainly ThiobaciUus ferrooxidan （named T.fl ）, as the bacterial catalyst for bio-preconditioning and was carried out in a PVC column with a diameter of 20 cm and a height of 1.3 m loaded with gold ores. The temperature was controlled between 28 and 30℃, the pH value was kept between 2.0-2.5, and the flux of sprinkling bacterial liquid was maintained 0.80 L/h. After 45-day＇s bio-oxidization, among the samples sizing from 0 to 5 mm, the oxidation rates of Cu, Fe and S were respectively 44.62%, 28.16% and 25.46%, and the gold recovery rate by cyaniding increased to 80.35%. The bio-heap leaching pretreatment can therefore effectively dissolve Cu and liberate gold from pyrite and lead to the increase of gold extraction.

Geological Characteristics and Regional Prospecting Model of Wulanchongji Gold Orebody, Alxa Youqi, Inner Mongolia, China

Five gold deposits (mineralization) were found in the study area by means of geological mapping, soil geochemical survey and trough exploration engineering. The ore-bearing lithology is mainly metamorphic feldspar sandstone of the Upper Carboniferous Benbatu Formation, and the gold (mineralization) body is controlled by both structural factors and stratigraphic factors of the Upper Carboniferous Benbatu Formation. The genetic type is preliminary concluded to be volcanic hydrothermal type, and the metallogenic age is late Variscan. In this paper, by studying the geological characteristics and metallogenic geological conditions of the gold orebody in the area, a regional prospecting model has been established, which is of great significance to better guide the prospecting work of similar gold deposits in the area and the region.

Effectiveness of Gravity Separation of Low Grade Nigerian Gold Ore Using Shaking Table

The response of Imogbara (Nigeria) gold ore to shaking tabling gravity separation methods was investigated in this research work. Gold concentration in run-off mines is usually as low as 0.005 ppm and must be upgraded in order to reduce the recovery process extraction costs. Gravity separation method (the focus of this work) is one of the readily affordable beneficiation methods. Shaking table is a developed separation equipment of gravity method that has been adopted to increase concentrate based on difference of specific gravity. The output result of the concentration process using shaking table is basically influenced by a number of variables, such as rotational shaking speed, particle size and deck slope. In this research, the range of rotational speed shaking was between 100 rpm and 200 rpm, the particle size was between (−300 μm > X −75 μm) and deck slope was between 10°and 30°. EDXRF was used to measure gold concentration in the concentrate as well as the tailings. The result shows that the optimum condition is obtained at a shaking speed of 100 rpm, with a slope of 10°and particle size less than 75 μm.

Beneficiation of the gold bearing ore by gravity and flotation

Gold concentration usually consists of gravity separation, flotation, cyanidation, or the combination of these processes. The choice among these processes depends on the mineralogical characterization and gold content of the ore. Recently, the recovery of gold using gravity methods has gained attention because of low cost and environmentally friendly operations. In this study, gold pre-concentrates were produced by the stepwise gravity separation and flotation techniques. The Knelson concentrator and conventional flotation were employed for the recovery of gold. Gold bearing ore samples were taken from Gümüshane Region, northern east part of Turkey. As a result of stepwise Knelson concentration experiments, a gold concentrate assaying around 620 g/t is produced with 41.4wt% recovery. On the other hand, a gold concentrate about 82 g/t is obtained with 89.9wt% recovery from a gold ore assaying 6 g/t Au by direct flotation.

On the Mechanism of Transformation fromPrimary Ores into Oxidized Ores in FinelyDisseminated Gold Deposits

This paper, taking the finely disseminated gold deposits in southwestern Guizhou and northwestern Guangxi as examples, discusses the difference between the occurrence of primary ores and that of oxidized ores, analyzes the occurrence mechanism in terms of crystallochemistry and geochemistry, and especially studies the chemical model for supergene leaching transformation of clay minerals in the two types of ores. This study proposes a new idea for dressing and smelting technology for primary gold ores.

Roasting and chlorine leaching of gold-bearing refractory concentrate:Experimental and process analysis

This paper deals with gold extraction from a refractory concentrate by chlorine leaching.The process considers a pre-treatment of refractory materials by low temperature oxidation carried out with low oxygen concentration.The oxidized material is treated by leaching with brine.After gold adsorption/reduction onto activated carbon,iron and base metals can be precipitated by NaOH.Roasting tests show the necessity to carry out a thermal pre-treatment at least at 550°C to obtain a reduction of sulfur and mercury in the material(50%and 90%,respectively).Highest gold extraction yield(around 93%)is obtained in the leaching test performed with material sample treated at 650°C.This result confrms the necessity to optimize the thermal pre-treatment to improve Au recovery and to reduce chlorine consumption.A comparison with conventional cyanidation confrms that chlorination could be an useful alternative:in fact,gold extraction yield is quite low:57%in non-pre-treated material and 25%in pre-treatment material.

Geology and mineralization of the Pulang supergiant porphyry copper deposit(5.11 Mt)in Shangri-la,Yunnan Province,China:A review

The porphyry copper belt in the Geza island arc in southwestern China is the only Indosinian porphyry copper metallogenic belt that has been discovered and evaluated so far.The Pulang porphyry copper deposit(also referred to as the Pulang deposit)in this area has proven copper reserves of 5.11×106 t.This deposit has been exploited on a large scale using advanced mining methods,exhibiting substantial economic benefit.Based on many research results of previous researchers and the authors’team,this study proposed the following key insights.(1)The Geza island arc was once regarded as an immature island arc with only andesites and quartz diorite porphyrites occurring.This understanding was overturned in this study.Acidic endmember components such as quartz monzonite porphyries and quartz monzonite porphyries have been identified in the Geza island arc,and the mineralization is mainly related to the magmatism of quartz monzonite porphyries.(2)Complete porphyry orebodies and large vein orebodies have developed in the Pulang deposit.Main orebody KT1 occurs in the transition area between the potassium silicate alteration zone of quartz monzonite porphyries and the sericite-quartz alteration zone.Most of them have developed in the potassium silicate alteration zone.The main orebody occurs as large lenses at the top of the hanging wall of rock bodies,with an engineering-controlled length of 1920 m and thickness of 32.5‒630.29 m(average:187.07 m).It has a copper grade of 0.21%-1.56%(average:0.42%)and proven copper resources of 5.11×10^(6) t,which are associated with 113 t of gold,1459 t of silver,and 170×10^(3) t of molybdenum.(3)Many studies on diagenetic and metallogenic chronology,isotopes,and fluid inclusions have been carried out for the Pulang deposit,including K-Ar/Ar-Ar dating of monominerals(e.g.,potassium feldspars,biotites,and amphiboles),zircon U-Pb dating,and molybdenite Re-Os dating.The results show that the porphyries in the Pulang deposit are composite plutons and can be classified into pre-mineralization quartz diorite porphyrites,quartz monzonite porphyries formed during the mineralization,and post-mineralization granite porphyries,which were formed at 223±3.7 Ma,218±4 Ma,and 207±3.9 Ma,respectively.The metallogenic age of the Pulang deposit is 213‒216 Ma.(4)The petrogeochemical characteristics show that the Pulang deposit has the characteristics of volcanic arc granites.The calculation results of trace element contents in zircons show that quartz monzonite porphyries and granite porphyries have higher oxygen fugacity.The isotopic tracing results show that the diagenetic and metallogenic materials were derived from mixed crust-and mantle-derived magmas.

Behavior Mechanism on Sulfide Solid-Liquid Interface and Its Application

Ｓｕｒｆａｃｅｍｉｎｅｒａｌｏｇｙｉｓｏｎｅｏｆｔｈｅｍｏｄｅｒｎｂｒａｎｃｈｅｓｏｆｍｉｎ－ｅｒａｌｏｇｙ．Ｔｈｅｒｅｓｅａｒｃｈｏｆｔｈｅｉｎｔｅｒｆａｃｅｏｆｍｉｎｅｒａｌ－ｌｉｑｕｉｄ，ｎａｍｅｌｙｔｈｅｓｔｕｄｙｏｎｔｈｅｒｅａｃｔｉｏｎｏ...

Improving gold recovery of Pb–Zn sulfide ore by selective activation with organic acid

Free gold and gold wrapped in sulfides are considered as the object of gold floatation. However,floatation of free gold exhibits more variables in practice.In this study, improving gold recovery of a Pb-Zn sulfide ore from Yunnan Province, China, was investigated. The results show that free gold and auriferous sulfides account for 94.99 % of total gold. Without adding organic acid in floatation, only 82 % recovery of gold could be obtained.Gold recovery in Au/Pb concentrates increases by 9.29 %with oxalate added and by 7.35 % with citric acid added,respectively, while performances of lead and arsenic nearly keep a constant. A possible reason is that free gold is of wonderful selectivity against pyrite with organic activators.A new method to enhance gold recovery is proposed.