Graded composition and doping p-i-n Al_(x)Ga_(1−x)As/GaAs detector for unbiased voltage operation

p-i-n Al_(x)Ga_(1−x)As/GaAs detectors with graded compositions and graded doping were grown and prepared.From the current-voltage and capacitance-voltage measurement results,the devices had good p-n junction diode characteristics,and the electric field strength under an unbiased voltage was 1.7×10^(5) Vcm^(-1).The full width at half maximum and charge collection efficiency of the detectors obtained from energy spectrum measurements of 5.48-MeV alpha particles were 3.04 and approximately 93%,respectively.In this study,we created the most advanced and promising state-of-the-art unbiased detector reported to date.

Thermal transport in composition graded silicene/germanene heterostructures

Through equilibrium and non-equilibrium molecular dynamics simulations,we have demonstrated the inhibitory effect of composition graded interface on thermal transport behavior in lateral heterostructures.Specifically,we investigated the influence of composition gradient length and heterogeneous particles at the silicene/germanene(SIL/GER)heterostructure interface on heat conduction.Our results indicate that composition graded interface at the interface diminishes the thermal conductivity of the heterostructure,with a further reduction observed as the length increases,while the effect of the heterogeneous particles can be considered negligible.To unveil the influence of composition graded interface on thermal transport,we conducted phonon analysis and identified the presence of phonon localization within the interface composition graded region.Through these analyses,we have determined that the decrease in thermal conductivity is correlated with phonon localization within the heterostructure,where a stronger degree of phonon localization signifies poorer thermal conductivity in the material.Our research findings not only contribute to understanding the impact of interface gradient-induced phonon localization on thermal transport but also offer insights into the modulation of thermal conductivity in heterostructures.

Thermoelectric properties of p-type Bi-Sb-Te compositionally graded thermoelectric materials with different barriers

In order to find more suitable materials as barriers and to improve the thermoelectric properties, p-type (Bi1-xSbx) 2Te3 (x = 0.85, 0.9) two segments compositionally graded thermoelectric materials (CGTM) with different barriers were fabricated by conventional hot pressure method. Metals Fe, Co, Cu and Al were used as barriers between two segments. The effects of different barriers on thermoelectric properties of CGTM were investigated. The results show that metal Fe is more stable and suitable as the barrier.

On Co-precipation Fabrication of Continuously Graded Composites

The manner by which the particles settle in the laminar flow region is first described and the characteristics of co sedimentation of two species particles are summarized.The subsequent introduction is focused on the fabrication process of continuously graded composites using co sedimentation technique.Finally,the authors point out the key problem that should be solved immediately,based on their current work.

Nonlinear vibration of functionally graded graphene platelet-reinforced composite truncated conical shell using first-order shear deformation theory

In this study,the first-order shear deformation theory(FSDT)is used to establish a nonlinear dynamic model for a conical shell truncated by a functionally graded graphene platelet-reinforced composite(FG-GPLRC).The vibration analyses of the FG-GPLRC truncated conical shell are presented.Considering the graphene platelets(GPLs)of the FG-GPLRC truncated conical shell with three different distribution patterns,the modified Halpin-Tsai model is used to calculate the effective Young’s modulus.Hamilton’s principle,the FSDT,and the von-Karman type nonlinear geometric relationships are used to derive a system of partial differential governing equations of the FG-GPLRC truncated conical shell.The Galerkin method is used to obtain the ordinary differential equations of the truncated conical shell.Then,the analytical nonlinear frequencies of the FG-GPLRC truncated conical shell are solved by the harmonic balance method.The effects of the weight fraction and distribution pattern of the GPLs,the ratio of the length to the radius as well as the ratio of the radius to the thickness of the FG-GPLRC truncated conical shell on the nonlinear natural frequency characteristics are discussed.This study culminates in the discovery of the periodic motion and chaotic motion of the FG-GPLRC truncated conical shell.

Love Waves in Layered Graded Composite Structures with Imperfectly Bonded Interface

Theoretical analysis and numerical calculations of Love wave propagation in layered graded composites with imperfectly bonded interface are described in this paper. On the basis of WKB method, the approximate analytic solutions for Love waves are obtained. By the interface shear spring model, the dispersion relations for Love waves in layered graded composite structures with rigid, slip, and imperfectly bonded interfaces are given, and the effects of the interface conditions on the phase velocities of Love waves in SiC/Al layered graded composites are discussed. Numerical analysis shows that the phase velocity decreases when the defined flexibility parameter is greater. For the general imperfectly bonded interface, the phase velocity changes in the range of the velocities for the rigid and slip interface conditions.

In-Situ Synthesis and Characteristics of TiC-Fe Cermet Graded Composite Coating on a Steel Substrate

By means of an inherent elevated-temperature of poured liquid steel,a Ti-C-30wt%Fe preform,which was pre-placed in a mould cavity,was directly ignited and a combustion synthesis reaction took place.As a result,a TiC-Fe cermet coating with a thickness of about 10mm was simultaneously synthesized on the solidified steel matrix.The synthesized coating exhibits a feature of graded composite structure,in which both the amount and size of TiC particles decrease gradually with an increasing distance from the furface of the coating.Moreover,by a proper casting technique,the pores formed during the combustion synthesis of the preform could be centrally distributed in 2-3mm in outer layer of the coating.When this outer porous layer was worn off,the rest coating with a thickness of about 8mm possesses a dense structure and a high abrasive wear resistance.

Isogeometric nonlocal strain gradient quasi-three-dimensional plate model for thermal postbuckling of porous functionally graded microplates with central cutout with different shapes

This study presents the size-dependent nonlinear thermal postbuckling characteristics of a porous functionally graded material(PFGM) microplate with a central cutout with various shapes using isogeometric numerical technique incorporating nonuniform rational B-splines. To construct the proposed non-classical plate model, the nonlocal strain gradient continuum elasticity is adopted on the basis of a hybrid quasithree-dimensional(3D) plate theory under through-thickness deformation conditions by only four variables. By taking a refined power-law function into account in conjunction with the Touloukian scheme, the temperature-porosity-dependent material properties are extracted. With the aid of the assembled isogeometric-based finite element formulations,nonlocal strain gradient thermal postbuckling curves are acquired for various boundary conditions as well as geometrical and material parameters. It is portrayed that for both size dependency types, by going deeper in the thermal postbuckling domain, gaps among equilibrium curves associated with various small scale parameter values get lower, which indicates that the pronounce of size effects reduces by going deeper in the thermal postbuckling regime. Moreover, we observe that the central cutout effect on the temperature rise associated with the thermal postbuckling behavior in the presence of the effect of strain gradient size and absence of nonlocality is stronger compared with the case including nonlocality in absence of the strain gradient small scale effect.

Electric field distribution and effective nonlinear AC and DC responses of graded cylindrical composites

The perturbation method is used to study the localization of electric field distribution and the effective nonlinear response of graded composites under an external alternating-current（AC） and direct-current（DC） electric field E app = E 0（1 ＋ sin ωt）.The dielectric profile of the cylindrical inclusions is modeled by function ε i（r） = C k r k（r ≤ a）,where r is the radius of the cylindrical inclusion,and C k,k,a are parameters.In the dilute limit,the local potentials and the effective nonlinear responses at all harmonics are derived.Meanwhile,the general effective nonlinear responses are also derived and compared with the effective nonlinear responses at harmonics under the AC and DC external field.It is found that the effective nonlinear AC and DC responses at harmonics can be calculated by those of the general effective nonlinear of the graded composites under the external DC electric field.Moreover,the obtained local electrical fields show that the electrical field distribution in the cylindrical inclusions is controllable,and the maximum of the electric field inside the cylinder is at its center.

In-situ fabrication of Al(Zn)-Al_2O_3 graded composite using the aluminothermic reaction during hot pressing

In INs study, the fabrication of multilayer AI（Zn）-A1203 with different volume fractions of A1203 was investigated. A1 and ZnO powders were milled by a plaaetaxy ball mill, after which five-layer functionally graded samples were produced flarough hot pressing at 580~C and 90 MPa pressure for 30 min. Formation of reinforcing A1203 particles occurred in the aluminum matrix via the aluminolkermic reaction. Determination of the ignition temperature of the aluminolkennic reaction was accomplished using differential lkermal and lkermo- gravimelric amlyses. Scaaming electron microscopy, energy dispersive spectroscopy, and X-ray diffractometery amlyses were utilized to characterize the specimens. The lkermal amlysis results showed that the ignition temperatures for the aluminolkennic reaction of layers with the highest and lowest ZnO contents were 667 and 670~C, respectively. Microslxuctural observation and chemical amlysis confirmed the fa- brication of AI（Zn）-A1203 functionally graded materials composites with precipitation of additional Zn in the matrix. Moreover, nearly dense functionally graded samples demonstrated minimum and maximum hacdness values of HV 75 and HV 130, respectively.

Enhanced optical nonlinear absorption of graded Au-TiO_2 composite films

This paper reports that single-layer and graded Au-TiO2 granular composite films with Au atom content 15%- 66% were prepared by using reactive co-sputtering technique. The third-order optical nonlinearity of single-layer and graded composite films was investigated by using s- and p-polarized Z-scans in femtosecond time scale. The nonlinear absorption coefficient βeff of single-layer Au-TiO2 films is measured to be -2.3×10^3-0.76×10^3 cm/GW with Au atom content 15%-66%. The βeff value of the 10-layer Au-TiO2 graded film is enhanced to be -2.1×10^4cm/GW calculated from p-polarized Z-scans, which is about ten times the maximum βeff of single-layer films. Broadened response in the wavelength region 730-860 nm of the enhanced optical nonlinearity of graded Au-TiO2 composite films was also investigated.

Crack Propagation Path in Two-Directionally Graded Composites Subjected to Mixed-Mode Ⅰ+Ⅱ Loading

Crack propagation path in two-directionally graded composites was investigated by the finite element method.A graded extended finite element method(XFEM)was employed to calculate displacement and stress fields in cracked graded structures.And a post-processing subroutine of interaction energy integral was implemented to extract the mixed-mode stress intensity factors(SIFs).The maximum hoop stress(MHS)criterion was adopted to predict crack growth direction based on the assumption of local homogenization of asymptotic crack-tip fields in graded materials.Effects of material nonhomogeneous parameters on crack propagation paths were also discussed in detail.It is shown that the present method can provide relatively accurate predictions of crack paths in two-directionally graded composites.Crack propagates in the decreasing direction of effective Young′s modulus.The shape and steepness of property gradient perpendicular to the crack surface have great influences on crack paths.Through redesigning material property reasonably,crack growth in graded material can be changed to improve mechanical behaviours of cracked structures.

Dielectric responses of graded composites having generalized gradation profiles

Under an external uniform electric field, the dielectric response of graded cylindrical composites having generalized dielectric profile inclusions is investigated. The generalized dielectric profile of graded cylindrical inclusion is expressed in the form, εi（r） = c（b ＋ r）^keβr where r is the radial variable of the cylindrical inclusions and c, b, k and β are parameters. The local potential solution of generalized dielectric profile graded composites is derived by means of the power series method and the effective dielectric response is predicted in the dilute limit. Moreover, from the result of generalized profile, the analytical solutions of local potentials and the effective responses of graded composites having three cases of dielectric profiles, i.e., the exponential profile εi（r） = ce^βr, the general power law profile εi（r） = c（b ＋ r）^k and the profile εi（r） = cr^keβr, are sorted out, respectively. In the dilute limit, our exact results are used to test the validity of differential effective dipole approximation （DEDA） for estimating the effective response of graded cylindrical composites, and it is shown that the DEDA is in excellent agreement with the exact result.

Vibration characteristics of piezoelectric functionally graded carbon nanotube-reinforced composite doubly-curved shells

This paper presents an analytical solution for the free vibration behavior of functionally graded carbon nanotube-reinforced composite(FG-CNTRC) doubly curved shallow shells with integrated piezoelectric layers. Here, the linear distribution of electric potential across the thickness of the piezoelectric layer and five different types of carbon nanotube(CNT) distributions through the thickness direction are considered. Based on the four-variable shear deformation refined shell theory, governing equations are obtained by applying Hamilton's principle. Navier's solution for the shell panels with the simply supported boundary condition at all four edges is derived. Several numerical examples validate the accuracy of the presented solution. New parametric studies regarding the effects of different material properties, shell geometric parameters, and electrical boundary conditions on the free vibration responses of the hybrid panels are investigated and discussed in detail.

The effect of initial geometric imperfection on the nonlinear resonance of functionally graded carbon nanotube-reinforced composite rectangular plates

The purpose of the present study is to examine the impact of initial geometric imperfection on the nonlinear dynamical characteristics of functionally graded carbon nanotube-reinforced composite(FG-CNTRC) rectangular plates under a harmonic excitation transverse load. The considered plate is assumed to be made of matrix and single-walled carbon nanotubes(SWCNTs). The rule of mixture is employed to calculate the effective material properties of the plate. Within the framework of the parabolic shear deformation plate theory with taking the influence of transverse shear deformation and rotary inertia into account, Hamilton’s principle is utilized to derive the geometrically nonlinear mathematical formulation including the governing equations and corresponding boundary conditions of initially imperfect FG-CNTRC plates. Afterwards, with the aid of an efficient multistep numerical solution methodology, the frequency-amplitude and forcing-amplitude curves of initially imperfect FG-CNTRC rectangular plates with various edge conditions are provided, demonstrating the influence of initial imperfection,geometrical parameters, and edge conditions. It is displayed that an increase in the initial geometric imperfection intensifies the softening-type behavior of system, while no softening behavior can be found in the frequency-amplitude curve of a perfect plate.

Couple stress-based nonlinear primary resonant dynamics of FGM composite truncated conical microshells integrated with magnetostrictive layers

The size-dependent geometrically nonlinear harmonically soft excited oscillation of composite truncated conical microshells(CTCMs)made of functionally graded materials(FGMs)integrated with magnetostrictive layers is analyzed.It is supposed that the FGM CTCMs are subjected to mechanical soft excitations together with external magnetic fields.An analytical framework is created by a microstructuredependent shell model having the 3rd-order distribution of shear deformation based on the modified couple stress(MCS)continuum elasticity.With the aid of the discretized form of differential operators developed via the generalized differential quadrature technique,a numerical solution methodology is introduced for obtaining the couple stress-based amplitude and frequency responses related to the primary resonant dynamics of the FGM CTCMs.Jump phenomena due to the loss of the first stability branch and falling down to the lower stable branch can be seen in the nonlinear primary resonance of the FGM CTCMs.It is demonstrated that the hardening type of nonlinearity results in bending the frequency response to the right side,and the MCS type of size effect weakens this pattern.Moreover,for higher material gradient indexes,the hardening type of nonlinearity is enhanced,and the MCS-based frequency response bends more considerably to the right side.

Lateral composition-graded semiconductor nanoribbons for multi-color nanolasers

Low-dimensional semiconductor nanostructures have attracted much interest for applications in integrated photonic and optoelectronic devices. Band gap engineering within single semiconductor nanoribbons helps to manipulate photon behavior in two different cavities （in the width and length directions） and realize new photonic phenomena and applications. In this work, lateral composition-graded semiconductor nanoribbons were grown for the first time through an improved source-moving vapor phase route. Along the width of the nanoribbon, the material can be gradually tuned from pure CdS to a highly Se-doped CdSSe alloy with a corresponding band gap modulation from 2.42 to 1.94 eV. The achieved alloy ribbons are overall high-quality crystals, and the position-dependent band-edge photoluminescence （PL） emission had a peak wavelength continuously tuned from -515 to -640 nm. These ribbons can realize multi-color lasing with three groups of lasing modes centered at 519, 557, and 623 run. It was confirmed that the red lasing was from optical resonance along the length direction, while the green and yellow lasing was from optical resonance along the width direction. These novel nanoribbon structures may be applied to many integrated photonic and optoelectronic devices.

High-efficient electron collection capability of graded Al compositional GaN nanowire arrays cathode

Based on the purpose of solving the"secondary absorption"of adjacent nanowires and the lateral emission in the Ga N nanowire arrays(NWAs)cathode,an exponential-doping and graded Al compositional Ga N NWAs photocathode is proposed,which could generate internal electric field to increase the quantum efficiency(QE)of top surface,and the introduction of an external electric field promote the side-emission electrons to shift toward the collecting side.The QE and collection efficiency(CE)of exponential-doping and graded compositional Ga N NWAs under different array structure parameters,incident angles and external electric field intensities are analyzed.The results show that although the collection ratio of emitted electrons in the exponential-doping Ga N NWAs is higher,the graded Al compositional photocathode with a stronger built-in electric field can obtain better CE under the application of an external electric field,and the peak value can reach 33.2%in a specific structure.External electric field has a more significant effect on the CE of uniform-doping Ga N NWAs.The solutions provided in this study can make the Ga N NWAs photocathode more suitable for the strict requirements of vacuum electron sources.

Optimization of Mechanical and Wear Properties of Functionally Graded Al6061/SiC Nanocomposites Produced by Friction Stir Processing(FSP)

The objective of present work is to apply the friction stir processing （FSP） to fabricate functionally graded SiC particulate reinforced Al6061 composite and investigate the effect of SiC particle mass fraction distribution on the mechanical properties and wear behavior ofAl6061/SiC composite. Regarding the obtained results in this work, with increasing SiC mass fraction, elongation decreased, but hardness enhanced. However, the optimized functionally graded composite with the highest tensile strength and wear resistance was achieved for composite with 10 wt% surface SiC. Also, the results showed that wear resistance and tensile strength decreased for composite with 13 wt% surface SiC, due to reinforcement particle clustering depending on high SiC mass fraction.

A deep feed-forward neural network for damage detection in functionally graded carbon nanotube-reinforced composite plates using modal kinetic energy

This paper proposes a new Deep Feed-forward Neural Network(DFNN)approach for damage detection in functionally graded carbon nanotube-reinforced composite(FG-CNTRC)plates.In the proposed approach,the DFNN model is developed based on a data set containing 20000 samples of damage scenarios,obtained via finite element(FE)simulation,of the FG-CNTRC plates.The elemental modal kinetic energy(MKE)values,calculated from natural frequencies and translational nodal displacements of the structures,are utilized as input of the DFNN model while the damage locations and corresponding severities are considered as output.The state-of-the art Exponential Linear Units(ELU)activation function and the Adamax algorithm are employed to train the DFNN model.Additionally,in order to enhance the performance of the DFNN model,the mini-batch and early-stopping techniques are applied to the training process.A trial-and-error procedure is implemented to determine suitable parameters of the network such as the number of hidden layers and the number of neurons in each layer.The accuracy and capability of the proposed DFNN model are illustrated through two distinct configurations of the CNT-fibers constituting the FG-CNTRC plates including uniform distribution(UD)and functionally graded-V distribution(FG-VD).Furthermore,the performance and stability of the DFNN model with the consideration of noise effects on the input data are also investigated.Obtained results indicate that the proposed DFNN model is able to give sufficiently accurate damage detection outcomes for the FG-CNTRC plates for both cases of noise-free and noise-influenced data.