Thermal transport in composition graded silicene/germanene heterostructures

Through equilibrium and non-equilibrium molecular dynamics simulations,we have demonstrated the inhibitory effect of composition graded interface on thermal transport behavior in lateral heterostructures.Specifically,we investigated the influence of composition gradient length and heterogeneous particles at the silicene/germanene(SIL/GER)heterostructure interface on heat conduction.Our results indicate that composition graded interface at the interface diminishes the thermal conductivity of the heterostructure,with a further reduction observed as the length increases,while the effect of the heterogeneous particles can be considered negligible.To unveil the influence of composition graded interface on thermal transport,we conducted phonon analysis and identified the presence of phonon localization within the interface composition graded region.Through these analyses,we have determined that the decrease in thermal conductivity is correlated with phonon localization within the heterostructure,where a stronger degree of phonon localization signifies poorer thermal conductivity in the material.Our research findings not only contribute to understanding the impact of interface gradient-induced phonon localization on thermal transport but also offer insights into the modulation of thermal conductivity in heterostructures.

Tree‑Inspired Structurally Graded Aerogel with Synergistic Water,Salt,and Thermal Transport for High‑Salinity Solar‑Powered Evaporation

Solar-powered interfacial evaporation is an energy-efficient solution for water scarcity.It requires solar absorbers to facilitate upward water transport and limit the heat to the surface for efficient evaporation.Furthermore,downward salt ion transport is also desired to prevent salt accumulation.However,achieving simultaneously fast water uptake,downward salt transport,and heat localization is challenging due to highly coupled water,mass,and thermal transport.Here,we develop a structurally graded aerogel inspired by tree transport systems to collectively optimize water,salt,and thermal transport.The arched aerogel features root-like,fan-shaped microchannels for rapid water uptake and downward salt diffusion,and horizontally aligned pores near the surface for heat localization through maximizing solar absorption and minimizing conductive heat loss.These structural characteristics gave rise to consistent evaporation rates of 2.09 kg m^(-2) h^(-1) under one-sun illumination in a 3.5 wt%NaCl solution for 7 days without degradation.Even in a high-salinity solution of 20 wt%NaCl,the evaporation rates maintained stable at 1.94 kg m^(-2) h^(-1) for 8 h without salt crystal formation.This work offers a novel microstructural design to address the complex interplay of water,salt,and thermal transport.

Numerical Analysis of Permeability of Functionally Graded Scaffolds

In this work,we numerically study the hydrodynamic permeability of new-generation artificial porous materials used as scaffolds for cell growth in a perfusion bioreactor.We consider two popular solid matrix designs based on triply periodic minimal surfaces,the Schwarz P(primitive)and D(diamond)surfaces,which enable the creation of materials with controlled porosity gradients.The latter property is crucial for regulating the shear stress field in the pores of the scaffold,which makes it possible to control the intensity of cell growth.The permeability of functionally graded materials is studied within the framework of both a microscopic approach based on the Navier-Stokes equation and an averaged description of the liquid filtration through a porous medium based on the equations of the Darcy or Forchheimer models.We calculate the permeability coefficients for both types of solid matrices formed by Schwarz surfaces,study their properties concerning forward and reverse fluid flows,and determine the ranges of Reynolds number for which the description within the Darcy or Forchheimer model is applicable.Finally,we obtain a shear stress field that varies along the sample,demonstrating the ability to tune spatially the rate of tissue growth.

Parametric resonance of axially functionally graded pipes conveying pulsating fluid

Based on the generalized Hamilton's principle,the nonlinear governing equation of an axially functionally graded(AFG)pipe is established.The non-trivial equilibrium configuration is superposed by the modal functions of a simply supported beam.Via the direct multi-scale method,the response and stability boundary to the pulsating fluid velocity are solved analytically and verified by the differential quadrature element method(DQEM).The influence of Young's modulus gradient on the parametric resonance is investigated in the subcritical and supercritical regions.In general,the pipe in the supercritical region is more sensitive to the pulsating excitation.The nonlinearity changes from hard to soft,and the non-trivial equilibrium configuration introduces more frequency components to the vibration.Besides,the increasing Young's modulus gradient improves the critical pulsating flow velocity of the parametric resonance,and further enhances the stability of the system.In addition,when the temperature increases along the axial direction,reducing the gradient parameter can enhance the response asymmetry.This work further complements the theoretical analysis of pipes conveying pulsating fluid.

Dynamic Characteristics of Functionally Graded Timoshenko Beams by Improved Differential Quadrature Method

This study proposes an effective method to enhance the accuracy of the Differential Quadrature Method(DQM)for calculating the dynamic characteristics of functionally graded beams by improving the form of discrete node distribution.Firstly,based on the first-order shear deformation theory,the governing equation of free vibration of a functionally graded beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam axial displacement,transverse displacement,and cross-sectional rotation angle by considering the effects of shear deformation and rotational inertia of the beam cross-section.Then,ignoring the shear deformation of the beam section and only considering the effect of the rotational inertia of the section,the governing equation of the beam is transformed into the eigenvalue problem of ordinary differential equations with respect to beam transverse displacement.Based on the differential quadrature method theory,the eigenvalue problem of ordinary differential equations is transformed into the eigenvalue problem of standard generalized algebraic equations.Finally,the first several natural frequencies of the beam can be calculated.The feasibility and accuracy of the improved DQM are verified using the finite element method(FEM)and combined with the results of relevant literature.

Biomimetic MXene membranes with negatively thermo-responsive switchable 2D nanochannels for graded molecular sieving

Negatively thermo-responsive 2D membranes,which mimic the stomatal opening/closing of plants,have drawn substantial interest for tunable molecular separation processes.However,these membranes are still restricted significantly on account of low water permeability and poor dynamic tunability of 2D nanochannels under temperature stimulation.Here,we present a biomimetic negatively thermo-responsive MXene membrane by covalently grafting poly(N-isopropylacrylamide)(PNIPAm)onto MXene nanosheets.The uniformly grafted PNIPAm polymer chains can enlarge the interlayer spacings for increasing water permeability while also allowing more tunability of 2D nanochannels for enhancing the capability of gradually separating multiple molecules of different sizes.As expected,the constructed membrane exhibits ultrahigh water permeance of 95.6 L m^(-2) h^(-1) bar^(-1) at 25℃,which is eight-fold higher than the state-of-the-art negatively thermoresponsive 2D membranes.Moreover,the highly temperature-tunable 2D nanochannels enable the constructed membrane to perform excellent graded molecular sieving for dye-and antibiotic-based ternary mixtures.This strategy provides new perspectives in engineering smart 2D membrane and expands the scope of temperature-responsive membranes,showing promising applications in micro/nanofluidics and molecular separation.

A Hybrid Level Set Optimization Design Method of Functionally Graded Cellular Structures Considering Connectivity

With the continuous advancement in topology optimization and additive manufacturing(AM)technology,the capability to fabricate functionally graded materials and intricate cellular structures with spatially varying microstructures has grown significantly.However,a critical challenge is encountered in the design of these structures–the absence of robust interface connections between adjacent microstructures,potentially resulting in diminished efficiency or macroscopic failure.A Hybrid Level Set Method(HLSM)is proposed,specifically designed to enhance connectivity among non-uniform microstructures,contributing to the design of functionally graded cellular structures.The HLSM introduces a pioneering algorithm for effectively blending heterogeneous microstructure interfaces.Initially,an interpolation algorithm is presented to construct transition microstructures seamlessly connected on both sides.Subsequently,the algorithm enables the morphing of non-uniform unit cells to seamlessly adapt to interconnected adjacent microstructures.The method,seamlessly integrated into a multi-scale topology optimization framework using the level set method,exhibits its efficacy through numerical examples,showcasing its prowess in optimizing 2D and 3D functionally graded materials(FGM)and multi-scale topology optimization.In essence,the pressing issue of interface connections in complex structure design is not only addressed but also a robust methodology is introduced,substantiated by numerical evidence,advancing optimization capabilities in the realm of functionally graded materials and cellular structures.

Transfer matrix method for free and forced vibrations of multi-level functionally graded material stepped beams with different boundary conditions

Functionally graded materials(FGMs)are a novel class of composite materials that have attracted significant attention in the field of engineering due to their unique mechanical properties.This study aims to explore the dynamic behaviors of an FGM stepped beam with different boundary conditions based on an efficient solving method.Under the assumptions of the Euler-Bernoulli beam theory,the governing differential equations of an individual FGM beam are derived with Hamilton’s principle and decoupled via the separation-of-variable approach.Then,the free and forced vibrations of the FGM stepped beam are solved with the transfer matrix method(TMM).Two models,i.e.,a three-level FGM stepped beam and a five-level FGM stepped beam,are considered,and their natural frequencies and mode shapes are presented.To demonstrate the validity of the method in this paper,the simulation results by ABAQUS are also given.On this basis,the detailed parametric analyses on the frequencies and dynamic responses of the three-level FGM stepped beam are carried out.The results show the accuracy and efficiency of the TMM.

Exact solution for thermal vibration of multi-directional functionally graded porous plates submerged in fluid medium

An analytical method for analyzing the thermal vibration of multi-directional functionally graded porous rectangular plates in fluid media with novel porosity patterns is developed in this study.Mechanical properties of MFG porous plates change according to the length,width,and thickness directions for various materials and the porosity distribution which can be widely applied in many fields of engineering and defence technology.Especially,new porous rules that depend on spatial coordinates and grading indexes are proposed in the present work.Applying Hamilton's principle and the refined higher-order shear deformation plate theory,the governing equation of motion of an MFG porous rectangular plate in a fluid medium(the fluid-plate system)is obtained.The fluid velocity potential is derived from the boundary conditions of the fluid-plate system and is used to compute the extra mass.The GalerkinVlasov solution is used to solve and give natural frequencies of MFG porous plates with various boundary conditions in a fluid medium.The validity and reliability of the suggested method are confirmed by comparing numerical results of the present work with those from available works in the literature.The effects of different parameters on the thermal vibration response of MFG porous rectangular plates are studied in detail.These findings demonstrate that the behavior of the structure within a liquid medium differs significantly from that within a vacuum medium.Thereby,they offer appropriate operational approaches for the structure when employed in various mediums.

Free vibration and buckling analysis of polymeric composite beams reinforced by functionally graded bamboo fbers

Natural fibers have been extensively researched as reinforcement materials in polymers on account of their environmental and economic advantages in comparison with synthetic fibers in the recent years.Bamboo fibers are renowned for their good mechanical properties,abundance,and short cycle growth.As beams are one of the fundamental structural components and are susceptible to mechanical loads in engineering applications,this paper performs a study on the free vibration and buckling responses of bamboo fiber reinforced composite(BFRC)beams on the elastic foundation.Three different functionally graded(FG)layouts and a uniform one are the considered distributions for unidirectional long bamboo fibers across the thickness.The elastic properties of the composite are determined with the law of mixture.Employing Hamilton’s principle,the governing equations of motion are obtained.The generalized differential quadrature method(GDQM)is then applied to the equations to obtain the results.The achieved outcomes exhibit that the natural frequency and buckling load values vary as the fiber volume fractions and distributions,elastic foundation stiffness values,and boundary conditions(BCs)and slenderness ratio of the beam change.Furthermore,a comparative study is conducted between the derived analysis outcomes for BFRC and homogenous polymer beams to examine the effectiveness of bamboo fibers as reinforcement materials,demonstrating the significant enhancements in both vibration and buckling responses,with the exception of natural frequencies for cantilever beams on the Pasternak foundation with the FG-◇fiber distribution.Eventually,the obtained analysis results of BFRC beams are also compared with those for carbon nanotube reinforced composite(CNTRC)beams found in the literature,indicating that the buckling loads and natural frequencies of BFRC beams are lower than those of CNTRC beams.

Sound Transmission Loss Analysis of a Double Plate-Acoustic Cavity Coupling System with In-Plane Functionally Graded Materials

In this paper, the isogeometric analysis (IGA) is employed to develop an acoustic radiation model for a double plate-acoustic cavity coupling system, with a focus on analyzing the sound transmission loss (STL). The functionally graded (FG) plate exhibits a different material properties in-plane, and the power-law rule is adopted as the governing principle for material mixing. To validate the harmonic response and demonstrate the accuracy and convergence of the isogeometric modeling, ANASYS is utilized to compare with numerical examples. A plane wave serves as the acoustic excitation, and the Rayleigh integral is applied to discretize the radiated plate. The STL results are compared with the literature, confirming the reliability of the coupling system. Finally, the investigation is conducted to study impact of cavity depth and power-law parameter on the STL.

Functionally graded structure of a nitride-strengthened Mg_(2)Si-based hybrid composite

The ex-situ incorporation of the secondary SiC reinforcement,along with the in-situ incorporation of the tertiary and quaternary Mg_(3)N_(2) and Si_(3)N_(4) phases,in the primary matrix of Mg_(2)Si is employed in order to provide ultimate wear resistance based on the laser-irradiation-induced inclusion of N_(2) gas during laser powder bed fusion.This is substantialized based on both the thermal diffusion-and chemical reactionbased metallurgy of the Mg_(2)Si–SiC/nitride hybrid composite.This study also proposes a functional platform for systematically modulating a functionally graded structure and modeling build-direction-dependent architectonics during additive manufacturing.This strategy enables the development of a compositional gradient from the center to the edge of each melt pool of the Mg_(2)Si–SiC/nitride hybrid composite.Consequently,the coefficient of friction of the hybrid composite exhibits a 309.3%decrease to–1.67 compared to–0.54 for the conventional nonreinforced Mg_(2)Si structure,while the tensile strength exhibits a 171.3%increase to 831.5 MPa compared to 485.3 MPa for the conventional structure.This outstanding mechanical behavior is due to the(1)the complementary and synergistic reinforcement effects of the SiC and nitride compounds,each of which possesses an intrinsically high hardness,and(2)the strong adhesion of these compounds to the Mg_(2)Si matrix despite their small sizes and low concentrations.

Size-dependent thermomechanical vibration characteristics of rotating pre-twisted functionally graded shear deformable microbeams

A three-dimensional(3D)thermomechanical vibration model is developed for rotating pre-twisted functionally graded(FG)microbeams according to the refined shear deformation theory(RSDT)and the modified couple stress theory(MCST).The material properties are assumed to follow a power-law distribution along the chordwise direction.The model introduces one axial stretching variable and four transverse deflection variables including two pure bending components and two pure shear ones.The complex modal analysis and assumed mode methods are used to solve the governing equations of motion under different boundary conditions(BCs).Several examples are presented to verify the effectiveness of the developed model.By coupling the slenderness ratio,gradient index,rotation speed,and size effect with the pre-twisted angle,the effects of these factors on the thermomechanical vibration of the microbeam with different BCs are investigated.It is found that with the increase in the pre-twisted angle,the critical slenderness ratio and gradient index corresponding to the thermal instability of the microbeam increase,while the critical material length scale parameter(MLSP)and rotation speed decrease.The sensitivity of the fundamental frequency to temperature increases with the increasing slenderness ratio and gradient index,and decreases with the other increasing parameters.Moreover,the size effect can suppress the dynamic stiffening effect and enhance the Coriolis effect.Finally,the mode transition is quantitatively demonstrated by a modal assurance criterion(MAC).

热敏灸治疗颈型颈椎病的Meta分析及GRADE证据等级评价

目的系统评价热敏灸及其综合疗法用于颈型颈椎病的临床效果,为热敏灸治疗颈型颈椎病提供更好的证据来源。方法收集国内外各大数据库热敏灸及其综合疗法用于颈型颈椎病的随机对照试验(RCT),通过Revman 5.3软件进行Meta分析,按照GRADE标准对结局指标进行证据质量评价。结果纳入9篇文献共855例患者,Meta分析结果提示:热敏灸及其综合疗法组在提高总有效率(RR=1.19,P<0.01)和治愈率(RR=1.73,P<0.01)、降低视觉模拟量表(VAS)评分(SMD=-0.73,P<0.01)、简化McGill疼痛问卷(SF-MPQ)评分(SMD=-1.28,P<0.05)以及NPQ颈痛量表评分(SMD=-0.81,P<0.05)方面都优于对照组;GRADE证据等级评价提示:前三者为低质量证据,后二者为极低质量证据。结论热敏灸及其综合疗法用于颈型颈椎病在提高临床效果、镇痛以及改善患者生活质量方面更具优势。

Symplectic analysis for regulating wave propagation in a one-dimensional nonlinear graded metamaterial

An analytical method,called the symplectic mathematical method,is proposed to study the wave propagation in a spring-mass chain with gradient arranged local resonators and nonlinear ground springs.Combined with the linearized perturbation approach,the symplectic transform matrix for a unit cell of the weakly nonlinear graded metamaterial is derived,which only relies on the state vector.The results of the dispersion relation obtained with the symplectic mathematical method agree well with those achieved by the Bloch theory.It is shown that wider and lower frequency bandgaps are formed when the hardening nonlinearity and incident wave intensity increase.Subsequently,the displacement response and transmission performance of nonlinear graded metamaterials with finite length are studied.The dual tunable effects of nonlinearity and gradation on the wave propagation are explored under different excitation frequencies.For small excitation frequencies,the gradient parameter plays a dominant role compared with the nonlinearity.The reason is that the gradient tuning aims at the gradient arrangement of local resonators,which is limited by the critical value of the local resonator mass.In contrast,for larger excitation frequencies,the hardening nonlinearity is dominant and will contribute to the formation of a new bandgap.

Review of functionally graded materials processed by additive manufacturing

Additive manufacturing(AM)technology makes parts through layer-by-layer deposition,which can regulate the microstructure and properties of different parts of a single part well.It provides a new idea for the preparation of functionally gradient materials(FGM),and has become a research hotspot at present.By referring to and analyzing the recent research achievements in the additive manufacturing tech-nology of FGM,the latest research progress at domestic and abroad from four aspects were summaried:selective laser melting additive man-ufacturing,electron beam additive manufacturing,arc additive manufacturing,path planning,and material texture.Moreover,the existing problems in the research are pointed out,and the future research direction and focus are prospected.

刮痧改善腰椎间盘突出疼痛症状的系统评价及GRADE证据质量评价

目的系统评价刮痧干预腰椎间盘突出疼痛症状的疗效与安全性,为其临床治疗提供循证依据。方法计算机检索自建库到2022年8月29日前公开发表在中国知网、万方、维普、中国生物医学文献服务系统、PubMed、Embase、Web of Science、The Cochrane Library数据库,收集关于刮痧干预腰椎间盘突出的随机对照试验(Randomized controlled trial,RCT)。文章由两名研究者独立筛选,根据Cochrane Reviewers Handbook 6.2的偏倚风险评估工具对纳入文献进行质量评价,应用RevMan 5.4软件对纳入文献的结局指标进行Meta分析,并采用GRADE系统对结局指标进行证据质量等级评价。结果最终纳入10篇RCT,共1087例患者。Meta分析结果显示:刮痧试验组治疗腰椎间盘突出患者在疼痛VAS评分[MD=-1.11,95%CI(-1.58,-0.64),P<0.00001]、日本骨科协会(JOA)评分[MD=4.47,95%CI(3.76,5.17),P<0.00001]、临床有效率[relative risk(RR)=1.13,95%CI(1.08,1.19),P<0.00001]和护理满意度[RR=1.21,95%CI(1.09,1.34),P=0.0005]方面,明显优于对照组,差异均有统计学意义(P<0.00001)。本文结局指标的证据质量为极低。结论当前证据表明,刮痧治疗腰椎间盘突出患者的疼痛症状具有良好临床疗效,并有助于提高临床护理满意度。由于部分结局证据质量较低,有待严谨的多中心、大样本随机对照试验来进一步验证其有效性,提升临床证据。

Vibration and sound transmission loss characteristics of porous foam functionally graded sandwich panels in thermal environment

This study investigates the vibration and acoustic properties of porous foam functionally graded(FG)plates under the influence of the temperature field.The dynamics equations of the system are established based on Hamilton's principle by using the higher-order shear deformation theory under the linear displacement-strain assumption.The displacement shape function is assumed according to the four-sided simply-supported(SSSS)boundary condition,and the characteristic equations of the system are derived by combining the motion control equations.The theoretical model of vibro-acoustic coupling is established by using the acoustic theory and fluid-structure coupling solution method under the simple harmonic acoustic wave.The system's natural frequency and sound transmission loss(STL)are obtained through programming calculations and compared with the literature and COMSOL simulation to verify the validity and reliability of the theoretical model.The effects of various factors,such as temperature,porosity coefficients,gradient index,core thickness,width-to-thickness ratio on the vibration,and STL characteristics of the system,are discussed.The results provide a theoretical basis for the application of porous foam FG plates in engineering to optimize vibration and sound transmission properties.

Interfacial behavior of a thermoelectric film bonded to a graded substrate

To improve the thermoelectric converting performance in applications such as power generation,reutilization of heat energy,refrigeration,and ultrasensitive sensors in scramjet engines,a thermoelectric film/substrate system is widely designed and applied,whose interfacial behavior dominates the strength and service life of thermoelectric devices.Herein,a theoretical model of a thermoelectric film bonded to a graded substrate is proposed.The interfacial shear stress,the normal stress in the thermoelectric film,and the stress intensity factors affected by various material and geometric parameters are comprehensively studied.It is found that adjusting the inhomogeneity parameter of the graded substrate,thermal conductivity,and current density of the thermoelectric film can reduce the risk of interfacial failure of the thermoelectric film/graded substrate system.Selecting a stiffer and thicker thermoelectric film is advantageous to the reliability of the thermoelectric film/graded substrate system.The results should be of great guiding significance for the present and upcoming applications of thermoelectric materials in various fields.

Wave propagation analysis of porous functionally graded piezoelectric nanoplates with a visco-Pasternak foundation

This study investigates the size-dependent wave propagation behaviors under the thermoelectric loads of porous functionally graded piezoelectric(FGP) nanoplates deposited in a viscoelastic foundation.It is assumed that(i) the material parameters of the nanoplates obey a power-law variation in thickness and(ii) the uniform porosity exists in the nanoplates.The combined effects of viscoelasticity and shear deformation are considered by using the Kelvin-Voigt viscoelastic model and the refined higher-order shear deformation theory.The scale effects of the nanoplates are captured by employing nonlocal strain gradient theory(NSGT).The motion equations are calculated in accordance with Hamilton’s principle.Finally,the dispersion characteristics of the nanoplates are numerically determined by using a harmonic solution.The results indicate that the nonlocal parameters(NLPs) and length scale parameters(LSPs) have exactly the opposite effects on the wave frequency.In addition,it is found that the effect of porosity volume fractions(PVFs) on the wave frequency depends on the gradient indices and damping coefficients.When these two values are small,the wave frequency increases with the volume fraction.By contrast,at larger gradient index and damping coefficient values,the wave frequency decreases as the volume fraction increases.