Photo-Grafting Copolymerization of PP Nonwoven Fabric and Its Application for Acidic Dye Adsorption and Filtration

The monomer methacrylamido propyl trimethy ammonium chloride( MAPTAC) was copolymerized onto the fiber surface of polypropylene( PP) nonwoven fabric under ultroviole radiation. The weak acid red GN dye adsorption and adsorptive filtration performance of the resulted PP fabrics were investigated.The results showed that the grafting copolymerization preferred to happen in the inner layer of the fabrics. The water flux of the grafted fabrics decreases with the increase of grafting yield. The collapse of the grafted polymer chains causes the flux increase in acidic condition,or vice versa at alkaline version. The coiling of the polyelectrolyte chains upon the dye adsorption seems to violate the routine assumption of the rigid substrate, and this gets the adsorption energy constant negative. The static adsorption process follows the Lagergren's pseudo-second order kinetic equation. The removals of circa( ca.) 100% of the total permeation volume3 500 mL simulated dye wastewater was reached during permeation.The dye adsorbed fabrics were regenerated by the mixed media of the cationic surfactant / ethanol /water. The grafted fabric assumes stable fabric integrity and stability during permeation,and presents excellent dye adsorption capacity,easy desorption, and repeatable utilization.

Preparation and Swelling Kinetic Analysis of Poly (HPMC-co-AA-co-AM) Super Absorbent Resin

Super absorbent resin(SAR)is prepared by aqueous high temperature polymerization using hydroxypropyl methylcellulose(HPMC)as monomer backbone material,acrylic acid(AA)and acrylamide(AM)as the graft copolymer monomer,potassium persulfate(KPS)as the initiator to generate free radicals,and N,N`-methylenebisacrylamide(MBA)as cross-linking agent for cross-linking reaction.Simutaneously,the influence of individual factors on the water absorption is investigated,and these factors are mainly AA,AM,KPS,MBA,HPMC,and reaction temperature.The optimized conditions are obtained by the experiment repeating for several times.The water absorption multiplicity and salt absorption multiplicity under the conditions are 782.4 and 132.5 g/g,respectivity.Furthermore,the effects of different temperatures and salt concentrations on its water absorption,as well as the swelling kinetics of SAR are studied.It is indicated the water-absorbing swelling process is mainly caused by the difference in water osmotic pressure and Na+concentration inside and outside the cross-linked molecular structure of the resin,which is not only consistent with the quasi-secondary kinetic model,but also with the Fick diffusion model.

GRAFT COPOLYMERIZATION OF VINYL MONOMERS ONTO STARCH INITIATED BY TRANSITION METAL-THIOUREA REDOX SYSTEMS

In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentrations. It was shown that the grafting capability of Mn(VII)-TU is the highest in these initiating systems. Using Mn (VII-TU as initiator, the effects of various acids (HClO4, H2SO4, HNO3, HCl) on the graft copolymerization of acrylonitrile onto starch were discussed, and the capabilities of graft copolymerization of methyl methacrylate (MMA), acrylamide (AM), acrylic acid (AA) onto starch were investigated. The experimental results show that the order of the influences of different acids is HClO4 > H2SO4 > HNO3 > HCl, and the order of grafting capabilities of different monomers grafted onto starch is MMA > AN > AM > AA. The structure and morphology of graft, copolymers were studied with infrared spectroscopy and scanning electron microscopy. The size, shape and roughness of surface of the grafted starch granules are changed after grafting.

Determination of Crosslinking and Grafting in Polyurethane-acrylic Hybrid Material and Their Theoretical Calculations

A theoretical method to calculate the mode of polyurethane（PU） prepolymers grafted to polyacrylic（PAC） was presented. Using hydroxyethyl acrylate（HEA） as coupling agent, polyurethane-acrylics（PU-AC） hybrid latexes were prepared with varying HEA level and the reaction of HEA with PU prepolymers at different temperatures, and PU grafted to PAC was experimentally determined. The results show that PU grafted to PAC regularly increased, and the non-grafted and linear free PU regularly decreased with increase in HEA/NCO（isocyanate group）. The grafted PU on PAC was not proportional to HEA. More than half of linear PU prepolymers were grafted to PAC when HEA was at a low level with HEA/NCO at 0.33. While grafted PU increased to 84.80%（mass fraction）, when HEA/NCO increased to 1.0. The results were interpreted based on the theoretical calculation of PU grafted to PAC by the present method.

Graft Copolymerization of Ethyl Acrylate onto Hydroxypropyl Methylcellulose Using Potassium Persulfate as Initiator

With potassium persulfate (KPS) as initiator, graft copolymerization of ethyl acrylate (EA) onto water-soluble hydroxypropyl methylcellulose (HPMC) was investigated in aqueous medium. Effects of monomer concentration, initiator concentration, matrix concentration, and reaction temperature on the percentage of grafting (G) and grafting efficiency (G_E) were studied. The results show that G and G_E values both increase with the the increase of EA concentration and KPS concentration; when raising HPMC concentration from 0.12 mmol/L to 0.47 mmol/L, G decreases, while G_E increases;and when raising reaction temperature from 50 ℃ to 65 ℃,G increases, but G_E decreases. In addition, the graft copolymers were characterized by Fourier transform infrared (FTIR) spectra and transmission electron microscopy (TEM) methods.

MODIFICATION OF SILK FIBER via EMULSION GRAFT COPOLYMERIZATION WITH FLUOROACRYLATE

2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto sil...

Studies on Graft Copolymerization of Acrylic Acid onto Ramie Fibers with Chromic Acid Initiation System

The graft copolymerization of acrylic acid (AA) with unswollen and swollen ramie fibers using chromic acid (H 2CrO 4) as the initiator has been studied in the presence of air. The effects of initiator concentration, monomer concentration, perchloric acid (HClO 4) concentration, time of polymerization, reaction temperature, and amount of ramie fibers on the graft percentage have been found out. The graft copolymer was characterized by IR spectra, scanning electron microscopy(SEM), differential thermal analysis (DTA), and thermogravimertric analysis (TGA).

Graft copolymerization of cellulose and 2-hydroxyethyl methacrylate in an ionic liquid

Dissolution and homogeneous graft copolymerization of cellulose were performed in an ionic liquid 1-allyl-3-methylimidazolium chloride （AmimCl） with 2-hydroxyethyl methacrylate. The synthesized AmimCl and cellulose graft copolymers were characterized by FTIR, ^1 H-NMR and XRD spectroscopy. The results show that AmimCl dissolved cellulose directly by destroying intermolecular and intramolecular hydrogen bonds in cellulose and the crystalline form of cellulose was transformed from cellulose Ⅰ to cellulose Ⅱ after regeneration from AmimCl. The best synthetic condition of the cellulose-graft-P （2-hydroxyethyl methacrylate） was that cellulose 0.5 g, 2-hydroxyethyl methacrylate 3.00 g and initiator ammonium persulfate 0.05 g reacted for 180 min at 60℃; the rate of grafting reached 77.3%.

THE EFFECTS OF MAGNETIC FIELD ON GRAFT COPOLYMERIZATION OF METHYL METHACRYLATE ONTO POLYVINYL ALCOHOL IN THE PRESENCE OF BENZOPHENONE DURING UV IRRADIATION

The effects of magnetic field on the graft ratio and stereoregularity of grafts of PVA-g-MMA in the presence ofbenzophenone during UV irradiation are discussed. By means of IR, it was found that the graft ratio was increased with the increment of magnetic field strength. Furthermore, application of relative weak magnetic field of 0.4 Tesla had been shown to substantially enhance the stereo-regularity of graft copolymer. The maximum stereo-regularity appeared when the graft ratio approached to 85% with the magnetic field of 1.2 Tesla (T). The resistance to moisture and heat resistance of the grafted copolymer in the presence of magnetic field were also improved.

GRAFTING OF ACRYLAMIDE ONTO SURFACE OF COPOLYMERS CONTAINING P-TOLYLCARBAMOYL PENDANT GROUP INITIATED WITH CERIC SALT

Two copolymers containing p-tolylcarbamoyl pendant group poly (MAMT-co-VAc) and poly(MAMT-co-MA) were synthesized f and the graft copolymerization of AAM onto these two func-tional copolymers films initiated with ceric salt were carried out in aqueous solution for variousperiods at 30℃. The formation of graft copolymer was verified by water absorption, ESCA andSEM photographs. Based on the results of the study of the initiation mechanism of model com-pounds and ceric salt systems, the reaction mechanism of the graft copolymerization initiated withceric salt was proposed.

Graft Copolymerization of Modified Oxidized Starch and Its ER Effect

To enhance the polarization of starch, the oxidized starch-BA-MAA-Gd copolymer was synthesized by radical graft copolymerization. The structure of the graft copolymer was determined by IR, scanning electron microscopy, state thermal analysis and X-ray diffraction. The electrorheological properties of the graft copolymer were also investigated. The results show that shear stress increases with the increase of the graft copolymer loadings and the electric field intensity.

RADICAL GRAFTING REACTIONS ONTO STARCH AND OTHER WATER-SOLUBLE COPOLYMERS IN ISOLATED GEL DROPLETS

A novel radical grafting copolymerization process has been designed for water-soluble polymers which avoids the problems of conducting grafting reactions in highly viscous polymerization media. A variety of water-soluble graft copolymers having starch or dextran as the backbone chain with grafted side chains of polyacrylamide (—AM—), poly (acrylic acid ) (—AA—), poly (acrylamide-co-acrylic acid) (—AM—NH_4AA—) or poly ( acrylamide-co-2-acryiamido-2-methyl-l-propanesulphinic acid) (—AM—AMPS—) have been synthesized in gel droplets using aceric sulphate redox initiator, and their properties compared. The reaction conditions were optimized taking into account reaction kinetic data and the observed properties of the products produced under different reaction conditions. The effects of the ratios of [backbone]/[graft monomer], [ AM]/[ AA]/[AMPS] , [Ce^(4+)]/[ S_2O_8=] and pH value on the reaction rate , conversion, grafting degree, grafted chain length and the product molecular weight have been investigated.

GRAFTING ONTO WOOL V.RADIATION-INITIATED GRAFTING OF ACRYLIC ACID ONTO WOOL FIBER

This paper deals with graft copolymerization of acrylic acid (AA) onto Xinjiang fine wool.fiber in aqueous medium initiated by gamma rays. Graft copolymerization was carried out by themutual irradiation method in limited air. Percent grafting and percent efficiency have been deter-mined as a function of total dose, dose rate, concentration of monomer, wool weight and reactiontemperature. Graft copolymers are characterized with infrared (IR) spectroscopy, scanning elec-tron microscopy (SEM), and X--ray diffractometer. Properties of the grafts were studied, and compared with the virgin fiber.

Preparation of superabsorbent by graft copolymerization of acrylic acid onto corn starch using K_2S_2O_8 and rare earths as initiators

K2 S2 O8 and rare earths （RE） were used as initiators to prepare superabsorbents by graft copolymerization of acrylic acid （ AA ） onto corn starch. The effects of monomer concentration, initiator K2 S2 O8 concentration, cross-linker concentration, reaction temperature and the concentration ratio of RE and K2 S2O8 on the graft copolymerization were studied in terms of the water absorption capacity of superabsorbents. Results indicate that the optimum conditions obtained for the grafting of AA onto 5g starch are as follows： AA of 75. 773 g/L, K2S20s of 0. 437 g/L, RE of 0. 874 g/L, cross-linker of 0. 381 g/L and temperature of 70 ℃. The maximum water absorption capacity obtained is 740 g/g. The new method of graft polymerization is easily proceeded and controlled. The graft copolymers were characterized by infra-red spectroscopy, scanning electron microscopy and TG. Results characterized by IR and SEM give strong evidence for grafting of AA onto corn starch, and those characterized by TG reveal that the grafting of AA improves the theimostability of corn starch.

KINETICS STUDY ON MELT GRAFTING ACRYLIC ACID ONTO LLDPE USING REACTIVE EXTRUSION

The kinetics of melt grafting acrylic acid （AA） onto linear low density polyethylene （LLDPE） by using reactive extrusion was investigated. The polymeric peroxides （POOP and POOH） generated by electron beam irradiation were used to initiate the graft reaction. The samples taken out from the barrel at five ports along screw axis were analyzed by FTIR. The spectra show that both the graft copolymerization and homopolymerization proceed in two stages： the graft degree （or mass of homopolymer） increases linearly with the reaction time in the initial stage, and then gradually in the second stage. The rate of graft copolymerization Rg is always faster than that of homopolymerization Rh in the present system and the activation energy is 131 kJ · mol^-1 for graft copolymerization and 127 kJ · mol^-1 for homopolymeirzation. These results were interpreted in terms of solubility and diffusion of monomer, as well as the reactivity and the concentration of reactive species. The relationships between reaction rate and monomer concentration and peroxide concentration were found to be： Rg ∞ [M]^1.46[POOP＋POOH]^0.53 and Rh ∞ [M] ^1.08[POOH]^0.51, which indicate that the addition of monomer to polymeric radicals is a slow step for the graft copolymerization.

Modification of Natural Rubber Latex by Graft Copolymerization of 2-Ethylhexyl Acrylate and Methacrylic Acid

Natural rubber(NR)grafted with 2-ethylhexyl acrylate(2-EHA)and methacrylic acid(MAA,collectively NR-g-PEHA/MAA)was synthesized by emulsion polymerization.Tetraethylenepentamine and cumene hydroperoxide were used as redox initiators.The successful grafting of 2-EHA and MAA onto NR was confirmed by Fourier transform infrared spectroscopy.The morphology of the NR latex particles was observed by transmission electron microscopy.The effects of reaction temperature,initiator dosage,feeding mode,and hard monomer content on the mechanical properties of the modified NR film were investigated.Grafted polymer chains were unevenly wrapped on the outside of NR particles,and smaller particles were more easily grafted.Crosslinking was characterized using a toluene swelling method.Thermal stability and glass transition temperature were examined by differential scanning calorimetry and thermogravimetric analysis.The results showed that the thermal stability of NR-g-PEHA/MAA had been improved,and the glass transition temperature(Tg)was unchanged.

Studies on the Graft Copolymerization of Methyl Acrylate and Ethyl Acrylate onto Corn Starch Using Potassium Persulfate-Sodium Thiosulphatc as Initiation System

Grafting copolymerizations of methyl acrylate(MA) and ethyl acrylate(EA) onto corn starch, respectively, initiated by potassium persulfate-sodium thiosulphate (KPS-STS) redox system, were studied. The structures of poly(MA)-g-starch and poly(EA)-g-starch were characterized by IR, SEM and X-ray diffraction. Experimental results show that KPS-STS is an efficient initiation system for grafting of MA and EA onto corn starch. The maximum percent grafting was obtained at [KPS] of 6.0× 10~3 mol/L, [STS] of 1.8× 10 5 mol/L, [M] of 6. 0× 101 mol/L, S:L=4:100 at 40℃ for 6 h. The reactivity order is MA>EA.

Starch Modification by Graft Copolymerization of Acrylonitrile

The graft copolymerization of acrylonitrile (AN) onto starch under the initiation of potassium permanganate was investigated. The effect of various reaction conditions on the graft copolymerization was studied. The relationships between the grafting rate and the initiator concentration of potassium permanganate, monomer acrylonitrile and backbone starch, as well as reaction temperature were established. The oxidation reaction of starch with manganic ions and valence changes of manganic ions during the graft copolymerization were discussed. The results show that manganic ion Mn 7+ underwent a series of valence changes during the graft copolymerization: Mn(Ⅶ) → Mn(Ⅳ) → Mn(Ⅲ) → Mn(Ⅱ). The grafting rate of the graft copolymerization of acrylonitrile onto starch is also given.

The Optimized Synthesis of Starch-g-Lactic Acid Copolymer with High Grafting Degree Catalyzed by Sulfuric Acid

The starch-g-lactic acid copolymer was synthesized with catalysis of sulfuric acid by onestep process, and the structure of starch-g-lactic acid copolymer was characterized by means of IR, 13C-NMR, HMBC, XRD, and SEM. The experimental results show that the maximum grafting degree of starch can reach 75% when the starch-g-lactic acid copolymer is activated at 80 ℃ for 2 h and reacted with lactic acid at 90 ℃ for 4 h in vacuum.

STUDIES ON GRAFT COPOLYMERIZATION OF DL-LACTIDE ON CORN STARCH AND BIODEGRADABILITY OF THE COPOLYMERS

The starch/D,L-lactide graft copolymers were synthesized by reacting D,L-lactide with corn starch in N,N-dimethylacetamide (DMAM) in the presence of triethylamine (NEt3) and anhydrous lithium chloride. The effect of reaction time and the molar ratio of D,L-lactide to glucose structural unit of starch on monomer conversion(C%), graft (G%) and graft efficiency (GE%) were studied. The C%, G% and GE% could approach 37.3%,179.7% and 68.0%, respectively when the molar ratio of D,L-lactide to glucose structural unit of starch is 10:1 and the graft copolymerization was carried out at 80-85℃ for 4 hours under nitrogen atmosphere. The Fourier transforms infra-red (FTIR) spectroscopy, differential scanning calorimetry (DSC) and X-ray diffraction (XRD) spectroscopy were used in order to characterize the graft copolymers. FTIR spectra show that absorption band at 1740 cm-1 confirmed the formation of ester bond, indicating the starch /D,L-lactide graft copolymers were produced, the DSC characteristic results show the melting temperature of the graft copolymer were elevated slightly as the molar ratio of D,L-lactide to glucose structural units of starch increased and the X-ray diffraction spectra show the synthesized graft copolymers were amorphous. The degradability of graft copolymer was tested with the aid of acid, alkali and microbe such as bacillus subtilis and staphylococcus aureus. The results of water resistance show the graft copolymer produced can be used as a component of impermeable coating for cardboard.