The application of geostatistics in grain size trend analysis： A case study of eastern Beibu Gulf

There are 71 surface sediment samples collected from the eastern Beibu Gulf. The moment parameters （i.e. mean size, sorting and skewness） were obtained after applying grain size analysis. The geostatistical analysis was then applied to study the spatial autocorrelation for these parameters; while range, a parameter in the semivariogram that meters the scale of spatial autocorrelation, was estimated. The results indicated that the range for sorting coefficient was physically meaningful. The trend vectors calculated from grain size trend analysis model were consistent with the annual ocean circulation patterns and sediment transport rates according to previous studies. Therefore the range derived from the semivariogram of mean size can be used as the characteristic distance in the grain size trend analysis, which may remove the bias caused by the traditional way of basing on experiences or testing methods to get the characteristic distance. Hence the results from geostatistical analysis can also offer useful information for the determination of sediment sampling density in the future field work.

Sediment transport in the Luanhe River delta:grain size trend analysis

Sediment grain size in the deltaic environment of the Luanhe River(LR),Liaoning,China,contains sediment transport pathway information useful in elucidating the shoreline change and fluvialmarine interaction.In this study,we utilized numerical partitioning of the sedimentary components and geostatistical grain size trend analysis(GSTA)to define the sediment transport pattern in the Luanhe River delta(LRD)and interpolated the sediment transport pattern using content changes of end numbers(EM).EM1(the mean grain size 7.12Ф,fine silt),EM2(2.37Ф,fine sand),and EM3(1.27Ф,medium sand)components were identified by the numerical partitioning by GSTA.Kriging interpolation method was used to interpolate the parameters of the grain size for the regular grid,and the interpolation radius was 0.015 decimal degree.We chose 0.09 decimal degree as the characteristic distance for GSTA in the semivariogram model using the geostatistical method.The FB(-)case(finer,better sorted and more negatively skewed)was adopted in GSTA for its satisfaction in the Global Moran’s I test.The result of the GSTA shows that the sediments in the south barriers(SBs)were transported to the southwest of the study area.The sediments in the north,in the SE direction of sediment transport trend from the river mouth,indicated that the sediments in the north of the study area were transported from the LR to the northern beaches,and to the south and east of the study area.The sediment transport trend that simplified by GSTA as the FB(-)case was approved by the content changes of sedimentary components(i.e.EM1,EM2,and EM3).In addition,the turbulent jet diffusion pattern indicated that the coarse sediments(EM3)were delivered by LR during the flood season,and the EM2 and EM1 were from wave and tide,respectively.

The reverse sediment transport trend between abandoned Huanghe River(Yellow River) Delta and radial sand ridges along Jiangsu coastline of China——an evidence from grain size analysis

To reveal the sediment transporting mechanism between the abandoned Huanghe River （Yellow River） Delta and radial sand ridges, “End Member” Model and grain size trend analysis have been employed to separate the “dynamic populations” in the surficial sediment particle spectra and to determine the possible sediment transporting pathway. The results reveal four “dynamic subpopulations”（EM1 to EM4） and two reverse sediment transporting directions： a northward transport tend from the radial sand ridges to mud patch, and a southward transport trend in deep water area outside the mud patch. Combined with the published hydrodynamic information, the transporting mechanism of dynamic populations has been discussed, and the main conclusion is that the transporting of finer subpopulations EM1 and EM2 is controlled by the “anticlockwise residual current circulation” forming during tidal cycle, which favor a northward transporting trend and the forming of mud patch on the north of radial sand ridges, while the transporting of coarser EM3 is mainly controlled by wind driven drift in winter, which favors a southward transporting direction.

Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River

The average size of the sand of dune in the vicinity of Tumen River is 0.12～0.30 mm, its standard deviation is 0.45～0.99 φ and the frequency cumulative distribution curve is divided into the single peak and the double peak. The Ski of the single peak is negative and the double peak is positive. There are two different areas in the plot of the Ski versus σi* It is shown that the sedimentary environment of the dunes is neritic deposit by the expressions of the grain-size parameters. All of the characters show that the sand dunes in Estuary of Tumen River may be the dunes of sea facies which were changed again by weathering and fluvialaction.

Short Communication: Analysis of Grain Size Distribution through Image Analysis

Herein we describe an approach to measure the volume and to characterize the volume distribution of large numbers of individual small regularly shaped seeds. The results of a preliminary investigation into the distribution of seed size of a multi-seeded sorghum mutant, as compared to the wild type from which it was developed are also reported, and are used as an example of the method’s utility.

Grain Size Analysis of a Growing Sand Bar at Sonadia Island, Bangladesh

Sonadia is one of the most important islands of Bangladesh. South-eastern shore of the island, which is a growing sand bar, has to encounter continuous and rapid morphological changes. So study of the sediment characteristics of this Sand Bar is very important. In the present study, grain size analysis of this Sand Bar has been done on the basis of laboratory analysis. Sediment samples were collected from 9 (Nine) stations and texture analysis of sediment was completed following a standard procedure of sieve analysis of sand samples. The average value of median (MD), mean (M), standard deviation (s), skewness (SK) and kurtosis (K) of sediment of the Sand Bar of Sonadia Island was 1.93, 1.87, 0.44, 0.11 and 1.88 respectively. Highest median, mean, standard deviation, skewness and kurtosis of Sand Bar of Sonadia Island was 2.98 (Station 2, Lower Shore), 2.68 (Station 1, Lower Shore), 0.83 (Station 1, Middle Shore and Station 2, Lower Shore), 0.65 (Station 2, Lower Shore) and 3.59 (Station 1, Lower Shore) respectively. Lowest median, mean, standard deviation, skewness and kurtosis of Sand Bar of Sonadia Island was 1.42 (Station 9, Middle Shore), 1.45 (Station 9, Middle Shore), 0.30 (Station 5, Lower Shore and Station 8, Lower Shore), 0.04 (Station 5, Upper Shore) and 0.94 (Station 6, Upper Shore) respectively.

Establishing empirical relationships to predict grain size and tensile strength of friction stir welded AA 6061-T6 aluminium alloy joints

AA 6061-T6 aluminium alloy(Al-Mg-Si alloy) has gathered wide acceptance in the fabrication of light weight structures requiring a high specific strength and good corrosion resistance.Compared with the fusion welding processes that are routinely used for joining structural aluminium alloys,friction stir welding(FSW) process is an emerging solid state joining process in which the material welded does not melt and recast.Joint strength is influenced by the grain size and tensile strength of the weld nugget region.Hence,an attempt was made to develop empirical relationships to predict grain size and tensile strength of friction stir welded AA 6061-T6 aluminium alloy joints.The empirical relationships are developed by response surface methodology(RSM) incorporating FSW tool and process parameters.A linear regression relationship was also established between grain size and tensile strength of the weld nugget of FSW joints.

Correlation Study on Grain Size Characteristics and Geotechnical Properties of Surface Sediments in Qingdao Offshore Area

The comprehension of sediment grain size parameters and the corresponding sedimentary environment holds paramount importance in elucidating the engineering geological attributes of the subaqueous seabed.This study delineated the sedimentary environment zoning in the northern sea area of Qingdao through cluster analysis of grain size parameters derived from 123 surface sediment samples.The study analyzed the correlation between sediment geotechnical indices and grain size parameters across diverse sedimentary environments.A correlation equation was established for samples exhibiting a strong correlation.The study found four distinct sedimentary environments in the study area:coastal,transitional,shallow sea,and residual.Within the same sedimentary environment,the average grain size and sorting coefficient exhibit significant correlations with geotechnical indices such as water content,density,shear strength,plastic limit,liquid limit,and plastic index.However,notable disparities in the correlation between grain size parameters and geotechnical indices emerge across different sedimentary environments.

GSW3.1,a novel gene controlling grain size and weight in rice

Grain size and weight are closely related traits determining yield in rice(Oryza sativa L.).Since indica and japonica rice varieties differ significantly in multiple traits,a high-generation recombinant inbred line(RIL)population derived from the crossing LH9(indica)and RPY(japonica)was used to map grainrelated traits in six environments.Pyramiding of the quantitative trait loci(QTL)for thousand-grain weight showed that combinations of multiple QTL significantly increased the phenotypic effect.A novel gene named GSW3.1 controlling grain size and weight was discovered using the major QTL for the colocalization of grain width and thousand-grain weight on chromosome 3.Gene editing revealed that GSW3.1(LOC_Os03g16850)was pleiotropic,positively regulating grain size and weight while affecting several other agronomic traits.Haplotype analysis indicated that some traits,including grain width and weight,were highly correlated with indica-japonica differentiation.

Changes of grain size from peat profile in eastern mountainous area over past 2000 years,Jilin Province,Northeast China

Plenty of high-resolution paleoclimate investigations of the last thousand years were carried out to potentially predict future climate changes.Mountainous ombrotrophic peatland is one of the best recorders for high-resolution paleoclimate studies in the forest area.Grain size analysis was carried out on ombrotrophic peat profile in the eastern mountainous region of Jilin Province,Northeast China.The peat profile lasts the past 2000 a by four radiocarbon(AMS14C)ages.The results showed that the inorganic minerals in the peat profile are mainly silt,with some contribution from clay and a minor amount of sand,which are mainly due to wind dust and suspended transportation.Two paleoclimate stages are found in this peat profile by phytolith analysis,peat cellulose isotope research and historical documents:ca.45–1550 AD,relatively cold period;ca.1550 AD–present,relatively warm period.This finding is important for the initial study of paleoclimatic changes over the last 2000 a in the mountainous area of eastern mountainous area,Jilin Province,Northeast China.

Grain-size distribution characteristics of red sandy sediments in Dongjiang River valley,southern Nanling Mountains,during the MIS2 stage

Layer LJ3 of Linjiang stratigraphic section in Dongjiang River valley in the south of the Nanling Mountains is a set of red sandy sediments.Measured by thermoluminescence(TL) dating,it was found to be formed in MIS2-9,500 ± 800 yr to 19,600 ± 1,800 yr B.P.After analy-sis of the grain sizes of the 16 samples(LJ3-100 to LJ3-85) in this layer,it was discovered that(1) The contents of each grain group in dif-ferent samples are similar.(2) The values of Md,Mz,,Sk,and Kg vary from LJ3-100 to LJ3-85 in a narrow range.(3) The segments of each sample in the accumulative curves extend parallel with similar slopes.All the three aspects reveal the Aeolian characteristics of Layer LJ3.Therefore,it is thought that Layer LJ3 consists of red sandy sediments formed in MIS2 in the south of Nanling Mountain,which reflects the arid climate at that time.

长江武汉段天兴洲低滩沉积物粒度端元对河流-风成沙丘沉积环境的指示意义

河床沙波向风成沙丘演变的过程具有特殊的沉积动力机制。笔者等以68份长江武汉段天兴洲洲头低滩沉积物的粒度分布数据为例,利用端元分析方法从每个粒度分布中分离提取4个粒度端元组分(EM1、EM2、EM3和EM4),探讨了河流—风成沙丘不同沉积环境中粒度端元的异同。研究结果表明:EM1和EM3组分在粒度分布中占比与沉积物粒度中值分别呈较好的线性正相关和负相关;河流沉积物主要由EM1、EM2和EM3组成的跳跃方式搬运,对应滚动次总体的EM4组分占比5%~10%,少悬浮搬运;风成沙纹沉积物主要包括两段跳跃次总体,以EM2组分为主、EM1和EM3组分为辅,少EM4组分;沙丘背风面沉积物主要靠颗粒流顺坡滑塌,以EM2组分为主、EM1和EM3组分为辅,含占比约为5%的EM4组分;未被风成沙纹覆盖的沙丘波谷沉积物记录了河流和小型滞水洼地的沉积特征,代表滚动次总体的EM4组分占比7%~15%,悬浮次总体占比可达20%。本文提取的沉积物粒度端元为弱风环境中河道内局部小型河流—风成沙丘的沉积环境和演化过程研究提供了参考。

Spatial heterogeneity for grain size distribution of eolian sand soil on longitudinal dunes in the southern Gurbantunggut Desert

The grain size composition, distribution characteristics and spatial variation of eolian sand soil on distinct positions across two longitudinal dunes and interdune areas were studied by means of conventional grain size analysis and geostatistical methods. In the study, 184 samples of eolian sand soil from the 0-30cm layer were systemically collected and measured from two longitudinal dunes and interdunes in the southern Gurbantunggut Desert. The results show that the dominant grain sizes are fine and very fine sands, and the differences of grain size compositions between the distinct geomorphologic positions are significant. The contents of clay and silt are highest on the interdune areas and lowest on the crests, and higher on the leeward slopes than on the windward slopes. The contents of very fine and fine sands are highest on the windward slopes and lowest on the crests. The contents of medium, coarse and very coarse sands are lowest on the interdune lands, and highest on the crests, and are identical on the two slopes. The coarser sizes (phi(1)) and mean sizes (Mz) for eolian sand soil all have a varying tendency from fine to coarse sizes with interdune area -> leeward slope -> windward slope -> crest, and the sorting (sigma) are poorly to well sorted. The results of geostatistical analysis reveal that phi(1), Mz and a values are moderately to strongly spatially autocorrelated. The values of the spatially correlated ranges are phi(1) < sigma < Mz. The spatial variation for these grain size parameters is significant across the longitudinal dune landscape. From the crests towards the bottom of the slope, there is a varying gradient of zonal distribution, and the gradient values on the leeward slopes are larger than sites on the windward slopes.

A Novel and Pleiotropic Factor SLENDER GRAIN3 Is Involved in Regulating Grain Size in Rice

Grain size is frequently selected during domestication and breeding. It influences the preferences of consumers, thus affecting the commercial value of rice. In present study, a mutant named as SLENDER GRAIN3(sg3) was identified from cultivar Zhenong 41(Oryza sativa L. ssp. indica) with ethyl methanesulfonate(EMS) treatment. Histological analysis showed that the slender grain of sg3 mutant resulted from increased cell division longitudinally and decreased cell division horizontally. Compared with the wild type Zhenong 41, starch granules in sg3 mutant were more closely packed, thus decreasing the chalkiness. Moreover, grain yield per plant in sg3 mutant was improved by 14%. By map-based cloning, SG3 was located on the long arm of chromosome 3 with a physical distance of 82 kb, and a 9-bp deletion in the 5′-UTR of LOC_Os03 g27110 was identified, which upregulated the expression level significantly. Moreover, a molecular marker for SG3 was developed to identify the grain size during the early generation breeding in rice. The novel factor SG3 regulated the grain size mainly through changing the cell division and the endosperm formation in rice.

Thermal analysis as a microstructure prediction tool for A356 aluminium parts solidified under various cooling conditions

Thermal analysis technique has been used for a long time,in both ferrous and nonferrous industries for evaluating the metallurgical quality of the liquid metal before casting.However,obtaining a proper microstructure in a standard cup does not ensure that the microstructure is correct in real parts which may solidify at very different cooling rates.For this study,alloy A356 with different metal quality in terms of modification and grain refinement was tested.Different cooling rates were obtained by using cylindrical test samples with various diameters cast in sand and metallic moulds.The correlation between microstructure features such as grain size,modification rate and secondary dendrite arm spacing (SDAS) measured in the standard thermal analysis cup with those obtained in the cylindrical test parts has been investigated.Thus,knowing the thermal modulus and the mould type it is possible to establish the required grain size and modification rate in the standard cup in order to get a desired structure in a real part.Corrective actions can then be taken in order to improve the metallurgical quality before casting the part.

Association Mapping of Quantitative Trait Loci for Grain Size in Introgression Line Derived from Oryza rufipogon

Grain size is one of the critical agronomic traits governing grain yield and quality in rice.However,the underlying genetic mechanisms that control grain size in rice are poorly understood.We used an introgression line derived from Zhonghui 8015 and Oryza rufipogon Griff.This introgression line was evaluated under two different environmental conditions to dissect the quantitative trait loci controlling grain size.Genome-wide association study(GWAS)was performed using 28193 SNPs through a general linear model,and 56 significant SNPs on different loci associated with the 4 grain size traits were detected.Cloned genes including GS3 and q GL3 showed substantial effects on grain length and size.Seven new stable loci were identified with pleiotropic effects on grain size.Haplotype,gene expression analyses,combined gene-based associations,and functional annotations permitted the shortlisting of important dominant genes including GS3 and q GL3.

杭嘉湖平原ZK3钻孔沉积物粒度端元分析及其气候-海平面响应

杭嘉湖平原位于海陆交互的长江三角洲地区,极易受到海平面升降和极端气候事件的影响,对全球环境变化十分敏感。应用非参数化粒度端元分析模型提取杭嘉湖平原ZK3岩芯沉积物的端元组分,分析其物质来源;并结合植物藻类和磁化率指标全面揭示各端元组分对区域全新世气候-海平面变化响应。结果表明:(1)EM1(16.4 μm)主要为洪泛沉积物,EM2(35.3 μm)主要为湖相沉积物,EM3(58.9 μm)则为海相沉积物;(2)杭嘉湖平原8000 a BP以来的气候-海平面变化大致可分为四个阶段:约8000—6200 a BP,受东亚夏季风影响,气候温暖湿润,海平面上升并趋于稳定,区域内同时受到海洋和陆源输入影响,发育海陆过渡相沉积;约6200—4800 a BP,气候趋于干凉化,陆地面积扩大,沉积环境转变为河流为主的洪泛沉积;至4800—3100 a BP,气候回暖,海平面略有回升,发育为湖相沉积;3100—140 a BP,气候趋冷干化,海平面下降,广泛发育为泛滥平原沉积环境。

Effect of Pyrophyllite Particle Size on Properties of AI_2O_3-SiC-C Bricks for Iron Ladles

The Al2O3 -SiC-C bricks for iron ladles were pre-pared asing bauxite, fused corundum,pyrophyllite, SiC powder and flake graphite as main starting materials, and phenolic resin as binder. The effect of pyroph,yllite particle size on permanent change in dimensions, cold crushing strength, oxidation resistance, and corrosion resistance of Al2O3 - SiC - C bricks was investigated. The results show that with the decrease of the pyrophyllite particle size, the permanent change in dimensions of Al2O3 - SiC - C bricks decreases, cold crushing strength increases, the oxidation resistance at 1400 ℃ increases, and the corrosion resistance at 1500℃ decreases.

Assessment of sediment connectivity using modelling and field-based approaches in the Slavíč River catchment(MoravskoslezskéBeskydy Mts,Czech Republic)

Mountain streams act as conveyors of sediments within the river continuum,where the physical transport of sediments between river reaches through the catchment or between individual parts(e.g.,between hillslopes and channels)of the catchment is assumed.This study focused on sediment connectivity analysis in the SlavíčRiver catchment in the MoravskoslezskéBeskydy Mts in the eastern part of the Czech Republic.The connectivity index and connectivity index target modelling were combined with an analysis of anthropogenic interventions.Additionally,field mapping,grain size of bed sediments and stream power analysis were used to obtain information about connectivity in the catchment.Based on the analysis and obtained results,terrain topography is the current main driving factor affecting the connectivity of sediment movement in the SlavíčRiver catchment.However,the modelling provided valuable information about high sediment connectivity despite different recent land use conditions(highly forested area of the catchment)than those in historical times from the 16th to 19th centuries when the SlavíčRiver catchment was highly deforested and sediment connectivity was probably higher.The analysis of anthropogenic interventions,field mapping,grain size of bed sediments and stream power analysis revealed more deceleration of sediment movement through the catchment,decreased sediment connectivity with bed erosion,and gradual river channel process transformation in some reaches.Field mapping has identified various natural formations and human-induced changes impacting the longitudinal and lateral connectivity in the SlavíčRiver.For instance,embankments along 48%of the river's length,both on the right and left banks,significantly hinder lateral sediment supply to the channel.Stream power index analysis indicates increased energy levels in the flowing water in the river's upper reaches(up to 404.8 W m^(-2)).This high energy is also observed in certain downstream sections(up to 337.6 W m^(-2)),where it is influenced by human activities.These conditions lead to intensified erosion processes,playing a crucial role in sediment connectivity.Similar observations were described in recent studies that pointed out the long-term human interventions on many streams draining European mountains,where a decrease in sediment connectivity in these streams is linked with sediment deficits and the transformation of processes forming channels.

纳米掺铁二氧化钛的sol-gel法制备与表征(Ⅰ)热重红外联用分析掺铁二氧化钛凝胶的热分解和晶化特性

本文通过热分析、红外联用和 X射线衍射分析了不同煅烧温度下的纳米掺铁二氧化钛样品，研究了 sol-gel方法制备的纯二氧化钛和掺铁二氧化钛干凝胶的热分解和晶化过程。结果表明，干凝胶有较为明显的两个阶段的热分解。在实验条件下得到的二氧化钛干凝胶粉为无定形，无定形二氧化钛加热晶化过程是一个持续的过程，没有明显的晶化温度。