Suppressing Al2O3 nanoparticle coarsening and Cu nanograin growth of milled nanostructured Cu-5vol.%Al2O3 composite powder particles by doping with Ti

Both the coarsening of Al2O3 nanoparticles and the growth of Cu nanograins of mechanically milled nanostructured Cu-5 vol.%Al2O3 composites with, and without, trace amounts of Ti during annealing at973 K for 1 h were investigated. It was found that doping with a small amount of Ti（e.g. 0.2 wt%） in a nanostructured Cu-5 vol.%Al2O3 composite effectively suppressed the coarsening of Al2O3 nanoparticles during exposure at this temperature. Further, the Ti addition also prevented the concomitant abnormal growth of the copper grains normally caused by the coarsening of the Al2O3 nanoparticles. Energy dispersive X-ray spectroscopy analysis of the Al2O3 nanoparticles in the annealed Cu-5 vol.%Al2 O3-0.2 wt%Ti sample suggested that the Ti atoms either diffused into the Al2O3 nanoparticles or segregated to the Cu/Al2O3 interfaces to form Ti-doped Al2O3 nanoparticles, which was more stable than Ti-free Al2O3 nanoparticles during annealing at high homologous temperatures.

旋风收尘器的收尘效率和生料粒度分布关系

旋风收尘器所分离的固相颗粒大小对分离效率的影响非常显著,通常情况下只对10μm以上的颗粒保持很高的分离效率,对直径小于6μm的细颗粒的分级效率相对较低。本文分析了不同公司的生料粒度分布情况,通过计算生料的粒级效率、中位粒径,并对C1旋风筒技改后的生产线收尘效率进行对比,分析旋风筒收尘器与生料粒度的关系。