Proterozoic Granitization of the Archaean Gneisses in the Central Zone of the Precambrian Limpopo High-grade Terrain

Our research covers the granitization and charnockitization processes that affected the metapelitic gneisses in the Central Zone of the Precambrian Limpopo high-grade terrain,South Africa.Precambrian granulite facies terrains underwent two regional high-grade events,of which the first one occurred

Creep constitutive model considering nonlinear creep degradation of fractured rock

Stability analysis of underground constructions requires a model study of rock masses’ long-term performance. Creep tests under different stress conditions was conducted on intact granite and granite samples fractured at 30° and 45° angles. The experimental results indicate that the steady creep strain rates of intact and fractured rock present an exponential increase trend with the increase of stress level. A nonlinear creep model is developed based on the experimental results, in which the initial damage caused by fracture together with the damage caused by constant load have been taken into consideration. The fitting analysis results indicated that the model proposed is more accurate at identifying the full creep regions in fractured granite, especially the accelerated stage of creep deformation. The least-square fit error of the proposed creep model is significantly lower than that of Nishihara model by almost an order of magnitude. An analysis of the effects of elastic modulus, viscosity coefficient, and damage factors on fractured rock strain rate and creep strain is conducted. If no consideration is given to the effects of the damage, the proposed nonlinear creep model can degenerate into to the classical Nishihara model.

Impact of mica on geotechnical behavior of weathered granitic soil using macro and micro investigations

The micaceous weathered granitic soil(WGS)is frequently encountered in civil engineering worldwide,unfortunately little information is available regarding how mica affects the physico-mechanical behaviors of WGS.This study prepares reconstituted WGS with different mica contents by removing natural mica in theWGS,and then mixes it with commercial mica powders.The geotechnical behavior as well as the microstructures of the mixtures are characterized.The addition of mica enables the physical indices of WGS to be specific combinations of coarser gradation and high permeability but high Atterberg limits.However,high mica content in WGS was found to be associated with undesirable mechanical properties,including increased compressibility,disintegration,and swelling potential,as well as poor compactability and low effective frictional angle.Microstructural analysis indicates that the influence of mica on the responses of mixtures originates from the intrinsic nature of mica as well as the particle packing being formed withinWGS.Mica exists in the mixture as stacks of plates that form a spongy structure with high compressibility and swelling potential.Pores among the plates give the soil high water retention and high Atterberg limits.Large pores are also generated by soil particles with bridging packing,which enhances the permeability and water-soil interactions upon immersion.This study provides a microlevel understanding of how mica dominates the behavior of WGS and provides new insights into the effective stabilization and improvement of micaceous soils.

A coupled thermo-mechanical peridynamic model for fracture behavior of granite subjected to heating and water-cooling processes

Thermal damage and thermal fracture of rocks are two important indicators in geothermal mining projects.This paper investigates the effects of heating and water-cooling on granite specimens at various temperatures.The laboratory uniaxial compression experiments were also conducted.Then,a coupled thermo-mechanical ordinary state-based peridynamic(OSB-PD)model and corresponding numerical scheme were developed to simulate the damage of rocks after the heating and cooling processes,and the change of crack evolution process was predicted.The results demonstrate that elevated heating temperatures exacerbate the thermal damage to the specimens,resulting in a decrease in peak strength and an increase in ductility of granite.The escalating occurrence of thermal-induced cracks significantly affects the crack evolution process during the loading phase.The numerical results accurately reproduce the damage and fracture characteristics of the granite under different final heating temperatures(FHTs),which are consistent with the test results in terms of strength,crack evolution process,and failure mode.

Numerical simulation of microwave-induced cracking and melting of granite based on mineral microscopic models

This study introduces a coupled electromagnetic–thermal–mechanical model to reveal the mechanisms of microcracking and mineral melting of polymineralic rocks under microwave radiation.Experimental tests validate the rationality of the proposed model.Embedding microscopic mineral sections into the granite model for simulation shows that uneven temperature gradients create distinct molten,porous,and nonmolten zones on the fracture surface.Moreover,the varying thermal expansion coefficients and Young's moduli among the minerals induce significant thermal stress at the mineral boundaries.Quartz and biotite with higher thermal expansion coefficients are subjected to compression,whereas plagioclase with smaller coefficients experiences tensile stress.In the molten zone,quartz undergoes transgranular cracking due to theα–βphase transition.The local high temperatures also induce melting phase transitions in biotite and feldspar.This numerical study provides new insights into the distribution of thermal stress and mineral phase changes in rocks under microwave irradiation.

Geochemistry, zircon U–Pb geochronology, and Hf isotopes of S-type granite in the Baoshan block, constraints on the age and evolution of the Proto-Tethys

Geochemistry, zircon U–Pb geochronology, and Hf isotope data for the Early Paleozoic granites in the Baoshan Block reveal the Early Paleozoic tectonic evolution of the Proto-Tethys. The samples are high-K, calcalkaline, strongly peraluminous rocks with A/CNK values of 1.37–1.46, are enriched in SiO2, K2O, and Rb, and are depleted in Nb, P, Ti, Eu, and heavy rare earth elements,which indicates the crystallization fractionation of the granitic magma. Zircon U–Pb dating indicates that they formed in ca. 480 Ma. The Nansa granites have εHf(t) values ranging from-16.04 to 4.36 with corresponding TC DMages of 2.10–0.81 Ga, which suggests the magmas derived from the partial melting of ancient metasedimentary with minor involvement of mantle-derived components. A synthesis of data for the Early Paleozoic igneous rocks in the Baoshan block and adjacent(Tengchong,Qiangtang, Sibumasu, Himalaya, etc.) blocks indicates that these blocks were all aligned along the proto-Tethyan margin of East Gondwana in the Early Paleozoic. The Early Paleozoic S-type granites from Nansa were generated in a high-temperature and low-pressure(HTLP) extensional tectonic setting, which resulted from Andean-type orogeny instead of the final assembly of Gondwana or crustal extension in a non-arc environment. In certain places, an expanding environment may exist in opposition to the tectonic backdrop of the lithosphere’s thickening and shortening, leading the crust to melt and decompress,mantle-derived materials to mix, and a small quantity of peraluminous granite to emerge.

Geochronology and Geochemistry of the Xingxingxia Triassic A-type Granites in Central Tianshan,NW China:Petrogenesis and Tectonic Implications

The Triassic granitoids in Central Tianshan play a key role in determining the petrogenesis and tectonic evolution on the southern margin of the Central Asian orogenic belt.In this study,we present SHRIMP zircon U-Pb ages,Hf isotopic and geochemical data on the Xingxingxia biotite granite,amazonite granite and granitic pegmatite in Central Tianshan,NW China.Zircon U-Pb dating yielded formation ages of 242 Ma for the biotite granite and 240 Ma for the amazonite granite.These granitoid rocks have high K_(2)O with low MgO and CaO contents.They are enriched in Nb,Ta,Hf and Y,while being depleted in Ba and Sr,showing flat HREE patterns and negative Eu anomalies.They have typical A-type granite geochemical signatures with high Ga/A_(1)(8–13)and TFeO/(TFeO+MgO)ratios,showing an A_(2) affinity for biotite granite and an A_(1) affinity for amazonite granite and granitic pegmatite.Zircon ε_(Hf)(t)values of the granitoids are 0.45–2.66,with Hf model ages of 0.99–1.17 Ga.This suggests that these A-type granites originated from partial melting of the lower crust.We propose that Xingxingxia Triassic A-type granites formed under lithospheric extension from post-orogenic to anorogenic intraplate settings and NE-trending regional strike-slip fault-controlled magma emplacement in the upper crust.

Comparison of microwave- and thermal-assisted rock fragmentation methods at different temperatures and loading rates

Understanding the effects of microwave irradiation and thermal treatment on the dynamic compression and fragmentation properties of rocks is essential to quantify energy consumption in rock engineering.In this study,Fangshan granite(FG)specimens were exposed to microwave irradiation and heat treatment.The damage of FG specimens induced by these two methods was compared using X-ray CT scanning and ultrasonic wave method.The temperatures of FG after microwave irradiation and thermal treatment were effectively evaluated using a newly proposed technique.A novelty method for precisely determining the geometric features of fragments is developed to estimate the fragmentation energy.Thus,the dynamic uniaxial compressive strength(UCS),the dynamic fragmentation characteristics,and the fragmentation energy of FG after these two pretreatment methods can be reasonably compared.The noticeable distinction of loading rate effect on the dynamic UCS of FG between these two pretreatment methods is first observed.A relationship is established between the dynamic UCS and the damage induced by microwave irradiation and heat treatment.Moreover,fragmentation energy fan analysis is introduced to accurately compare the fragmentation properties of FG after two pretreatment methods in dynamic compression tests.

Geochemistry and mineral chemistry of the armoor granitoids,eastern dharwar craton: implications for the redox conditions and tectono-magmatic environment

The mineralogical and geochemical characteristics of the K-rich granites from the Armoor granitic rocks in the northeastern portion of the Eastern Dharwar Craton(EDC) are presented.In order to understand its physicochemical conditions,the petrogenesis of the granitoid was explained from biotite chemistry and geochemical systematics.Studies of mineral chemistry expose that compositionally,K-feldspar and plagioclase in Armoor granite rocks range from An0,Ab_(3-5.9),Or_(94-96.9) and An_(5-29,-Ab71.9-94.9),Or_(0-1.5),respectively.The mineral chemistry of biotite crystals exhibits composition that varies from primary to re-equilibrated primary biotites.Although biotites from the Armoor granites generally exhibit an I-type trend,with calc-alkaline parental magma in a subduction setting.Biotite chemistry of granites displays magnetite(oxidized)series nature,which has oxygen fugacity(fO_(2))=-15.1 to-16.7(log_(10) bar),under high oxidizing conditions.Temperature and pressure estimates for the crystallization of Armoor granites based on biotite composition are T=612-716 ℃ and 1.0-0.4 kbar,respectively.Geochemically,these rocks are metaluminous to slightly peraluminous and magnesian,with calc-alkaline potassiumrich granite.On the chondrite normalized REE diagram,the granites have positive europium anomalies;rich Sr/Y,(Dy/Yb)_(N) ratios and reduced Mg#,Rb/Sr,Rb,Sr indicate that the melting of earlier rocks,crystal accumulation and residual garnet source formed at high pressures.The examined granites show that they are produced from the melting of crustal sources.Thus,the extensive analyses of the described Armoor granite suggest that they were produced by crust sources and developed under oxidizing conditions in subduction setting.

The late Early-Paleozoic granitic magmatism in Northwestern Fujian, China: constraints on intraplate orogeny in the South China block

The Early Paleozoic tectono-thermal event was a significant orogenic activity during the Phanerozoic era,which had a profound impact on the early crust of the South China Block(SCB) and established the foundation for later tectonic activity.The Wuyi-Yunkai orogenic belt in Southeastern China was extensively exposed to Early Paleozoic magmatism,the genetic mechanism of which remains controversial.To shed light on this issue,detailed petrological,geochemical,and zircon U-Pb-Hf isotopic studies were carried out on two granitoids,namely the Yuntongshan pluton and the Gaoqiao pluton,identified in the central Wuyishan.Zircon U-Pb chronology of the Yuntongshan and Gaoqiao bodies yielded ages of437±4 Ma(MSWD=2.2) and 404±2 Ma(MSWD=12),respectively,indicating that they were emplaced during the Early Silurian and Early Devonian periods.These granitoids are primarily composed of biotite-granite and biotite-monzonitic-granites,with high concentrations of S_(i)O_(2)(73.59-75.91 wt%),K_(2)O+Na_(2)O(8.31-8.73wt%),and low contents of MgO,CaO,Cr,Ni.They are classified as high-K calc-alkaline and weakly metaluminous-strongly peraluminous S-type granites.These granitoids are enriched in light rare earth elements(LREEs) and large ion lithophile elements(LILEs) and depleted in heavy rare earth elements(HREEs) and high field strength elements(HFSEs) with arc affinity.The εHf(t) values of-3.3 to-15.4 with two-stage Hf model ages ranging from 2829 to 1644 Ma,combined with the presence of Neoproterozoic inherited zircons,suggest that the primary magma of these granitoids was derived from the partial melting of Neoproterozoic crust with a Paleoproterozoic crustal model age.These findings,combined with the spatio-temporal distribution of regional magmatism,reveal that the late Early-Paleozoic granitoids formed in the intraplate orogenic background originating from the subduction of the proto-Tethys Ocean and proto-Pacific Ocean around the margin of the east Gondwana supercontinent.

Petrogenesis and Tectonic Significance of Shenxianshui Alkaline Granite in Gejiu,Yunnan Province,China

The Shenxianshui granites in the western Gejiu area were formed in the Late Cretaceous.Laser ablation inductively coupled plasma mass spectrometry indicates zircon U-Pb ages ranging from 90.67±0.7 to 85.97±0.6 Ma.The intrusive rocks are peraluminous(A/CNK=1.03 to 1.33)and calc-alkaline,showing an affinity towards I-type granite.Large ion lithophilic elements are enriched in K and Rb,while high field strength elements are depleted.Moreover,light rare earth elements are significantly enriched,showing a slight negative Eu anomaly(Eu/Eu^(*)=0.39 to 0.58).Shenxianshui granite has a relatively high initial Sr isotope ratio(^(87)Sr/^(86)Sr)_(i)(0.7098-0.7105),negative ε_(Nd)(t)values(−7.99 to−7.44)and negative ε_(Hf)(t)values(−8.37 to−2.58).Combined with previous studies,these characteristics suggest that the Shenxianshui alkaline granites were formed in a post-collision extensional environment.The alkaline granitic magma possibly originated from the partial melting of the lower crust during the Mesoproterozoic era and may have contained mantle source materials.Shenxianshui alkaline granite was formed from mixed magma with a high degree of crystal differentiation.The abundance of ore-forming elements indicates that Shenxianshui granite has the potential to mineralize key metals and rare earth elements.

Is the Cape Stone Forest in Shantou City formed by wave erosion? A comparison of the pedestal rocks on the coasts and the mountains of Queshi in eastern Guangdong, China

Cape Stone Forest is a group of granite rock pillars(pedestal rocks) towering over Shilin Lake, on the southern shore of Shantou Bay in eastern Guangdong, China. The rock pillars were previously identified as sea stacks because they have marine notch-like concave sidewalls at their base, and more importantly, the lake is immediately adjacent to the bay, which is exposed to the open sea. However, rock pillars similar in shape and size can also be found at the top of Queshi Mountain, which is only about 300 meters northwest of the lake and about 85 meters above sea level. Therefore, the marine origin of Cape Stone Forest is seriously questioned. In this study, 3D imagery and drone technology were used to collect data in the investigations without direct manual measurements in the water or on the mountain. It shows that the concave sidewalls of the rock pillars in the lake and on the mountains occur at different heights and are exposed to different directions, while a natural sea stack on Mayu Island at the mouth of Shantou Bay has a horizontal notch parallel to the sea level, although the granite rock of the sea stack is the same as that of the lake and the mountains. The eastern side of the island, where the sea stack is located, is exposed to the open sea but blocks large waves for the rock pillars in the lake. Therefore, the origin of Cape Stone Forest cannot be explained by wave-based mechanisms. The only satisfactory explanation that takes into account all the field evidence is that the narrow rock pillars of the lake and mountain were formed by chemical weathering that penetrated closely the spaced joints of the granite rock, and the notch-like concave sidewalls were formed by more effective chemical weathering at the base of the pillars.

Spalling characteristics of high-temperature treated granitic rock at different strain rates

The dynamic spalling characteristics of rock are important for stability analysis in rock engineering.This paper presented an experimental investigation on the dynamic spalling characteristics of granite with different temperatures and strain rates.A series of dynamic spalling tests with different impact velocities were conducted on thermally treated granite at different temperatures.The dynamic spalling strengths of granite with different temperatures and strain rates were determined.A model was proposed to correlate the dynamic spalling strength of granite,high temperature and strain rate.The results show that the spalling strength of granite decreases with increasing temperature.Moreover,the spalling strength of granite with a higher strain rate is larger than that with a lower strain rate.The proposed model can describe the relationship among dynamic spalling strength of granite,high temperature and strain rate.

U-Pb zircon ages and petrogeochemistry and tectonic implications of gabbro and granite in southwest Lahad Datu area of Sabah, Malaysia

The southwest Lahad Datu felsic rocks were previously thought to have formed in the late Triassic as part of the microcontinental crystalline basement.Based on U-Pb ages,geochemistry,and the Hfisotopes of zircon from the southeastern Sabah gabbro and granite,in this study,the tectonic properties of the Sabah area during the Triassic were investigated.The weighted average U-Pb zircon ages of the gabbro and granite samples were determined to be(230.9±2.5)Ma and(207.1±3.3)Ma,respectively.The granite had SiO_(2) contents of 66.54%-79.47%,low TiO_(2) contents of 0.08%-0.3%,Al_(2)O_(3) contents of 10.97%-16.22%,Na_(2)O contents of 5.91 %-6.39%,and low K_(2)O contents of 0.15%-0.65%.The chondrite-normalized rare earth element(REE) patterns exhibit light REE enrichment,with right-sloping curves.The primitive mantle-normalized trace element spider diagrams exhibit Th,U,La,Sr,and Zr enrichment and Nb,Ta,P and Ti depletions,i.e.,the geochemical characteristics of typical island arc igneous rocks.The tectonic discriminant diagram indicates that the granite is a volcanic arc granite.The Hf isotopic an alysis of gabbro zircon revealed that the zircons have ε_(Hf)(t)values of 12.08-16.24(mean of 14.32) and two-stage model ages(t_(DM2)) of 223-491 Ma(mean of 347 Ma).This indicates that the diagenetic magma of the gabbro was mainly derived from melting of newly formed crustal materials.The ophiolite in southeast Sabah has existed since the early Late Triassic.The crystalline basement granite in southeastern S abah was emplaced lasted from late Triassic to early Cretaceous.Based on previous studies and global plate reconstruction models,it is speculated that the southeastern Sabah granite may have been formed in an island arc setting,i.e.,where the oceanic crust of the Paleo-Tethys Ocean collided with the oceanic crust of the Panthalassa Ocean.

Prediction and critical transition mechanism for granite fracture:Insights from critical slowing down theory

Rock fracture warning is one of the significant challenges in rock mechanics.Many true triaxial and synchronous acoustic emission(AE)tests were conducted on granite samples.The investigation focused on the characteristics of AE signals preceding granite fracture,based on the critical slowing down(CSD)theory.The granite undergoes a transition from the stable phase to the fracture phase and exhibits a clear CSD phenomenon,characterized by a pronounced increase in variance and autocorrelation coefficient.The variance mutation points were found to be more identifiable and suitable as the primary criterion for predicting precursor information related to granite fracture,compared to the autocorrelation coefficient.It is noteworthy to emphasize that the CSD factor holds greater potential in elucidating the underlying mechanisms responsible for the critical transition of granite fracture,in comparison to the AE timing parameters.Furthermore,a novel multi-parameter collaborative prediction method for rock fracture was developed by comprehensively analyzing predictive information,including abnormal variation modes and the CSD factor of AE characteristic parameters.This method enhances the understanding and prediction of rock fracture-related geohazards.

Mechanical properties and energy evolution of Beishan shallow-layer granite under different unloading paths

Rock has mechanical characteristics and a fracture damage mechanism that are closely related to its loading history and loading path. The mechanical properties, fracture damage features, acoustic emission(AE) characteristics, and strain energy evolution of the Beishan shallow-layer granite used in triaxial unloading tests were investigated in this study. Three groups of triaxial tests, namely, conventional triaxial compression test(Group Ⅰ), maintaining deviatoric stress synchronously unloading confining pressure test(Group Ⅱ), and loading axial pressure synchronously unloading confining pressure test(Group Ⅲ), were carried out for the cylindrical granite specimens. AE monitoring device was utilized in these tests to determine the degree to which the AE waves and AE events reflected the degree of rock damage. In addition, the crack stress thresholds of the specimens were determined by volumetric strain method and AE parameter method, and strain energy evolution of the rock was explored in different damage stages. The results show that the shallow-layer granite experiences brittle failure during the triaxial loading test and unloading test, and the rock has a greater damage degree during the unloading test. The crack stress thresholds of these samples vary greatly between tests, but the threshold ratios of all samples are similar in the same crack damage stage. The Mogi-Coulomb strength criterion can better describe the unloading failure strength of the rock. The evolution of the AE parameter characteristics and strain energy differs between the specimens used in different stress path tests. The dissipative strain energy is the largest in Group Ⅱ and the smallest in Group Ⅰ.

Investigation of granite failure precursor under axial load using modified LSTM framework

Granite is usually composed of quartz,biotite,feldspar,and cracks,and the variation characteristics of these components could reflect the deformation and failure process of rock well.Taking granite as an example,the video camera was used to record the deformation and failure process of rock.The distribution of meso-components in video images was then identified.The meso-components of rock failure precursors were also discussed.Moreover,a modified LSTM(long short-term memory method)based on SSA(sparrow search algorithm)was proposed to estimate the change of meso-components of rock failure precursor.It shows that the initiation and expansion of cracks are mainly caused by feldspar and quartz fracture,and when the quartz and feldspar exit the stress framework,rock failure occurs;the second large increase of crack area and the second large decrease of quartz or feldspar area may be used as a precursor of rock failure;the precursor time of rock failure based on meso-scopic components is about 4 s earlier than that observed by the naked eye;the modified LSTM network has the strongest estimation ability for quartz area change,followed by feldspar and biotite,and has the worst estimation ability for cracks;when using the modified LSTM network to predict the precursors of rock instability and failure,quartz and feldspar could be given priority.The results presented herein may provide reference in the investigation of rock failure mechanism.

Field testing of shear strength of granite residual soils

The characteristics of residual soils are very different from those of sedimentary soils.Although the strength characteristics of sedimentary soils have been studied extensively,the shear strength characteristics of granitic residual soils(GRS)subjected to the weathering of parent rocks have rarely been investigated.In this study,the shear strength characteristics of GRS in the Taishan area of southeast China(TSGRS)were studied by field and laboratory tests.The field tests consisted of a cone penetration test(CPT),borehole shear test(BST),self-boring pressuremeter test(SBPT),and seismic dilatometer Marchetti test(SDMT).The shortcomings of laboratory testing are obvious,with potential disturbances arising through the sampling,transportation,and preparation of soil samples.Due to the special structure of GRS samples and the ease of disturbance,the results obtained from laboratory tests were generally lower than those obtained from situ tests.The CPT and scanning electron microscopy(SEM)results indicated significant weathering and crustal hardening in the shallow TSGRS.This resulted in significant differences in the strength and strength parameters of shallow soil obtained by the BST.Based on the SDMT and SBPT results,a comprehensive evaluation method of shear strength for TSGRS was proposed.The SBPT was suitable for evaluating the strength of shallow GRS.The material index(ID)and horizontal stress index(KD)values obtained by the SDMT satisfied the empirical relationship proposed by Marchetti based on the ID index,and were therefore considered suitable for the evaluation of the shear strength of deep GRS.

Source Enrichment Control on the Scale of Magmatic-Hydrothermal W-Sn Mineralization:Insights from Triassic and Jurassic Magma Reservoirs in the Continental Crust,Xitian,South China

There are two factors,source composition and magmatic differentiation,potentially controlling W-Sn mineralization.Which one is more important is widely debated and may need to be determined for each individual deposit.The Xitian granite batholith located in South China is a natural laboratory for investigating the above problem.It consists essentially of two separate components,formed in the Triassic at ca.226 Ma and Jurassic at ca.152 Ma,respectively.The Triassic and Jurassic rocks are both composed of porphyritic and fine-grained phases.The latter resulted from highlydifferentiated porphyritic ones but they have similar textural characteristics and mineral assemblages,indicating that they reached a similar degree of crystal fractionation.Although both fine-grained phases are highly differentiated with elevated rare metal contents,economic W–Sn mineralization is rare in the Triassic granitoids and this can be attributed to less fertile source materials than their Jurassic counterparts,with a slightly more enriched isotopic signature and whole-rockεNd(226 Ma)of−10.4 to−9.2(2σ=0.2)compared withεNd(152 Ma)of−9.2 to−8.2(2σ=0.2)for the Jurassic rocks.The initial W-Sn enrichment was derived from the metasedimentary rocks and strongly enhanced by reworking of the continental crust,culminating in the Jurassic.

Effects of soil crust on the collapsing erosion of colluvial deposits with granite residual soil

Collapsing erosion is a unique phenomenon commonly observed on the granite residue hillslopes in the tropical and subtropical regions of southern China,characterized by its abrupt occurrence and significant erosion volumes.However,the impacts of soil crust conditions on the erosion of colluvial deposits with granite residual soils have only been studied to a limited extent.To address this issue,this study investigates the impacts of three soil crust conditions(i.e.,without crust,10-minute crust,and 20-minute crust)on gully morphology,rainfall infiltration,and runoff and sediment yield during slope erosion of colluvial deposits with granite residues(classified as Acrisols)in Yudu County,Ganzhou City,Jiangxi Province,China,using simulated rainfall tests and photographic methods.The results showed that as the strength of the soil crust increased,the capacity of moisture infiltration and the width and depth of the gully as well as the sediment concentration and yield ratio decreased;at the same time,the runoff ratio increased.The sediment yield in the without-crust test was found to be 1.24 and 1.43 times higher than that observed in the 10-minute crust and 20-minute crust tests,respectively.These results indicate that soil crusts can effectively prevent slope erosion and moisture infiltration,while providing valuable insights for the management of soil erosion in natural environments.