In order to investigate the influence of processing parameters on the granularity distribution of superalloy powders during the atomization of plasma rotating electrode processing (PREP), in this paper FGH95 superallo...In order to investigate the influence of processing parameters on the granularity distribution of superalloy powders during the atomization of plasma rotating electrode processing (PREP), in this paper FGH95 superalloy powders is prepared under different processing conditions by PREP and the influence of PREP processing parameters on the granularity distribution of FGH95 superalloy powders is discussed based on fractal geometry theory. The results show that with the increase of rotating velocity of the self-consuming electrode, the fractal dimension of the granularity distribution increases linearly, which results in the increase of the proportion of smaller powders. The change of interval between plasma gun and the self-consuming electrode has a little effect on the granularity distribution, also the fractal dimension of the granularity distribution changed a little correspondingly.展开更多
Experiment about ultrafine comminution in theory of vertiginous current of bulk material has successfully performed by a lately developed vertical shaft centrifugal autogenous grinder. The results of tested several ma...Experiment about ultrafine comminution in theory of vertiginous current of bulk material has successfully performed by a lately developed vertical shaft centrifugal autogenous grinder. The results of tested several materials are analyzed, moreover. the comminution mechanism and the affecting factors of ultrafine comminution are analyzed.展开更多
A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature, The authors present governing equations for stress and velocity fields under a radial- flow assumption i...A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature, The authors present governing equations for stress and velocity fields under a radial- flow assumption in a converging hopper. The velocity in the silo above the hopper is modelled as plug flow, Two set-ups are modelled, one where powder layers in the hopper are assumed to be flat, and the second in which the layers are heaped at some characteristic angle, The ejection times and residence-time distributions are calculated and presented for a range of heap angles. For realistic heap angles, the spread of the residence-time distribution decreases with increasing heap angle; in one case, the spread is halved to a well-defined limit. At this limit （the critical heap angle） the geometry of the hopper can be optimised to minimise the spread of the residence-time distribution, and hence to minimise predicted mixing in the system. We present examples of curves for a variety of parameters that minimise the predicted mixing in the hopper-silo system.展开更多
We present experimental investigations and numerical simulations of a pseudo-2D riser. Experiments were performed for various airflow rates, particle types/diameters, and particle size distributions. Pres- sure distri...We present experimental investigations and numerical simulations of a pseudo-2D riser. Experiments were performed for various airflow rates, particle types/diameters, and particle size distributions. Pres- sure distributions along the wall of the riser were measured, Additional measurements from a smaller pseudo-2D riser （Kallio et al., 2009; Shah et al., 2012） were used to analyze horizontal solids volume fraction profiles. The experimental data were compared with simulation results carried out using an Euler-Euler approach, A mesh sensitivity study was conducted for numerical simulations and effects associated with simplifying real 3D geometry to a 2D model were examined. In addition, the effect of using an algebraic equation to represent the granular temperature versus a full partial differential equation also was examined for numerical simulations. Results showed small but significant near-wall sensitivity of the flow variables to mesh size. Substantial differences in mean pressure, solids distribution, and solid velocities were obtained, when 2D and 3D simulation results were compared. Finally, applying the simplified granular temperature equation for turbulent fluidization and for dilute-phase transport can lead to incorrect predictions in models,展开更多
文摘In order to investigate the influence of processing parameters on the granularity distribution of superalloy powders during the atomization of plasma rotating electrode processing (PREP), in this paper FGH95 superalloy powders is prepared under different processing conditions by PREP and the influence of PREP processing parameters on the granularity distribution of FGH95 superalloy powders is discussed based on fractal geometry theory. The results show that with the increase of rotating velocity of the self-consuming electrode, the fractal dimension of the granularity distribution increases linearly, which results in the increase of the proportion of smaller powders. The change of interval between plasma gun and the self-consuming electrode has a little effect on the granularity distribution, also the fractal dimension of the granularity distribution changed a little correspondingly.
文摘Experiment about ultrafine comminution in theory of vertiginous current of bulk material has successfully performed by a lately developed vertical shaft centrifugal autogenous grinder. The results of tested several materials are analyzed, moreover. the comminution mechanism and the affecting factors of ultrafine comminution are analyzed.
文摘A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature, The authors present governing equations for stress and velocity fields under a radial- flow assumption in a converging hopper. The velocity in the silo above the hopper is modelled as plug flow, Two set-ups are modelled, one where powder layers in the hopper are assumed to be flat, and the second in which the layers are heaped at some characteristic angle, The ejection times and residence-time distributions are calculated and presented for a range of heap angles. For realistic heap angles, the spread of the residence-time distribution decreases with increasing heap angle; in one case, the spread is halved to a well-defined limit. At this limit （the critical heap angle） the geometry of the hopper can be optimised to minimise the spread of the residence-time distribution, and hence to minimise predicted mixing in the system. We present examples of curves for a variety of parameters that minimise the predicted mixing in the hopper-silo system.
文摘We present experimental investigations and numerical simulations of a pseudo-2D riser. Experiments were performed for various airflow rates, particle types/diameters, and particle size distributions. Pres- sure distributions along the wall of the riser were measured, Additional measurements from a smaller pseudo-2D riser （Kallio et al., 2009; Shah et al., 2012） were used to analyze horizontal solids volume fraction profiles. The experimental data were compared with simulation results carried out using an Euler-Euler approach, A mesh sensitivity study was conducted for numerical simulations and effects associated with simplifying real 3D geometry to a 2D model were examined. In addition, the effect of using an algebraic equation to represent the granular temperature versus a full partial differential equation also was examined for numerical simulations. Results showed small but significant near-wall sensitivity of the flow variables to mesh size. Substantial differences in mean pressure, solids distribution, and solid velocities were obtained, when 2D and 3D simulation results were compared. Finally, applying the simplified granular temperature equation for turbulent fluidization and for dilute-phase transport can lead to incorrect predictions in models,
