N-doped graphene quantum dot-decorated N-TiO2/P-doped porous hollow g-C_(3)N_(4) nanotube composite photocatalysts for antibiotic photodegradation and H2 production

Exclusive responsiveness to ultraviolet light (~3.2 eV) and high photogenerated charge recombination rate are the two primary drawbacks of pure TiO_(2). We combined N-doped graphene quantum dots (N-GQDs), morphology regulation, and heterojunction construction strategies to synthesize N-GQD/N-doped TiO_(2)/P-doped porous hollow g-C_(3)N_(4) nanotube (PCN) composite photocatalysts (denoted as G-TPCN). The optimal sample (G-TPCN doped with 0.1wt% N-GQD, denoted as 0.1% G-TPCN) exhibits significantly enhanced photoabsorption, which is attributed to the change in bandgap caused by elemental doping (P and N), the improved light-harvesting resulting from the tube structure, and the upconversion effect of N-GQDs. In addition, the internal charge separation and transfer capability of0.1% G-TPCN are dramatically boosted, and its carrier concentration is 3.7, 2.3, and 1.9 times that of N-TiO_(2), PCN, and N-TiO_(2)/PCN(TPCN-1), respectively. This phenomenon is attributed to the formation of Z-scheme heterojunction between N-TiO_(2) and PCNs, the excellent electron conduction ability of N-GQDs, and the short transfer distance caused by the porous nanotube structure. Compared with those of N-TiO_(2), PCNs, and TPCN-1, the H2 production activity of 0.1%G-TPCN under visible light is enhanced by 12.4, 2.3, and 1.4times, respectively, and its ciprofloxacin (CIP) degradation rate is increased by 7.9, 5.7, and 2.9 times, respectively. The optimized performance benefits from excellent photoresponsiveness and improved carrier separation and migration efficiencies. Finally, the photocatalytic mechanism of 0.1% G-TPCN and five possible degradation pathways of CIP are proposed. This study clarifies the mechanism of multiple modification strategies to synergistically improve the photocatalytic performance of 0.1% G-TPCN and provides a potential strategy for rationally designing novel photocatalysts for environmental remediation and solar energy conversion.

Fabrication of a novel electrochemical sensor based on MnFe_(2)O_(4)/graphene modified glassy carbon electrode for the sensitive detection of bisphenol A

Manganese ferrite(MnFe_(2)O_(4))has the advantages of simple preparation,high resistivity,and high crystal symmetry.Herein,we have developed an electrochemical sensor utilizing graphene and MnFe_(2)O_(4) nanocomposites modified glassy carbon electrode(GCE),which is very efficient and sensitive to detect bisphenol A(BPA).MnFe_(2)O_(4)/graphene(GR)was synthesized by immobilizing the MnFe_(2)O_(4) microspheres on the graphene nanosheets via a simple one-pot solvothermal method.The morphology and structure of the MnFe_(2)O_(4)/GR nanocomposite have been characterized through scanning electron microscopy(SEM),Fourier transform infrared spectroscopy(FT-IR),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS).In addition,electrochemical properties of the modified materials are comparably explored by means of cyclic voltammetry(CV),electrochemical impedance spectroscopy(EIS)and differential pulse voltammetry(DPV).Under the optimal conditions,the proposed electrochemical sensor for the detection of BPA has a linear range of 0.8-400μmol/L and a detection limit of 0.0235μmol/L(S/N=3)with high sensitivity,good selectivity and high stability.In addition,the proposed sensor was used to measure the content of BPA in real water samples with a recovery rate of 97.94%-104.56%.At present,the synthesis of MnFe_(2)O_(4)/GR provides more opportunities for the electrochemical detection of BPA in practical applications.

Enhanced reversible hydrogen storage properties of wrinkled graphene microflowers confined LiBH_(4) system with high volumetric hydrogen storage capacity

LiBH_(4)with high hydrogen storage density,is regarded as one of the most promising hydrogen storage materials.Nevertheless,it suffers from high dehydrogenation temperature and poor reversibility for practical use.Nanoconfinement is effective in achieving low dehydrogenation temperature and favorable reversibility.Besides,graphene can serve as supporting materials for LiBH_(4)catalysts and also destabilize LiBH_(4)via interfacial reaction.However,graphene has never been used alone as a frame material for nanoconfining LiBH_(4).In this study,graphene microflowers with large pore volumes were prepared and used as nanoconfinement framework material for LiBH_(4),and the nanoconfinement effect of graphene was revealed.After loading 70 wt%of LiBH_(4) and mechanically compressed at 350 MPa,8.0 wt% of H2 can be released within 100 min at 320C,corresponding to the highest volumetric hydrogen storage density of 94.9 g H2 L^(-1)ever reported.Thanks to the nanoconfinement of graphene,the rate-limiting step of dehydrogenation of nanoconfined LiBH_(4) was changed and its apparent activation energy of the dehydrogenation(107.3 kJ mol^(-1))was 42%lower than that of pure LiBH_(4).Moreover,the formation of the intermediate Li_(2)B_(12)H_(12) was effectively inhibited,and the stable nanoconfined structure enhanced the reversibility of LiBH_(4).This work widens the understanding of graphene's nanoconfinement effect and provides new insights for developing high-density hydrogen storage materials.

MnFe_(2)O_(4)/graphene的制备及其超级电容性能

采用水热法制备了MnFe_(2)O_(4)/石墨烯(MFO/graphene)复合材料。利用XRD、SEM、EDS、循环伏安、计时电位等手段对MFO/graphene的物理与化学性能进行了表征。结果表明:产物为直径约100 nm的MFO颗粒均匀分布于graphene的片层上;MFO/graphene复合材料在3M KOH溶液中表现较好的超级电容特性。由于graphene的引入,提高了MFO材料导电性,进而改善了复合材料的电化学性能,MFO/graphene电极材料在1 A·g^(-1)的电流密度下展现出600 F·g^(-1)的比容量,与MFO相比,比电容提高了近47.1%。

Engineering CoMoO_(4) in reduced graphene oxide as superior cathode hosts for advanced room-temperature sodium-sulfur batteries

Promising room-temperature sodium-sulfur(RT Na-S)battery systems rely on purposely designed highperforming and low-cost electrode materials.Nevertheless,there are the challenges of irreversible dissolution and slow redox kinetics of NaPSs in the complete discharge of sulfur capacity.Herein,engineered CoMoO_(4)in reduced graphene oxide(CoMoO_(4)@rGO)is reported as a class of superior cathode hosts for RT Na-S batteries.The CoMoO_(4)@rGO matrix is designed to facilitate the reversible sodiation and desodiation of sulfur,considering the strong chemisorption between sulfur(and short-chain sodium sulfides)and CoMoO_(4),which alleviates the shuttle effect of sodium sulfides and accelerates the electrochemical reaction rate at RT.The obtained S/CoMoO_(4)@rGO cathode with~52%S loading exhibits a high capacity of520.1 mA h g^(-1)after 100 cycles at 0.1 A g^(-1).Moreover,an enhanced long-term performance at high current densities(212.2 mA h g^(-1)at 4 A g^(-1)over 1000 cycles)with high Coulombic efficiency(~100%)is also achieved.This work demonstrates a novel multifunctional additive for RT Na-S battery cathodes,which is expected to promote the long-waited development towards practical applications of RT Na-S batteries.

Synthesis of BiVO_4 nanosheets-graphene composites toward improved visible light photoactivity

Two-dimensional （2-D） BiVO4 nanosheets-graphene （GR） composites with different weight addition ratios of GR have been prepared via a facile wet chemistry process. X-ray diffraction （XRD）, Raman spectra, X-ray photoelectron spectra （XPS）, UV-vis diffuse reflectance spectra （DRS）, field-emission scanning electron microscopy （FE-SEM）, transmission electron microscopy （TEM）, nitrogen adsorption-desorption, transient photocurrent response and photoluminescence （PL） spectra were employed to determine the properties of the samples. It is found that BiVO4 nanosheets could pave well on the surface of graphene sheets. BiVO4 nanosheets-GR composites with a proper addition amount of GR exhibited higher photocatalytic activity than bare BiVO4 nanosheets toward liquid-phase degradation of rhodamine B （RhB） and methyl orange （MO） under visible light irradiation. The enhancement of photocatalytic activities of BiVO4 nanosheets-GR composites can be attributed to the effective separation of photoexcited electron-hole pairs. This work not only provides a simple strategy for fabricating specific 2-D semiconductor-2-D GR composites, but also opens a new window of such 2-D semiconductor-2-D GR composites as visible light photocatalysts toward an improved visible light photoactivity in purifying polluted water resources.

Co_3O_4 nanoparticles assembled on polypyrrole/graphene oxide for electrochemical reduction of oxygen in alkaline media

The development of highly efficient catalysts for cathodes remains an important objective of fuel cell research. Here, we report Co3O4 nanoparticles assembled on a polypyrrole/graphene oxide electrocatalyst （Co3O4/Ppy/GO） as an efficient catalyst for the oxygen reduction reaction （ORR） in alkaline media. The catalyst was prepared via the hydrothermal reaction of Co2＋ ions with Ppy-modified GO. The GO, Ppy/GO, and Co3O4/Ppy/GO were characterized using scanning electron microscopy, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The incorporation of Ppy into GO nanosheets resulted in the formation of a nitrogen-modified GO po-rous structure, which acted as an efficient electron-transport network for the ORR. With further anchoring of Co3O4 on Ppy/GO, the as-prepared Co3O4/Ppy/GO exhibited excellent ORR activity and followed a four-electron route mechanism for the ORR in alkaline solution. An onset potential of -0.10 V vs. a saturated calomel electrode and a diffusion limiting current density of 2.30 mA/cm^2 were achieved for the Co3O4/Ppy/GO catalyst heated at 800 ℃; these values are comparable to those for noble-metal-based Pt/C catalysts. Our work demonstrates that Co3O4/Ppy/GO is highly active for the ORR. Notably, the Ppy coupling effects between Co3O4 and GO provide a new route for the preparation of efficient non-precious electrocatalysts with hierarchical porous structures for fuel cell applications.

锂离子负极材料NiFe_2O_4/Graphene复合材料的制备和电化学性能

通过水热法合成了NiFe2O4/Graphene纳米复合材料,采用XRD和SEM对其晶相结构和形貌进行了表征,并将其作为锂离子电池活性材料组装成模拟电池,考查电化学性能。结果表明NiFe2O4/Graphene复合材料在100mA/g的电流密度下首次放电容量达970mAh/g,循环20次后,容量保持在668mAh/g,相比纯的NiFe2O4,具有较好的循环稳定性,这种优异的电化学性能归因于复合材料的纳米结构和NiFe2O4与Graphene的协同作用。

Magnetic Fe_3O_4-Reduced Graphene Oxide Nanocomposites-Based Electrochemical Biosensing

An electrochemical biosensing platform was developed based on glucose oxidase(GOx)/Fe3O4-reduced graphene oxide(Fe3O4-RGO) nanosheets loaded on the magnetic glassy carbon electrode(MGCE).With the advantages of the magnetism, conductivity and biocompatibility of the Fe3O4-RGO nanosheets, the nanocomposites could be facilely adhered to the electrode surface by magnetically controllable assembling and beneficial to achieve the direct redox reactions and electrocatalytic behaviors of GOx immobilized into the nanocomposites. The biosensor exhibited good electrocatalytic activity, high sensitivity and stability. The current response is linear over glucose concentration ranging from 0.05 to 1.5 m M with a low detection limit of0.15 μM. Meanwhile, validation of the applicability of the biosensor was carried out by determining glucose in serum samples. The proposed protocol is simple, inexpensive and convenient, which shows great potential in biosensing application.

Enhanced visible-light photocatalytic degradation and disinfection performance of oxidized nanoporous g-C3N4 via decoration with graphene oxide quantum dots

Oxidized nanoporous g-C3N4(PCNO)decorated with graphene oxide quantum dots(ox-GQDs)was successfully prepared by a facile self-assembly method.As co-catalysts,the ultrasmall zero-dimensional(0 D)ox-GQDs can achieve uniform dispersion on the surface/inner channels of PCNO,as well as intimate contact with PCNO through hydrogen bonding,π-π,and chemical bonding interactions.In contrast with PCNO,the ox-GQDs/PCNO composite photocatalysts possessed improved light-harvesting ability,higher charge-transfer efficiency,enhanced photooxidation capacity,and increased amounts of reactive species due to the upconversion properties,strong electron capturing ability,and peroxidase-like activity of the ox-GQDs.Therefore,the visible-light photocatalytic degradation and disinfection performances of the ox-GQDs/PCNO composite were significantly enhanced.Remarkably,the composite with a 0.2 wt.% deposited amount of ox-GQDs(ox-GQDs-0.2%/PCNO)exhibited optimum amaranth photodegradation activity,with a corresponding rate about 3.1 times as high as that of PCNO.In addition,ox-GQDs-0.2%/PCNO could inactivate about 99.6%of Escherichia coli(E.coli)cells after 4 h of visible light irradiation,whereas only^31.9% of E.coli cells were killed by PCNO.Furthermore,h+,·O2-,and·OH were determined to be the reactive species generated in the photocatalytic process of the ox-GQDs/PCNO system;these species can thoroughly mineralize azo dyes and effectively inactivate pathogenic bacteria.

Preparation of BiPO4/graphene photoelectrode and its photoelectrocatalyitic performance

In this work, a two-step electrodeposition method was employed to prepare BiPO4 nanorod/reduced graphene oxide/FTO composite electrodes(BiPO4/r GO/FTO). The BiPO4/r GO/FTO composite electrode showed the higher photoelectrocatalytic(PEC) activity for the removal of methyl orange than pure BiPO4, which was 2.8 times higher than that of BiPO4/FTO electrode. The effects of working voltage and BiPO4 deposition time on the degradation efficiency of methyl orange were investigated. The optimum BiPO4 deposition time was 45 min and the optimum working voltage was 1.2 V. The trapping experiments showed that hydroxyl radicals(·OH) and superoxide radicals(·O2-) were the major reactive species in PEC degradation process. The BiPO4/r GO/FTO composite electrode showed the high stability and its methyl orange removal efficiency remained unchanged after four testing cycles. The reasons for the enhanced PEC efficiency of the BiPO4/r GO/FTO composite electrode was ascribed to the broad visible-light absorption range, the rapid transmission of photogenerated charges, and the mixed BiPO4 phase by the introduction of r GO in the composite electrode films.

TMN4 complex embedded graphene as bifunctional electrocatalysts for high efficiency OER/ORR

Developing highly active bifunctional electrocatalysts for oxygen evolution reaction(OER)and oxygen reduction reaction(ORR)is of great significance in energy conversion and storage technologies.In this study,we systematically investigated the OER/ORR electrocatalytic activity of TMN_(4)@G system by using density functional theory(DFT)calculations.Globally,IrN_(4)@G is a very promising bifunctional catalyst for both OER and ORR with the extremely low overpotentials of 0.30 and 0.26 V,respectively.Such outstanding electrocatalytic performance is mainly attributed to the synergistic effect of Ir and N.More importantly,by constructing 2D activity volcano plots,we obtained the limiting overpotentials of TMN_(4)@G system with the values of 0.26 V for OER and 0.24 V for ORR.These findings open up new opportunities for further exploring graphene-based materials for highly efficient OER/ORR electrocatalysts.

Sn_(4)P_(3)nanoparticles confined in multilayer graphene sheets as a high-performance anode material for potassium-ion batteries

Phosphorus-based anodes are highly promising for potassium-ion batteries(PIBs)because of their large theoretical capacities.Nevertheless,the inferior potassium storage properties caused by the poor electronic conductivity,easy self-aggregation,and huge volumetric changes upon cycling process restrain their practical applications.Now we impregnate Sn_(4)P_(3)nanoparticles within multilayer graphene sheets(Sn_(4)P_(3)/MGS)as the anode material for PIBs,greatly improving its potassium storage performance.Specifically,the graphene sheets can efficiently suppress the aggregation of Sn_(4)P_(3)nanoparticles,enhance the electronic conductivity,and sustain the structural integrity.In addition,plenty of Sn_(4)P_(3)nanoparticles impregnated in MGS offer a large accessible area for the electrolyte,which decreases the diffusion distance for K^(+)and electrons upon K^(+)insertion/extraction,resulting in an improved rate capability.Consequently,the optimized Sn_(4)P_(3)/MGS containing 80 wt%Sn_(4)P_(3)(Sn_(4)P_(3)/MGS-80)exhibits a high reversible capacity of 378.2 and 260.2 m Ah g;at 0.1 and 1 A g^(-1),respectively,and still delivers a large capacity retention of 76.6%after the 1000th cycle at 0.5 A g^(-1).

Graphene-wrapped Ag3PO4/LaCO3OH heterostructures for water purification under visible light

We demonstrated a unique synthesis approach of graphene（GR）-wrapped AgPO/LaCOOH（APO/LCO）heterostructures by an in-situ wet chemical method. FESEM analysis reveals the formation of rhombic dodecahedrons of APO decorated with LCO and later wrapped with GR flakes. Optical studies shows two absorption edges corresponding to the band gap energies of APO（2.41 eV） and LCO（4.1 eV）. Considering the absorption edge of the heterostructures in the visible region, the photocatalytic activities of photocatalysts containing different APO/LCO mass ratios were evaluated by the degradation of MB. GR-decorated composite with 20% LCO（APO/LCO20/GR） exhibited the highest photocatalytic activity for MB degradation, with a rate constant, k of 0.541 min. The photocatalytic activity of APO/LCO20/GR more greatly enhanced than those of the individual constituents（APO, LCO, APO/LCO20）. The enhanced photocatalytic activity of the heterostructure can be attributed to the co-catalytic effect of LCO as well as intriguing physicochemical properties of GR. To understand the enhanced photocatalytic activity of the heterostructures the photocatalytic reaction mechanism is proposed in detail. The recyclability of the APO/LCO/GR composite photocatalyst is further evaluated by reusing the catalyst in replicate photocatalytic experiments which shows consistent photocatalytic activity thereby confirms the stability and reusability of heterostructure photocatalyst.

Facile synthesis of KVPO_(4)F/reduced graphene oxide hybrid as a high-performance cathode material for potassium-ion batteries

Potassium-ion batteries(PIBs) as a substitute for lithium-ion batteries have aroused widespread attention and have been rapidly developed. In the positive electrode materials, polyanionic compound has a high working voltage and large reversible capacity on account of its distinct framework and the strong inducing effect of the anionic group. Herein, a KVPO_(4)F/reduced graphene oxide(KVPF/r GO) hybrid was fabricated via a simple multi-step approach as the polyanionic cathode material for PIBs. Profiting from the small size of KVPF nanoparticles and their uniform distribution in the r GO framework, the assynthesized KVPF/r GO hybrid manifests a large discharge capacity of 103.2 mAh g^(-1) with an outstanding energy density of 436.5 Wh kg^(-1). Through r GO decoration, the hybrid also demonstrates remarkable rate and cycling properties. By employing ex-situ X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS) techniques, the potassium storage mechanism of KVPF was clearly revealed. The facile preparation procedure and superior properties endow it great application prospects in large-scale energy storage.

Reduced Graphene Oxide Coupled Magnetic CuFe2O4-TiO2 Nanoparticles with Enhanced Photocatalytic Activity for Methylene Blue Degradation

CuFe_2O_4-TiO_2/graphene nanocomposites have been prepared via a one-step hydrothermal method,and the as-prepared CuFe_2O_4-TiO_2/graphene was characterized by X-ray powder diffraction,Raman spectroscopy,scanning electron microscopy and transmission electron microscopy.The transmission electron microscopy demonstrated that CuFe_2O_4-TiO_2 nanoparticles were successfully dispersed on the graphene sheets.Photocatalytic activity of nanocomposites was evaluated in terms of degradation of methylene blue（MB） dye solution under visible light radiation.Results showed that the photocatalytic efficiency of CuFe_2O_4-TiO_2/graphene nanocomposites was higher than its individual pure oxides（CuFe_2O_4 or TiO_2） and TiO_2/graphene.The enhancing photocatalytic activity performance of the CuFe_2O_4-TiO_2/graphene nanocomposites may attributed to the mutual effect between the Cu Fe_2O_4,Ti O_2 nanoparticles and the graphene sheets.Moreover,Cu Fe_2O_4 nanoparticles have excellent magnetic property,which makes the CuFe_2O_4-TiO_2/graphene heteroarchitecture magnetically recyclable in a suspension system.

Fe_(3)O_(4)纳米粒子的制备及载药释放性能研究

采用改进的Hummers法获得氧化石墨烯(GO),通过共沉淀法制备了GO与磁性Fe_(3)O_(4)纳米粒子结合的GO/Fe_(3)O_(4)复合材料,分析了复合材料的晶体结构、微观形貌、磁化性能和载药性能,研究结果表明:GO/Fe_(3)O_(4)复合材料具有较高的结晶度,GO掺杂改善了Fe_(3)O_(4)颗粒的均匀度,晶粒尺寸为13~15 nm。GO/Fe_(3)O_(4)复合材料表现出超顺磁性,饱和磁化强度有轻微降低。利用GO/Fe_(3)O_(4)负载阿霉素(DOX)研究了载药释放性能,GO/Fe_(3)O_(4)/DOX包合物的DOX包封率均值为62.24%,具有较高的包封率,药物释放具有一定的pH依赖性,在pH=7.4时,GO/Fe_(3)O_(4)的累计释放率在75 h达到73.3%,摄入试验测试表明GO/Fe_(3)O_(4)载体具有一定的靶向性,在生物医学领域有广阔的应用前景。

Monodisperse polar NiCo_(2)O_(4) nanoparticles decorated porous graphene aerogel for high-performance lithium sulfur battery

Lithium sulfur battery(LSB)is a promising energy storage system to meet the increasing energy demands for electric vehicles and smart grid,while its wide commercialization is severely inhibited by the"shuttle effect"of polysulfides,low utilization of sulfur cathode,and safety of lithium anode.To overcome these issues,herein,monodisperse polar NiCo_(2)O_(4)nanoparticles decorated porous graphene aerogel composite(NCO-GA)is proposed.The aerogel composite demonstrates high conductivity,hierarchical porous structure,high chemisorption capacity and excellent electrocatalytic ability,which effectively inhibits the"shuttle effect",promotes the ion/electron transport and increases the reaction kinetics.The NCO-GA/S cathode exhibits high discharge specific capacity(1214.1 mAh g^(-1)at 0.1 C),outstanding rate capability(435.7 mAh g^(-1)at 5 C)and remarkable cycle stability(decay of 0.031%/cycle over 1000 cycles).Quantitative analyses show that the physical adsorption provided by GA mainly contributes to the capacity of NCO-GA/S at low rate,while the chemical adsorption provided by polar NiCo_(2)O_(4)contributes mainly to the capacity of NCO-GA/S with the increase of current density and cycling.This work provides a new strategy for the design of GA-based composite with synergistic adsorption and electrocatalytic activity for the potential applications in LSB and related energy fields.

Preparation and Characterization of Co_(3)O_(4)/Graphene/Cellulose Nanofiber Composite Films

Nanocellulose has served as an eye-catching nanomaterial for constructing advanced functional devices with renewability,light weight,flexibility,and environmental friendliness.In this study,Co_(3)O_(4)/graphene/cellulose nanofiber(CNF)flexible composite films,in which the CNF acted as a spacer for the graphene,were prepared via a facile and scalable vacuum filtration method.The effects of the CNF on the microstructure,hydrophilicity,thermal stability,tensile strength,surface resistance,and electrochemical performance of the Co_(3)O_(4)/graphene/CNF composite films were systematically investigated.The results showed that the synergistic interaction of the CNF and graphene substantially improved the overall properties of the Co_(3)O_(4)/graphene/CNF composite films,particularly their hydrophilicity and tensile strength.Meanwhile,Co_(3)O_(4)/graphene/CNF composite films with a CNF content of 4%appeared to have the optimal electrochemical performance,with an area specific capacitance of 56 mF/cm^(2) and prominent capacitance retention of 95.6%at a current density of 1 A/g after 1000 cycles.This work demonstrated that the prepared Co_(3)O_(4)/graphene/CNF flexible composite films have great application potential in the field of flexible energy storage devices.

Pioneering the direct large-scale laser printing of flexible“graphenic silicon”self-standing thin films as ultrahigh-performance lithium-ion battery anodes

Recent technological advancements,such as portable electronics and electric vehicles,have created a pressing need for more efficient energy storage solutions.Lithium-ion batteries(LIBs)have been the preferred choice for these applications,with graphite being the standard anode material due to its stability.However,graphite falls short of meeting the growing demand for higher energy density,possessing a theoretical capacity that lags behind.To address this,researchers are actively seeking alternative materials to replace graphite in commercial batteries.One promising avenue involves lithiumalloying materials like silicon and phosphorus,which offer high theoretical capacities.Carbon-silicon composites have emerged as a viable option,showing improved capacity and performance over traditional graphite or pure silicon anodes.Yet,the existing methods for synthesizing these composites remain complex,energy-intensive,and costly,preventing widespread adoption.A groundbreaking approach is presented here:the use of a laser writing strategy to rapidly transform common organic carbon precursors and silicon blends into efficient“graphenic silicon”composite thin films.These films exhibit exceptional structural and energy storage properties.The resulting three-dimensional porous composite anodes showcase impressive attributes,including ultrahigh silicon content,remarkable cyclic stability(over 4500 cycles with∼40%retention),rapid charging rates(up to 10 A g^(-1)),substantial areal capacity(>5.1 mAh cm^(-2)),and excellent gravimetric capacity(>2400 mAh g^(-1) at 0.2 A g^(-1)).This strategy marks a significant step toward the scalable production of high-performance LIB materials.Leveraging widely available,cost-effective precursors,the laser-printed“graphenic silicon”composites demonstrate unparalleled performance,potentially streamlining anode production while maintaining exceptional capabilities.This innovation not only paves the way for advanced LIBs but also sets a precedent for transforming various materials into high-performing electrodes,promising reduced complexity and cost in battery production.