Calculation of angular glint in near field utilizing graphical electromagnetic computing

The angular glint in the near field plays an important role on radar tracking errors. To predict it more efficiently for electrically large targets, a new method based on graphical electromagnetic computing （GRECO） is proposed. With the benefit of the graphic card, the GRECO prediction method is faster and more accurate than other methods. The proposed method at the first time considers the special case that the targets cannot be completely covered by radar beams, which makes the prediction of radar tracking errors more self-contained in practical circumstances. On the other hand, the process of the scattering center extraction is omitted, resulting in possible angular glint prediction in real time. Comparisons between the simulation results and the theoretical ones validate its correctness and value to academic research and engineering applications.

Development of Combined Trochoidal Profile of a Gerotor Pump

Gerotor pumps are a kind of internal gear pump, widely used in applications of lubricating system of on-road or off-road engines. Normally their outer rotors are the circular arc profile while their inner rotor profile is the conjugate curve of the outer rotor. This research focuses on how to derive the combined trochoidal profile of a gerotor pump. The hypocycloidal and epicycloidal profile of the inner rotor is generated at first. And then the profile of the outer rotor, based on the inner rotor profile, is obtained by analytical approach and computationally graphical approach. The paper provides feasibility to develop the unconventional profile of a gerotor pump.

RCS Reduction of Airborne Dispenser

The radar cross section (RCS) of dispenser and its components is computed by graphical electromagnetic computing (GRECO) method, which bases on physical optics (PO) method. A satisfied agreement is gotten between computed and measured results outdoor. The results show that the main scattering source of the dispenser is the mirror reflecting of the body; in the most crucial nose-on region, the nose mirror reflecting plays important role; the corner reflecting is important to the fins' RCS. The corresponding measures to reduce dispenser's RCS are proposed. It is indicated that to reduce RCS, shaping should be adopts first, while aerodynamic characteristics and stealth characteristics should be considered synthetically during the design of dispenser.

Office Furniture Design for Wheelchair User

There are an estimated 1.19 million wheelchair users in Spain. People use wheelchairs for a variety of reasons, the most common one is paralysis from spinal cord injuries. Current estimates indicate there are around 504,000 people alive in Spain with spinal cord injuries. Among other reasons for using wheelchairs are： fatigue from multiple sclerosis, muscle weakness from muscular dystrophy, lower limb spasticity from cerebral palsy, and missing limbs due to amputation. People who use wheelchairs may encounter a variety of obstacles at their workstations depending on their limitations. Some possible accommodations could be adjustable height desk or table for a person who cannot work comfortably at an existing desk, accessible filing system or office supplies, and frequently used materials on most accessible shelves or drawers for a person who cannot reach upper and lower shelves and drawers. This paper presents the graphical design of a workstation for wheelchair users, in this case, technical, anthropometric, ergonomic, aesthetics and scientists aspects have been analyzed. The design of composite structure conduct to explicit safety constraints applied to office furniture requirements kept continuously current and updated as part of innovation. Finally, results are showed in a three-dimensional model.

Real-time flow-based video abstraction using OpenCL

A non-photorealistic rendering technique is a method to show various effects different from those of realistic image generation.Of the various techniques,flow-based image abstraction displays the shape and color features well and performs a stylistic visual abstraction.But real-time rendering is impossible when CPU is used because it applies various filtering and iteration methods.In this paper,we present real-time processing methods of video abstraction using open open computing language(OpenCL),technique of general-purpose computing on graphics processing units(GPGPU).Through the acceleration of general-purpose computing(GPU),16 frame-per-second(FPS)or greater is shown to process video abstraction.

Geometric Optimization Design System Incorporating Hybrid GRECO-WM Scheme and Genetic Algorithm

This article seeks to outline an integrated and practical geometric optimization design system （GODS） incorporating hybrid graphical electromagnetic computing-wedge modeling （GRECO-WM） scheme and the genetic algorithm （GA） for calculating the radar cross section （RCS） and optimizing the geometric parameters of a large and complex target respectively. A new wedge modeling （WM） scheme is presented for calculating the high-frequency RCS of wedge with only one visible facet based on the method of equivalent currents （MEC）. The applications of GODS to 2D cross-section and 3D surface are respectively implemented by choosing an average of monostatic RCS values corresponding to a series of incident angles over a frequency band as the optimum objective function. And the results demonstrate that the RCS can be effectively and conveniently reduced by the GODS presented in this article.

An MPI+OpenACC-Based PRM Scalar Advection Scheme in the GRAPES Model over a Cluster with Multiple CPUs and GPUs

A moisture advection scheme is an essential module of a numerical weather/climate model representing the horizontal transport of water vapor.The Piecewise Rational Method(PRM) scalar advection scheme in the Global/Regional Assimilation and Prediction System(GRAPES) solves the moisture flux advection equation based on PRM.Computation of the scalar advection involves boundary exchange,and computation of higher bandwidth requirements is complicated and time-consuming in GRAPES.Recently,Graphics Processing Units(GPUs) have been widely used to solve scientific and engineering computing problems owing to advancements in GPU hardware and related programming models such as CUDA/OpenCL and Open Accelerator(OpenACC).Herein,we present an accelerated PRM scalar advection scheme with Message Passing Interface(MPI) and OpenACC to fully exploit GPUs’ power over a cluster with multiple Central Processing Units(CPUs) and GPUs,together with optimization of various parameters such as minimizing data transfer,memory coalescing,exposing more parallelism,and overlapping computation with data transfers.Results show that about 3.5 times speedup is obtained for the entire model running at medium resolution with double precision when comparing the scheme’s elapsed time on a node with two GPUs(NVIDIA P100) and two 16-core CPUs(Intel Gold 6142).Further,results obtained from experiments of a higher resolution model with multiple GPUs show excellent scalability.

Implementation of the moving particle semi-implicit method on GPU

The Moving Particle Semi-implicit (MPS) method performs well in simulating violent free surface flow and hence becomes popular in the area of fluid flow simulation. However, the implementations of searching neighbouring particles and solving the large sparse matrix equations (Poisson-type equation) are very time-consuming. In order to utilize the tremendous power of parallel computation of Graphics Processing Units (GPU), this study has developed a GPU-based MPS model employing the Compute Unified Device Architecture (CUDA) on NVIDIA GTX 280. The efficient neighbourhood particle searching is done through an indirect method and the Poisson-type pressure equation is solved by the Bi-Conjugate Gradient (BiCG) method. Four different optimization levels for the present general parallel GPU-based MPS model are demonstrated. In addition, the elaborate optimization of GPU code is also discussed. A benchmark problem of dam-breaking flow is simulated using both codes of the present GPU-based MPS and the original CPU-based MPS. The comparisons between them show that the GPU-based MPS model outperforms 26 times the traditional CPU model.

Real-time 3D Microtubule Gliding Simulation Accelerated by GPU Computing

A microtubule gliding assay is a biological experiment observing the dynamics of microtubules driven by motor proteins fixed on a glass surface. When appropriate microtubule interactions are set up on gliding assay experiments, microtubules often organize and create higher-level dynamics such as ring and bundle structures. In order to reproduce such higher-level dynamics on computers, we have been focusing on making a real-time 3D microtubule simulation. This real-time 3D microtubule simulation enables us to gain more knowledge on microtubule dynamics and their swarm movements by means of adjusting simulation paranleters in a real-time fashion. One of the technical challenges when creating a real-time 3D simulation is balancing the 3D rendering and the computing performance. Graphics processor unit （GPU） programming plays an essential role in balancing the millions of tasks, and makes this real-time 3D simulation possible. By the use of general-purpose computing on graphics processing units （GPGPU） programming we are able to run the simulation in a massively parallel fashion, even when dealing with more complex interactions between microtubules such as overriding and snuggling. Due to performance being an important factor, a performance n, odel has also been constructed from the analysis of the microtubule simulation and it is consistent with the performance measurements on different GPGPU architectures with regards to the number of cores and clock cycles.